Chromatography of amphiphilic graft copolymers

Amphiphilic comb polymers were prepared through grafting poly(ethylene glycol) methyl ether (MPEG 2000) onto acrylic and methacrylic copolymers. The graft copolymers were purified from unreacted MPEG by partition chromatography on methanol pretreated fibrous cellulose using ethyl acetate and methanol as eluents. The separation was found to depend on the water contents of the cellulose and the eluents. It is proposed that one parameter of importance for the chromatographic separation is the formation of hydrated inverted micelles. The amphiphilic comb polymers were shown by gel chromatography on Sepharose to form high molecular weight aggregates in water. On addition of sodium lauryl sulphate or inorganic salts to the eluent at low ionic strengths these aggregates dissociated and were fractionated by the gel. It was also shown that on GPC in THF solution on Styragel columns the polymers exhibited apparent molecular weights equal or smaller than those of the corresponding backbones. This effect may be a consequence of the graft copolymers having relatively small hydrodynamic volumes, and this idea is supported by the fact that their intrinsic viscosities generally were lower than those of the backbones. However, adsorption on the Styragel columns also may be of importance.     

Star-graft copolymers. Synthesis of amphiphilic graft copolymers with star-branched poly(oxyethylene) side chains

The synthesis of novel amphiphilic star-graft (SG) copolymers containing hydrophilic poly(oxyethylene) (PEO) side chains attached to a hydrophobic backbone by multifunctional entity is reported. In a first step poly(phthalimidoacrylate-co-styrene) was converted into polymers containing different number of multifunctional branching cites distributed along the main chain by partial aminolysis of the phthalimidoacrylate units with tris(hydroxymethyl)aminomethane. In the second step, these reactive copolymers yielded SG copolymers with different number of star-shaped PEO side groups by reaction with isocyanato terminated methoxy–PEO. The copolymers were characterized by size-exclusion chromatography, IR-, and NMR-spectroscopy. Their thermal properties were examined by thermal gravimetric analysis and differential scanning calorimetry. The studies indicate that the grafting degree and hydrogen bonding determine to a great extent the behavior of the SG copolymers in solid state and in solution. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 673–679, 1997     

Poly(N‐vinylpyrrolidone)–polydimethylsiloxane amphiphilic ABA triblock copolymers

Triblock copolymers of N‐vinylpyrrolidone (NVP) and polydimethylsiloxane (PDMS) were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization using two different types of difunctional telechelic PDMS‐based dixanthate macroinitiators. The incorporation of PDMS into the triblock copolymers was evidenced by ¹H NMR spectroscopy and varied between 4 mol % and as high as 20 mol %, dependent on reaction time and monomer conversion. The copolymer homogeneity was characterized in terms of molecular weight distribution determined by GPC to estimate the level of control over the chain length. Monomodal molecular weight distributions were observed, and ¹H NMR spectroscopy indicated the copolymers had number average molecular weights (M_n) ranging between 28,000 and 160,000 g/mol. In addition, thin film phase separation and critical micelle concentrations for these copolymers were analyzed via transmission electron microscopy and surface tension measurements, respectively. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3387–3394     

Self-assembled micelles of novel graft amphiphilic copolymers for drug controlled release

In this study, with the aim of designing an ideal anticancer drug carrier, we synthesized novel amphiphilic graft copolymers, P(Glu-alt-PEG)-graft-PCLA, based on poly(ethylene glycol) (PEG) segments and glutamic acid (Glu) units as the hydrophilic main chain, and poly(?-caprolactone-co-lactide) (PCLA) as hydrophobic branches. The chemical structure of the copolymers was characterized by (1)H MNR and FT-IR. The self-assembly of the copolymers to form micelles was studied by TEM, DLS and fluorescence spectroscopy. In vitro doxorubicin controlled release studies demonstrated that these graft copolymer micelles had high drug loading capacity and good controlled released properties, demonstrating their potential as a novel anticancer drug carrier. The drug loaded graft copolymer micelles exhibited efficient inhibition of HeLa cells in in vitro studies.     

