Kinetics and mechanistic studies of anticarcinogenic bisperoxovanadium(V) compounds: ligand substitution reactions at physiological pH and relevance to DNA interactions

Bisperoxovanadium(V) compounds with bidentate ligands have shown tumor growth inhibition by cleaving DNA. The kinetics and mechanisms of ligand substitution reactions of two bisperoxovanadium(V) compounds [VO(O(2))(2)(bpy)](-) (bpVbpy) and [VO(O(2))(2)(phen)](-) (bpVphen) with entering ligands picolinic acid (pic) and dipicolinic acid (dipic) at physiological pH are reported, and its relevance to their DNA-cleavage activities are discussed. The products of the ligand substitution reactions with pic and dipic are the monoperoxo complexes [VO(O(2))(pic)(2)](-) and [VO(O(2))(dipic)(H(2)O)](-), respectively. (51)V NMR experiments indicate that bpVphen is substantially more inert in aqueous solution than bpVbpy. As a result, bpVbpy is more prone to ligand substitution and subsequent conversion to monoperoxo species. The rate of reaction for bpVbpy was faster than that of bpVphen by an order of magnitude, indicating that the ancillary ligand plays an important role in ligand substitution reactions. The ligand substitution reactions of bpVbpy feature first-order dependence on both [pic](T) and [dipic](T) whereas the substitution kinetics of bpVphen feature saturation behavior with dipic. The substitution reactions of both bpVbpy and bpVphen with pic showed first-order dependence on [H(+)] whereas no acid dependence was observed for the reactions with dipic. Hydrogen peroxide was determined to be a competitive inhibitor with respect to dipic. The ligand substitution reaction mechanisms and the rate laws consistent with these results are presented. The substitution reactions with pic and dipic proceed through different mechanisms; the substitution reactions with dipic proceed via solvolysis as the first step in the mechanisms whereas the reactions with pic bypass solvolysis to go through a mixed ligand monoperoxo vanadium intermediate.     

Kinetics of the oxygenation of unsaturated organics with singlet oxygen generated from H2O2 by a heterogeneous molybdenum catalyst

A heterogeneous catalyst containing MoO42- exchanged on layered double hydroxides (Mo-LDHs) is used to produce 1O2 from H2O2, and with this dark 1O2, unsaturated hydrocarbons are oxidized in allylic peroxides. The oxidation kinetics are studied in detail and are compared with the kinetics of oxidation by 1O2, formed from H2O2 by a homogeneous catalyst. A model is proposed for the heterogeneously catalyzed 1O2 generation and peroxide formation. The model divides the reaction suspension in two compartments: (1) the intralamellar and intragranular zones of the LDH catalyst; (2) the bulk solution. The 2-compartment model correctly predicts the oxidant efficiency and peroxide yield for a series of olefin peroxidation reactions. 1O2 is generated at a high rate by the heterogeneous catalyst, but somewhat more 1O2 is lost by quenching with the heterogeneous catalyst than using the homogeneous catalyst. Quenching occurs mainly as a result of collision with the LDH hydroxyl surface, as is evidenced by using LDH supports containing strong 1O2 deactivators such as Ni2+. A total of 15 organic substrates were peroxidized on a preparative scale using the best Mo-LDH catalyst under optimal conditions.     

Kinetics and Mechanism of the Epoxidation of Alkyl-Substituted Alkenes by Hydrogen Peroxide, Catalyzed by Methylrhenium Trioxide

