Calorimetric study of poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K

For the first time, the heat capacity $ C_{\text{p}}^{^\circ } $ of poly(2-ethylhexyl acrylate) has been studied in an adiabatic vacuum calorimeter between 7 and 350 K, the standard thermodynamic functions: heat capacity $ C_{\text{p}}^{^\circ } $ (T), enthalpy H°(T) ? H°(0), entropy S°(T) ? S°(0), Gibbs function G°(T) ? H°(0) have been calculated from T → 0 to 350 K. The energy of combustion Δ_c U of the compound under study has been measured in a calorimeter with a stationary bomb and an isothermal shell. The standard enthalpy of combustion Δ_c H° and thermodynamic parameters of formation—enthalpy Δ_f H°, entropy Δ_f S°, Gibbs function Δ_f G°—at T = 298.15 K have been calculated. The results have been used to calculate the thermodynamic characteristics of 2-ethylhexyl acrylate bulk polymerization into poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K.     

Thermodynamic Solvation of a Series of Homologous α-Amino Acids in Aqueous Mixtures of 1,2-Dimethoxyethane

The standard Gibbs energies $ \left( {\Updelta {}_{\text{t}}G^\circ (i)} \right) $ ( Δ t G ° ( i ) ) and entropies $ \left( {\Updelta {}_{\text{t}}S^\circ } \right) $ ( Δ t S ° ) of transfer in aqueous mixtures of 1,2-dimethoxyethane (DME) containing 0, 20, 40, 60, 80, 100 wt-% DME have been determined from the solubility data of a series of homologous α-amino acids, evaluated by the formol titrimetric method. The observed result of Δ_t G°(i) and TΔ_t S°(i) against DME concentration profiles are complicated due to the various interaction effects. The chemical effects on the transfer Gibbs energies ( $ \Updelta_{\text{t}} G_{\text {ch}}^{ \circ } (i) $ Δ t G ch ° ( i ) ) and entropies of transfer $ T\Updelta_{\text{t}} S_{\text {ch}}^{ \circ } (i) $ T Δ t S ch ° ( i ) have been obtained after elimination of the cavity effect, calculated by the scaled particle theory, and dipole–dipole interaction effects, estimated by the use of Keesom-orientation expression for total transfer Gibbs energies Δ_t G°(i) and entropies Δ_t S°, respectively. The chemical transfer energetics of the zwitterionic homologous α-amino acids are guided by the composite effects of increased dispersion interaction, basicity and decreased acidity, hydrogen bonding capacity and hydrophobic hydration of the DME mixed solvent as compared to that of reference solvent, water.     

Crystal structure and thermodynamic properties of dipotassium diiron(III) hexatitanium oxide

In the present work, the temperature dependence of heat capacity of dipotassium diiron(III) hexatitanium oxide has been measured for the first time in the range from 10 to 300 K by means of precision adiabatic vacuum calorimetry. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity $ C_{p}^{ \circ } (T) $ , enthalpy $ H^{ \circ } (T) - H^{ \circ } (0) $ , entropy $ S^{ \circ } (T) - S^{ \circ } (0), $ and Gibbs function $ G^{ \circ } (T) - H^{ \circ } (0) $ for the range from T → 0 to 300 K. The structure of K₂Fe₂Ti₆O₁₆ is refined by the Rietveld method: space group I4/m, Z = 1, a = 10.1344(2) Å, c = 2.97567(4) Å, V = 305.618(7) Å³. The high-temperature X-ray diffraction was used for the determination of coefficients of thermal expansion.     

Thermodynamic study of metal corrosion and inhibitor adsorption processes in copper/N-1-naphthylethylenediamine dihydrochloride monomethanolate/nitric acid system: part 2

N-1-Naphthylethylenediamine dihydrochloride monomethanolate (N-NEDHME) was tested as a corrosion inhibitor for copper in 2 M HNO₃ solution using the standard gravimetric technique at 303–343 K. N-NEDHME acts as an inhibitor for copper in an acidic medium. Inhibition efficiency increases with increase in concentration of N-NEDHME but decreases with a rise in temperature. Thermodynamic parameters such as adsorption heat ( $ \Updelta H_{\text{ads}}^\circ $ ), adsorption entropy ( $ \Updelta S_{\text{ads}}^\circ $ ) and adsorption free energy ( $ \Updelta G_{\text{ads}}^\circ $ ) were obtained from experimental data of the temperature studies of the inhibition process at five temperatures ranging from 303 to 343 K. Kinetic parameters activation such as $ E_{a} $ , $ \Updelta H_{\text{a}}^\circ $ , $ \Updelta S_{\text{a}}^\circ $ and pre-exponential factors have been calculated and are discussed. Adsorption of N-NEDHME on the copper surface in 2 M HNO₃ follows the Langmuir isotherm model.     