Poly(iminomethylene) copolymers

Copolymerization of an isocyanide giving an insoluble homopolymer with another isocyanide giving a soluble homopolymer in ethanol solution using 0.5–1% of a nickel (II) catalyst in many cases gives a soluble copolymer containing pendant groups arising from both isocyanides. Thus, methyl isocyanide, which gives an insoluble homopolymer, gives chloroform-soluble copolymers incorporating 39–44% of pendant methyl groups when copolymerized with equimolar amounts of tert-butyl isocyanide or several aryl isocyanides. Similarly, cyclohexyl isocyanide, which also gives an insoluble homopolymer, gives chloroform-soluble copolymers incorporating 43–59% of pendant cyclohexyl groups when copolymerized with equimolar amounts of several aryl isocyanides. The compositions, chloroform solubilities, and polystyrene equivalent molecular weights are given for 33 different copolymers obtained by copolymerizations of various equimolar binary mixtures of the monomers CH₃NC, (CH₃)₃CNC, cyclo-C₆H₁₁NC, C₂H₅NC, CH₃CH?CHNC,(CH₃)₂C?CHNC, 2,4,6-(CH₃)₃C₆H₂CH?CHNC, C₆H₅CH(CH₃)NC, CH₂?CHNC, (CH₃)₃CCH?CHNC, C₆H₅NC, 2- and 4-CH₃C₆H₄NC and 2-, 3-, 4-CH₃OC₆H₄NC using the nickel (II) catalyst system.     

ESR spectroscopy to determine the molecular mobility of poly(ethylene oxide) grafts in amphiphilic graft copolymers

The ethylene oxide (EO) mobility in polystyrene-graft-[poly(ethylene oxide)] (PS-g-PEO) and polystyrene-graft-[stearyl poly(ethylene oxide)] (PS-g-SPEO) copolymers was evaluated by spin probe techniques. The ESR spectra indicate that 4-hydroxyl-TEMPO (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl) is strongly biased to the PEO phase of the PS-g-(S)PEO membranes. The rotational correlation time τ_c can also be employed to assess the PEO mobility in PS-g-(S)PEO membranes. Although τ_c of PS-g-(S)PEO usually decreases with increasing surface density of EO, it is of interest that τ_c is rather high when the surface within a depth of at least 5 nm is fully occupied by SPEO (sample PS-g-SPEO-72.6).     

New amphiphilic polymers: Poly(N-alkylacrylamide-CO-vinylpyridinium)

A series of new amphiphilic polymers containing various amounts of N-methyl-4-vinylpyridinium units as hydrophilic part and N-dodecylacrylamide or N-decylacrylamide units as hydrophobic part have been prepared by quaternizing the cognate copolymers. Their behaviour in aqueous solutions has been studied by viscometry, as well as by fluorescence spectroscopy and tensiometry. Results are discussed in detail and a conformational model of the macromolecules at the interface (water/methylcyclohexane) is proposed in relation to the formation of microdomains in the aqueous media.     

Formation of polymer vesicles by amphiphilic fluorosiloxane graft copolymers in solution

Amphiphilic fluorosiloxane graft copolymers with a poly(dimethylsiloxane)(PDMS) backbone,a hydrophobic fluorosiloxane side-chain and three hydrophilic poiyether side-chains were synthesized by hydrosilation reaction in this work.The micellization of amphiphilic graft copolymers in the water/ethanol solvent system was investigated,and vesicles with different size were formed after the self-assembly system was aged for different time.     

Novel amphiphilic graft copolymers bearing hydrophilic poly(acrylic acid) backbones and hydrophobic poly(butyl methacrylate) side chains

A novel amphiphilic graft copolymer consisting of hydrophilic poly(acrylic acid) backbones and hydrophobic poly(butyl methacrylate) side chains was synthesized by successive atom transfer radical polymerization followed by hydrolysis of poly‐(methoxymethyl acrylate) backbone. A grafting‐from strategy was employed for the synthesis of graft copolymers with narrow molecular weight distributions (polydispersity index < 1.40). Hydrophobic side chains were connected to the backbone through stable C? C bonds instead of ester connections. Poly(methoxymethyl acrylate) backbone was easily hydrolyzed to poly(acrylic acid) backbone with HCl without affecting the hydrophobic side chains. The amphiphilic graft copolymer could form stable micelles in water. The critical micelle concentration in water was determined by a fluorescence probe technique. The morphology of the micelles was preliminarily explored with transmission electron microscopy and was found to be spheres. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6857–6868, 2006     

Evaluation of the transport properties of Poly(3-hydroxybutyrate) and its 3-hydroxyvalerate copolymers for packaging applications

Poly(3-hydroxybutyrate) (PHB) and ist 3-hydroxyvalerate containing copolymers form a family of fully biodegradable polyesters with many potential applications. In this work, the results obtained in our laboratory concerning carbon dioxide, water and organic solvent transport through PHB and three low 3-hydroxyvalerate copolymers are reviewed. Comparison established between the former results and some data taken from the literature, have revealed that PHB and the above mentioned copolymers show transport properties similar to other common thermoplastics such as PVC and PET, particularly in the case of carbon dioxide and water. Consequently, PHB and copolymers can be catalogued as good barrier materials against these penetrants. On the other hand, these biopolymers show a low barrier character against organic compound permeation. All these features conform a good balance of physicochemical properties for these polyhydroxyalkanoates, which may take them suitable for several applications, including its use in biodegradable packaging materials.     