Epoxidations of alkyl-substituted alkenes, with hydrogen peroxide as the oxygen source, are catalyzed by CH(3)ReO(3) (MTO). The kinetics of 28 such reactions were studied in 1:1 CH(3)CN-H(2)O at pH 1 and in methanol. To accommodate the different requirements of these reactions, (1)H-NMR, spectrophotometric, and thermometric techniques were used to acquire kinetic data. High concentrations of hydrogen peroxide were used, so that diperoxorhenium complex CH(3)Re(O)(eta(2)-O(2))(2)(H(2)O), B, was the only predominant and reactive form of the catalyst. The reactions between B and the alkenes are about 1 order of magnitude more rapid in the semiaqueous solvent than in methanol. The various trends in reactivity are medium-independent. The rate constants for B with the aliphatic alkenes correlate closely with the number of alkyl groups on the olefinic carbons. The reactions become markedly slower when electron-attracting groups, such as halo, hydroxy, cyano, and carbonyl, are present. The rate constants for catalytic epoxidations with B and those reported for the stoichiometric reactions of dimethyldioxirane show very similar trends in reactivity. These findings suggest a concerted mechanism in which the electron-rich double bond of the alkene attacks a peroxidic oxygen of B. These data, combined with those reported for the epoxidation of styrene (a term intended to include related molecules with ring and/or aliphatic substituents) by B and by the monoperoxo derivative of MTO, suggest that all of the rhenium-catalyzed epoxidations occur by a common mechanism. The geometry of the system at the transition state can be inferred from these data, which suggest a spiro arrangement.     

Synthesis of sulfoxides by the hydrogen peroxide induced oxidation of sulfides catalyzed by iron tetrakis(pentafluorophenyl)porphyrin: scope and chemoselectivity

The oxidation of sulfides with H(2)O(2) catalyzed by iron tetrakis(pentafluorophenyl)porphyrin in EtOH is an efficient and chemoselective process. With a catalyst concentration 0.03-0.09% of that of the substrate, sulfoxides are obtained with yields generally around 90-95% of isolated product. With vinyl and allyl sulfides, no epoxidation is observed. With a catalyst concentration between 0.09% and 0.25% of that of the substrate, sulfones are obtained in almost quantitative yield and with the same high chemoselectivity observed in the synthesis of sulfoxides.     

Aqueous ferryl(IV) ion: kinetics of oxygen atom transfer to substrates and oxo exchange with solvent water

The aqueous iron(IV) ion, Fe(IV)(aq)O(2+), generated from O(3) and Fe(aq)(2+), reacts rapidly with various oxygen atom acceptors (sulfoxides, a water-soluble triarylphosphine, and a thiolatocobalt complex). In each case, Fe(IV)(aq)O(2+) is reduced to Fe(aq)(2+), and the substrate is oxidized to a product expected for oxygen atom transfer. Competition methods were used to determine the kinetics of these reactions, some of which have rate constants in excess of 10(7) M(-1) s(-1). Oxidation of dimethyl sulfoxide (DMSO) has k = 1.26 x 10(5) M(-1) s(-1) and shows no deuterium kinetic isotope effect, k(DMSO-d(6)) = 1.23 x 10(5) M(-1) s(-1). The Fe(IV)(aq)O(2+)/sulfoxide reaction is the product-forming step in a very efficient Fe(aq)(2+)-catalyzed oxidation of sulfoxides by ozone. This catalytic cycle, combined with labeling experiments in H(2)(18)O, was used to determine the rate constant for the oxo-group exchange between Fe(IV)(aq)O(2+) and solvent water under acidic conditions, k(exch) = 1.4 x 10(3) s(-1).     

Olefin epoxidation with hydrogen peroxide catalyzed by lacunary polyoxometalate [gamma-SiW10O34H2O2]4-

