Properties of the polyhydride anions [WH5(PMe2Ph)3]- and [ReH4(PMePh2)3]- and periodic trends in the acidity of polyhydride complexes

The new anionic complexes [K(18-crown-6)][WH5(PMe2Ph)3], [K(1,10-diaza-18-crown-6)][WH5(PMe2Ph)3], [K(2,2,2-crypt)][ReH4(PMePh2)3], and [K(1,10-diaza-18-crown-6)][ReH4(PMePh2)3] were prepared by reaction of KH/crown or KH/crypt with the appropriate neutral polyhydride WH6(PMe2Ph)3 or ReH5(PMePh2)3. The rate of deprotonation of the rhenium hydride in THF is much greater for the reaction involving crypt compared with that of crown. The structure of [ReH4(PMePh2)3]- is distorted pentagonal bipyramidal as determined by an X-ray diffraction study of the crypt salt. No hydridic-protonic M-H...HN bonding is detected between the hydrides of the anionic hydrides and the amino hydrogens of the cations [K(1,10-diaza-18-crown-6)]+ suggesting that stronger M-H...K interactions are present. Acid dissociation constants Ka of polyhydride complexes in THF, approximately corrected for ion pairing, are determined by NMR in order to better understand the periodic trends of metal hydrides. The pKalphaTHF of (WH6(PMe2Ph)3/[WH5(PMe2Ph)3]-) is 42+/-4 according to the equilibrium set up by reacting WH6(PMe2Ph)3 with [K(2,2,2-crypt)][ReH6(PCy3)2]. The pKalphaTHF for ReH5(PMePh2)3 can be estimated as greater than the pKalphaTHF of 38 for HNPh2 and less than the pKalphaTHF of 41 for ReH7(PCy3)2. Reaction of the phosphazene base P4-tBu with ReH7(PCy3)2 gave an equilibrium with [HP4-tBu]+[ReH6(PCy3)2]- whereas reaction with WH6(PMe2Ph)3 gave an equilibrium with [HP4-tBu]+[WH5(PMe2Ph)3]-. From these and a related equilibrium, the pKalphaTHF of [HP4-tBu]+ is found to be 40+/-4. In general, neutral complexes MHx(PR3)n (M=W, Re, Ru, Os, Ir; n=3, 2) studied to date have pKalphaTHF values from 30 to 44 on going from phenyl-substituted to alkyl-substituted phosphine ligands whereas MHx(PR3)n+ (M=Re, Fe, Ru, Os, Co, Rh, Ni, Pd, Pt; n=4, 3), including diphosphine ligands ((PR3)2=PR2-PR2), have values from 12 to 23. From the equilibrium established from the reaction of [HP2-tBu][BPh4] and [K(2,2,2-crypt)][OP(OEt)2NPh], [HP2-tBu]+ was calculated to have a pKalphaTHF of 30+/-4. The equilibrium constant for the similar deprotonation reaction with [K(18-crown-6)][{ReH2(PMePh2)2}2(mu-H)3] confirmed this value.     

Chemistry of 11-vertex rhodathiaboranes: reactions with monodentate phosphines

The reaction of [8,8-(PPh(3))(2)-nido-8,7-RhSB(9)H(10)] (1) with PR(3) in a 1:2 ratio affords mixtures that contain the mono-substituted bis-PR(3)-ligated rhodathiaboranes [8,8-(PPh(3))(L)-nido-8,7-RhSB(9)H(10)] [L = PMe(2)Ph (5), PMe(3) (6)] and the corresponding tris-PR(3)-ligated compounds [8,8,8-(L)(3)-nido-8,7-RhSB(9)H(10)] [L = PMe(2)Ph (7), PMe(3) (8)]. These latter species are more conveniently prepared from the reaction of 1 with three equivalents of the monodentate phosphines, PMe(2)Ph and PMe(3). Reaction between 1 and PMePh(2) in a 1:2 ratio yields the disubstituted rhodathiaborane [8,8-(PMePh(2))(2)-nido-8,7-RhSB(9)H(10)] (4), whereas the use of three equivalents of phosphine leads to the formation of B-ligated eleven-vertex [8,8,8-(PMePh(2))(2)(H)-nido-8,7-RhSB(9)H(9)-9-(PMePh(2))] (9). Compounds 4-9 have been characterized by NMR spectroscopy, and the structures of 8 and 9 confirmed by X-ray diffraction analyses. The characterization of the cluster compounds has been aided by the use of DFT calculations on some of the species. Variable-temperature NMR studies have demonstrated a lability of the PMePh(2) ligands in compounds 4 and 9, providing mechanistic insights about the ligand substitutional chemistry in these eleven-vertex rhodathiaboranes.     