Syntheses of amphiphilic biodegradable copolymers of poly(ethyl ethylene phosphate) and poly(3-hydroxybutyrate) for drug delivery

Biodegradable and amphiphilic triblock copolymers poly(ethyl ethylene phosphate)-poly(3-hydroxy-butyrate)-poly(ethyl ethylene phosphate) (PEEP-b-PHB-b-PEEP) have been successfully synthesized through ring-opening polymerization. The structures are confirmed by gel permeation chromatography and NMR analyses. Crystallization investigated by X-ray diffraction reveals that the block copolymer with higher content of poly(ethyl ethylene phosphate) (PEEP) is more amorphous, showing decreased crystallizability. The obtained copolymers self-assemble into biodegradable nanoparticles with a core-shell micellar structure in aqueous solution, verified by the probe-based fluorescence measurements and transmission electronic microscopy (TEM) observation. The hydrophobic poly(3-hydroxybutyrate) (PHB) block serves as the core of the micelles and the micelles are stabilized by the hydrophilic PEEP block. The size and size distribution are related to the compositions of the copolymers. Paclitaxel (PTX) has been encapsulated into the micelles as a model drug and a sustained drug release from the micelles is observed. MTT assay also demonstrates that the block copolymers are biocompatible, rendering these copolymers attractive for drug delivery. Supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No.20060358036)     

Effect of the structure of amphiphilic poly(ethylene glycol)‐containing graft copolymers on styrene emulsion polymerization

Amphiphilic graft copolymers consisting of monomeric units of poly(ethylene glycol) monomethyl ether acrylate, lauryl or stearyl methacrylate, and 2‐hydroxyethyl methacrylate were synthesized and characterized. The effectiveness of these poly(ethylene glycol)‐containing graft copolymers in stabilizing styrene emulsion polymerization was evaluated. The polymerization rate (R_p) increases with increasing graft copolymer concentration, initiator concentration, or temperature. At a constant graft copolymer concentration, R_p increases, and the amount of coagulum decreases with the increasing hydrophilicity of graft copolymers. The polymerization system does not follow Smith–Ewart case II kinetics. The desorption of free radicals out of latex particles plays an important role in the polymerization kinetics. The overall activation energy and the activation energy for the radical desorption process are 85.4 and 34.3 kJ/mol, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1608–1624, 2002     

P(OEGMA-co-LMA) hyperbranched amphiphilic copolymers as self-assembled nanocarriers

We report on the synthesis of novel amphiphilic hyperbranched copolymers, namely Hyperbranched-[poly (ethylene glycol) methyl ether methacrylate-co-lauryl methacrylate] (H-[P(OEGMA-co-LMA)]), obtained by reversible addition-fragmentation chain transfer (RAFT) polymerization utilizing the divinyl monomer, ethylene glycol dimethacrylate (EGDMA) as the branching agent. Molecular characterization by size exclusion chromatography (SEC) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy indicated the success of the polymerization. The self-assembly behavior in aqueous media was investigated by light scattering techniques and fluorescence spectroscopy. The hyperbranched copolymers form multimolecular aggregates of nanoscale dimensions with a low critical aggregation concentration. In addition, the model hydrophobic drug, curcumin (CUR), known also for its intrinsic fluorescence properties, was used in order to investigate the H-[P(OEGMA-co-LMA)] copolymers drug encapsulation ability. Curcumin is successfully loaded into the polymeric nanoparticles, as confirmed by dynamic light scattering and UV–Vis spectroscopy. Interestingly, curcumin hydrophobic interactions with the hyperbranched copolymers result in more well-defined co-assembled nanostructures, in terms of size and size distribution. The mixed copolymer-CUR nano-assemblies consist of small size nanoparticles (<100 nm) which exhibit relatively high size uniformity, colloidal stability and fluorescent properties. Overall, results signify that the biocompatible H-[P(OEGMA-co-LMA)] nanostructures could potentially serve as nanocarrier systems for drug delivery and bio-imaging applications.     

