Polyamine-stabilized sodium aryloxides: simple initiators for the ring-opening polymerization of rac-lactide

Metalation of 2,4,6-tri(methyl)phenol ((Me)ArOH) and 2,6-di(tert-butyl)-4-methylphenol ((Bu)ArOH) with NaN(SiMe(3))(2) in toluene and in the presence of stoichiometric amounts of the polydentate amines N,N,N',N'-tetramethylethylenediamine (TMEDA) and N,N,N',N',N'-pentamethyldiethylenetriamine (PMDETA) affords three new sodium aryloxide complexes [Na(μ-OAr(Bu))(TMEDA)](2) (3), [Na(μ-OAr(Me))(PMDETA)](2) (4), and [Na(OAr(Bu))(PMDETA)] (5). Complexes 3 to 5 have been isolated as crystalline materials in reasonable yields and characterized in the solid state by X-ray crystallography and in solution by NMR spectroscopy. Complexes 3 to 5 and the related [tris(2-dimethylaminoethyl)amine] (Me(6)TREN) derivatives [Na(OAr(Me))(HOAr(Me))(Me(6)TREN)] (1) and [Na(OAr(Bu))(Me(6)TREN)] (2), recently prepared in our group, are shown to be active as initiators for the ring-opening polymerization (ROP) of rac-lactide with benzyl alcohol as a co-initiator. However, during the course of the polymerization reactions intrachain and stereorandom transesterification side-reactions were observed under some of the experimental conditions tested.     

Film growth precursor development for metal nitrides. Synthesis, structure, and volatility of molybdenum(VI) and tungsten(VI) complexes containing bis(imido)metal fragments and various nitrogen donor ligands

The molybdenum and tungsten complexes W2(NtBu)4(pz)4(pzH).(C6H14)0.5 (pz = pyrazolate), M(NtBu)2(Me2pz)2(Me2pzH)2 (Me2pz = 3,5-dimethylpyrazolate), M(NtBu)2(tBu2pz)2 (tBu2pz = 3,5-di-tert-butylpyrazolate), M2(NtBu)4(Me2pz)2Cl2, W(NtBu)2(C2N3(iPr)2)2py2, M(NtBu)2-(CN4CF3)2py2, and W(NtBu)2(PhNNNPh)2 were prepared by various synthetic routes from the starting materials Mo(NtBu)2Cl2, W(NtBu)2(NHtBu)2, and W(NtBu)2Cl2py2. These new complexes were characterized by spectral and analytical methods and by X-ray crystal structure determinations. The volatilities and thermal stabilities were evaluated to determine the potential of the new complexes for use in thin film growth of metal nitride films. Mo(NtBu)2(tBu2pz)2 and W(NtBu)2(tBu2pz)2 were found to have the optimum combination of volatility and thermal stability for application in atomic layer deposition thin film growth procedures.     

Synthesis, structure, properties, volatility, and thermal stability of molybdenum(II) and tungsten(II) complexes containing allyl, carbonyl, and pyrazolate or amidinate ligands