The tetra-n-butylammonium (TBA) salt of the divacant Keggin-type polyoxometalate [TBA](4)[gamma-SiW(10)O(34)(H(2)O)(2)] (I) catalyzes the oxygen-transfer reactions of olefins, allylic alcohols, and sulfides with 30 % aqueous hydrogen peroxide. The negative Hammett rho(+) (-0.99) for the competitive oxidation of p-substituted styrenes and the low value of (nucleophilic oxidation)/(total oxidation), X(SO)=0.04, for I-catalyzed oxidation of thianthrene 5-oxide (SSO) reveals that a strongly electrophilic oxidant species is formed on I. The preferential formation of trans-epoxide during epoxidation of 3-methyl-1-cyclohexene demonstrates the steric constraints of the active site of I. The I-catalyzed epoxidation proceeds with an induction period that disappears upon treatment of I with hydrogen peroxide. (29)Si and (183)W NMR spectroscopy and CSI mass spectrometry show that reaction of I with excess hydrogen peroxide leads to fast formation of a diperoxo species, [TBA](4)[gamma-SiW(10)O(32)(O(2))(2)] (II), with retention of a gamma-Keggin type structure. Whereas the isolated compound II is inactive for stoichiometric epoxidation of cyclooctene, epoxidation with II does proceed in the presence of hydrogen peroxide. The reaction of II with hydrogen peroxide would form a reactive species (III), and this step corresponds to the induction period observed in the catalytic epoxidation. The steric and electronic characters of III are the same as those for the catalytic epoxidation by I. Kinetic, spectroscopic, and mechanistic investigations show that the present epoxidation proceeds via III.     

Mechanism of hydrogen peroxide dismutation by a dimanganese catalase mimic: dominant role of an intramolecular base on substrate binding affinity and rate acceleration

Several modifications of the manganese coordination environment and oxidation states of a family of synthetic dimanganese complexes have been introduced in search of the structural features that promote high rates of hydrogen peroxide dismutation (catalase activity). The X-ray structure of reduced catalase (T thermophilus) reveals a dimanganese(II,II) site linked by three bridges: mu 13-glutamate-, mu-OH-, and mu-OH2. The roles of a bridging hydroxide vs mu-aqua and the carboxylate have been examined in the reduced Mn2(II,II) complexes, [(L1,2)Mn2(mu-O2CCH3)(mu-X)]2+ for X- = OH- (7A) or X = H2O (1-4), and their oxidized Mn2(III,III) analogues, [(L1,2)Mn2(mu-O)(O2CCH3)(OH)]+ (6) (L1 is N,N,N',N'-tetrakis(2-methylenebenzamidazolyl)-1,3-diaminopropan- 2-ol, and L2 is the tetrakis-N-ethylated analogue of L1, which has all amine protons replaced by ethyl groups). The steady-state catalase rate is first-order in concentration of both substrate and reduced catalyst and saturates at high peroxide concentrations in all cases, confirming peroxide/catalyst complex formation. No catalyst decomposition is seen after > 2000 turnovers. Catalysis proceeds via a ping-pong mechanism between the Mn2(II,II/III,III) redox states, involving complexes 6 and 7A/7A'. The Mn2(III,IV) oxidation state was not active in catalase activity. Replacement of the mu-aqua bridge by mu-hydroxide eliminates a kinetic lag phase in production of the O2 product, increases the affinity for substrate peroxide in the rate-limiting step as seen by a 5-fold. decrease in the Michaelis constant (KM), and accelerates the maximum rate (kcat) by 65-fold The kinetic and spectroscopic data are consistent with substrate deprotonation by the hydroxide bridge, yielding a hydroperoxyl bridge coordinated between the Mn ions (mu, eta 2 geometry, "end-on") as the basis for catalysis: mu-OH- + H2O2-->mu-O2H- + H2O. Binding of a second hydroxide ion to 7A causes a further increase in kcat by 4-fold with no further change in substrate affinity (KM). By contrast, free (noncoordinating) bases in solution have no effect on catalysis, thus establishing intramolecular sites for both functional hydroxide anions. Solution structural studies indicate that the presence of 2-5 equiv of hydroxide in solution leads to formation of a bishydroxide species, [(L1,2)Mn2(mu 13-O2CCH3)(OH)2], which in the presence of air or oxygen auto-oxidizes to yield complex 6, a Mn2(III,III)(mu-O) species. Complex 6 oxidizes H2O2 to O2 without a kinetic lag phase and is implicated as the active form of the oxidized catalyst. A maximum increase by 240-fold in catalytic efficiency (kcat/KM = 700 s-1 M-1) is observed with the bishydroxide species versus the aquo complex 1, or only 800-fold less efficient than the enzyme. Deprotonation of the amine groups of the chelate ligand L was shown not to be involved in the hydroxide effects because identical results were obtained using the catalyst with tetrakis(N-ethylated)-L. Uncoupling of the Mn(II) spins by protonation of the alkoxyl bridge (LH) was observed to lower the catalase activity. Comparisons to other dimanganese complexes reveals that the Mn2(II,II)/Mn2(III,III) redox potential is not the determining factor in the catalase rate of these complexes. Rather, rate acceleration correlates with the availability of an intramolecular hydroxide for substrate deprotonation and with binding of the substrate at the bridging site between Mn ions in the reductive O-O bond cleavage step that forms water and complex 6.     