Chemical Transfer Energies of Some Homologous Amino Acids and the –CH2– Group in Aqueous DMF: Solvent Effect on Hydrophobic Hydration and Three Dimensional Solvent Structure

Standard transfer Gibbs energies, $ \Updelta_{\text{tr}} G^{^\circ } $ , of a series of homologues α-amino acids have been evaluated by determining the solubility of glycine, alanine, amino butyric acid and norvaline gravimetrically at 298.15 K. Standard entropies of transfer, $ \Updelta_{\text{tr}} S^{^\circ } $ , of the amino acids have also been evaluated by extending the solubility measurement to five equidistant temperatures ranging from 288.15 to 308.15 K. The chemical contributions $ \Updelta_{\text{tr,ch}} G^{^\circ } (i) $ of α-amino acids, as obtained by subtracting theoretically computed contributions to $ \Updelta_{\text{tr}} G^{ \circ } $ due to cavity and dipole–dipole interaction effects from the corresponding experimental $ \Updelta_{\text{tr}} G^{ \circ } $ , are indicative of the superimposed effect of increased basicity and dispersion and decreased hydrophobic hydration (hbh) in DMF–water solvent mixtures as compared to those in water, while, in addition, $ T\Updelta_{\text{tr,ch}} S^{^\circ } (i) $ is guided by structural effects. The computed chemical transfer energies of the –CH₂– group, $ \Updelta_{\text{tr,ch}} P^{^\circ } $ (–CH₂–) [P = G or S] as obtained by subtracting the value of lower homologue from that of immediately higher homologue, are found to change with composition indicating involvement of several opposing factors in the calculation of the chemical interactions. The $ \Updelta_{\text{tr,ch}} G^{^\circ } $ (–CH₂–) values are found to be guided by the decreased hydrophobic effect in DMF–water mixtures, and are indicative of the nature of the three dimensional structure of the aquo-organic solvent system around each solute.     

Thermochemistry of hydroxymethylphenol isomers

The standard (p° = 0.1 MPa) molar enthalpies of formation in the crystalline state of the 2-, 3- and 4-hydroxymethylphenols, $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr)}} = \, - ( 3 7 7. 7 \pm 1. 4)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr) }} = - (383.0 \pm 1.4) \, \,{\text{kJ}}\,{\text{mol}}^{ - 1} $ and $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr)}} = - (382.7 \pm 1.4)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , respectively, were derived from the standard molar energies of combustion, in oxygen, to yield CO₂(g) and H₂O(l), at T = 298.15 K, measured by static bomb combustion calorimetry. The Knudsen mass-loss effusion technique was used to measure the dependence of the vapour pressure of the solid isomers of hydroxymethylphenol with the temperature, from which the standard molar enthalpies of sublimation were derived using the Clausius–Clapeyron equation. The results were as follows: $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (99.5 \pm 1.5)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (116.0 \pm 3.7) \,{\text{kJ}}\,{\text{mol}}^{ - 1} $ and $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (129.3 \pm 4.7)\,{\text{ kJ mol}}^{ - 1} $ , for 2-, 3- and 4-hydroxymethylphenol, respectively. From these values, the standard molar enthalpies of formation of the title compounds in their gaseous phases, at T = 298.15 K, were derived and interpreted in terms of molecular structure. Moreover, using estimated values for the heat capacity differences between the gas and the crystal phases, the standard (p° = 0.1 MPa) molar enthalpies, entropies and Gibbs energies of sublimation, at T = 298.15 K, were derived for the three hydroxymethylphenols.     

