Facile surface immobilization of ATRP initiators on colloidal polymers for grafting brushes and application to colloidal crystals

Bromo-initiators for atom transfer radical polymerization (ATRP) were successfully immobilized on the surfaces of cross-linked poly(methyl methacrylate) (PMMA) spheres by soap-free emulsion polymerization using CBr(4) as the chain transfer agent. Subsequent surface-initiated ATRP (SI-ATRP) afforded a layer of PMMA brushes covalently attached to the sphere surfaces. Colloidal crystal films of these monodisperse spheres were then studied to identify the relationship between variation in particle diameter and the optical properties. The particle diameters were controlled by varying the feed monomer proportions in soap-free emulsion polymerization and the thickness of the grafted brush layer. It was found that the particle diameter could successfully be controlled to obtain crystal films that produce a variety of brilliant colors in the visible region. The results of this study can provide useful information for facile preparation of surface-immobilized ATRP initiators on colloidal polymers and can be employed for grafting polymer brushes.     

Binary hairy nanoparticles: Recent progress in theory and simulations

Binary polymer brushes, including mixed homopolymer brushes and diblock copolymer brushes, are an attractive class of environmentally responsive nanostructured materials. Owing to microphase separation of the two chemically distinct components in the brush, multifaceted nanomaterials with functionalized and patterned surfaces can be obtained. This review summarizes recent progress on the theory and simulations related to binary polymer brushes grafted to flat, spherical, and cylindrical substrates, with a focus on patterned morphologies of multifaceted hairy nanoparticles, an intriguing class of hybrid nanostructured particles (e.g., nanospheres and nanorods). In particular, powerful field theory and particle-based simulations suitable for revealing novel structures on these patterned surfaces, including self-consistent field theory and dissipative particle dynamics simulations, are emphasized. The unsolved yet critical issues in this research field, such as dynamic response of binary polymer brushes to environmental stimuli and the hierarchical self-assembly of binary hairy nanoparticles, are briefly discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1583–1599     

Nanoscale phase separation in mixed poly(tert-butyl acrylate)/polystyrene brushes on silica nanoparticles under equilibrium melt conditions

This communication reports on the study of microphase separation of well-defined mixed poly(tert-butyl acrylate) (PtBA)/polystyrene (PS) brushes on silica nanoparticles under equilibrium melt conditions. Mixed PtBA/PS brushes were synthesized from an asymmetric, difunctional initiator-terminated self-assembled monolayer by combining atom transfer radical polymerization and nitroxide-mediated radical polymerization. Two symmetric PtBA/PS mixed brush samples with different molecular weights were used in this study and were thermally annealed in vacuum at 150 degrees C. For the mixed brushes with number average molecular weights (Mn) of 24 200 g/mol for PtBA and 23 000 g/mol for PS, two glass transitions were observed in the differential scanning calorimetry analysis. Transmission electron microscopy study showed that the two grafted polymers underwent a lateral microphase separation, forming a random worm-like pattern with a feature size of approximately 10 nm on the silica particle surfaces. In contrast, the mixed brushes with a Mn of 10,400 g/mol for PtBA and 11,900 g/mol for PS did not microphase separate. Although the mixed brushes are on curved substrates, this work provides results consistent with the theoretical prediction that symmetric mixed homopolymer brushes undergo lateral rather than vertical phase separation under equilibrium melt conditions.     

Grafting of Polymer Brushes from Xanthate-Functionalized Silica Particles

Monodisperse silica particles (SiPs) were surface-modified with a newly designed silane coupling agent comprising a triethoxysilane and an alkyl halide, namely, 6-(triethoxysilyl)hexyl 2-bromopropionate, which was further treated with potassium O-ethyl dithiocarbonate (PEX) to immobilize xanthate molecules on the particle surfaces. Surface-initiated macromolecular design via interchange of xanthates (MADIX) polymerization of vinyl acetate (VAc) was conducted with the xanthate-functionalized SiPs. The polymerization was well controlled and produced SiPs coated with poly(vinyl acetate) (PVAc) with a well-defined target molar mass and a graft density of about 0.2 chains nm⁻². Dynamic light scattering and TEM measurements revealed that the hybrid particles were highly dispersible in good solvents without any aggregation. The PVAc brushes were hydrolyzed with hydrochloric acid to produce poly(vinyl alcohol) brushes on the SiP surfaces. In addition, the number of xanthate molecules introduced on the SiP surfaces could be successfully controlled by adjusting the concentration of PEX. Thus, the SiPs have two functionalities: xanthates able to act as a MADIX chain-transfer agent and alkyl bromide initiation sites for atom transfer radical polymerization (ATRP). By using these unique bifunctional particles, mixed polymer brushes were constructed on the SiPs by MADIX of VAc followed by ATRP of styrene or methyl methacrylate.     

