Bimetallic nickel and palladium complexes for catalytic applications

South Africa is a mineral-rich country and one area in which minerals can be very important is catalysis. Over an extended period of time, homogeneous catalysis has grown to become very useful, particularly in the chemical and pharmaceutical industries. The organometallic compounds required in the catalysis industry have advanced from metallocenes to an alternative in the form of a-diimines. Most a-diimines are prepared from iminopyridyl moieties and are most active with nickel and palladium transition metals. This review providesa history of homogeneous catalysis and a discussion on iminopyridines, with the main focus on the nickel and palladium complexes formed from them. There follows a discussion of the bimetallic nickel and palladium complexes in various catalytic applications such as Suzuki and Heck coupling, with the main focus on ethylene polymerisation. The limitations are addressed and possible solutions presented to overcome those challenges. Several reviews in the related topics are to be found in the literature but not the a-diimine with iminopyridines and bimetallic nickel and palladium metals.     

Pincer-like amido complexes of platinum, palladium, and nickel

The ligands bis(8-quinolinyl)amine (BQAH, 1), (2-pyridin-2-yl-ethyl)-(8-quinolinyl)amine (2-pyridin-2-yl-ethyl-QAH, 2), o-dimethylaminophenyl(8-quinolinyl)amine (o-(NMe2)Ph-QAH, 3), and 3,5-dimethylphenyl(8-quinolinyl)amine (3,5-Me2Ph-QAH, 4) have been prepared in high yield from aryl halide and amine precursors by palladium-catalyzed coupling reactions. Deprotonation of 1 with nBuLi in toluene affords the lithium amide complex [Li][BQA] (5), whose dimeric solid-state crystal structure is presented. Lithium amide 5 was transmetalated by TlOTf to afford the thallium(I) amido complex [Tl][BQA] (6). An X-ray structural study of 6 shows it to be a 1:1 complex of the BQA ligand and Tl. Entry into the group 10 chemistry of the parent ligand 1 was effected by both protolytic and metathetical strategies. Thus, the divalent chloride complexes (BQA)PtCl (7), (BQA)PdCl (8), and (BQA)NiCl (9) were prepared and fully characterized. An X-ray structural study for each of these three complexes shows them to be well-defined, square-planar complexes in which the auxiliary BQA ligand binds in a planar, eta(3)-fashion. For comparison, the reactivity of ligands 2-4 with (COD)PtCl2 was studied. While reaction with ligand 2 afforded an ill-defined product mixture, ligands 3 and 4 reacted with (COD)PtCl2 to generate the unusual alkyl complexes (o-(NMe2)Ph-QA)Pt(1,2-eta(2)-6-sigma-cycloocta-1,4-dienyl) (10) and (3,5-Me2Ph-QA)Pt(1,2-eta(2)-6-sigma-cycloocta-1,4-dienyl) (11), both of which have been structurally characterized.     

Nitronyl-nitroxide PCP-pincer complexes of palladium and nickel: synthesis and an EPR study

Russian Chemical Bulletin - The possibility of the application of nitronyl-nitroxide ligand (NIT) as a spin label for the study of the composition of transition metals complexes with M-NIT bonds by...     

Mononuclear and dinuclear palladium and nickel complexes of phosphinimine-based tridentate ligands