In situ NMR observation of mono- and binuclear rhodium dihydride complexes using parahydrogen-induced polarization

Starting from the binuclear complex [RhCl(NBD)]2 (NBD = 2,5-norbornadiene) in the presence of the phosphines L = PMe3, PMe2Ph, PMePh2, PEt3, PEt2Ph, PEtPh2, or P(n-butyl)3, various mononuclear dihydrides of the type Rh(H)2CIL3, i.e., those of the homogeneous hydrogenation catalysts RhCIL3, have been obtained upon addition of parahydrogen, and their 1H NMR spectra have been investigated using parahydrogen-induced polarization (PHIP). Furthermore, the two binuclear complexes (H)(Cl)Rh(PMe3)2(mu-Cl)(mu-H)Rh(PMe3) and (H)(Cl)Rh(PMe2Ph)2(mu-Cl)(mu-H)Rh(PMe2Ph) have been detected and characterized by means of this in situ NMR method. Analogous complexes with trifluoroacetate instead of chloride, i.e., Rh(H)2(CF3COO)L3, have been generated in situ starting from Rh(NBD)(acac) in the presence of trifluoroacetic acid in combination with the phosphines L = PPh3, PEt2Ph, PEt3, and P(n-butyl)3, and their 1H NMR parameters have been determined.     

Olefin metatheses in metal coordination spheres: versatile new strategies for the construction of novel monohapto or polyhapto cyclic, macrocyclic, polymacrocyclic, and bridging ligands

The broad applicability of the title reaction is established through studies of neutral and charged, coordinatively saturated and unsaturated, octahedral and square planar rhenium, platinum, rhodium, and tungsten complexes with cyclopentadienyl, phosphine, and thioether ligands which contain terminal olefins. Grubbs' catalyst, [Ru(=CHPh)(PCy3)2(Cl)2], is used at 2-9 mol% levels (0.0095-0.00042 M, CH2-Cl2). Key data are as follows: [(eta5-C5H4(CH2)6CH=CH2)Re(NO)(PPh3)-(CH3)], intermolecular metathesis (95 %); [(eta5-C5H5)Re(NO)(PPh3)(E(CH2CH=CH2)2)]+ TfO (E=S, PMe, PPh), formation of five-membered heterocycles (96-64%; crystal structure E = PMe); [(eta5-C5Me5)Re(NO)(PPh((CH2)6CH=CH2)2)(L)]n+ nBF4-(L/n = CO/1, Cl/0), intramolecular macrocyclization (94-89%; crystal structure L= Cl); fac-[(CO)3Re(Br)(PPh2(CH2)6CH=CH2)2] and cis-[(Cl)2Pt(PPh2(CH2)6CH=CH2)2], intramolecular macrocyclizations (80-71%; crystal structures of each and a hydrogenation product); cis-[(Cl)2Pt(S(R)(CH2)6CH= CH2)2], intra-/intermolecular macrocyclization (R=Et, 55%/24%; tBu, 72%/ <4%); trans-[(Cl)(L)M(PPh2(CH2)6CH=CH2)2] (M/L = Rh/CO, Pt/C6F5) intramolecular macrocyclization (90-83%; crystal structure of hydrogenation product, M=Pt); fac-[W(CO)3(PPh((CH2)6CH=CH2)2)3], intramolecular trimacrocyclization (83 %) to a complex mixture of triphosphine, diphosphine/ monophosphine, and tris(monophosphine) complexes, from which two isomers of the first type are crystallized. The macrocycle conformations, and basis for the high yields, are analyzed.     