固载离子液体刷/过氧磷钨酸盐催化剂催化H2O2选择性氧化硫醚

以二氧化硅为载体,合成了一种新型的双层离子液体刷固载过氧磷钨酸盐催化剂.采用元素分析、IR和SEM-EDAX等手段对催化剂进行了表征.室温下,考察了该催化剂催化30％(质量分数)H2O2溶液选择性氧化硫醚为亚砜或砜的催化性能.结果表明,该催化剂具有很高的催化活性和选择性.采用1.1倍H2O2时,反应选择性地生成亚砜,仅...     

The nickel-substituted quasi-Wells-Dawson-type polyfluoroxometalate,

A series of transition metal substituted polyfluorooxometalates (PFOM) [M(L)H2F6NaW17)55]q-, M= Zn2+ , Co2+, Mn2+, Fc2+, Ru2+, Ni2+ and V5+ and L=H2O, O2-, of quasi-Wells-Dawson structure, was synthesized. In the series prepared, only the nickel-substituted polyfluorooxometalate was capable of catalytic activation of hydrogen peroxide in biphasic reaction media, the reaction leading mainly to the selective epoxidation of alkenes and alkenols. The manganese-, cobalt-, ruthenium-, iron-, vanadium-, and zinc-substituted polyfluorooxometalates were catalytically inactive, although, except for the zinc polyfluorooxometalate, very significant catalase activity was observed. Oxidation of thianthrene showed that sulfoxides were oxidized more easily than sulfides. Kinetic profiles of cyclooctene epoxidation showed that the reaction was zero order in both cyclooctene and hydrogen peroxide. Hydrogen peroxide was consumed at a rate 40% higher than the rate of epoxidation of cyclooctene. The reaction appears to proceed through an intermediate peroxo/hydroperoxo species that was observed in the IR spectrum. Atomic absorption, IR and 19F NMR spectroscopy indicated that the [Ni(H2O)H2F6NaW17O55]9- compound was stable under reaction conditions.     

Chemoselective electrophilic oxidation of heteroatoms by hydroperoxy sultams

The synthesis of novel hydroperoxy sultams 1b-d and their potential as renewable chemoselective electrophilic oxidants for a wide range of nitrogen, sulfur, and phosphorus heteroatoms in nonaqueous media is described. Reactions of 1b,c with secondary amines 10f,g yielded the hydroxysultams 2b,c and nitrone 11f or radical 11g depending on the substrate and stoichiometry, while tertiary amines 10a-d gave amine oxides 11a-d. Compounds 1c,d oxidized various thioethers 12a-g to sulfoxides 13a-g smoothly that were isolated by chromatography in nearly quantitative yields. 1c was regenerated from 2c by treatment of the latter with acidified H2O2. Kinetic studies of the reaction of 1c with 1,4-thioxane 12f suggest that the reaction follows the second-order kinetics, first order in substrate and first order in oxidant with the second-order rate constant several orders of magnitude larger than that of the corresponding reaction with hydrogen peroxide and tert-butyl hydroperoxide without the need for any acid or heavy metal catalysts. The phosphines 14a,b were also oxidized by 1c to the respective phosphine oxides 15a,b readily in quantitative yields. The reactions may be conducted at ambient temperature or lower and appear to proceed via a nonradical mechanism. Reactions are sensitive to steric as well as electronic factors.     