The tridentate bis-phosphinimine ligands O(1,2-C(6)H(4)N=PPh(3))(2)1, HN(1,2-C(2)H(4)N=PR(3))(2) (R = Ph 2, iPr 3), MeN(1,2-C(2)H(4)N=PPh(3))(2)4 and HN(1,2-C(6)H(4)N=PPh(3))(2)5 were prepared. Employing these ligands, monometallic Pd and Ni complexes O(1,2-C(6)H(4)N=PPh(3))(2)PdCl(2)6, RN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][Cl] (R = H 7, Me 8), [HN(1,2-CH(2)CH(2)N=PiPr(3))(2)PdCl][Cl] 9, [MeN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][PF(6)] 10, [HN(1,2-CH(2)CH(2)N=PPh(3))(2)NiCl(2)] 11, [HN(1,2-CH(2)CH(2)N=PR(3))(2)NiCl][X] (X = Cl, R = iPr 12, X = PF(6), R = Ph 13, iPr 14), and [HN(1,2-C(6)H(4)N=PPh(3))(2)Ni(MeCN)(2)][BF(4)]Cl 15 were prepared and characterized. While the ether-bis-phosphinimine ligand 1 acts in a bidentate fashion to Pd, the amine-bis-phosphinimine ligands 2-5 act in a tridentate fashion, yielding monometallic complexes of varying geometries. In contrast, initial reaction of the amine-bis-phosphinimine ligands with base followed by treatment with NiCl(2)(DME), afforded the amide-bridged bimetallic complexes N(1,2-CH(2)CH(2)N=PR(3))(2)Ni(2)Cl(3) (R = Ph 16, iPr 17) and N(1,2-C(6)H(4)N=PPh(3))(2)Ni(2)Cl(3)18. The precise nature of a number of these complexes were crystallographically characterized.     

Solid-supported cross-coupling catalysts derived from homogeneous nickel and palladium coordination complexes

Solid-supported catalysts derived from homogeneous nickel(II) and palladium(II) non-symmetrical salen-type coordination complexes have been prepared and shown to be effective in the heterogeneous catalysis of carbon-carbon cross-coupling reactions. The nickel catalyst has been used in room-temperature Tamao-Kumada-Corriu reactions and the palladium catalyst in the Heck reaction at elevated temperatures. The complexes were prepared by improved methods and characterised by spectroscopic techniques. Comparisons between the solid-supported catalysts and their homogeneous analogues are reported. The single-crystal structure determination of the nickel and palladium complexes [M(salenac-OH)][M = Ni, Pd; salenac-OH = 9-(2',4'-dihydroxyphenyl)-5,8-diaza-4-methylnona-2,4,8-trienato](2-)] is reported.     

Asymmetric reductive ring-opening of bicyclic olefins catalyzed by palladium and nickel complexes

[reaction: see text] Asymmetric reductive ring opening of oxa- and azabenzonorbornadienes with organic acids and zinc powder under mild conditions catalyzed by Ni(binap)Cl(2) or Pd(binap)I(2) produces the corresponding 1,2-dihydronaphth-1-ols in good to excellent yields with high enantioselectivity.     

Polymerization of hex-1-ene initiated by diimine complexes of nickel and palladium

The effect of monomer concentration, reaction temperature and initiator structure on the activity, molar mass, branching and thermal properties of poly(hex-1-ene)s was investigated for the polymerization of hex-1-ene initiated by four α-diimine complexes of nickel and palladium. Hex-1-ene polymerization exhibits an apparent negative kinetic order with respect to monomer concentration. Polymerization of hex-1-ene initiated by MAO activated 1,4-bis(2,6-diisopropylphenyl)acenaphtenediiminenickel(II) dibromide (1a/MAO) proceeds in living-like fashion not only at sub-zero temperatures but even at 20 °C. However, molar masses of the polymers are higher than predicted values in agreement with an initiator efficiency lower than one.     

A remarkable skeletal rearrangement of a coordinated tetrapyrrole: chemical consequences of palladium pi-coordination to a bilindione.

Pd4(OEB)2, in which a [Pd2]2+ unit is bound in pi-fashion to olefinic sites that are exocyclic to pyrrole rings of the octaethylbilindione ligand, undergoes an unprecedented sequence of reactions that results in the rearrangement of the framework of the bilindione ligand and the formation of trans-Pd(py)2I2. This process of bilindione rearrangement and oxidation occurs as a direct consequence of the pi-coordination of the palladium. The reaction results in the migration of a nitrogen atom from a pyrrole carbon atom to what was formerly a meso carbon atom to transform a former pyrrole ring into a six-membered ring. This process also involves cleavage of the Pd-Pd and Pd-C bonds, oxidation of palladium, and introduction of an oxygen atom (from water) not necessarily in this particular sequence.     