Effects of Cyclopentadienyl and Phosphine Ligands on the Basicities and Nucleophilicities of Cp'Ir(CO)(PR(3)) Complexes

Basicities of the series of complexes CpIr(CO)(PR(3)) [PR(3) = P(p-C(6)H(4)CF(3))(3), P(p-C(6)H(4)F)(3), P(p-C(6)H(4)Cl)(3), PPh(3), P(p-C(6)H(4)CH(3))(3), P(p-C(6)H(4)OCH(3))(3), PPh(2)Me, PPhMe(2), PMe(3), PEt(3), PCy(3)] have been measured by the heat evolved (DeltaH(HM)) when the complex is protonated by CF(3)SO(3)H in 1,2-dichloroethane (DCE) at 25.0 degrees C. The -DeltaH(HM) values range from 28.0 kcal/mol for CpIr(CO)[P(p-C(6)H(4)CF(3))(3)] to 33.2 kcal/mol for CpIr(CO)(PMe(3)) and are directly related to the basicities of the PR(3) ligands in the complexes. For the more basic pentamethylcyclopentadienyl analogs, the -DeltaH(HM) values range from 33.8 kcal/mol for the weakest base CpIr(CO)[P(p-C(6)H(4)CF(3))(3)] to 38.0 kcal/mol for the strongest CpIr(CO)(PMe(3)). The nucleophilicities of the Cp'Ir(CO)(PR(3)) complexes were established from second-order rate constants (k) for their reactions with CH(3)I to give [Cp'Ir(CO)(PR(3))(CH(3))](+)I(-) in CD(2)Cl(2) at 25.0 degrees C. There is an excellent linear correlation between the basicities (DeltaH(HM)) and nucleophilicities (log k) of the CpIr(CO)(PR(3)) complexes. Only the complex CpIr(CO)(PCy(3)) with the bulky tricyclohexylphosphine ligand deviates dramatically from the trend. In general, the pentamethylcyclopentadienyl complexes react 40 times faster than the cyclopentadienyl analogs. However, they do not react as fast as predicted from electronic properties of the complexes, which suggests that the steric size of the Cp ligand reduces the nucleophilicities of the CpIr(CO)(PR(3)) complexes. In addition, heats of protonation (DeltaH(HP)) of tris(2-methoxyphenyl)phosphine, tris(2,6-dimethoxyphenyl)phosphine, and tris(2,4,6-trimethylphenyl)phosphine were measured and used to estimate pK(a) values for these highly basic phosphines.     

Detection of platinum dihydride bisphosphine complexes and studies of their reactivity through para-hydrogen-enhanced NMR methods

In-situ NMR studies on the reactions of Pt{CH2 = CHSi(Me)2}2O)(PCy3) with phosphines, HSiEt3 and--hydrogen or Pt(L)(L')(Me)(2) alone enable the detection of cis-Pt(L)(L')(H)2 [L = PCy3 and L' = PCy2H, PPh3 or PCy3] which then undergo hydride site interchange and H2 reductive elimination on the NMR timescale.     

Synthesis and dehydrocoupling reactivity of iron and ruthenium phosphine-borane complexes

The Fe and Ru phosphine-borane complexes CpM(CO)2PPh2 x BH3 (1, M = Fe, 4, M = Ru) were synthesized utilizing the reaction of the phosphine-borane anion Li[PPh2 x BH3] with the iodo complexes CpM(CO)2I. The Fe complex 1 reacted with PMe3 to yield CpFe(CO)(PMe3)(PPh2 x BH3) (2) and CpFe(PMe3)2(PPh2 x BH3) (3) whereas the Ru species 4 gave only CpRu(CO)(PMe3)(PPh2 x BH3) (5). The complexes 1-5 were characterized by 1H, 11B, 13C and 31P NMR spectroscopy, MS, IR and X-ray crystallography for 1 to 4, and EA for 1, 2 and 4. The reactivity of 1 and 4 towards PPh2H x BH3 was explored. Although no stoichiometric reactions were detected under mild conditions, both 1 and 4 were found to function as dehydrocoupling catalysts to afford Ph2PH x BH2 x PPh2 x BH3 in the melt at elevated temperature (120 degrees C). The carbonyl Fe2(CO)9 also functioned as a dehydrocoupling catalyst under similar conditions. Complex 1 and Fe2(CO)9 represent the first reported active Fe complexes for the catalytic dehydrocoupling of phosphine-borane adducts.     

