Understanding the origin of metal-sulfur vibrations in an oxo-molybdenum dithiolene complex: relevance to sulfite oxidase

X-ray crystallography and resonance Raman (rR) spectroscopy have been used to further characterize (Tp*)MoO(qdt) (Tp* is hydrotris(3,5-dimethyl-1-pyrazolyl)borate and qdt is 2,3-quinoxalinedithiolene), which represents an important benchmark oxomolybdenum mono-dithiolene model system relevant to various pyranopterin Mo enzyme active sites, including sulfite oxidase. The compound (Tp*)MoO(qdt) crystallizes in the triclinic space group, P1, where a = 9.8424 (7) A, b = 11.2323 (8) A, c = 11.9408 (8) A, alpha = 92.7560 (10) degrees, beta = 98.9530 (10) degrees, and gamma = 104.1680 (10) degrees. The (Tp*)MoO(qdt) molecule exhibits the distorted six-coordinate geometry characteristic of related oxo-Mo(V) systems possessing a single coordinated dithiolene ligand. The first coordination sphere bond lengths and angles in (Tp*)MoO(qdt) are very similar to the corresponding structural parameters for (Tp*)MoO(bdt) (bdt is 1,2-benzenedithiolene). The relatively small inner-sphere structural variations observed between (Tp*)MoO(qdt) and (Tp*)MoO(bdt) strongly suggest that geometric effects are not a major contributor to the significant electronic structural differences reported for these two oxo-Mo(V) dithiolenes. Therefore, the large differences observed in the reduction potential and first ionization energy between the two molecules appear to derive primarily from differences in the effective nuclear charges of their respective sulfur donors. However, a subtle perturbation to Mo-S bonding is implied by the nonplanarity of the dithiolene chelate ring, which is defined by the fold angle. This angular distortion (theta = 29.5 degrees in (Tp*)MoO(qdt); 21.3 degrees in (Tp*)MoO(bdt)) observed between the MoS2 and S-C=C-S planes may contribute to the electronic structure of these oxo-Mo dithiolene systems by controlling the extent of S p-Mo d orbital overlap. In enzymes, the fold angle may be dynamically modulated by the pyranopterin, thereby functioning as a transducer of vibrational energy associated with protein conformational changes directly to the active site via changes in the fold angle. This process could effectively mediate charge redistribution at the active site during the course of atom- and electron-transfer processes. The rR spectrum shows bands at 348 and 407 cm(-1). From frequency analysis of the normal modes of the model, [(NH3)3MoO(qdt)]1+, using the Gaussian03 suite of programs, these bands are assigned as mixed-mode Mo-S vibrations of the five-membered Mo-ditholene core structure. Raman spectroscopy has also provided additional evidence for an in-plane pseudo-sigma dithiolene S-Mo d(xy) covalent bonding interaction in (Tp*)MoO(qdt) and related oxo-Mo-dithiolenes that has implications for electron-transfer regeneration of the active site in sulfite oxidase involving the pyranopterin dithiolene.     

Probing the electronic structure of [MoOS(4)](-) centers using anionic photoelectron spectroscopy

Using photodetachment photoelectron spectroscopy (PES) in the gas phase, we investigated the electronic structure and chemical bonding of six anionic [Mo(V)O](3+) complexes, [MoOX(4)](-) (where X = Cl (1), SPh (2), and SPh-p-Cl (3)), [MoO(edt)(2)](-) (4), [MoO(bdt)(2)](-) (5), and [MoO(bdtCl(2))(2)](-) (6) (where edt = ethane-1,2-dithiolate, bdt = benzene-1,2-dithiolate, and bdtCl(2) = 3,6-dichlorobenzene-1,2-dithiolate). The gas-phase PES data revealed a wealth of new electronic structure information about the [Mo(V)O](3+) complexes. The energy separations between the highest occupied molecular orbital (HOMO) and HOMO-1 were observed to be dependent on the O-Mo-S-C(alpha) dihedral angles and ligand types, being relatively large for the monodentate ligands, 1.32 eV for Cl and 0.78 eV for SPh and SPhCl, compared to those of the bidentate dithiolate complexes, 0.47 eV for edt and 0.44 eV for bdt and bdtCl(2). The threshold PES feature in all six species is shown to have the same origin and is due to detaching the single unpaired electron in the HOMO, mainly of Mo 4d character. This result is consistent with previous theoretical calculations and is verified by comparison with the PES spectra of two d(0) complexes, [VO(bdt)(2)](-) and [VO(bdtCl(2))(2)](-). The observed PES features are interpreted on the basis of theoretical calculations and previous spectroscopic studies in the condensed phase.     