Absorption and fluorescence spectra of open-chain tetrapyrrole pigments–bilirubins,biliverdins, phycobilins,and synthetic analogues

Open-chain tetrapyrroles are ubiquitous and abundant in living organisms (algae, animals, bacteria, and plants), including examples such as bilirubin, biliverdin, phycocyanobilin, phycoerythrobilin, and urobilin. The open-chain tetrapyrroles, collectively termed bilins, arise from biosynthesis or degradation of tetrapyrrole macrocycles. Bilins are now known to play a wide variety of biological roles encompassing light-harvesting (in phycobiliproteins), photomorphogenesis, signaling, and redox chemistry. The absorption spectra of bilins spans the ultraviolet (UV), visible, to near-infrared (NIR) regions depending on the degree of conjugation, thereby providing a wide range of colors from red/orange to blue/green. The fluorescence intensity of bilins is often quite low and hence fewer spectra are available, but can be increased substantially by structural rigidification, as evidenced by the wide use of biliproteins as fluorescent labels. The present article describes a database of absorption and fluorescence spectra of bilins from natural and synthetic origins for 220 compounds (270 absorption and 13 fluorescence spectral traces). Spectral traces of bilins published over the past ∼50 years have been digitized and assembled along with information concerning solvent, photochemical properties (molar absorption coefficient and fluorescence quantum yield), and literature references. The spectral traces (xy-coordinate data files) can be viewed, downloaded, and accessed at www.photochemcad.com. The accessibility of spectral traces in digital format should facilitate identification and quantitative calculations of interest in diverse scientific areas.     

Reactivity differences between nickel and palladium complexes bearing 1,2-diphosphino-1,2-dicarba-dodecaborane ligand

AgOTf (OTf = trifluoromethanesulfonate) shows the reactivity differences when it reacts with carborane complexes [MCl₂{(PPh₂)₂(C₂B₁₀H₁₀)}] (M = Ni (2), Pd (3)). The reaction of AgOTf with the palladium complex 3 affords [Pd₂(μ-OTf)₂{(PPh₂)₂(C₂B₉H₁₀)}₂] (4) in high yields, while corresponding reaction between the nickel complex 2 and AgOTf leads to the formation of binuclear complexes [Ni{(PPh₂)₂(C₂B₉H₁₀)}](μ-Cl)₂[Ag{(PPh₂)₂(C₂B₁₀H₁₀)}] (5) and [Ag₂(μ-Cl)₂ {(PPh₂)₂ (C₂B₁₀H₁₀)}₂] (6). The carborane cage of complexes 4 and 5 were broken to form nido-carboranes. It is believed the group 10 metals themselves play an important role in opening the closo-carborane skeleton. Directly stirring [(PPh₂)₂(C₂B₁₀H₁₀)] with AgOTf afforded [Ag₂(μ-OTf)₂{(PPh₂)₂(C₂B₁₀H₁₀)}₂] (7), which is also used to react with 2 and 3. The reaction between 2 and 7 gives only 4 in high yields, however, stirring the mixture of 3 and 7 affords [Pd₂(μ-Cl)₂{(PPh₂)₂(C₂B₉H₁₀)}₂] (8), [Pd{(PPh₂)₂(C₂B₉H₁₀)}₂] (9) and 6. All these complexes have been characterized by IR, ¹H NMR, ¹¹B NMR and elemental analyses. Complexes 2, 4-9 have also been determined by single-crystal X-ray diffraction analyses.     

镍及钯错合物催化1,3-双烯化合物之加成反应

在镍及钯错化合物之催化下, 有机试剂RX, R'MX可与1,3-双烯反应, 形成1,4-加成之产物, 如所使用之1,3-双烯为环状且无PPh3存在下时, 加成的产物为顺式的构造。在2当量之PPh3下, 1,4-加成的产物为反应的构造。     

Redox characteristics of manganese and cobalt complexes obtained from pyridine N-oxide

Manganese and cobalt complexes, using pyridine N-oxide as ligand, have been synthesized, and their cyclic and square-wave voltammetric measurements have been carried out. The results reveal that the complexes exhibit different voltammetric pattern, which suggests that the redox processes are most probably metal-centered. In both complexes, extra redox activity is observed once the potential exceeds certain value of the voltage. The observation of an oxidation wave in manganese complex at + 0.75 V vs. Ag/AgCl or + 0.95 V vs. NHE strongly suggests that this complex can bring about oxidation of water and can, thus, serve as a synthetic analogue of water oxidizing complex (WOC) of PS II.     