Treatment of M(allyl)(Cl)(CO)₂(py)₂ (M = Mo, W) with 1 equiv. of potassium pyrazolates in tetrahydrofuran at −78 °C afforded M(allyl)(R₂pz)(CO)₂(py)_n (R₂pz = 3,5-disubstituted pyrazolate; n = 1, 2) in 68-81% yields. X-ray crystal structure analyses of Mo(allyl)((CF₃)₂pz)(CO)₂(py)₂ and W(allyl)(tBu₂pz)(CO)₂(py) revealed η¹- and η²-coordination of the (CF₃)₂pz and tBu₂pz ligands, respectively. Analogous treatment of Mo(allyl)(Cl)(CO)₂(NCCH₃)₂ with 1 equiv. of tBu₂pzK in tetrahydrofuran at −78 °C afforded [Mo(allyl)(tBu₂pz)(CO)₂]₂ in 79% yield. An X-ray crystal structure analysis of [Mo(allyl)(tBu₂pz)(CO)₂]₂ showed a dimeric structure bridged by two μ-η²:η¹-tBu₂pz ligands. Treatment of M(allyl)(Cl)(CO)₂(py)₂ with 1 equiv. of lithium 1,3-diisopropylacetamidinate or lithium 1,3-di-tert-butylacetamidinate in diethyl ether at −78 °C afforded M(allyl)(iPrNC(Me)NiPr)(CO)₂(py) and M(allyl)(tBuNC(Me)NtBu)(CO)₂(py), respectively, in 68-78% yields. The new complexes were characterized by spectral and analytical methods and by X-ray crystal structure determinations. M(allyl)(iPrNC(Me)NiPr)(CO)₂(py) adopt pseudo-octahedral geometry about the metal centers, with the 1,3-diisopropylacetamidate ligand nitrogen atoms spanning one axial site and one equatorial site of the octahedron. By contrast, M(allyl)(tBuNC(Me)NtBu)(CO)₂(py) adopt pseudo-octahedral structures in which the two 1,3-di-tert-butylacetamidinate ligand nitrogen atoms span two equatorial coordination sites. Sublimation of M(allyl)(tBuNC(Me)NtBu)-(CO)₂(py) at 105 °C/0.03 Torr afforded ?7% yields of M(allyl)(tBuNC(Me)NtBu)(CO)₂, along with sublimed M(allyl)(tBuNC(Me)NtBu)(CO)₂(py). W(allyl)(tBuNC(Me)NtBu)(CO)₂ exists in the solid state as a 16-electron complex with distorted square pyramidal geometry. Many of the new complexes undergo dynamic ligand site exchange in solution, and these processes were probed by variable temperature ¹H NMR spectroscopy. The volatilities and thermal stabilities were evaluated to determine the potential of the new complexes for use as precursors in thin film growth experiments.     

Synthesis and structural characterization of unprecedented bis-asymmetric heteroscorpionate U(III) complexes: [U(kappa3-H2B(pztBu,Me)(pzMe,tBu))2I] and [U(kappa3-H2B(pztBu,Me)(pzMe2))2I

[UI(3)(THF)(4)] reacts at room temperature with 2 equiv of KBp(tBu,Me), in toluene, yielding [U(kappa(3)-H(mu-H)B(pz(tBu,Me))(pz(Me,tBu)))(2)I] (1). This unprecedented complex, stabilized by two asymmetric heteroscorpionate ligands, is formed due to an isomerization process promoted in situ by the metal center. To find a general method for preparing this type of compound, we synthesized the novel asymmetric K[H(2)B(pz(tBu,Me))(pz(Me2))], and by a straightforward salt metathesis with [UI(3)(THF)(4)] the novel bis-asymmetric complex [U(kappa(3)-H(mu-H)B(pz(tBu,Me))(pz(Me2)))(2)I] (2) was isolated and characterized in the solid state and in solution. As indicated by X-ray crystallographic analysis, the U(III) in 1 and 2 is seven-coordinated by two tridentate asymmetric dihydrobis(pyrazoly)borates and by an iodide. In both cases, the coordination geometry around the metal is very distorted, the pentagonal bipyramid being the one which better describes the arrangement of the atoms around the U(III). An approximate C(2) axis can be defined in the solid state, and is maintained in solution as indicated by the (1)H NMR spectrum of 1 and 2. In the course of attempting to crystallize some of the compounds, monocrystals of the dimer [U(kappa(3)-Bp(tBu,Me))(Hpz(tBu,Me))I(mu-I)](2) (3) were isolated. In this compound each U(III) atom is seven-coordinated by one kappa(3)-Bp(tBu,Me), by one terminal and by two bridging iodide ligands, and by a monodentate Hpz(tBu,Me), exhibiting a distorted 4:3 tetragonal base-trigonal geometry.     

Sodium dialkyl-amidozincates: alkyl or amido bases? An experimental and theoretical case study