Electronic spectral studies of molybdenyl complexes. 2. MCD spectroscopy of [MoOS4]- centers

Magnetic circular dichroism (MCD) and absorption spectroscopies have been used to probe the electronic structure of [PPh4][MoO(p-SC6H4X)4] (X = H, Cl, OMe) and [PPh4][MoO(edt)2] complexes (edt = ethane-1,2-dithiolate). The results of density functional calculations (DFT) on [MoO(SMe)4]- and [MoO(edt)2]- model complexes were used to provide a framework for the interpretation of the spectra. Our analysis shows that the lowest energy transitions in [MoVOS4] chromophores (S4 = sulfur donor ligand) result from S-->Mo charge transfer transitions from S valence orbitals that lie close to the ligand field manifold. The energies of these transitions are strongly dependent on the orientation of the S lone-pair orbitals with respect to the Mo atom that is determined by the geometry of the ligand backbone. Thus, the lowest energy transition in the MCD spectrum of [PPh4][MoO(p-SC6H4X)4] (X = H) occurs at 14,800 cm-1, while that in [PPh4][MoO(edt)2] occurs at 11,900 cm-1. The identification of three bands in the absorption spectrum of [PPh4][MoO(edt)2] arising from LMCT from S pseudo-sigma combinations to the singly occupied Mo 4d orbital in the xy plane suggests that there is considerable covalency in the ground-state electronic structures of [MoOS4] complexes. DFT calculations on [MoO(SMe)4]- reveal that the singly occupied HOMO is 53% Mo 4dxy and 35% S p for the equilibrium C4 geometry. For [MoO(edt)2]- the steric constraints imposed by the edt ligands result in the S pi orbitals being of similar energy to the Mo 4d manifold. Significant S pseudo-sigma and pi donation may also weaken the Mo identical to O bond in [MoOS4] centers, a requirement for facile active site regeneration in the catalytic cycle of the DMSO reductases. The strong dependence of the energies of the bands in the absorption and MCD spectra of [PPh4][MoO(p-SC6H4X)4] (X = H, Cl, OMe) and [PPh4][MoO(edt)2] on the ligand geometry suggests that the structural features of the active sites of the DMSO reductases may result in an electronic structure that is optimized for facile oxygen atom transfer.     

Paramagnetic oxotungsten(V) complexes containing the hydrotris(3,5-dimethylpyrazol-1-yl)borate ligand

Sky-blue Tp*WOCl(2) has been synthesized from the high-yielding reaction of Tp*WO(2)Cl with boron trichloride in refluxing toluene. Dark-red Tp*WOI(2) was prepared via thermal decarbonylation followed by aerial oxidation of Tp*WI(CO)(3) in acetonitrile. From these precursors, an extensive series of mononuclear tungstenyl complexes, Tp*WOXY [X = Cl(-), Y = OPh(-), SPh(-); X = Y = OPh(-), 2-(n-propyl)phenolate (PP(-)), SPh(-), SePh(-); XY = toluene-3,4-dithiolate (tdt(2-)), quinoxaline-2,3-dithiolate (qdt(2-)), benzene-1,2-diselenolate (bds(2-)); Tp* = hydrotris(3,5-dimethylpyrazol-1-yl)borate], was prepared by metathesis with the respective alkali-metal salt of X(-)/XY(2-) or (NHEt(3))(2)(qdt). The complexes were characterized by microanalysis, mass spectrometry, electrochemistry, IR, electron paramagnetic resonance (EPR), and electronic absorption spectroscopies, and X-ray crystallography (for X = Y = OPh(-), PP(-), SPh(-); XY = bds(2-)). The six-coordinate, distorted-octahedral tungsten centers are coordinated by terminal oxo [W≡O = 1.689(6)-1.704(3) ?], tridentate Tp*, and monodentate or bidentate O/S/Se-donor ligands. Spin Hamiltonian parameters derived from the simulation of fluid-solution X-band EPR spectra revealed that the soft-donor S/Se ligand complexes had larger g values and smaller (183)W hyperfine coupling constants than the less covalent hard-donor O/Cl species. The former showed low-energy ligand-to-metal charge-transfer bands in the near-IR region of their electronic absorption spectra. These oxotungsten(V) complexes display lower reduction potentials than their molybdenum counterparts, underscoring the preference of tungsten for higher oxidation states. Furthermore, the protonation of the pyrazine nitrogen atoms of the qdt(2-) ligand has been examined by spectroelectrochemistry; the product of the one-electron reduction of [Tp*WO(qdtH)](+) revealed usually intense low-energy bands.     