Isomorphism in the poly(3,3-bis-hydroxymethyloxetane) family and copolymers: Poly (3,3-bis-hydroxymethyloxetane-co-3-methyl-3-hydroxymethyloxetane)

Copolymers of 3,3-bis-hydroxymethyloxetane, BHMO, 3-metyl-3-hydroxymethyloxetane, MHMO, or with 3-ethyl-3-hydroxymethyloxetane, EHMO, monomer units were characterized by x-ray fiber diffraction, differential scanning calorimetry and ¹³C solid-state nuclear magnetic resonance (NMR). The copolymers are statistically random and crystalline throughout the range of compositions. Both P(BHMO) and P(MHMO) appear to crystallize in the same crystal form. The fiber repeat indicates a planar zigzag backbone conformation, c(fiber axis) = 4.77 ± 0.03 Å. Similarities in the x-ray fiber diagrams as well as a linear dependence of T_m with composition of copolymer with no change in fiber diagrams indicates isomorphism, a phenomenon in which the random substitution of MHMO monomeric units into the crystalline lattice of P(BHMO) occurs without hindering crystallization of the resulting copolymer. © 1994 John Wiley & Sons, Inc.     

Synthesis and properties of graft copolymers based on poly(3-hydroxybutyrate) macromonomers

Graft copolymers of poly(methyl methacrylate) with poly(3-hydroxybutyrate), PHB, segments as long side chains were prepared by the macromonomer method. PHB macromonomers were prepared from the esterification of oligomers with 2-hydroxyethyl methacrylate at their carboxylic acid end. Esterification products displayed low polydispersity indices (ca. 1.2) and a functionality of over 83%, with a Mn of 2,020. Using free radical polymerization methods, the macromonomers were copolymerized with methyl methacrylate to yield graft (comb type) copolymers at different comonomer feed ratios. The graft copolymers contained from 0.5 to 14 mol-% of PHB blocks, with a glass transition temperature decreasing from 100 to 3 degrees C.     

A successive route to amphiphilic graft copolymers with a hydrophilic poly(3‐hydroxypropyl methacrylate) backbone and hydrophobic polystyrene side chains

A successive method for preparing novel amphiphilic graft copolymers with a hydrophilic backbone and hydrophobic side chains was developed. An anionic copolymerization of two bifunctional monomers, namely, allyl methacrylate (AMA) and a small amount of glycidyl methacrylate (GMA), was carried out in tetrahydrofuran (THF) with 1,1‐diphenylhexyllithium (DPHL) as the initiator in the presence of LiCl ([LiCl]/[DPHL]₀ = 2), at −50 °C. The copolymer poly(AMA‐co‐GMA) thus obtained possessed a controlled molecular weight and a narrow molecular weight distribution (M_w /M_n = 1.08–1.17). Without termination and polymer separation, a coupling reaction between the epoxy groups of this copolymer and anionic living polystyrene [poly(St)] at −40 °C generated a graft copolymer with a poly(AMA‐co‐GMA) backbone and poly(St) side chains. This graft copolymer was free of its precursors, and its molecular weight as well as its composition could be well controlled. To the completed coupling reaction solution, a THF solution of 9‐borabicyclo[3.3.1]nonane was added, and this was followed by the addition of sodium hydroxide and hydrogen peroxide. This hydroboration changed the AMA units of the backbone to 3‐hydroxypropyl methacrylate, and an amphiphilic graft copolymer with a hydrophilic poly(3‐hydroxypropyl methacrylate) backbone and hydrophobic poly(St) side chains was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1195–1202, 2000     

Supercritical carbon dioxide assisted synthesis of amphiphilic graft copolymers based on poly(styrene-co-maleic anhydride) with methoxyl poly(ethylene glycol) side chains

Supercritical carbon dioxide（scCO₂） was used as a reaction medium in synthesizing amphiphilic graft copolymers composed of poly（styrene-co-maleic anhydride）（SMA） backbones and methoxyl poly（ethylene glycol）（MPEG） side chains via esterification.The synthesized copolymers were characterized by Fourier transform infrared spectroscopy（FTIR）,gel permeation chromatography（GPC）,¹H-NMR,thermo-gravimetric analysis（TGA） and differential scanning calorimetric analysis（DSC）.The gelation phenomenon was suppressed effectively by tuning reaction conditions.The influences of scCO₂ temperature and pressure on the conversion of anhydride were investigated.It was found that the highest conversion ratio occurred at 80℃under a constant pressure of 14 MPa or 26 MPa.With the increase of scCO₂ pressure,the conversion ratio increased first,and then leveled off.The conversion ratio of anhydride could be controlled by regulating the reaction conditions.It was also revealed that using low molecular weight MPEG brought a high conversion ratio of anhydride.     