Mesoscale simulations of the behavior of charged polymer brushes under normal compression and lateral shear forces

Dissipative particle dynamics (DPD) was used to investigate the behavior of two opposing end-grafted charged polymer brushes in aqueous media under normal compression and lateral shear. The effect of polymer molecular weight, degree of ionization, grafting density, ionic strength, and compression on the polymer conformation and the resulting shear force between the opposing polymer layers were investigated. The simulations were carried out for the poly(tert-butyl methacrylate)-block-poly(sodium sulfonate glycidyl methacrylate) copolymer, referred as PtBMA-b-PGMAS, end-attached to a hydrophobic surface for comparison with previous experimental data. Mutual interpenetration of the opposing end-grafted chains upon compression is negligible for highly charged polymer brushes for compression ratios ranging from 2.5 to 0.25. Under electrostatic screening effects or for weakly charged polymer brushes, a significant mutual interpenetration was measured. The variation of interpenetration thickness with separation distance, grafting density, and polymer size follows the same scaling law as the one observed for two opposing grafted neutral brushes in good solvent. However, compression between two opposing charged brushes results in less interpenetration relative to neutral brushes when considering equivalent grafting density and molecular weight. The friction coefficient between two opposing polymer-coated surfaces sliding past each other is shown to be directly correlated with the interpenetration thickness and more specifically to the number of polymer segments within the interpenetration layer.     

Oligo(ethylene glycol) containing polymer brushes as bioselective surfaces

The nitroxide-mediated polymerization of styrenic monomers containing oligo(ethylene glycol) (OEGn) moieties was chosen for the preparation of biocompatible polymer brushes tethered to silicon oxide surfaces due to the broad range of monomer structures available and the use of a nonmetallic initiator. These surfaces were characterized by near-edge X-ray absorption fine structure and water contact angle measurements. The biocompatibility of these grown polymer brushes was studied and compared with deposited assemblies of surface-bound OEGn-terminated silanes with selected chain lengths. Grown polymer brushes with short OEGn side chains suppressed protein adsorption significantly more than the deposited assemblies of short OEGn chains, and this was attributed to higher surface coverage by the brushes. Cell adhesion studies confirmed that OEGn-containing polymer brushes are particularly effective in preventing nonspecific adhesion. Studies of protein adsorption and cell localization carried out with specific ligands on surfaces patterned demonstrated the potential of these surface-tethered polymer brushes for the formation of micro- and nanoscale devices.     

Covalent immobilization of antibody fragments on well-defined polymer brushes via site-directed method

Well-defined polymer brushes and block copolymer brushes consisting of 2-methacryloyloxyethyl phosphorylcholine (MPC) and glycidyl methacrylate (GMA) were prepared by surface-initiated atom transfer radical polymerization (ATRP). The polymer brushes were used for the immobilization of antibody fragments in a defined orientation. Pyridyl disulfide moieties were introduced to the polymer brushes via a reaction of epoxy groups in GMA units. Fab’ fragments were then immobilized onto these surfaces via a thiol-disulfide interchange reaction and the reactivity of antibodies with antigens was investigated. Antigen/antibody binding on the polymer brushes was more preferable than that on epoxysilane films as a control surface. Furthermore, the activity of the antibodies immobilized on the block copolymer brushes having biocompatible PMPC was greater than that on other surfaces that did not have PMPC in their structures.     

Dissipative particle dynamics simulations in the grand canonical ensemble: applications to polymer brushes.

We have used the dissipative particle dynamics (DPD) method in the grand canonical ensemble to study the compression of grafted polymer brushes in good solvent conditions. The force-distance profiles calculated from DPD simulations in the grand canonical ensemble are in very good agreement with the self-consistent field (SCF) theoretical models and with experimental results for two polystyrene brush layers grafted onto mica surfaces in toluene.     