Electronic structure studies of oxomolybdenum tetrathiolate complexes: origin of reduction potential differences and relationship to cysteine-molybdenum bonding in sulfite oxidase

Electronic absorption, magnetic circular dichroism, and resonance Raman spectroscopies have been used to determine the nature of oxomolybdenum-thiolate bonding in (PPh4)[MoO(SPh)4] (SPh = phenylthiolate) and (HNEt3)[MoO(SPh-PhS)2] (SPh-PhS = biphenyl-2,2'-dithiolate). These compounds, like all oxomolybdenum tetraarylthiolate complexes previously reported, display an intense low-energy charge-transfer feature that we have now shown to be comprised of multiple S-->Mo dxy transitions. The integrated intensity of this low-energy band in [MoO(SPh)4]- is approximately twice that of [MoO(SPh-PhS)2]-, implying a greater covalent reduction of the effective nuclear charge localized on the molybdenum ion of the former and a concomitant negative shift in the Mo(V)/Mo(IV) reduction potential brought about by the differential S-->Mo dxy charge donation. However, this is not observed experimentally; the Mo(V)/Mo(IV) reduction potential of [MoO(SPh)4]- is approximately 120 mV more positive than that of [MoO(SPh-PhS)2]- (-783 vs -900 mV). Additional electronic factors as well as structural reorganizational factors appear to play a role in these reduction potential differences. Density functional theory calculations indicate that the electronic contribution results from a greater sigma-mediated charge donation to unfilled higher energy molybdenum acceptor orbitals, and this is reflected in the increased energies of the [MoO(SPh-PhS)2]- ligand-to-metal charge-transfer transitions relative to those of [MoO(SPh)4]-. The degree of S-Mo dxy covalency is a function of the O identical to Mo-S-C dihedral angle, with increasing charge donation to Mo dxy and increasing charge-transfer intensity occurring as the dihedral angle decreases from 90 to 0 degree. These results have implications regarding the role of the coordinated cysteine residue in sulfite oxidase. Although the O identical to Mo-S-C dihedral angles are either approximately 59 or approximately 121 degrees in these oxomolybdenum tetraarylthiolate complexes, the crystal structure of the enzyme reveals an O identical to Mo-SCys-C angle of approximately 90 degrees. Thus, a significant reduction in SCys-Mo dxy covalency is anticipated in sulfite oxidase. This is postulated to preclude the direct involvement of coordinated cysteine in coupling the active site into efficient superexchange pathways for electron transfer, provided the O identical to Mo-SCys-C angle is not dynamic during the course of catalysis. Therefore, we propose that a primary role for coordinated cysteine in sulfite oxidase is to statically poise the reduced molybdenum center at more negative reduction potentials in order to thermodynamically facilitate electron transfer from Mo(IV) to the endogenous b-type heme.     

A density functional study of oxygen atom transfer reactions between biological oxygen atom donors and molybdenum(IV) bis(dithiolene) complexes

Density functional calculations have been used to investigate oxygen atom transfer reactions from the biological oxygen atom donors trimethylamine N-oxide (Me(3)NO) and dimethyl sulfoxide (DMSO) to the molybdenum(IV) complexes [MoO(mnt)(2)](2-) and [Mo(OCH(3))(mnt)(2)](-) (mnt = maleonitrile-1,2-dithiolate), which may serve as models for mononuclear molybdenum enzymes of the DMSO reductase family. The reaction between [MoO(mnt)(2)](2-) and trimethylamine N-oxide was found to have an activation energy of 72 kJ/mol and proceed via a transition state (TS) with distorted octahedral geometry, where the Me(3)NO is bound through the oxygen to the molybdenum atom and the N-O bond is considerably weakened. The computational modeling of the reactions between dimethyl sulfoxide (DMSO) and [MoO(mnt)(2)](2-) or [Mo(OCH(3))(mnt)(2)](-) indicated that the former is energetically unfavorable while the latter was found to be favorable. The addition of a methyl group to [MoO(mnt)(2)](2-) to form the corresponding des-oxo complex not only lowers the relative energy of the products but also lowers the activation energy. In addition, the reaction with [Mo(OCH(3))(mnt)(2)](-) proceeds via a TS with trigonal prismatic geometry instead of the distorted octahedral TS geometry modeled for the reaction between [MoO(mnt)(2)](2-) and Me(3)NO.     