Alkali metal zincate reagents are attracting considerable attention at present in respect to their often special reactivity/selectivity in hydrogen-metal and halogen-metal interconversion reactions. Heteroleptic diorgano-amidozincates, typified by lithium di-tert-butyltetramethylpiperidinozincate, have proved to be especially useful reagents in such applications. In this paper the related sodium TMP-zincate, prepared as its TMEDA (N,N,N',N'-tetramethylethylenediamine) adduct, [TMEDA.Na(mu-tBu)(mu-TMP)Zn(tBu)], 1, is introduced. This new zincate was synthesized from a 1:1:1 mixture of tBu2Zn, NaTMP, and TMEDA in hexane solution, as a colorless crystalline solid in an isolated yield of 58%. It has been characterized in solution by 1H and 13C NMR spectroscopic studies. An X-ray crystallographic study reveals that 1 adopts a five-membered (NaNZnCC) ring system featuring a TMP bridge and an unusual, asymmetrical tBu bridge involving a Na...Me agostic contact. Probing the basicity of 1, reaction with benzene affords the new hetero(tri)leptic zincate [TMEDA.Na(mu-Ph)(mu-TMP)Zn(tBu)], 2, which has also been crystallographically characterized. Thus, in this hydrogen-metal exchange reaction 1 functions as an alkyl base, with the elimination of butane, as opposed to an amido base. Also reported are DFT calculations using B3LYP functionals and the 6-311G** basis set on model zincate systems, which intimate that the preference of 1 for tBu ligand transfer over TMP ligand transfer in the reaction toward benzene is due to favorable thermodynamic factors.     

氮硅取代的氮杂烯丙基锂、铁(Ⅱ)和钴(Ⅱ)的合成及结构(英文)

本文以[(Me2)NCH2C6H4CHSiMe2(NMe2)]Li(TMEDA)与叔丁腈为原料按1∶1加成得到氮杂烯丙基的锂化合物[{(Me2)NCH2C6H4}CHC(tBu)NSiMe2(NMe2)Li(TMEDA)]即1。然后用乙醚或四氢呋喃作溶剂化合物1和二氯化亚铁或二氯化钴按2∶1反应得到氮杂烯丙基铁或钴的化合物分别为2和3。通式为M[{(Me2)NCH2C6H4}CHC(tBu)NSiMe2(NMe2)]2(M=Fe(2),Co(3))。化合物1,2和3的结构分别用1H NMR,13C NMR,元素分析和X-射线单晶衍射技术进行了表征。晶体结构表明化合物2和3结构类似,都是以金属为对称中心的硅桥联的端基氮配位的氮杂烯丙基化合物。     

Group 6 imido complexes supported by diamido-donor ligands

Reactions of the lithiated diamido-pyridine or diamido-amine ligands Li(2)N(2)N(py) or Li(2)N(2)N(am) with [W(NAr)Cl(4)(THF)] (Ar = Ph or 2,6-C(6)H(3)Me(2); THF = tetrahydrofuran) afforded the corresponding imido-dichloride complexes [W(NAr)(N(2)N(py))Cl(2)] (R = Ph, 1, or 2,6-C(6)H(3)Me(2), 2) or [W(NAr)(N(2)N(am))Cl(2)] (R = Ph, 3, or 2,6-C(6)H(3)Me(2), 4), respectively, where N(2)N(py) = MeC(2-C(5)H(4)N)(CH(2)NSiMe(3))(2) and N(2)N(am) = Me(3)SiN(CH(2)CH(2)NSiMe(3))(2). Subsequent reactions of 1 with MeMgBr or PhMgCl afforded the dimethyl or diphenyl complexes [W(NPh)(N(2)N(py))R(2)] (R = Me, 5, or Ph, 6), respectively, which have both been characterized by single crystal X-ray diffraction. Reactions of Li(2)N(2)N(py) or Li(2)N(2)N(am) with [Mo(NR)(2)Cl(2)(DME)] (R = (t)Bu or Ph; DME = 1,2-dimethoxyethane) afforded the corresponding bis(imido) complexes [Mo(NR)(2)(N(2)N(py))] (R = (t)Bu, 7, or Ph, 8) and [Mo(N(t)Bu)(2)(N(2)N(am))] (9).     

Coupling of an aldehyde or ketone to pyridine mediated by a tungsten imido complex