Novel iron(III) porphyrazine complex. Complex speciation and reactions with NO and H2O2

The complex [iron(III) (octaphenylsulfonato)porphyrazine] (5-), Fe (III)(Pz), was synthesized. The p K a values of the axially coordinated water molecules were determined spectrophotometrically and found to be p K a 1 = 7.50 +/- 0.02 and p K a 2 = 11.16 +/- 0.06. The water exchange reaction studied by (17)O NMR as a function of the pH was fast at pH = 1, k ex = (9.8 +/- 0.6) x 10 (6) s (-1) at 25 degrees C, and too fast to be measured at pH = 10, whereas at pH = 13, no water exchange reaction occurred. The equilibrium between mono- and diaqua Fe (III)(Pz) complexes was studied at acidic pH as a function of the temperature and pressure. Complex-formation equilibria with different nucleophiles (Br (-) and pyrazole) were studied in order to distinguish between a five- (in the case of Br (-)) or six-coordinate (in the case of pyrazole) iron(III) center. The kinetics of the reaction of Fe (III)(Pz) with NO was studied as a model ligand substitution reaction at various pH values. The mechanism observed is analogous to the one observed for iron(III) porphyrins and follows an I d mechanism. The product is (Pz)Fe (II)NO (+), and subsequent reductive nitrosylation usually takes place when other nucleophiles like OH (-) or buffer ions are present in solution. Fe (III)(Pz) also activates hydrogen peroxide. Kinetic data for the direct reaction of hydrogen peroxide with the complex clearly indicate the occurrence of more than one reaction step. Kinetic data for the catalytic decomposition of the dye Orange II by H 2O 2 in the presence of Fe (III)(Pz) imply that a catalytic oxidation cycle is initiated. The peroxide molecule first coordinates to the iron(III) center to produce the active catalytic species, which immediately oxidizes the substrate. The influence of the catalyst, oxidant, and substrate concentrations on the reaction rate was studied in detail as a function of the pH. The rate increases with increasing catalyst and peroxide concentrations but decreases with increasing substrate concentration. At low pH, the oxidation of the substrate is not complete because of catalyst decomposition. The observed kinetic traces at pH = 10 and 12 for the catalytic cycle could be simulated on the basis of the obtained kinetic data and the proposed reaction cycle. The experimental results are in good agreement with the simulated ones.     

Toward the development of the direct and selective detection of nitrates by a bioinspired Mo-Cu system

The development of a new platform for the direct and selective detection of nitrates is described. Two thioether-based chemosensors and the corresponding sulfoxides and sulfones were prepared, and their photophysical properties were evaluated. Upon selective sulfoxidation of these thioethers with nitrates via an oxygen-transfer reaction promoted by a bioinspired Mo-Cu system, significant fluorescence shifts were measured. A selective response of these systems, discriminating between nitrate salts and H(2)O(2), was also shown.     

Epoxidation of allyl chloride with H_2O_2 on Ti-ZSM-5 prepared by the isomorphous substitution

The epoxidation of allyl chloride with H2O2 on Ti-ZSM-5 prepared by isomorphous substitution of HZSM-5 with TiCl4 gas was studied. The results show that Ti-ZSM-5 has a high catalytic efficiency for the epoxidation of allyl chloride. The H2O2 utilization reaches 99.50% when the allyl chloride/H2O2 molar ratio is > 1. The effect of solvent species, catalyst concentration, H2O2 and allyl chloride concentration and reaction temperature on the epoxidation was investigated simultaneously. It is found that methanol is the best solvent for the reaction. The reaction rate equation with v = k[Cat. ] [H2O2]1/2-[C3H5Cl] and the apparent activation energy with Ea = 63.462 kJ/mol are obtained according to the kinetics study.     