Dye sensitization of nanocrystalline titanium dioxide with square planar platinum(II) diimine dithiolate complexes

A series of platinum-based sensitizers of the general type Pt(NN)(SS), where NN is 4,4'-dicarboxy-2,2'-bipyridine (dcbpy) or 4,7-dicarboxy-1,10-phenanthroline (dcphen) and SS is ethyl-2-cyano-3,3-dimercaptoacrylate (ecda), quinoxaline-2,3-dithiolate (qdt), 1,2-benzenedithiolate (bdt), or 3,4-toluenedithiolate (tdt), that have various ground-state oxidation potentials has been synthesized and anchored to nanocrystalline titanium dioxide electrodes for light-to-electricity conversion in regenerative photoelectrochemical cells with an I(-)/I(-)(3) acetonitrile electrolyte. The intense mixed-Pt/dithiolate-to-diimine charge-transfer absorption bands in this series could be tuned from 440 to 580 nm by choosing appropriate dithiolate ligands, and the highest occupied molecular orbitals varied by more than 500 mV. Spectrophotometric titration of the Pt(dcphen)(bdt) complex exhibits a ground-state pK(a) value of 3.2 +/- 0.1, which can be assigned to the protonation of the carboxylate group of the dcphen ligand. Binding of Pt(dcbpy)(qdt) to porous nanostructured TiO(2) films was analyzed using the Langmuir adsorption isotherm model, yielding an adsorption equilibrium constant of 4 x 10(5) M(-1). The amount of dye adsorbed at the surface of TiO(2) films was 9.5 x 10(-8) mol/cm(2), which is ca. 50% lower than the full monolayer coverage. The resulting complexes efficiently sensitized TiO(2) over a notably broad spectral range and showed an open-circuit potential of ca. 600 mV with an impressive fill factor of > 0.70, making them attractive candidates for solar energy conversion applications. The visible spectra of the 3,4-toluenedithiol-based sensitizers showed an enhanced red response, but the lower photocurrent efficiency observed for these sensitizers stems in part from a sluggish halide oxidation rate and a fast recombination of injected electrons with the oxidized dye.     

Nature of the oxomolybdenum-thiolate pi-bond: implications for Mo-S bonding in sulfite oxidase and xanthine oxidase

The electronic structure of cis,trans-(L-N(2)S(2))MoO(X) (where L-N(2)S(2) = N,N'-dimethyl-N,N'-bis(2-mercaptophenyl)ethylenediamine and X = Cl, SCH(2)C(6)H(5), SC(6)H(4)-OCH(3), or SC(6)H(4)CF(3)) has been probed by electronic absorption, magnetic circular dichroism, and resonance Raman spectroscopies to determine the nature of oxomolybdenum-thiolate bonding in complexes possessing three equatorial sulfur ligands. One of the phenyl mercaptide sulfur donors of the tetradentate L-N(2)S(2) chelating ligand, denoted S(180), coordinates to molybdenum in the equatorial plane such that the OMo-S(180)-C(phenyl) dihedral angle is approximately 180 degrees, resulting in a highly covalent pi-bonding interaction between an S(180) p orbital and the molybdenum d(xy) orbital. This highly covalent bonding scheme is the origin of an intense low-energy S --> Mo d(xy) bonding-to-antibonding LMCT transition (E(max) approximately 16000 cm(-)(1), epsilon approximately 4000 M(-)(1) cm(-)(1)). Spectroscopically calibrated bonding calculations performed at the DFT level of theory reveal that S(180) contributes approximately 22% to the HOMO, which is predominantly a pi antibonding molecular orbital between Mo d(xy) and the S(180) p orbital oriented in the same plane. The second sulfur donor of the L-N(2)S(2) ligand is essentially nonbonding with Mo d(xy) due to an OMo-S-C(phenyl) dihedral angle of approximately 90 degrees. Because the formal Mo d(xy) orbital is the electroactive or redox orbital, these Mo d(xy)-S 3p interactions are important with respect to defining key covalency contributions to the reduction potential in monooxomolybdenum thiolates, including the one- and two-electron reduced forms of sulfite oxidase. Interestingly, the highly covalent Mo-S(180) pi bonding interaction observed in these complexes is analogous to the well-known Cu-S(Cys) pi bond in type 1 blue copper proteins, which display electronic absorption and resonance Raman spectra that are remarkably similar to these monooxomolybdenum thiolate complexes. Finally, the presence of a covalent Mo-S pi interaction oriented orthogonal to the MOO bond is discussed with respect to electron-transfer regeneration in sulfite oxidase and Mo=S(sulfido) bonding in xanthine oxidase.     