The standard molar enthalpy of formation of Ce2(MoO4)3(s) and Sm2(MoO4)3(s) using solution calorimetry

The enthalpies of formations of Ce₂(MoO₄)₃(s) and Sm₂(MoO₄)₃(s) have been measured at 298.15 K using semi adiabatic solution calorimetry. The precipitation reaction between RE(NO₃)₃·6H₂O(s) (R= Ce, Sm) and ammonical solution of Na₂MoO₄(s) was studied. From the enthalpy of precipitation and other required auxiliary data, $ \Updelta_{\text{f}} H_{\text{m}}^{ \circ } \left( { 2 9 8. 1 5 {\text{ K}}} \right) $ Δ f H m ° ( 2 9 8.1 5 K ) of Ce₂(MoO₄)₃(s) and Sm₂(MoO₄)₃(s) have been calculated for the first time as ?4388.7 ± 3.6 and ?4363.4 ± 4.1 kJ mol^?1, respectively. The enthalpy of hydration of anhydrous Ce(NO₃)₃(s) to Ce(NO₃)₃·6H₂O(s) has been calculated. $ \Updelta_{\text{f}} H_{\text{m}}^{ \circ } \left( {{\text{MoO4}}^{ 2- } ,\,{\text{aq}},\, 2 9 8. 1 5 \,{\text{K}}} \right) $ Δ f H m ° ( MoO4 2 ? , aq , 2 9 8.1 5 K ) has also been measured and calculated as ?995.1 kJ mol^?1 from required literature data.     

Thermodynamic properties of crystalline phosphate Ba0.5Zr2(PO4)3 over the temperature range from T → 0 to 610 K

The temperature dependence of the heat capacity of crystalline barium zirconium phosphate C _p ^o  = f(T) was measured over the temperature range 6–612 K. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H°(T) ? H°(0), S°(T), G°(T) ? H°(0) over the temperature range from T → 0 to 610 K and standard entropy of formation at 298.15 K. The data on the low-temperature (6 ≤ T/K ≤ 50) heat capacity were used to determine the fractal dimension of Ba_0.5Zr₂(PO₄)₃. Conclusions concerning the topology of the structure of phosphate were drawn. Thermodynamic properties of M_0.5Zr₂(PO₄)₃ (M = Ca, Sr, Ba) were compared.     

The standard molar enthalpies of formation of chromone-3-carboxylic acid, 6-methylchromone-2-carboxylic acid,and 6-methyl-4-chromanone determined by micro-combustion calorimetry

The energies of combustion of chromone-3-carboxylic acid (C3CA), 6-methylchromone-2-carboxylic acid (6MCC), and 6-methyl-4-chromanone (6M4C) were determined using an isoperibolic micro-combustion calorimeter. The calorimeter used in the present work has been assembled, calibrated, and tested in our laboratory with the desired results. Prior to the measurement of the energies of combustion, the purities, heat capacities (C _p), fusion temperatures (T _fus), and enthalpies of melting (Δ_fus H) for each compound were determined by differential scanning calorimetry. The values of the energies of combustion were used to derive standard molar enthalpies of combustion ( \( \Delta _{{\text{c}}} H_{{\text{m}}}^{\circ } \) ) and standard molar enthalpies of formation ( \( \Delta _{{\text{f}}} H_{{\text{m}}}^{\circ } \) ) in the crystalline phase at T = 298.15 K. The values found for the \( \Delta _{{\text{f}}} H_{{\text{m}}}^{\circ } \) of C3CA, 6MCC, and 6M4C were ?(619.5 ± 2.6), ?(656.2 ± 2.2), and ?(308.9 ± 3.0) kJ mol^?1, respectively.     

Computer-aided cooling curve thermal analysis of near eutectic Al–Si–Cu–Fe alloy

The effects of bismuth (Bi), antimony (Sb) and strontium (Sr) additions on the characteristic parameters of the evolution of aluminium dendrites in a near eutectic Al–11.3Si–2Cu–0.4Fe alloy during solidification at different cooling rates (0.6–2 °C) were investigated by computer-aided cooling curve thermal analysis (CA-CCTA). Nucleation temperature ( $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ ) is defined with a new approach based on second derivative cooling curve. The results showed that $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ increased with increasing cooling rate but both the growth temperature ( $ T_{\text{G}}^{{\alpha {\text{ - Al}}}} $ ) and the coherency temperature (T _DCP) decreased. Increase in the temperature difference for dendrite coherency ( $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} - T_{\text{DCP}} $ ) with increasing cooling rate indicate a wider range of temperature before the dendrite can impinge on each other and higher fraction solid ( $ f_{\text{S}}^{\text{DCP}} $ ). Additions of Bi, Sb and Sr to the base alloy produced only a minor effect on $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ . Additions of Bi and Sb resulted in an increase in fraction solid and an increase of 30 % in the value of $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} \, - \,T_{\text{G}}^{{\alpha {\text{ - Al}}}} $ to almost 13 °C.     