Kinetics and mechanism of oxygen transfer to methyloxo(dithiolato)rhenium(V) complexes

The kinetics and mechanism of the reactions of the dimeric and monomeric methyloxo(dithiolato)rhenium(V) complexes [(o-SC6H4CH2S)Re(O)CH3]2 and [(o-SC6H4CH2S)PyRe(O)CH3] (Py = pyridine) with XO, sulfoxides, and pyridine N-oxides are studied. In these reactions, an oxygen atom from XO is transferred to rhenium, from which it later removed. A reaction scheme is proposed to interpret the kinetic data. This scheme features the formation of a monomeric (sulfoxide)- or (pyridine N-oxide)(dithiolato)methyloxorhenium(V) complex followed by its bimolecular oxidation in a rate-controlling step. Several sulfoxides (methyl, methyl phenyl, and substituted diphenyl) all react at similar rates. Activation parameters are determined for dimethyl sulfoxide and di-4-tolyl sulfoxide from temperature-dependent studies. The reactions with pyridine N-oxides show autocatalysis in which the catalyst is confirmed to be pyridine formed in the reactions.     

Stepwise Oxidation of Thiophene and Its Derivatives by Hydrogen Peroxide Catalyzed by Methyltrioxorhenium(VII)

The oxidation of thiophene derivatives by hydrogen peroxide is catalyzed by methyltrioxorhenium(VII) (CH(3)ReO(3)). This compound reacts with hydrogen peroxide to form 1:1 and 1:2 rhenium peroxides, each of which transfers an oxygen atom to the sulfur atom of thiophene and its derivatives. Complete oxidation to the sulfone occurs readily by way of its sulfoxide intermediate. The rates for each oxidation step of dibenzothiophenes, benzothiophenes, and substituted thiophenes were determined. The rate constants for the oxidation of the thiophenes are 2-4 orders of magnitude smaller than those for the oxidation of aliphatic sulfides, whereas the rate constants are generally the same for the oxidation of the thiophene oxides and aliphatic sulfoxides. The rate constant for conversion of a sulfide to a sulfoxide (thiophene oxide) increases when a more electron-donating substituent is introduced into the molecule, whereas the opposite trend was found for the reaction that converts a sulfoxide to a sulfone (thiophene dioxide). Mechanisms consistent with this are proposed. The first trend reflects the attack of the nucleophilic sulfur atom of a thiophene center on a peroxide that has been electrophilically activated by coordination to rhenium. The second, more subtle, trend arises when both sulfoxide and peroxide are coordinated to rhenium; the inherently greater nucleophilicity of peroxide then takes control.     

Mechanism of reaction of hydrogen peroxide with horseradish peroxidase: identification of intermediates in the catalytic cycle.