Dioxo-molybdenum(VI) and mono-oxo-molybdenum(IV) complexes supported by new aliphatic dithiolene ligands: new models with weakened Mo=O bond characters for the arsenite oxidase active site

The cis-dioxo-molybdenum(VI) complexes, [MoO2(L(H))2]2- (1b), [MoO2(L(S))(2)]2- (2b), and [MoO2(L(O))2]2- (3b) (L(H) = cyclohexene-1,2-dithiolate, L(S) = 2,3-dihydro-2H-thiopyran-4,5-dithiolate, and L(O) = 2,3-dihydro-2H-pyran-4,5-dithiolate), with new aliphatic dithiolene ligands were prepared and investigated by infrared (IR) and UV-vis spectroscopic and electrochemical methods. The mono-oxo-molybdenum(IV) complexes, [MoO(L(H))2]2- (1a), [MoO(L(S))2]2- (2a), and [MoO(L(O))2]2- (3a), were further characterized by X-ray crystal structural determinations. The IR and resonance Raman spectroscopic studies suggested that these cis-dioxo molybdenum(VI) complexes (1b-3b) had weaker Mo=O bonds than the common Mo(VI)O2 complexes. Complexes 1b-3b also exhibited strong absorption bands in the visible regions assigned as charge-transfer bands from the dithiolene ligands to the cis-MoO2 cores. Because the oxygen atoms of the cis-Mo(VI)O2 cores are relatively nucleophilic, these complexes were unstable in protic solvents and protonation might occur to produce Mo(VI)O(OH), as observed with the oxidized state of arsenite oxidase.     

Trinuclear Mo3S7 clusters coordinated to dithiolate or diselenolate ligands and their use in the preparation of magnetic single component molecular conductors

A general route for the preparation of a series of dianionic Mo3S7 cluster complexes bearing dithiolate or diselenolate ligands, namely, [Mo3S7L3](2-) (where L = tfd (bis(trifluoromethyl)-1,2-dithiolate) (4(2-)), bdt (1,2-benzenedithiolate) (5(2-)), dmid (1,3-dithia-2-one-4,5-dithiolate) (6(2-)), and dsit (1,3-dithia-2-thione-4,5-diselenolate) (7(2-))) is reported by direct reaction of [Mo3S7Br6](2-) and (n-Bu)2Sn(dithiolate). The redox properties, molecular structure, and electronic structure (BP86/VTZP) of the 4(2-) to 7(2-) clusters have also been investigated. The HOMO orbital in all complexes is delocalized over the ligand and the Mo3S7 cluster core. Ligand contributions to the HOMO range from 61.67% for 4(2-) to 82.07% for 7(2-), which would allow fine-tuning of the electronic and magnetic properties. These dianionic clusters present small energy gaps between the HOMO and HOMO-1 orbitals (0.277-0.104 eV). Complexes 6(2-) and 7(2-) are oxidized to the neutral state to afford microcrystalline or amorphous fine powders that exhibit semiconducting behavior and present antiferromagnetic exchange interactions. These compounds are new examples of the still rare single-component conductors based on cluster magnetic units.     

Monodithiolene molybdenum(V, VI) complexes: a structural analogue of the oxidized active site of the sulfite oxidase enzyme family

The active sites of the xanthine oxidase and sulfite oxidase enzyme families contain one pterin-dithiolene cofactor ligand bound to a molybdenum atom. Consequently, monodithiolene molybdenum complexes have been sought by exploratory synthesis for structural and reactivity studies. Reaction of [MoO(S(2)C(2)Me(2))(2)](1-) or [MoO(bdt)(2)](1-) with PhSeCl results in removal of one dithiolate ligand and formation of [MoOCl(2)(S(2)C(2)Me(2))](1-) (1) or [MoOCl(2)(bdt)](1-) (2), which undergoes ligand substitution reactions to form other monodithiolene complexes [MoO(2-AdS)(2)(S(2)C(2)Me(2))](1-) (3), [MoO(SR)(2)(bdt)](1-) (R = 2-Ad (4), 2,4,6-Pr(i)(3)C(6)H(2) (5)), and [MoOCl(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (6) (Ad = 2-adamantyl, bdt = benzene-1,2-dithiolate). These complexes have square pyramidal structures with apical oxo ligands, exhibit rhombic EPR spectra, and 3-5 are electrochemically reducible to Mo(IV)O species. Complexes 1-6 constitute the first examples of five-coordinate monodithiolene Mo(V)O complexes; 6 approaches the proposed structure of the high-pH form of sulfite oxidase. Treatment of [MoO(2)(OSiPh(3))(2)] with Li(2)(bdt) in THF affords [MoO(2)(OSiPh(3))(bdt)](1-) (8). Reaction of 8 with 2,4,6-Pr(i)(3)C(6)H(2)SH in acetonitrile gives [MoO(2)(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (9, 55%). Complexes 8 and 9 are square pyramidal with apical and basal oxo ligands. With one dithiolene and one thiolate ligand of a square pyramidal Mo(VI)O(2)S(3) coordination unit, 9 closely resembles the oxidized sites in sulfite oxidase and assimilatory nitrate reductase as deduced from crystallography (sulfite oxidase) and Mo EXAFS. The complex is the first structural analogue of the active sites in fully oxidized members of the sulfite oxidase family. This work provides a starting point for the development of both structural and reactivity analogues of members of this family.     