Synthesis of palladium(II) and nickel(II) complexes with tetrabenzoporphine

Palladium and nickel complexes with tetrabenzoporphine were synthesized by reacting tetrabenzoporphine and cadmium tetrabensoporphine with palladium and nickel chlorides in boiling dimethylformamide and identified.     

2-(N-Alkylcarboxamide)-6-iminopyridyl palladium and nickel complexes: coordination chemistry and catalysis

The 2-(N-alkylcarboxamide)-6-iminopyridine ligands (L1-L7) can bind as either mono-anionic tridentate N^N^N ligands on reaction with PdCl(2)(CH(3)CN)(2), to form complexes LPdCl (C1-C7), or as neutral tridentate N^N^O ligands with NiCl(2)·6H(2)O, to produce complexes LNiCl(2) (C8-C14). All metal complexes were characterized by IR spectroscopy and elemental analysis, and in the case of the palladium complexes, by (1)H and (13)C NMR spectroscopy. The crystal structures of C3, C4, C6, C10, and C12 were determined by X-ray crystallography, and revealed a distorted square geometry around the palladium centre, whereas for nickel, a distorted square-pyramidal geometry was adopted. The representative palladium complex (C3) was further reacted with AgBF(4) in acetonitrile affording the salt [L3Pd(CH(3)CN)][BF(4)] (C15) and the structure of this was confirmed by single-crystal X-ray diffraction. By contrast, carrying out the reaction in dichloromethane rather than acetonitrile, in the presence of malononitrile (CNCH(2)CN), resulted in the formation of the bimetallic palladium complex [L3Pd(CNCH(2)CN)PdL3]·2[BF(4)] (C16). Upon activation with diethylaluminium chloride, all the nickel complexes showed high activity for ethylene dimerization. Furthermore, the palladium complexes exhibited good activities in the vinyl-polymerization of norbornene upon activation with MAO.     

Synthesis of cationic hydride and related complexes of palladium and nickel with tricyclohexylphosphine or triisopropylphosphine

The preparation and characterization of a series of cationic hydride complexes of palladium and nickel of the type [MH(L)(PCy₃)₂]BPh₄ (M = Pd, Ni; L = pyridines, pyrazole, imidazole; Cy = cyclohexyl; Ph = phenyl) from new hydride complexes, trans-MH(NO)₃(PCy₃)₂ are described. Trans-PdH(NO₃)(PCy₃)₂ is prepared conveniently by treatment of Pd(NO₃)₂(PCy₃)₂ (yellow form) with NaBH₄ (yield 93%). The relative stability of the nickel triad hydride complexes is discussed.Preparation of PdHCl(PR₃)₂ (R = Cy or i-Pr = isopropyl) by a new method and their derivatives are also reported.     

Highly fluorous complexes of nickel, palladium and platinum: solubility and catalysis in high pressure CO2

A variety of Group 10 metal complexes [MXY(dfppp)], M = Ni, X, Y = Cl, Br, M = Pd, Pt, X, Y = Cl or CH(3), containing the recently reported highly fluorous diphosphine ligand, dfppp, 1,3-bis[di(fluoroponytail)phosphino]propane, {(p-F(13)C(6)C(6)H(4))(2)P}(2)(CH(2))(3) have been synthesised. They have been characterised by NMR, mass spectrometry and microanalysis, with two platinum complexes, [PtCl(2)(dfppp)] and [PtClMe(dfppp)], structurally characterised by single crystal X-ray diffraction studies. The highly fluorous nature of the ligands affords the complexes good supercritical CO(2) solubility as measured by supercritical fluid extraction (SFE), and has allowed for the copolymerisation of CO and ethylene using [PdClMe(dfppp)] as the catalyst precursor and CO(2) as the solvent. Additionally, PtCl(2) complexes of the new ligands dfppb, {(p-F(13)C(6)C(6)H(4))(2)P}(2)(CH(2))(4), and dfpop, {(p-F(13)C(6)C(6)H(4)O)(2)P}(2)(CH(2))(3), have also been prepared and characterised.     