Synthesis and reactivity of dichloroboryl complexes of platinum(II)

The reaction between [Pt(nbe)3] (nbe=norbornene), two equivalents of the phosphines PPh3, PMePh2 or PMe2Ph and 1 equivalent of BCl3 affords the platinum dichloroboryl species [PtCl(BCl2)(PPh3)2], [PtCl(BCl2)(PMePh2)2] and [PtCl(BCl2)(PMe2Ph)2]. All three complexes were characterised by X-ray crystallography and reveal that the boryl group lies trans to the chloride. With PMe3 as the phosphine, the complex [PtCl(BCl2)(PMe3)2] is isolated in high yield as a white crystalline powder although crystals suitable for X-ray crystallography were not obtained. Crystals were obtained of a product shown by X-ray crystallography to be the unusual dinuclear species [Pt2(BCl2)2(PMe3)4(micro-Cl)][BCl4] which reveals an arrangement in which two square planar platinum(II) centres are linked by a single bridging chloride which is trans to a BCl2 group on each platinum centre. The reaction of [PtCl(BCl2)(PMe3)2] with NEt3 or pyridine (py) affords the adducts [PtCl{BCl2(NEt3)}(PMe3)2] and [PtCl{BCl2(py)}(PMe3)2], respectively, both characterised spectroscopically. The reaction between [PtCl(BCl2)(PMe3)2] and either 4 equivalents of NHEt2 or piperidine (pipH) results in the mono-substituted boryl species [PtCl{BCl(NEt2)}(PMe3)2] and [PtCl{BCl(pip)}(PMe3)2], respectively, the former characterised by X-ray crystallography. Treatment of either [PtCl(BCl2)(PMe3)2] (in the presence of excess NEt3) or [PtCl{BCl(NEt2)}(PMe3)2] with catechol affords the B(cat) (cat=catecholate) derivative [PtCl{B(cat)}(PMe3)2] which is also formed in the reaction between [Pt(PMe3)4] and ClB(cat) and also from the slow decomposition of [Pt{B(cat)}2(PMe3)2] in dichloromethane over a period of months. The compound [Pt{B(cat)}2(PMe3)2] was prepared from the reaction between [Pt(PMe3)4] and B2(cat)2.     

Solution and solid-state structural studies of epoxide adducts of cadmium phenoxides. Chemistry relevant to epoxide activation for ring-opening reactions

The reaction of Cd[N(SiMe(3))(2)](2) with 2 equiv of the corresponding phenol in toluene has led to the isolation of [Cd(O-2,6-R(2)C(6)H(3))(2)](2) derivatives, where R represents the sterically bulky (t)Bu and Ph substituents. The dimeric nature of these complexes in the solid state has been established via X-ray crystallography, i.e., trigonal geometry around cadmium is observed in 1 (R = (t)Bu) where the two cadmium centers are bridged by two phenoxides with each metal containing a terminal phenoxide. Complex 2 (R = Ph) contains an additional interaction of the metal centers with carbon atoms of the aromatic substituents on the phenoxide ligands. These dimeric structures are maintained in weakly coordinating solvents as revealed by (113)Cd NMR in d(2)-methylene chloride, which displays (111)Cd-(113)Cd coupling. Nevertheless, because of the excessive steric requirements of these phenoxide ligands, these dimers are easily disrupted in solution by weak donor ligands such as epoxides. Three bisepoxide adducts have been isolated as crystalline solids and characterized by X-ray crystallography. As previously observed in other Cd(O-2,6-(t)Bu(2)C(6)H(3))(2) x L(2) complexes, these epoxide adducts adopt a crystallographically imposed square-planar geometry about the cadmium centers, with the exception of the exo-2,3-epoxynorbornane derivative, which displays a distorted tetrahedral geometry. Temperature-dependent (113)Cd NMR studies have established that there is little difference in the binding abilities of these epoxides with either complex 1 or complex 2. Importantly, it is concluded from these studies that the lack of reactivity of alpha-pinene oxide and exo-2,3-epoxynorbornane toward copolymerization reactions with carbon dioxide, in the presence of zinc bisphenoxide catalysts, is not due to differences in epoxide metal binding. This is further affirmed by the isolation and crystallographic characterization of the very stable Zn(O-2,6-(t)Bu(2)C(6)H(3))(2) x (exo-2,3-epoxynorbornane)(2) derivative.     