The reactivity of W(NPh)(o-(Me3SiN)2C6H4)(py)2 and W(NPh)(o-(Me3SiN)2C6H4)(pic)2 (py=pyridine; pic=4-picoline) with unsaturated substrates has been investigated. Treatment of W(NPh)(o-(Me3SiN)2C6H4)(py)2 with diphenylacetylene or 2,3-dimethyl-1,3-butadiene generates W(NPh)(o-(Me3SiN)2C6H4)(eta2-PhCCPh) and W(NPh)(o-(Me3SiN)2C6H4)(eta4-CH2=C(Me)C(Me)=CH2), respectively, while the addition of ethylene to W(NPh)(o-(Me3SiN)2C6H4)(py)2 generates the known metallacycle W(NPh)(o-(Me3SiN)2C6H4)(CH2CH2CH2CH2). The addition of 2 equiv of acetone to W(NPh)(o-(Me3SiN)2C6H4)(pic)2 provides the azaoxymetallacycle W(NPh)(o-(Me3SiN)2C6H4)(OCH(Me)2)(OC(Me)2-o-C5H3N-p-Me), the result of acetone insertion into the ortho C-H bond of picoline. Similarily, the addition of 2 equiv of RC(O)H [R=Ph, tBu] to W(NPh)(o-(Me3SiN)2C6H4)(py)2 generates W(NPh)(o-(Me3SiN)2C6H4)(OCH2R)(OCHR-o-C5H4N) [R=Ph, tBu,]. In contrast, reaction between W(NPh)(o-(Me3SiN)2C6H4)(py)2 and 2-pyridine carboxaldehyde yields the diolate W(NPh)(o-(Me3SiN)2C6H4)(OCH(C5H4N)CH(C5H4N)O). The synthesis of W(NPh)(o-(Me3SiN)2C6H4)(PMe3)(py)(eta2-OC(H)C6H4-p-Me), formed by the addition of p-tolualdehyde to a mixture of W(NPh)(o-(Me3SiN)2C6H4)(py)2 and PMe3, suggests that an eta2-aldehyde intermediate is involved in the formation of the azaoxymetallacycle, while the isolation of W(NPh)(o-(Me3SiN)2C6H4)(Cl)(OC(Me)(CMe3)-o-C5H4N), formed by the reaction of pinacolone with W(NPh)(o-(Me3SiN)2C6H4)(py)2, in the presence of adventitious CH2Cl2, suggests that the reaction proceeds via the hydride W(NPh)(o-(Me3SiN)2C6H4)(H)(OC(Me)(CMe3)-o-C5H4N).     

Main group multiple C-H/N-H bond activation of a diamine and isolation of a molecular dilithium zincate hydride: experimental and DFT evidence for alkali metal-zinc synergistic effects

The surprising transformation of the saturated diamine (iPr)NHCH(2)CH(2)NH(iPr) to the unsaturated diazaethene [(iPr)NCH═CHN(iPr)](2-) via the synergic mixture nBuM, (tBu)(2)Zn and TMEDA (where M = Li, Na; TMEDA = N,N,N',N'-tetramethylethylenediamine) has been investigated by multinuclear NMR spectroscopic studies and DFT calculations. Several pertinent intermediary and related compounds (TMEDA)Li[(iPr)NCH(2)CH(2)NH(iPr)]Zn(tBu)(2) (3), (TMEDA)Li[(iPr)NCH(2)CH(2)CH(2)N(iPr)]Zn(tBu) (5), {(THF)Li[(iPr)NCH(2)CH(2)N(iPr)]Zn(tBu)}(2) (6), and {(TMEDA)Na[(iPr)NCH(2)CH(2)N(iPr)]Zn(tBu)}(2) (11), characterized by single-crystal X-ray diffraction, are discussed in relation to their role in the formation of (TMEDA)M[(iPr)NCH═CHN(iPr)]Zn(tBu) (M = Li, 1; Na, 10). In addition, the dilithio zincate molecular hydride [(TMEDA)Li](2)[(iPr)NCH(2)CH(2)N(iPr)]Zn(tBu)H 7 has been synthesized from the reaction of (TMEDA)Li[(iPr)NCH(2)CH(2)NH(iPr)]Zn(tBu)(2)3 with nBuLi(TMEDA) and also characterized by both X-ray crystallographic and NMR spectroscopic studies. The retention of the Li-H bond of 7 in solution was confirmed by (7)Li-(1)H HSQC experiments. Also, the (7)Li NMR spectrum of 7 in C(6)D(6) solution allowed for the rare observation of a scalar (1)J(Li-H) coupling constant of 13.3 Hz. Possible mechanisms for the transformation from diamine to diazaethene, a process involving the formal breakage of four bonds, have been determined computationally using density functional theory. The dominant mechanism, starting from (TMEDA)Li[(iPr)NCH(2)CH(2)N(iPr)]Zn(tBu) (4), involves the formation of a hydride intermediate and leads directly to the observed diazaethene product. In addition the existence of 7 in equilibrium with 4 through the dynamic association and dissociation of a (TMEDA)LiH ligand, also provides a secondary mechanism for the formation of the diazaethene. The two reaction pathways (i.e., starting from 4 or 7) are quite distinct and provide excellent examples in which the two distinct metals in the system are able to interact synergically to catalyze this otherwise challenging transformation.     