Self-assembly of catecholic macroinitiator on various substrates and surface-initiated polymerization

A catechol-containing macroinitiator has been designed for the surface-initiated atom transfer radical polymerization (SI-ATRP) from various substrates at ambient temperature. Temperature-sensitive poly(N-isopropyl acrylamide) (PNIPAM) brushes were successfully grafted from a range of substrates surfaces, including metals and polyimides, via SI-ATRP using the resulting macroinitiator, which were characterized by X-ray photoelectron spectroscopy (XPS), water contact angle measurements, and atomic force microscopy (AFM). Effects of the temperature response behavior of PNIPAM brushes on the water contact angles and the impedance of the modified surfaces were also exhibited. The self-assembled film of macroinitiator and the resulting polymer brushes were both stable to soaking of basic solvents, and the brushes did not show any exfoliation or delamination even after 2 h of ultrasonic test. The advantages of the macroinitiator in strong interactions with surfaces and high stability and convenience make it possible to modify the native materials with polymer brushes in a convenient and nondestructive way. Importantly, the macroinitiator is compatible with microcontact printing, and patterned polymer brushes on Ti plate were demonstrated by microcontact printing of BrDOPAMA and the following SI-ATRP.     

Particle Penetration into Polydisperse Polymer Brushes: A Theoretical Analysis

Based on theoretical analysis, the effect of polydispersity on particle penetration into polydisperse polymer brushes is investigated. Three different polydispersities representing sharp, moderate, and extremely wide chain length distributions are chosen, since the corresponding explicit expressions of brush density at these polydispersities are available. To simplify the discussion, this study is restricted to spherical particles of small size which ensure that the particle insertion only causes local conformational perturbations. By analyzing the particle distribution, it is found that polydispersity always facilitates particle penetration. This prediction is confirmed by analyzing the surface fluctuations of the brushes. Interestingly, uniform scaling relations are observed for particles penetrating into monodisperse and moderately polydisperse brushes. The uniformity predicted by monodisperse and moderately polydisperse brushes originates from the same asymptotic behavior of their densities approaching the brush edge. This indicates that polydispersity brings significant influence only at high polydispersities.     

Cellular responses to patterned poly(acrylic acid) brushes

We use patterned poly(acrylic acid) (PAA) polymer brushes to explore the effects of surface chemistry and topography on cell-surface interactions. Most past studies of surface topography effects on cell adhesion have focused on patterned feature sizes that are larger than the dimensions of a cell, and PAA brushes have been characterized as cell repellent. Here we report cell adhesion studies for RBL mast cells incubated on PAA brush surfaces patterned with a variety of different feature sizes. We find that when patterned at subcellular dimensions on silicon surfaces, PAA brushes that are 30 or 15 nm thick facilitate cell adhesion. This appears to be mediated by fibronectin, which is secreted by the cells, adsorbing to the brushes and then engaging cell-surface integrins. The result is detectable accumulation of plasma membrane within the brushes, and this involves cytoskeletal remodeling at the cell-surface interface. By decreasing brush thickness, we find that PAA can be 'tuned' to promote cell adhesion with down-modulated membrane accumulation. We exemplify the utility of patterned PAA brush arrays for spatially controlling the activation of cells by modifying brushes with ligands that specifically engage IgE bound to high-affinity receptors on mast cells.     

表面接枝聚合物刷与仿生水润滑研究进展

动物关节的超低摩擦系数和长耐磨寿命主要归功于关节软骨表层以及关节滑液中呈“刷”型结构的生物大分子.人工仿制的表而接枝聚合物刷可以对关节润滑进行功能模拟,本文简要综述了近年来表面接枝聚合物刷的水润滑研究进展.重点讨论了不同类型聚合物刷(天然生物大分子、聚电解质刷、两性离子聚合物刷和中性聚合物刷等)的水润滑机理,最后讨论了目前仿生水润滑研究存在的问题以及未来的发展趋势及应用前景.     

Facile Fabrication of Concentrated Polymer Brushes with Complex Patterning by Photocontrolled Organocatalyzed Living Radical Polymerization

Photocontrolled surface‐initiated reversible complexation mediated polymerization (photo‐SI‐RCMP) was successfully applied to fabricate concentrated polymer brushes with complex patterning structures. Positive‐type patterned polymer brushes were obtained by photo‐SI‐RCMP under visible light (550(±50) nm) using photomasks. A particularly interesting finding was that negative‐type patterned polymer brushes were also obtainable in a facile manner. A nonspecial UV light (250–385 nm) enabled the preparation of pre‐patterned initiator surfaces in a remarkably short time (1 min), leading to negative‐type patterned polymer brushes. Based on this unique selectivity between visible and UV light, the combination of two patterning techniques enabled the preparation of complex patterned brushes, including diblock copolymers, binary polymers, and functional binary polymers, without multistep immobilization of one or more initiators on the surfaces.     