MULTIPLE CENTER d-β ORBITALS AND CHARGE TRANSFER OF HETERONUCLEAR COUSTERS WITH CUBANE TYPE (Mo_3S_4)_xM~n+ (x=1, 2, M = Cu, W, Ni, Sb. Mo, Sn, Cu_2; n = 4,8)

<正> In this work, with the analysis on MO and electronic structure for a series of heteronuclear cluster with cubane type (Mo4S1 )xMn1(x=1.2. M = Cu, W, Ni, Sb, Mo, Sn, Cu2) we found that it is with the multiple center d-pir orbitals that the ligand Mo3S44+ bonds to the M atom to form these class clusters. It is revealed that the charges transfer from the M atom to Mo atom of the ligand Mo3S44+ and its relationship with the MC (multiple center) d-pπ orbitals. Based on the charge transfer the electronic spectrum and the magnetic property of some cubane clusters have been discussed.     

Synthesis, characterization, and crystal structure of the Pd(phen)(bdt) complex. A DFT and TDDFT study of its ground electronic and excited states compared to those of analogous complexes

The synthesis and characterization of Pd(phen)(bdt) (1) (phen = 1,10-phenanthroline, bdt = 1,2-benzenedithiolate) is presented. 1 crystallizes in the monoclinic space group P2(1)/c, alpha = 11.281(4) A, b = 20.498(8) A, c = 8.374(3) A, beta = 90.234(8), V = 1936.5(13) A(3), Z = 4, and is isostructural with its previously reported related complexes. The ground and low lying excited electronic states in 1 and in the related complexes Pd(bpy)(bdt) (2), Pt(bpy)(bdt) (3), Pt(bpy)(mnt) (4), and Pt(bpy)(edt) (5) [where bpy = 2,2'-bipyridine, edt = ethylene-1,2-dithiolate, and mnt = maleonitriledithiolate] are studied using density functional theory techniques. The electronic properties of 1-5 are studied using the B3LYP functional. Optimized geometries are compared to experimentally observed structures. Time dependent density functional theory (TDDFT) is employed to investigate the excited singlet and triplet states. The calculated energies of the lowest singlet state and the lowest triplet state in all five complexes are in considerable agreement with experimental data. It is shown that variation of both metal and dithiolate-ligand going from 1 and 2 to 3, 4, and 5 has a substantial impact on the spectroscopic and excited-state properties, indicating at the same time the mixed metal/dithiolate character of the HOMO orbital. All the low-lying transitions are categorized as MMLL'CT transitions. The emissive state of all complexes is assigned as a triplet dithiolate/metal to diimine charge transfer with differences in the structures of the emissions resulting from differences in the pi dithiolate orbital of the mnt, bdt, and edt as well as from differences in metal.     

Terpyridine platinum(ii) complexes containing triazine di- or tri-thiolate bridges: structures, luminescence, electrochemistry, and aggregation

Dinuclear complexes [{Pt(trpy)}(2)(L)](PF(6))(2) (trpy = 2,2':6',2'-terpyridine, L = 2-octylthio-1,3,5-triazine-4,6-dithiolate ion (1), L = 2-octadecylthio-1,3,5-triazine-4,6-dithiolate ion (2), L = 2-di-n-butylamino-1,3,5-triazine-4,6-dithiolate ion (3)) and a trinuclear complex [{Pt(trpy)}(3)(L)](PF(6))(3) (L = 1,3,5-triazine-2,4,6-trithiolate ion (4)) have been synthesized and characterized. The single crystal X-ray analysis revealed that the two {Pt(trpy)}(2+) fragments in 1 and 3 adopt a syn-configuration. The PtPt distances are around 4.3 ?, suggesting no intramolecular PtPt interactions. Complexes 1-4 in acetonitrile show broad absorption bands at around 470 nm, assigned to mainly the ligand-to-ligand charge transfer ((1)LLCT) from triazine thiolates to trpy based on the comparison to the related complexes and the density functional theory (DFT) calculations. The red luminescence of 1-4 in acetonitrile is attributable to emission predominantly from (3)LLCT. Cyclic voltammograms of 1-3 exhibit four redox couples from -2.0 V to 0 V vs. Ag/AgCl. The two consecutive processes at around -0.70 V are assigned to the sequential reduction of two trpy ligands. This assignment was further supported by the observation of the anion radical of trpy in spectroelectrochemical experiments. The splitting of the redox potentials of two trpy ligands evidences the moderate electronic coupling interactions mediated by the triazine dithiolate bridges. Complex 2 formed a transparent red gel in CH(3)CN, whereas 4 produced a gel-like solid in the mixtures of CH(3)CN and other solvents. The interactions dominating the aggregative behaviours have been discussed based on the results of electronic absorption and emission spectroscopy.     