Stoichiometric and catalytic reactivity of the N-heterocyclic carbene ruthenium hydride complexes [Ru(NHC)(L)(CO)HCl] and [Ru(NHC)(L)(CO)H(eta2-BH4)] (L=NHC, PPh3)

Thermolysis of [Ru(AsPh3)3(CO)H2] with the N-aryl heterocyclic carbenes (NHCs) IMes (1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), IPr (1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) or the adduct SIPr.(C6F5)H (SIPr=1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene), followed by addition of CH2Cl2, affords the coordinatively unsaturated ruthenium hydride chloride complexes [Ru(NHC)2(CO)HCl] (NHC=IMes , IPr , SIPr ). These react with CO at room temperature to yield the corresponding 18-electron dicarbonyl complexes . Reduction of and [Ru(IMes)(PPh3)(CO)HCl] () with NaBH4 yields the isolable borohydride complexes [Ru(NHC)(L)(CO)H(eta2-BH4)] (, L=NHC, PPh3). Both the bis-IMes complex and the IMes-PPh3 species react with CO at low temperature to give the eta1-borohydride species [Ru(IMes)(L)(CO)2H(eta1-BH4)] (L=IMes , PPh3), which can be spectroscopically characterised. Upon warming to room temperature, further reaction with CO takes place to afford initially [Ru(IMes)(L)(CO)2H2] (L=IMes, L=PPh3) and, ultimately, [Ru(IMes)(L)(CO)3] (L=IMes , L=PPh3). Both and lose BH3 on addition of PMe2Ph to give [Ru(IMes)(L)(L')(CO)H2](L=L'=PMe2Ph; L=PPh3, L'=PMe2Ph). Compounds and have been tested as catalysts for the hydrogenation of aromatic ketones in the presence of (i)PrOH and H2. For the reduction of acetophenone, catalytic activity varies with the NHC present, decreasing in the order IPr>IMes>SIMes.     

Large effects of ion pairing and protonic-hydridic bonding on the stereochemistry and basicity of crown-, azacrown-, and cryptand-222-potassium salts of anionic tetrahydride complexes of iridium(III)

The compounds [K(Q)][IrH(4)(PR(3))(2)] (Q = 18-crown-6, R = Ph, (i)Pr, Cy; Q = aza-18-crown-6, R = (i)Pr; Q = 1,10-diaza-18-crown-6, R = Ph, (i)Pr, Cy; Q = cryptand-222, R = (i)Pr, Cy) were formed in the reactions of IrH(5)(PR(3))(2) with KH and Q. In solution, the stereochemistry of the salts of [IrH(4)(PR(3))(2)](-) is surprisingly sensitive to the countercation: either trans as the potassium cryptand-222 salts (R = Cy, (i)Pr) or exclusively cis (R = Cy, Ph) as the crown- and azacrown-potassium salts or a mixture of cis and trans (R = (i)Pr). There is IR evidence for protonic-hydridic bonding between the NH of the aza salts and the iridium hydride in solution. In single crystals of [K(18-crown-6)][cis-IrH(4)(PR(3))(2)] (R = Ph, (i)Pr) and [K(aza-18-crown-6)][cis-IrH(4)(P(i)Pr(3))(2)], the potassium bonds to three hydrides on a face of the iridium octahedron according to X-ray diffraction studies. Significantly, [K(1,10-diaza-18-crown-6)][trans-IrH(4)(P(i)Pr(3))(2)] crystallizes in a chain structure held together by protonic-hydridic bonds. In [K(1,10-diaza-18-crown-6)][cis-IrH(4)(PPh(3))(2)], the potassium bonds to two hydrides so that one NH can form an intra-ion-pair protonic-hydridic hydrogen bond while the other forms an inter-ion-pair NH.HIr hydrogen bond to form chains through the lattice. Thus, there is a competition between the potassium and NH groups in forming bonds with the hydrides on iridium. The more basic P(i)R(3) complex has the lower N-H stretch in the IR spectrum because of stronger N[bond]H...HIr hydrogen bonding. The trans complexes have very low Ir-H wavenumbers (1670-1680) due to the trans hydride ligands. The [K(cryptand)](+) salt of [trans-IrH(4)(P(i)Pr(3))(2)](-) reacts with WH(6)(PMe(2)Ph)(3) (pK(alpha)(THF) 42) to give an equilibrium (K(eq) = 1.6) with IrH(5)(P(i)Pr(3))(2) and [WH(5)(PMe(2)Ph)(3)](-) while the same reaction of WH(6)(PMe(2)Ph)(3) with the [K(18-crown-6)](+) salt of [cis-IrH(4)(P(i)Pr(3))(2)](-) has a much larger equilibrium constant (K(eq) = 150) to give IrH(5)(P(i)Pr(3))(2) and [WH(5)(PMe(2)Ph)(3)](-); therefore, the tetrahydride anion displays an unprecedented increase (about 100-fold) in basicity with a change from [K(crypt)](+) to [K(crown)](+) countercation and a change from trans to cis stereochemistry. The acidity of the pentahydrides decrease in THF as IrH(5)(P(i)Pr(3))(2)/[K(crypt)][trans-IrH(4)(P(i)Pr(3))(2)] (pK(alpha)(THF) = 42) > IrH(5)(PCy(3))(2)/[K(crypt)][trans-IrH(4)(PCy(3))(2)] (pK(alpha)(THF) = 43) > IrH(5)(P(i)Pr(3))(2)/[K(crown)][cis-IrH(4)(P(i)Pr(3))(2)] (pK(alpha)(THF) = 44) > IrH(5)(PCy(3))(2)/[K(crown)][cis-IrH(4)(PCy(3))(2)]. The loss of PCy(3) from IrH(5)(PCy(3))(2) can result in mixed ligand complexes and H/D exchange with deuterated solvents. Reductive cleavage of P-Ph bonds is observed in some preparations of the PPh(3) complexes.     