Influence of graft interface polarity on hydration/dehydration of grafted thermoresponsive polymer brushes and steroid separation using all-aqueous chromatography

We have prepared poly( N-isopropylacrylamide) (PIPAAm) brush-grafted surfaces with varied temperature-responsive hydrophobic properties through surface-initiated atom transfer radical polymerization (ATRP). These temperature-responsive surfaces were characterized by chromatographic analysis using modified silica beads as a chromatographic stationary phase in aqueous mobile phase. Mixed silane self-assembled monolayers (SAMs) comprising ATRP initiator and silanes with various terminal functional groups were formed on the silica bead surfaces. IPAAm was then polymerized by ATRP using the CuCl/CuCl2/Me6TREN catalyst system in 2-propanol at 25 degrees C for 16 h. The chromatographic retention behavior of steroids on the resulting PIPAAm brushes made on more polar silane components was distinct from that on more apolar silane interfaces. Retention times for steroids on PIPAAm mixed apolar silane graft interfaces were significantly longer than those on analogous polar silane interfaces due to enhanced dehydration of PIPAAm brushes on apolar silane-grafted surfaces. Changes in retention factor, k', on polar silane PIPAAm-grafted interfaces were relatively large compared to that on apolar PIPAAm grafted interfaces due to larger hydration/dehydration alterations of grafted PIPAAm brushes on the former surfaces. Applied step-temperature gradients from 50 to 10 degrees C show that PIPAAm brushes on polar silane interfaces tend to hydrate more, leading to shorter retention times. In conclusion, the polarity of the grafted interface significantly influences the grafted PIPAAm brush hydration/dehydration characteristics and subsequently also the temperature-modulated separation of bioactive compounds in all-aqueous chromatography.     

Topological Polymer Chemistry Enters Surface Science: Linear versus Cyclic Polymer Brushes

The cyclic polymer topology strongly alters the interfacial, physico‐chemical properties of polymer brushes, when compared to the linear counterparts. In this study, we especially concentrated on poly‐2‐ethyl‐2‐oxazoline (PEOXA) cyclic and linear grafts assembled on titanium oxide surfaces by the “grafting‐to” technique. The smaller hydrodynamic radius of ring PEOXAs favors the formation of denser brushes with respect to linear analogs. Denser and more compact cyclic brushes generate a steric barrier that surpasses the typical entropic shield by a linear brush. This phenomenon, translates into an improved resistance towards biological contamination from different protein mixtures. Moreover, the enhancement of steric stabilization coupled to the intrinsic absence of chain ends by cyclic brushes, produce surfaces displaying a super‐lubricating character when they are sheared against each other. All these topological effects pave the way for the application of cyclic brushes for surface functionalization, enabling the modulation of physico‐chemical properties that could be just marginally tuned by applying linear grafts.     

Single component and selective competitive protein adsorption in a patchy polymer brush: opposition between steric repulsions and electrostatic attractions

This work explores the use of "patchy" polymer brushes to control protein adsorption rates on engineered surfaces and to bind targeted species from protein mixtures with high selectivity but without invoking molecular recognition. The brushes of interest contain embedded cationic "patches" composed of isolated adsorbed poly(l-lysine) coils (PLL) that are about 10 nm in diameter and are randomly arranged on a silica substrate. Around these patches is a protein-resistant poly(ethylene glycol) (PEG) brush that is formed from the adsorption of a PLL-g-PEG graft copolymer on the remaining silica surface. Electrostatic attractions between individual cationic patches and the negative regions of approaching proteins may be energetically insufficient to bind proteins. Furthermore, protein-patch attractions are reduced by steric repulsions between proteins and the PEG brush. We show that protein adsorption, gauged by ultimate short-term coverages and by the initial protein adsorption rate, exhibits an adhesion threshold: pure PEG brushes of the architectures employed here and brushes containing sparse loadings of PLL patches do not adsorb protein. Above a critical PLL patch loading or threshold, protein adsorption proceeds, often dramatically. The PLL patch thresholds are specific to the protein of interest, allowing surfaces to be engineered to adhesively discriminate different proteins within a mixture. The separation achieved is remarkably sharp: one protein adsorbs, but the second is completely rejected from the interface. The surfaces in this study, by virtue of their well-controlled and well-characterized patchy nature, distinguish themselves from multicomponent brushes or brushes used to end-tether peptide sequences and nucleotides.     