Active-site stereochemical control of oxygen atom transfer reactivity in sulfite oxidase

A number of both experimental and computational studies have recently been reported for symmetric, six-coordinate dioxomolybdenum(VI) complexes as models of the fully oxidized form of the molybdopterin enzyme sulfite oxidase (SO). Such studies have suggested that the two terminal oxo donors in SO are electronically equivalent. However, the consensus structure of the catalytically competent Mo(VI) active site in SO is five-coordinate square pyramidal, possessing two terminal oxo donors, an ene-1,2-dithiolate chelate and a cysteine sulfur donor ligand. Computational studies at the density functional level of theory have been performed on a minimal model of the SO active site, [Mo(VI)O2(S2C2Me2)(SCH3)]-, in C1 symmetry to evaluate the composition of the LUMO, which is the putative electron acceptor orbital in the oxygen atom transfer (OAT) reaction with the sulfite substrate. The LUMO in this model is principally composed of a Mo dxy - ppi* interaction between the Mo and the equatorial oxygen (Oeq), while the axial oxygen (Oax) possesses no contribution to this orbital. In fact, the LUMO+1 orbital which possesses a substantial amount of Oax character lies nearly 1 eV higher in energy than the LUMO. It has also been suggested that changes in the Oax-Mo-Sthiolate-C torsion angle during the course of enzyme catalysis may aid in selection of Oeq for OAT. Calculations were performed in which this torsion angle was varied by 20 degrees through 360 degrees . These calculations demonstrate that the Mo dxy -Oeq ppi* interaction, and therefore the Oeq atom character, always dominates the LUMO. The results presented here suggest that oxygen atom selection and activation are a direct function of the low-symmetry structure of the oxidized SO active site and provide a role for the ene-1,2-dithiolate in promoting OAT reactivity through its kinetic trans effect on the equatorial oxo donor.     

Analogues for the molybdenum center of sulfite oxidase: oxomolybdenum(V) complexes with three thiolate sulfur donor atoms

cis,trans-(L-N2S2)Mo(V)O(SR) [L-N2S2H2 = N,N'-dimethyl-N,N'-bis(mercaptophenyl)ethylenediamine; R = CH2Ph, CH2CH3, and p-C6H4-Y (Y = CF3, Cl, Br, F, H, CH3, CH2CH3, and OCH3)] are the first structurally characterized mononuclear Mo compounds with three thiolate donors, as occurs at the Mo active site in sulfite oxidase. X-ray crystal structures of the cis,trans-(L-N2S2)Mo(V)O(SR) compounds, where R = CH2Ph, CH2CH3, p-C6H4-OCH3, and p-C6H4-CF3, show a similar coordination geometry about the Mo atom with all three sulfur thiolate donors in the equatorial plane. This coordination geometry places two adjacent S ppi orbitals parallel to the Mo=O bond, analogous to the orientation in the ene-dithiolate ligand in sulfite oxidase; the third S ppi orbital lies in the equatorial plane. Charge-transfer transitions from the S p to the Mo d orbitals occur at approximately 28,000 cm(-1) (epsilon: 4,400-6,900 L mol(-1)] cm(-1)) and 15,500 cm(-1) (epsilon: 3,200-4,900 L mol(-1) cm(-1)). The EPR parameters are nearly identical for all the cis,trans-(L-N2S2)Mo(V)O(SR) compounds (g1 approximately 2.022, g2 approximately 1.963, g3 approximately 1.956, Al approximately 58.4 x 10(-4) cm(-1), A2 approximately 23.7 x 10(-4) cm(-1), A3 approximately 22.3 x 10(-4) cm(-1)) and are typical of an oxo-Mo(V) center coordinated by multiple thiolate donors. The g and A tensors are related by a 24 degrees rotation about the coincident g2 and A2 tensor elements, reflecting the approximate Cs coordination symmetry. These EPR parameters more closely mimic those of the low pH form of sulfite oxidase and the "very rapid" species of xanthine oxidase than previous model compounds with two or four thiolate donors. The cis,trans-(L-N2S2)Mo(V)O(SR) compounds undergo a quasi-reversible, one-electron reduction and an irreversible oxidation that show a linear dependence upon the Hammett parameter, sigmap, of the Y group. The cis,trans-(L-N2S2)Mo(V)O(SR) compounds provide a well-defined platform for the systematic investigation of the electronic structures of the Mo(V)OS3 centers and their implications for molybdoenzymes.     