Coordination chemistry of silanedithiolato ligands derived from cyclotrisilathiane: synthesis and structures of complexes of iron(II), cobalt(II), palladium(II), copper(I), and silver(I)

The coordination chemistry of chelating silanedithiolato ligands has been investigated on Fe(II), Co(II), Pd(II), Cu(I), and Ag(I). Treatment of M(OAc)(2) (M = Fe, Co, Pd) with cyclotrisilathiane (SSiMe(2))(3) in the presence of Lewis bases resulted in formation of Fe(S(2)SiMe(2))(PMDETA) (1), Fe(S(2)SiMe(2))(Me(3)TACN) (2), Co(S(2)SiMe(2))(PMDETA) (3), and Pd(S(2)SiMe(2))(PEt(3))(2) (4) (PMDETA = N,N,N',N',N' '-pentamethyldiethylenetriamine; Me(3)TACN = 1,4,7-trimethyl-1,4,7-triazacyclononane). The analogous reactions of M(OAc) (M = Cu, Ag) in the presence of PEt(3) gave rise to the dinuclear complexes M(2)[(SSiMe(2))(2)S](PEt(3))(3) [M = Cu (5), Ag (6)]. Complexes were characterized in solution by (1)H, (31)P[(1)H], and (29)Si[(1)H] NMR and in the solid state by single-crystal X-ray diffraction. Mononuclear complexes 1-3 have a four-membered MS(2)Si ring, and these five-coordinate complexes adopt trigonal-bipyramidal (for the PMDETA adducts) or square-pyramidal (for the Me(3)TACN adduct) geometries. In dimer 6, the (SSiMe(2))(2)S(2)(-) silanedithiolato ligand bridges two metal centers, one of which is three-coordinate and the other four-coordinate. The chelating effect of silanedithiolato ligands leads to an increase in the stability of silylated thiolato complexes.     

Synthesis of the 2,4,5-tri-tert-butyl-1,3-diphospholide anion by phosphinidene elimination from 2,4,6-tri-tert-butyl-1,3,5-triphosphabenzene on treatment with the amide Li[NPh(SiMe3)

Treatment of the lithium amide Li[NPh(SiMe3)] with 2,4,6-tri-tert-butyl-1,3,5-triphosphabenzene, P(3)C(3)tBu(3), in a 1:2 ratio afforded equimolar amounts of the lithium salt of the five-membered 2,4,5-tri-tert-butyl-1,3-diphospholide anion, LiP(2)C(3)tBu(3) (isolated as its N,N,N',N'-tetramethylethylenediamine (TMEDA) adduct), and the tricyclic compound 6-[phenyl(trimethylsilyl)amino]-3,5,7-tri-tert-butyl-1,2,4,6-tetraphosphatricyclo[3.2.0.0(2,7)]hept-3-ene. Both compounds have been structurally characterised by single-crystal X-ray diffraction studies. The mechanism of this remarkable reaction has been elucidated by theoretical methods at the B3LYP/6-311+G** level of theory. The reaction involves a hitherto unobserved aminophosphinidene, which was formed by abstraction of a phosphorus atom from triphosphabenzene. The intermediate aminophosphinidene, which is further stabilised by the solvent THF, shows, in agreement with previous theoretical predictions, enhanced stability and reacts then with a second molecule of triphosphabenzene.     

Uranium (III) scorpionates: synthesis and structure of [(TpMe2)2U[N(C6H5)2]] and [(TpMe2)2U[N(SiMe3)2]

Reaction of [(Tp(Me)2)(2)UI] with KNR(2) (R = C(6)H(5), SiMe(3)) in tetrahydrofuran (THF) afforded the monomeric trivalent actinide amide complexes [(Tp(Me)2)(2)U[N(C(6)H(5))(2)]], 1, and [(Tp(Me)2)(2)U[N(SiMe(3))(2)]], 2. The complexes have been fully characterized by spectroscopic methods and their structures were confirmed by X-ray crystallographic studies. In the solid state 1 and 2 exhibit distorted pentagonal bipyramidal geometries. The U-NR(2) bond lengths in both complexes are the same but in complex 2 the greater steric demands of the N(SiMe(3))(2) ligand led to elongated U-N(pz) bonds, especially those opposite the amido ligand.     