Surface grafting of electrochemically crosslinked poly(3,4-ethylenedioxythiophene) (PEDOT) brushes via surface-initiated ring-opening metathesis polymerization

Herein we demonstrated the preparation of 3,4-ethylenedioxythiophene (EDOT) containing polynorbornylene brushes on Au surfaces via surface-initiated ring-opening metathesis polymerization (SI-ROMP). Using solid-state oxidative crosslinking technique, these polymer brushes were electrochemically converted to conjugated polymer networks. Grazing-angle FTIR spectra of polymer brushes clearly showed the characteristic vibrations of EDOT and norbornylene groups. Furthermore, densely covered Au substrates with polynorbornylene brushes were characterized by using scanning electron microscopy and atomic force microscopy.     

Multicomponent polymer brushes

This article describes a general synthetic route to laterally distinctive multicomponent polymer brushes on gold. The procedure involves repeated surface patterning using microcontact printing (muCP) of initiator-terminated thiols without backfilling with inert thiols and surface-initiated atomic transfer radical polymerization steps. In between brush growth, the remaining initiator moieties are deactivated to avoid reinitiation on existing brushes. Optical and fluorescence microscopy, atomic force microscopy, attenuated total reflectance Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy have been used to characterize every step of this procedure. We found that brushes can be grown from initiator-modified surfaces that contain bare gold areas and that these areas remain available for further patterning using muCP. To demonstrate the flexibility of this approach, surfaces containing four different polymer brushes in patterns ranging from 2 x 4 microm lines to 20 x 20 microm squares were fabricated. The range of chemical functionalities incorporated includes cationic and anionic polyelectrolytes, as well as thermally responsive polymers.     

Site-specific dense immobilization of antibody fragments on polymer brushes supported by silicone nanofilaments

For site-specific dense immobilization of antibodies on a solid support, we prepared phosphorylcholine copolymer brushes on silicone nanofilaments. The nanofilaments were prepared on a silicon wafer by treatment with trichloromethylsilane (MeSiCl 3). To generate Si-OH groups on the nanofilaments, O 2 plasma was irradiated on the surface. Initiators for atom transfer radical polymerization (ATRP) were then coupled on the filaments. Phosphorylcholine copolymer brushes were prepared by a "grafting from" process, and pyridyl disulfide groups were introduced into the polymer chains. F(ab') fragments were then specifically immobilized onto these surfaces via a thiol-disulfide interchange reaction. The amount of antibodies immobilized on the nanofilament-supported copolymer brushes was approximately 65 times greater than that on smooth wafer-supported copolymer brushes.     

Branched fluoropolymer-Si hybrids via surface-initiated ATRP of pentafluorostyrene on hydrogen-terminated Si(100) surfaces

Linear, branched, and arborescent fluoropolymer-Si hybrids were prepared via surface-initiated atom transfer radical polymerization (ATRP) from the 4-vinylbenzyl chloride (VBC) inimer and ClSO(3)H-modified VBC that were immobilized on hydrogen-terminated Si(100), or Si-H, surfaces. The simple approach of UV-induced coupling of VBC with the Si-H surface provided a stable, Si-C bonded monolayer of "monofunctional" ATRP initiators (the Si-VBC surface). The aromatic rings of the Si-VBC surface were then sulfonated by ClSO(3)H to introduce sulfonyl chloride (-SO(2)Cl) groups and to give rise to a monolayer of "bifunctional" ATRP initiators. Kinetics study indicated that the chain growth of poly(pentafluorostyrene) from the functionalized silicon surfaces was consistent with a "controlled" or "living" process. The chemical composition and functionality of the silicon surface were tailored by the well-defined linear and branched fluoropolymer brushes. Atomic force microscopy images revealed that the surface-initiated ATRP of pentafluorostyrene (PFS) had proceeded uniformly on the Si-VBC surface to give rise to a dense and molecularly flat surface coverage of the linear brushes. The uniformity of surfaces with branched brushes was controlled by varying the feed ratio of the monomer and inimer (VBC in the present case). The living chain ends on the functionalized silicon surfaces were used as the macroinitiators for the synthesis of diblock copolymer brushes, consisting of the PFS and methyl methacrylate polymer blocks.