The mechanism of the reaction of horseradish peroxidase isoenzyme C (HRPC) with hydrogen peroxide to form the reactive enzyme intermediate compound I has been studied using electronic absorbance, rapid-scan stopped-flow, and electron paramagnetic resonance (EPR) spectroscopies at both acid and basic pH. The roles of the active site residues His42 and Arg38 in controlling heterolytic cleavage of the H(2)O(2) oxygen-oxygen bond have been probed with site-directed mutant enzymes His42 --> Leu (H42L), Arg38 --> Leu (R38L), and Arg38 --> Gly (R38G). The biphasic reaction kinetics of H42L with H(2)O(2) suggested the presence of an intermediate species and, at acid pH, a reversible second step, probably due to a neutral enzyme-H(2)O(2) complex and the ferric-peroxoanion-containing compound 0. EPR also indicated the formation of a protein radical situated more than approximately 10 A from the heme iron. The stoichiometry of the reaction of the H42L/H(2)O(2) reaction product and 2,2'-azinobis(3-ethylbenzothiazolinesulfonic acid) (ABTS) was concentration dependent and fell from a value of 2 to 1 above 0.7 mM ABTS. These data can be explained if H(2)O(2) undergoes homolytic cleavage in H42L. The apparent rate of compound I formation by H42L, while low, was pH independent in contrast to wild-type HRPC where the rate falls at acid pH, indicating the involvement of an ionizable group with pK(a) approximately 4. In R38L and R38G, the apparent pK(a) was shifted to approximately 8 but there is no evidence that homolytic cleavage of H(2)O(2) occurs. These data suggest that His42 acts initially as a proton acceptor (base catalyst) and then as a donor (acid catalyst) at neutral pH and predict the observed slower rate and lower efficiency of heterolytic cleavage observed at acid pH. Arg38 is influential in lowering the pK(a) of His42 and additionally in aligning H(2)O(2) in the active site, but it does not play a direct role in proton transfer.     

Kinetics and mechanisms of reactions of methyldioxorhenium(V) in aqueous solutions: dimer formation and oxygen-atom abstraction reactions

The stable compound CH3ReO3 (MTO), upon treatment with aqueous hypophosphorous acid, forms a colorless metastable species designated MDO, CH3ReO2(H2O)n (n = 2). After standing, MDO is first converted to a yellow dimer (lambda max = 348 nm; epsilon = 1.3 x 10(4) L mol-1 cm-1). That reaction follows second-order kinetics with k = 1.4 L mol-1 s-1 in 0.1 M aq trifluoromethane sulfonic acid at 298 K. Kinetics studies as functions of temperature gave delta S++ = -4 +/- 15 J K-1 mol-1 and delta H++ = 71.0 +/- 4.6 kJ mol-1. A much more negative value of delta S++ would be expected for simple dimerization, suggesting the release of one or more molecules of water in forming the transition state. If solutions of the dimer are left for a longer period, an intense blue color results, followed by precipitation of a compound that does, even after a long time, retain the Re-CH3 bond in that aq. hydrogen peroxide generates the independently known CH3Re(O)(O2)2(H2O). The blue compound may be analogous to the intensely colored purple cation [(Cp*Re)3(mu 2-O)3(mu 3-O)3ReO3]+. If a pyridine N-oxide is added to the solution of the dimer, it is rapidly but not instantaneously lost at the same time that a catalytic cycle, separately monitored by NMR, converts the bulk of the PyO to Py according to this stoichiometric equation in which MDO is the active intermediate: C5H5NO + H3PO2-->C5H5N + H3PO3. A thorough kinetic study and the analysis by mathematical and numerical simulations show that the key step is the conversion of the dimer D into a related species D* (presumably one of the two mu-oxo bonds has been broken); the rate constant is 5.6 x 10(-3) s-1. D* then reacts with PyO just as rapidly as MDO does. This scheme is able to account for the kinetics and other results.     

Rapid three-step cleavage of RNA and DNA model systems promoted by a dinuclear Cu(II) complex in methanol. energetic origins of the catalytic efficacy