Mixed phosphine and group-13 metal ligator complexes [(PR3)(a)M(ECp*)b] (M = Mo, Ni; E = Ga, Al; R = C6H5, cyclo-C6H11, CH3)

Treatment of [Mo(N(2))(PMe(3))(5)] with two equivalents GaCp* (Cp* = η(5)-C(5)(CH(3))(5)) leads to the formation of cis-[Mo(GaCp*)(2)(PMe(3))(4)] (1), while AlCp* did not react with this precursor. In addition, [Ni(GaCp*)(2)(PPh(3))(2)] (2a), [Ni(AlCp*)(2)(PPh(3))(2)] (2b), [Ni(GaCp*)(2)(PCy(3))(2)] (3a), [Ni(GaCp*)(2)(PMe(3))(2)] (3b), [Ni(GaCp*)(3)(PCy(3))] (4) and [Ni(GaCp*)(PMe(3))(3)] (5) have been prepared in high yields by a direct synthesis from [Ni(COD)(2)] and stoichiometric amounts of the ligands PR(3) and ECp* (E = Al, Ga), respectively. All compounds have been fully characterized by (1)H, (13)C, and (31)P NMR spectroscopy, elemental analysis and single crystal X-ray diffraction studies.     

Simply assembled and recyclable polymer-supported olefin metathesis catalysts

Polymer-supported ruthenium catalysts (PCy(3))(2)Ru(=C(H)Ph)Cl(2), (PCy(3))Ru(IMes)(=C(H)Ph)Cl(2), and (PCy(3))Ru(SIMes)(=C(H)Ph)Cl(2), where IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene and SIMes = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene, have been prepared and found to be effective "boomerang" catalysts for ring-closing metathesis. They are recyclable, show comparable or better reactivity than their homogeneous counterparts, tolerate functional groups, and perform very well with dienes and moderately well with highly hindered substrates.     

NMR studies of Ru(3)(CO)(10)(PMe(2)Ph)(2) and Ru(3)(CO)(10)(PPh(3))(2) and their H(2) addition products: detection of new isomers with complex dynamic behavior

The clusters Ru(3)(CO)(10)L(2), where L = PMe(2)Ph or PPh(3), are shown by NMR spectroscopy to exist in solution in at least three isomeric forms, one with both phosphines in the equatorial plane on the same ruthenium center and the others with phosphines in the equatorial plane on different ruthenium centers. Isomer interconversion for Ru(3)(CO)(10)(PMe(2)Ph)(2) is highly solvent dependent, with DeltaH decreasing and DeltaS becoming more negative as the polarity of the solvent increases. The stabilities of the isomers and their rates of interconversion depend on the phosphine ligand. A mechanism that accounts for isomer interchange involving Ru-Ru bond heterolysis is suggested. The products of the reaction of Ru(3)(CO)(10)L(2) with hydrogen have been monitored by NMR spectroscopy via normal and para hydrogen-enhanced methods. Two hydrogen addition products are observed with each containing one bridging and one terminal hydride ligand. EXSY spectroscopy reveals that both intra- and interisomer hydride exchange occurs on the NMR time scale. On the basis of the evidence available, mechanisms for hydride interchange involving Ru-Ru bond heterolysis and CO loss are proposed.     