Enantioselective alpha-arylation of ketones with aryl triflates catalyzed by difluorphos complexes of palladium and nickel

The asymmetric alpha-arylation of ketones with aryl triflates is described, and the use of this electrophile with nickel and palladium catalysts containing a segphos derivative increases substantially the scope of highly enantioselective arylations of ketone enolates. The combination of aryl triflates as reactant, difluorphos as ligand, palladium catalysts for reactions of electron-neutral or electron-rich aryl triflates, and nickel catalysts for reactions of electron-poor aryl triflates led to a series of alpha-arylations of tetralone, indanone, cyclopentanone, and cyclohexanone derivatives. Enantioselectivities ranged from 70% to 98% with 10 examples over 90%. Systematic studies on these alpha-arylations have revealed a number of factors that affect enantioselectivity. Ligands containing biaryl backbones with smaller dihedral angles generate catalysts that react with higher enantioselectivity than related ligands with larger dihedral angles. In addition, faster rates for reactions of aryl triflates versus those for reactions of aryl bromides allow the alpha-arylations of aryl triflates to be conducted at lower temperatures, and this lower temperature improves enantioselectivity. Finally, studies that compare the enantioselectivities of catalytic reactions to those of stoichiometric reactions of isolated [(segphos)Pd(Ar)(Br)], [(segphos)Pd(Ar)(I)], and [(segphos)Ni(C6H4-4-CN)Br] suggest that catalyst decomposition affects enantioselectivity.     

Redox,transmetalation, and stacking properties of tetrathiafulvalene-2,3,6,7-tetrathiolate bridged tin,nickel, and palladium compounds

Here we report that capping the molecule TTFtt (TTFtt = tetrathiafulvalene-2,3,6,7-tetrathiolate) with dialkyl tin groups enables the isolation of a stable series of redox congeners and facile transmetalation to Ni and Pd. TTFtt has been proposed as an attractive building block for molecular materials for two decades as it combines the redox chemistry of TTF and dithiolene units. TTFttH₄, however, is inherently unstable and the incorporation of TTFtt units into complexes or materials typically proceeds through the in situ generation of the tetraanion TTFtt⁴⁻. Capping of TTFtt⁴⁻ with Bu₂Sn²⁺ units dramatically improves the stability of the TTFtt moiety and furthermore enables the isolation of a redox series where the TTF core carries the formal charges of 0, +1, and +2. All of these redox congeners show efficient and clean transmetalation to Ni and Pd resulting in an analogous series of bimetallic complexes capped by 1,2-bis(diphenylphosphino)ethane (dppe) ligands. Furthermore, by using the same transmetalation method, we synthesized analogous palladium complexes capped by 1,1′-bis(diphenylphosphino)ferrocene (dppf) which had been previously reported. All of these species have been thoroughly characterized through a systematic survey of chemical and electronic properties by techniques including cyclic voltammetry (CV), ultraviolet-visible-near infrared spectroscopy (UV-vis-NIR), electron paramagnetic resonance spectroscopy (EPR), nuclear magnetic resonance spectroscopy (NMR) and X-ray diffraction (XRD). These detailed synthetic and spectroscopic studies highlight important differences between the transmetalation strategy presented here and previously reported synthetic methods for the installation of TTFtt. In addition, the utility of this stabilization strategy can be illustrated by the observation of unusual TTF radical–radical packing in the solid state and dimerization in the solution state. Theoretical calculations based on variational 2-electron reduced density matrix methods have been used to investigate these unusual interactions and illustrate fundamentally different levels of covalency and overlap depending on the orientations of the TTF cores. Taken together, this work demonstrates that tin-capped TTFtt units are ideal reagents for the installation of redox-tunable TTFtt ligands enabling the generation of entirely new geometric and electronic structures.

Capping TTFtt enables facile transmetalation in three different oxidation states.