A dinuclear Cu(II) complex of 1,3-bis-N(1)-(1,5,9-triazacyclododecyl)propane with an associated methoxide (2-Cu(II)(2):(-OCH(3))) was prepared, and its kinetics of reaction with an RNA model (2-hydroxypropyl-p-nitrophenyl phosphate (1, HPNPP)) and two DNA models (methyl p-nitrophenyl phosphate (3) and iso-butyl p-chlorophenyl phosphate (4)) were studied in methanol solution at (s)(s)pH 7.2 +/- 0.2. X-ray diffraction structures of 2-Cu(II)(2):(-OH)(H(2)O)(CF(3)SO(3)-)(3):0.5CH(3)CH(2)OCH(2)CH(3) and 2-Cu(II)(2):(-OH)((C(6)H(5)CH(2)O)(2)PO(2)-)(CF(3)SO(3)-)2 show the mode of coordination of the bridging -OH and H(2)O between the two Cu(II) ions in the first complex and bridging -OH and phosphate groups in the second. The kinetic studies with 1 and 3 reveal some common preliminary steps prior to the chemical one of the catalyzed formation of p-nitrophenol. With 3, and also with the far less reactive substrate (4), two relatively fast events are cleanly observed via stopped-flow kinetics. The first of these is interpreted as a binding step which is linearly dependent on [catalyst] while the second is a unimolecular step independent of [catalyst] proposed to be a rearrangement that forms a doubly Cu(II)-coordinated phosphate. The catalysis of the cleavage of 1 and 3 is very strong, the first-order rate constants for formation of p-nitrophenol from the complex being approximately 0.7 s(-1) and 2.4 x 10(-3) s(-1), respectively. With substrate 3, 2-Cu(II)(2):(-OCH(3)) exhibits Michaelis-Mentin kinetics with a k(cat)/K(M) value of 30 M(-1) s(-1) which is 3.8 x 10(7)-fold greater than the methoxide promoted reaction of 3 (7.9 x 10(-7) M(-1) s(-1)). A free energy calculation indicates that the binding of 2-Cu(II)(2):(-OCH(3)) to the transition states for 1 and 3 cleavage stabilizes them by -21 and -24 kcal/mol, respectively, relative to that of the methoxide promoted reactions. The results are compared with a literature example where the cleavage of 1 in water is promoted by a dinuclear Zn(II) catalyst, and the energetic origins of the exalted catalysis of the 2-Cu(II)(2) and 2-Zn(II)(2) methanol systems are discussed.     

Electrocatalytic oxygen reduction by iron tetra-arylporphyrins bearing pendant proton relays

Iron(III) meso-tetra(2-carboxyphenyl)porphine chloride (1) was investigated as a soluble electrocatalyst for the oxygen reduction reaction (ORR) in acetonitrile with [H(DMF)(+)]OTf(-). Rotating ring-disk voltammetry, spectroelectrochemistry, and independent reactions with hydrogen peroxide indicate that 1 has very high selectivity for reduction of O(2) to H(2)O, without forming significant amounts of H(2)O(2). Cyclic voltammetric measurements at high substrate/catalyst ratios (high oxygen pressure) allowed the estimation of a turnover frequency (TOF) of 200 s(-1) at -0.4 V vs Cp(2)Fe(+/0). This is, to our knowledge, the first reported TOF for a soluble ORR electrocatalyst under kinetically controlled conditions. The 4-carboxyphenyl isomer of 1, in which the carboxylic acids point away from the iron center, is a much less selective catalyst. This comparison shows that carboxylate groups positioned to act as proton delivery relays can substantially enhance the selectivity of ORR catalysis.     

Sulfide and sulfoxide oxidations by mono- and diperoxo complexes of molybdenum. A density functional study

The molecular mechanism for the oxidation of sulfides to sulfoxides and subsequent oxidation to sulfones by diperoxo, MoO(O(2))(2)(OPH(3)) (I), and monoperoxo, MoO(2)(O(2))(OPH(3)) (II), complexes of molybdenum was studied using density functional calculations at the b3lyp level and the transition state theory. Complexes I and II were both found to be active species. Sulfide oxidation by I or II shows similar activation free energy values of 18.5 and 20.9 kcal/mol, respectively, whereas sulfoxides are oxidized by I (deltaG = 20.6 kcal/mol) rather than by II (deltaG = 30.3 kcal/mol). Calculated kinetic and thermodynamic parameters account for the spontaneous overoxidation of sulfides to sulfones as has been experimentally observed. The charge decomposition analysis (CDA) of the calculated transition structures of sulfide and sulfoxide oxidations revealed that I and II are stronger electrophilic oxidants toward sulfides than they are toward sulfoxides.