Meso-porphyrinylphosphine oxides: mono- and bidentate ligands for supramolecular chemistry and the crystal structures of monomeric {[10,20-diphenylporphyrinatonickel(II)-5,15-diyl]-bis-[P(O)Ph(2)] and polymeric self-coordinated {[10,20-diphenylporphyrinatozinc(II)-5,15-diyl]-bis-[P(O)Ph(2)]}

A series of porphyrins substituted in one or two meso positions by diphenylphosphine oxide groups has been prepared by the palladium-catalyzed reaction of diphenylphosphine or its oxide with the corresponding bromoporphyrins. Compounds {MDPP-[P(O)Ph2]n} (M = H2, Ni, Zn; H2DPP = 5,15-diphenylporphyrin; n = 1, 2) were isolated in yields of 60-95%. The reaction is believed to proceed via the conventional oxidative addition, phosphination, and reductive elimination steps, as the stoichiometric reaction of eta(1)-palladio(II) porphyrin [PdBr(H2DPP)(dppe)] (H2DPP = 5,15-diphenylporphyrin; dppe = 1,2-bis(diphenylphosphino)ethane) with diphenylphosphine oxide also results in the desired mono-porphyrinylphosphine oxide [H2DPP-P(O)Ph2]. Attempts to isolate the tertiary phosphines failed due to their extreme air-sensitivity. Variable-temperature 1H NMR studies of [H2DPP-P(O)Ph2] revealed an intrinsic lack of symmetry, while fluorescence spectroscopy showed that the phosphine oxide group does not behave as a "heavy atom" quencher. The electron-withdrawing effect of the phosphine oxide group was confirmed by voltammetry. The ligands were characterized by multinuclear NMR and UV-visible spectroscopy, as well as mass spectrometry. Single-crystal X-ray crystallography showed that the bis(phosphine oxide) nickel(II) complex {[NiDPP-[P(O)Ph2]2} is monomeric in the solid state, with a ruffled porphyrin core and the two P=O fragments on the same side of the average plane of the molecule. On the other hand, the corresponding zinc(II) complex formed infinite chains through coordination of one Ph2PO substituent to the neighboring zinc porphyrin through an almost linear P=O...Zn unit, leaving the other Ph2PO group facing into a parallel channel filled with disordered water molecules. These new phosphine oxides are attractive ligands for supramolecular porphyrin chemistry.     

二羰基水杨醛肟铑配合物催化的苯乙烯常压氢甲酰化反应

用Rh~2(CO)~4Cl~2与水杨醛肟的钠盐反应合成了二羰基水杨醛肟铑配合物Rh(sox)(CO~2)(1)。在常压下研究了该配合物与膦或亚磷酸酯组成的体系对苯乙烯氢甲酰化反应的催化性能, 此体系对烯烃没有催化加氢作用, 产物醛的化学选择性均为100%。考察了膦的结构与用量对催化活性和选择性的影响, 双膦作配体时活性和选择性都高于单膦, 其中Rh(sox)(CO)~2-Ph~2P(CH~2)~3PPh~2体系的最高初活性(TON)可达1.60min^-^1, 2-苯基丙醛的选择性在90%以上。对反应的活性物种作了初步讨论。     

Catalytic hydrogenation by triruthenium clusters: a mechanistic study with parahydrogen-induced polarization

The reactivity of the cluster family [Ru(3)(CO)(12-x)(L)(x)] (in which L=PMe(3), PMe(2)Ph, PPh(3) and PCy(3), x=1-3) towards hydrogen is described. When x=2, three isomers of [Ru(3)(H)(mu-H)(CO)(9)(L)(2)] are formed, which differ in the arrangement of their equatorial phosphines. Kinetic studies reveal the presence of intra- and inter-isomer exchange processes with activation parameters and solvent effects indicating the involvement of ruthenium-ruthenium bond heterolysis and CO loss, respectively. When x=3, reaction with H(2) proceeds to form identical products to those found with x=2, while when x=1 a single isomer of [Ru(3)(H)(mu-H)(CO)(10)(L)] is formed. Species [Ru(3)(H)(mu-H)(CO)(9)(L)(2)] have been shown to play a kinetically significant role in the hydrogenation of an alkyne substrate through initial CO loss, with rates of H(2) transfer being explicitly determined for each isomer. A less significant secondary reaction involving loss of L yields a detectable product that contains both a pendant vinyl unit and a bridging hydride ligand. Competing pathways that involve fragmentation to form [Ru(H)(2)(CO)(2)(L)(alkyne)] are also observed and shown to be favoured by nonpolar solvents. Kinetic data reveal that catalysis based on [Ru(3)(CO)(10)(PPh(3))(2)] is the most efficient although [Ru(3)(H)(mu-H)(CO)(9)(PMe(3))(2)] corresponds to the most active of the detected intermediates.     