Low-valent chemistry of cobalt amide. Synthesis and structural characterization of cobalt(II) amido, aryloxide, and thiolate compounds

The binuclear cobalt(II) amide complex [(CoL2)2-(TMEDA)] (1) [L = N(Si(t)BuMe2)(2-C5H3N-6-Me); TMEDA = Me2NCH2CH2NMe2] has been synthesized by the reaction of anhydrous CoCl2 with 2 equiv of [Li(L)(TMEDA)]. X-ray crystallography revealed that complex 1 consists of two [CoL2] units linked by one TMEDA ligand molecule, which binds in an unusual N,N'-bridging mode. Protolysis of 1 with the bulky phenol Ar(Me)OH (Ar(Me) = 2,6-(t)Bu2-4-MeC6H2) and thiophenol ArSH (Ar = 2,4,6-(t)Bu3C6H2) gives the neutral monomeric cobalt(II) bis(aryloxide) [Co(OAr(Me))2(TMEDA)] (2) and dithiolate [Co(SAr)2(TMEDA)] (3), respectively. Complexes 1-3 have been characterized by mass spectrometry, microanalysis, magnetic moment, and melting-point measurements, in addition to X-ray crystallography.     

Modular approach to tridentate N,O,N' ligands using pyrazolylborate chemistry

Two anionic tridentate N,O,N' chelators, [pz(Ph)B(mu-pz)(mu-O)B(Ph)pz](-) (3(-)) and [pz(Ph)(Ph)B(mu-pz)(mu-O)B(Ph)pz(Ph)](-) (4(-)), as well as the corresponding complexes [Fe(3)(py)Cl], [Fe(3)Cl(2)] and [Cu(3)Cl], have been synthesised and structurally characterised by X-ray crystallography (pz: pyrazolyl, pz(Ph): 3-phenylpyrazolyl, py: pyridine). Since our synthesis approach takes advantage of the highly modular pyrazolylborate chemistry, inexpensive and relatively resistant N,O,N' ligands of varying steric demand are readily accessible. The complexes [Fe(3)(py)Cl] and [Fe(3)Cl(2)] possess a distorted trigonal-bipyramidal configuration with the pyrazolyl rings occupying equatorial positions and the oxygen donor being located at an apical position. The complex [Cu(3)Cl] crystallises as chloro-bridged dimers featuring Cu(II) ions with ligand environments that are intermediate between a square-planar and a trigonal-bipyramidal geometry.     

Amido-based potassium-alkaline earth metallates--synthesis and structures of heterobimetallic complexes of heavy s-block elements

The metathesis reaction of potassium N-isopropylanilide with alkaline earth metal diiodides of calcium, strontium and barium in a molar ratio of 4:1 yields the corresponding alkaline earth metalates of the type [(THF)(n)K(μ-NPhiPr)(2)Ae(μ-NPhiPr)(2)K(THF)(n)] (1: Ae = Ca, n = 2). Stabilization and crystallization of such derivatives succeeds after exchange of the THF ligands by multidentate amino bases such as tetramethylethylenediamine (TMEDA) or pentamethyldiethylenetriamine (PMDETA). The influence of the size and hardness of the alkaline earth metal center on the molecular structures is studied with [(L)K(μ-NPhiPr)(2)Ae(μ-NPhiPr)(2)K(L)] (2: Ae = Ca, L = TMEDA; 3: Ae = Sr, L = TMEDA; 4: Ae = Sr, L = PMDETA; and 5: Ae = Ba, L = PMDETA). The molecular structures are dominated by (attractive and repulsive) electrostatic and steric factors leading to a shortening of the non-bonding AeK distances from calcium to barium.     