Sulfur ligand substitution at the nickel(II) sites of cubane-type and cubanoid NiFe3S4 clusters relevant to the C-clusters of carbon monoxide dehydrogenase

Substitution reactions at the nickel site of the cubane-type cluster [(Ph3P)NiFe3S4(LS3)]2- (2) have been investigated in the course of a synthetic approach to the C-clusters of CODH. Reaction of 2 with RS- or toluene-3,4-dithiolate affords [(RS)NiFe3S4(LS3)]3- (R = Et (5), H (6)) or [(tdt)NiFe3S4(LS3)]3- (7), demonstrating that anionic sulfur ligands can be bound at the NiII site. Clusters 5 and 6 contain tetrahedral Ni(micro3-S)3(SR) sites. Cluster 7 is of particular interest because it includes a cubanoid NiFe3(micro2-S)(micro3-S)3 core and an approximately planar Ni(tdt)(micro3-S)2 unit. The cubanoid structure is found in all C-clusters, and an NiS4-type unit has been reported in C. hydrogenoformans CODH. Clusters 5/6 are formulated to contain the core [NiFe3S4]1+ identical with Ni2+ (S = 1) + [Fe3S4]1- (S = 5/2) and 7 the core [NiFe3S4]2+ identical with Ni2+ (S = 0) + [Fe3S4]0 (S = 2) on the basis of structure, 57Fe isomer shifts, and 1H NMR isotropic shifts. Also reported are [(EtS)CuFe3S4(LS3)]3- (9) and [Fe4S4(LS3)(tdt)]3- (11). The structures of 5-7, 9, and 11 are presented. Cluster 11, with a five-coordinate Fe(tdt)(micro3-S)3 site, provides a clear structural contrast with 7, which is currently the closest approach to a C-cluster but lacks the exo iron atom found in the NiFe4S4,5 cores of the native clusters. (CODH = carbon monoxide dehydrogenase, LS3 = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-), tdt = toluene-3,4-dithiolate).     

A new optical/electrochemical Na+ sensor based on platinum(II) complexes containing crown ether annelated dithiolate ligands

Two new platinum(II) complexes containing both 4,4'-di-tert-butyl-2,2'-bipyridine (dbbpy) and crown ether annelated dithiolate ligands, [Pt(dbbpy)(3O-C2S4)] (, 3O-C2S4(2-)=1,4,7-trioxa-10,13-dithiacyclopentadec-11-ene-11,12-dithiolate) and [Pt(dbbpy)(4O-C2S4)] (, 4O-C2S(4)2-=1,4,7,10-tetraoxa-13,16-dithiacyclooctadec-14-ene-14,15-dithiolate), have been prepared and characterized. These two complexes show intense electronic absorption bands in the UV-vis region due to the intramolecular mixed metal/ligand-to-ligand charge transfer transition, and they display solvatochromic behavior. The redox properties of these compounds have been investigated by cyclic voltammetry and complex shows a significant response for Na+ ions with a large positive shift of ca. 125 mV. Moreover, complex is very sensitive in detecting Na+ cations with an obvious change in color which can be conveniently observed with the naked eye.     

丙烯在MoO3和WO3缺氧表面吸附的原子簇模型的从头算研究

本文选取原子簇模型, 用从头算UHF方法优化几何构型, 并进行二级MΦller-Plesset微扰(MP2)相关能计算, 研究了丙烯在MoO3和WO3表面的吸附态结构。优化得到的吸附前后的几何构型及计算的原子净电荷和吸附能都一致地表明,WO3对丙烯的吸附作用强于MoO3; 丙烯均用π成键电子向中心原子Mo或W配位而被吸附在MoO3的缺氧表面, 使丙烯中的碳-碳双键减弱致使容易断裂, 进而起到促进歧化反应的作用。从MP2计算的WO3对丙烯的吸附能0.934eV大于MoO3对丙烯的吸附能0.506eV及吸附过程均不必翻越能垒, 还可以定性理解用WO3作催化剂时的丙烯歧化反应的最佳温度(675K)高于用MoO3作催化剂(均以Al2O3为载体)的最佳反应温度(480K), 且WO3在675K时的催化活性高于MoO3在480K时的活性。