Synthesis and structural characterization of double metal cyanides of iron and zinc: catalyst precursors for the copolymerization of carbon dioxide and epoxides

Several synthetic approaches for the preparation of double metal cyanide (DMC) derivatives of iron(II) and zinc(II) are described. These include (1) metathesis reactions of ZnCl(2) or ZnI(2) with KCpFe(CN)(2)CO in aqueous solution, (2) reactions of KCpFe(CN)(2)CO and its phosphine-substituted analogues with Zn(CH(3)CN)(4)(BF(4))(2) and subsequent displacement of acetonitrile at the zinc centers by the addition of a neutral (phosphine) or anionic (phenoxide) ligand, and (3) reactions of the protonated HCpFe(CN)(2)(phosphine) complexes with Zn(N(SiMe(3))(2))(2), followed by the addition of phenols. All structures are based on a diamond-shaped planar arrangement of the Fe(2)(CN)(4)Zn(2) core with various appended ligands at the metal sites. Although attempts to replace the iodide ligands in [CpFe(mu-CN)(2)PPh(3)ZnI(THF)](2) with acetate using silver acetate failed, two novel cationic mixed-metal cyanide salts based on the [CpFe(PPh(3))(mu-CN)(2)Zn(NC(5)H(5))](2)(2+) framework were isolated from pyridine solution and their structures were defined by X-ray crystallography. The anionic ligand bound to zinc in these derivatives, which serve as an anionic polymerization initiator, was shown to be central to the catalytic copolymerization reaction of CO(2)/epoxide to provide polycarbonates and cyclic carbonates. The structurally stabilized phosphine-strapped complexes [CpFe(mu-CN)(2)Zn(X)THF](2)(mu-dppp), where X = I or phenolate, were shown to be thermally stable under the conditions (80 degrees C) of the copolymerization reaction by in situ infrared spectroscopy. Both of these derivatives were proposed to serve as mimics for the heterogeneous DMC catalysts in the patent literature, with the derivative where the initiator is a phenolate being more active for the production of polycarbonates.     

Half-sandwich 1,3-Di-t-butylcyclopentadienyl Rhodium Complexes Containing Sulfido Ligands

Interest in the coordination chemistry of organo-transition metal complexescontaining sulfur ligands is continuing because they are involved in important catalyticprocesses[1 ,2 ] ,particularly hydrodesulfurization and hydrogenation reactions[3] and theyundergo a variety of reaction with metal species[4～ 6] . Although half-sandwichpentamethylcyclopentadienyl complexes with sulfido ligands are well known,only threetypes of half-sandwich compounds with chelating oligosulfido ligands have beendes…     

Oxygen atom transfer reactions from dioxygen to phosphines via a bridging sulfur dioxide in a trinuclear cluster complex of rhenium, [(Ph(3)P)(2)N][Re(3)(mu(3)-S)(mu-S)(2)(mu-SO(2))Cl(6)(PMe(2)Ph)(3)

A trinuclear rhenium sulfide cluster complex, [(Ph(3)P)(2)N][Re(3)(mu(3)-S)(mu-S)(3)Cl(6)(PMe(2)Ph)(3)], synthesized from Re(3)S(7)Cl(7), dimethylphenylphosphine, and [(Ph(3)P)(2)N]Cl is readily converted to a bridging SO(2) complex, [(Ph(3)P)(2)N][Re(3)(mu(3)-S)(mu-S)(2)(mu-SO(2))Cl(6)(PMe(2)Ph)(3)], by reaction with O(2). The oxygen atoms on the SO(2) ligand react with phosphines or phosphites to form phosphine oxides or phosphates, and the original cluster complex is recovered. The reaction course has been monitored by (31)P NMR as well as by UV-vis spectroscopy. The catalytic oxygenation of PMePh(2) in the presence of the SO(2) complex shows that turnovers are 8 per hour at 23 degrees C in CDCl(3). The X-ray structures of the cluster complexes are described.