Synthesis, structural characterization, and properties of chromium(III) complexes containing amidinato ligands and eta2-pyrazolato, eta(2)-1,2,4-triazolato, or eta1-tetrazolato ligands

Treatment of anhydrous chromium(III) chloride with 2 or 3 equivalents of 1,3-di-tert-butylacetamidinatolithium or 1,3-diisopropylacetamidinatolithium in tetrahydrofuran at ambient temperature afforded Cr(tBuNC(CH3)NtBu)2(Cl)(THF) and Cr(iPrNC(CH3)NiPr)3 in 78% and 65% yields, respectively. Treatment of Cr(tBuNC(CH3)NtBu)2(Cl)(THF) with the potassium salts derived from pyrazoles and 1,2,4-triazoles afforded Cr(tBuNC(CH3)NtBu)2(X), where X=3,5-disubstituted pyrazolato or 3,5-disubstituted 1,2,4-triazolato ligands, in 65-70% yields. X-Ray crystal structure analyses of Cr(tBuNC(CH3)NtBu)2(Me2pz) (Me2pz=3,5-dimethylpyrazolato) and Cr(tBuNC(CH3)NtBu)2(Me2trz) (Me2trz=3,5-dimethyl-1,2,4-triazolato) revealed eta2-coordination of the Me2pz and Me2trz ligands. Treatment of Cr(tBuNC(CH3)NtBu)2(Cl)(THF) with trifluoromethyltetrazolatosodium (NaCF3tetz) in the presence of 4-tert-butylpyridine afforded Cr(tBuNC(CH3)NtBu)2(CF3tetz)(4-tBupy) in 30% yield. An X-ray crystal structure determination showed eta1-coordination of the tetrazolato ligand through the 2-nitrogen atom. The complexes Cr(iPrNC(CH3)NiPr)3 and Cr(tBuNC(CH3)NtBu)2(X) are volatile and sublime with <1% residue between 120 and 165 degrees C at 0.05 Torr. In addition, these complexes are thermally stable at >300 degrees C under an inert atmosphere such as nitrogen or argon. Due to the good volatility and high thermal stability, these new compounds are promising precursors for the growth of chromium-containing thin films using atomic layer deposition.     

Functionalization of aminophosphanes: synthesis and X-ray crystal structure of novel dilithium and trilithium complexes containing silicon-fused heteronuclear SiN2PLi five-membered rings

A first structurally characterized primary aminophosphane (Ar 2PNH 2 ( 2); Ar = 2,4,6- iPr 3C 6H 2) that is a stable solid at room temperature without decomposition by self-condensation is reported. Reactions of N-phosphanyllithium amide ( tBu 2PNHLi ( 3)) with Me 2SiCl 2 and MeSiCl 3 in Et 2O result in the formation of Me 2Si(NHP tBu 2) 2 ( 4) and MeSi(NHP tBu 2) 3 ( 5), respectively. Subsequent treatment of 4 and 5 with 2 and 3 equiv of nBuLi gave the dilithium ( 6) and trilithium ( 7) complexes, respectively. Further treatment of 5 with 3 equiv of AlMe 3 yielded the trialuminum complex MeSi[N(AlMe 2)P tBu 2] 3 ( 8). These three complexes were investigated by microanalysis and multinuclear NMR spectroscopy. The dilithium complex [Me 2Si(NLiP tBu 2) 2.3THF] ( 6) and the trilithium complex [MeSi(NLiP tBu 2) 3.3Et 2O] ( 7) were further characterized by single-crystal X-ray structural analysis.     

Synthesis and structures of monomeric magnesium, calcium, strontium, and barium amides involving the N,N-(2,4,6-trimethylphenyl)(trimethylsilyl)amido ligand

An extended family of aryl-substituted alkaline earth metal silylamides M{N(2,4,6-Me3C6H2)(SiMe3)}donor(n) was prepared using alkane elimination (Mg), salt elimination (Ca, Sr, Ba), and direct metalation (Sr, Ba). Three different donors, THF, TMEDA (TMEDA = N,N,N',N'-tetramethylethylenediamine), and PMDTA (PMDTA = N,N,N',N',N'-pentamethyldiethylenetriamine) were employed to study their influence on the coordination chemistry of the target compounds, producing monomeric species with the composition M{N(2,4,6-Me3C6H2)(SiMe3)}2(THF)2 (M = Mg, Ca, Sr, Ba), M{N(2,4,6-Me3C6H2)(SiMe3)}2TMEDA (M = Ca, Ba), and M{N(2,4,6-Me3C6H2)(SiMe3)}2PMDTA (M = Sr, Ba). For the heavier metal analogues, varying degrees of agostic interactions are completing the coordination sphere of the metals. Compounds were characterized using IR and NMR spectroscopy in addition to X-ray crystallography.     