Synthesis and self-assembly behaviors of four-armed amphiphilic polystyrene-b-poly(N-isopropylacrylamide) copolymers

Four-armed amphiphilic block copolymers polystyrene-b-poly(N-isopropyl acrylamide) (PSt-b-PNIPAAM)₄ were synthesized by atom transfer radical polymerization (ATRP) in two steps. Star narrow dispersed polystyrene, (PSt-Br)₄, with controlled number-average molecular weight was firstly synthesized by ATRP of styrene (St) using pentaerythritol tetrakis (2-bromoisobutyrate) (4Bri-Bu) as four-armed initiator. Then, (PSt-b-PNIPAAM)₄ was prepared using (PSt-Br)₄ as macroinitiator by ATRP. The structures of (PSt-Br)₄ and (PSt-b-PNIPAAM)₄ were confirmed by characterization by nuclear magnetic resonance (¹H NMR). The apparent viscosity of the four-armed (PSt-b-PNIPAAM)₄ was significantly lower than that of the linear PSt-b-PNIPAAM with the same amount of repeat units of PSt and PNIPAAM. The self-assembly behavior of the four-armed amphiphilic block copolymers (PSt-b-PNIPAAM)₄ in mixed solution (DMF/H₂O) and the lower critical solution temperature (LCST) of the resulting micelles were investigated by scanning electron microscopy (SEM), dynamic light scattering (DLS) and UV-VIS spectroscopy. The results show that the size of the mono-dispersed spherical micelles decreased with the increment of the chain length of PNIPAAM in the block copolymers, while LCST increased.     

Poly(3-alkylthiophene) diblock copolymers with ordered microstructures and continuous semiconducting pathways

Conjugated rod-coil diblock copolymers self-assemble due to a balance of liquid crystalline (rod-rod) and enthalpic (rod-coil) interactions. Previous work has shown that while classical block copolymers self-assemble into a wide variety of nanostructures, when rod-rod interactions dominate self-assembly in rod-coil block copolymers, lamellar structures are preferred. Here, it is demonstrated that other, potentially more useful, nanostructures can be formed when these two interactions are more closely balanced. In particular, hexagonally packed polylactide (PLA) cylinders embedded in a semiconducting poly(3-alkylthiophene) (P3AT) matrix can be formed. This microstructure has been long-sought as it provides an opportunity to incorporate additional functionalities into a majority phase nanostructured conjugated polymer, for example in organic photovoltaic applications. Previous efforts to generate this phase in polythiophene-based block copolymers have failed due to the high driving force for P3AT crystallization. Here, we demonstrate that careful design of the P3AT moiety allows for a balance between crystallization and microphase separation due to chemical dissimilarity between copolymer blocks. In addition to hexagonally packed cylinders, P3AT-PLA block copolymers form nanostructures with long-range order at all block copolymer compositions. Importantly, the conjugated moiety of the P3AT-PLA block copolymers retains the crystalline packing structure and characteristic high time-of-flight charge transport of the homopolymer polythiophene (μ(h) ~10(-4) cm(2) V(-1) s(-1)) in the confined geometry of the block copolymer domains.     

Poly(oxanorbornenedicarboximide)s dendronized with amphiphilic poly(alkyl ether) dendrons

Attaching dendritically branched side chains to each repeat unit of a linear polymer produces molecular building blocks of nanometer‐sized dimensions called dendronized polymers. The structure of these complex molecular architectures is highly tunable and, therefore, of interest for a wide range of potential applications. The first examples of dendronized polymers prepared by living ring‐opening metathesis polymerization of oxanorbornenedicarboximide macromonomers with poly(alkyl ether) dendrons are reported. Small‐angle X‐ray scattering experiments on bulk samples confirm that the diameter of the individual cylindrical polymers can be tailored by the choice of dendron generation or the length of the hydrocarbon peripheral group. Analysis of the SAXS data based on a core‐shell model indicates that although the diameter of the cylinder increases with generation, the size of the core does not change; this suggests that these dendrons only loosely encapsulate the polymer backbone. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3221–3239