Neutral zinc, lower-order zincate and higher-order zincate derivatives of pyrrole: synthesis and structural characterisation of zinc complexes with one, two, three or four pyrrolyl ligands

Towards a systematic development of the zinc chemistry of the important five-membered nitrogen heterocycle pyrrole, this work reports the synthesis and characterisation of five crystalline zinc-pyrrolyl complexes. Pyrrolyl in this context means where conversion of the N-H bond to an N-zinc bond has occurred. Two neutral complexes, [(t)BuZn(NC(4)H(4))(TMEDA)·HNC(4)H(4)] 1 and [Zn(NC(4)H(4))(2)(TMEDA)] 2, containing one and two pyrrolyl ligands, respectively, were synthesised by reacting di-t-butylzinc with different amounts of pyrrole in the presence of TMEDA (TMEDA is N,N,N',N'-tetramethylethylenediamine). X-ray crystallographic studies established that both adopt mononuclear structures with the salient feature of the former the presence of an additional parent protonated pyrrole molecule which engages its anionic counterpart in N-H…πC-C interactions. Employing a similar synthetic approach but adding n-butylsodium to the reaction mixture in attempts to form ate derivatives delivered three distinct sodium zincate (anionic zinc) compounds in [{(THF)(2)·NaZn(THF)(NC(4)H(4))(3)}(∞)] 3, [{(TMEDA)·Na}(2)Zn(NC(4)H(4))(4)] 4, and [{(PMDETA)·Na}(2)Zn(NC(4)H(4))(4)] 5 (PMDETA is N,N,N',N',N'-pentamethyldiethylenetriamine). From their crystal structures, the 1?:?1, Na:Zn complex 3 can be classified as a lower-order zincate having three pyrrolyl ligands bound to zinc in a polymeric chain arrangement, while the 2?:?1, Na:Zn complexes 4 and 5 are molecular higher-order zincates having Zn centres fully saturated by four pyrrolyl ligands. Discussion of the structures of 1-5 focuses on the interplay of σ-bonding and π-bonding between the pyrrolyl ligands and the metal centres. Revealingly, the zinc-free sodiopyrrole complex [{(PMDETA)·Na(NC(4)H(4))}(2)] 6, made and characterised for comparison, shows that on its own sodium prefers the former type of bonding, but is forced to switch to the latter type when combined with the stronger Lewis acid zinc in the zincate compositions. Complexes 1-6 have also been characterised in solution by NMR spectroscopy.     

Hypervalent, low-coordinate phosphorus(III) centers in complexes of the phosphadiazonium cation with chelate ligands

Trifluoromethylsulfonyloxy-(2,4,6-tri-tert-butylphenylimino)phosphine, Mes*NPOTf (Mes = 2,4,6-tri-tert-butylphenyl, OTf = trifluoromethanesulfonate, triflate) reacts quantitatively with the multifunctional ligands 2,2'-bipyridine (2,2'-BIPY), N,N,N',N'-tetramethylethylenediamine (TMEDA), 1,2-bis(diethylphosphino)ethane (DEPE), 1,2-bis(diphenylphosphino)ethane (DIPHOS), and N,N,N',N' ',N' '-pentamethyldiethylenetriamine (PMDETA) to give the Lewis acid-base complexes [Mes*NP(2,2'-BIPY)][OTf], [Mes*NP(TMEDA)][OTf], [Mes*NP(DIPHOS)][OTf], [Mes*NP(DEPE)][OTf], and [Mes*NP(PMDETA)][OTf], respectively. Single-crystal X-ray diffraction studies indicate that the closest contact of the ligand donor atoms occurs at phosphorus in all cases, affecting significant displacement of the OTf anion. The resulting cations [Mes*NP(L)]+ are best described as complexes of a neutral chelating ligand on a phosphadiazonium Lewis acceptor, and highlight the potential for electron-rich centers to behave as Lewis acids despite the presence of a lone pair of electrons at the acceptor site. More importantly, the new complexes represent rare examples of systems containing hypervalent, low-coordinate phosphorus(III) centers.