Thermal analysis, phase transitions and molecular reorientations in [Sr(OS(CH3)2)6](ClO4)2

Thermal analysis (TG/DTG/QMS), performed for [Sr(OS(CH₃)₂)₆](ClO₄)₂ in a flow of argon and in temperature range of 295–585 K, indicated that the compound is completely stable up to ca. 363 K, and next starts to decompose slowly, and in the temperature at ca. 492 K looses four (CH₃)₂SO molecules per one formula unit. During further heating [Sr(DMSO)₂](ClO₄)₂ melts and simultaneously decomposes with explosion. Differential scanning calorimetry (DSC) measurements performed in the temperature range of 93–370 K for [Sr(DMSO)₆](ClO₄)₂ revealed existence of the following phase transitions: glass ? crystal phase Cr5 at T _g  ≈ 164 K (235 K), phase Cr5 → phase Cr4 at $ T_{\text{c6}}^{\text{h}} $  ≈ 241 K, phase Cr4 → phase Cr3 at $ T_{\text{c5}}^{\text{h}} $  ≈ 255 K, phase Cr3 → phase Cr2 at $ T_{\text{c4}}^{\text{h}} $  ≈ 277 K, phase Cr2 ? phase Cr1 at $ T_{\text{c3}}^{\text{h}} $  ≈ 322 K and $ T_{\text{c3}}^{\text{c}} $  ≈ 314 K, phase Cr1 ? phase Rot2 at $ T_{\text{c2}}^{\text{h}} $  ≈ 327 K and $ T_{\text{c2}}^{\text{c}} $  ≈ 321 K and phase Rot2 ? phase Rot1 at $ T_{\text{c1}}^{\text{h}} $  ≈ 358 K and $ T_{\text{c1}}^{\text{c}} $  ≈ 347 K. Entropy changes values of the phase transitions at $ T_{\text{c1}}^{\text{h}} $ and $ T_{\text{c2}}^{\text{h}} $ (?S ≈ 79 and 24 J mol^?1 K^?1, respectively) indicated that phases Rot1 and Rot2 are substantially orientationally disordered. The solid phases (Cr1–Cr5) are more or less ordered phases (?S ≈ 7, 10, 4 and 3 J mol^?1 K^?1, respectively). Phase transitions in [Sr(DMSO)₆](ClO₄)₂ were also examined by Fourier transform middle infrared spectroscopy (FT-MIR). The characteristic changes in the FT-MIR absorption spectra of the low- and high-temperature phases observed at the phase transition temperatures discovered by DSC allowed us to relate these phase transitions to the changes of the reorientational motions of DMSO ligands and/or to the crystal structure changes.     

Low-temperature heat capacity and thermodynamic parameters of γ-aminobutyric acid

Thermodynamic properties of γ-aminobutyric acid were studied in the temperature interval from 5.7 to 300 K using a vacuum adiabatic calorimeter. The curve C _p (T) in the mentioned temperature interval is S-shaped without any anomalies. Based on the smoothed values of heat capacity, the calorimetric entropy $ S_{m}^{0} (T) - S_{m}^{0} (0) $ and the difference in the enthalpies $ H_{m}^{0} (T) - H_{m}^{0} (0) $ were calculated and tabulated. At the standard temperature 298.15 K, these values are equal to 158.1 ± 0.3 J K^?1 mol^?1 and 23020 ± 50 J mol^?1, respectively. At temperatures from 5 to 10 K, the function C _p (T) was found to obey the Debye law C = AT ³. Contrary to what has been supposed previously, the empirical Parks–Huffman rule for estimating entropy in the homologous series was shown to be not valid for the series glycine–β-alanine–γ-aminobutyric acid.     

Sorption of benzene vapors to flexible metal–organic framework [Zn2(bdc)2(dabco)]

The isotherms of benzene sorption by the metal–organic coordination polymer [Zn₂(bdc)₂(dabco)] were studied within the temperature range 25–90 °C at pressures up to 75 torr. The maximal benzene content in [Zn₂(bdc)₂(dabco)] at room temperature was demonstrated to correspond to the composition [Zn₂(bdc)₂(dabco)]·3.8C₆H₆. It was established that the process of benzene desorption from the substance under investigation occurs in three stages. (1) Evaporation of benzene from the phase of variable composition (phase C) with compression and distortion of the unit cell (the composition of the phase C varies from [Zn₂(bdc)₂(dabco)]·3.8C₆H₆ to [Zn₂(bdc)₂(dabco)]·3.2C₆H₆). (2) The transformation of the phase C into phase P. The phase P has the same unit cell geometry as that for the empty framework. The maximal benzene content is [Zn₂(bdc)₂(dabco)]·1.0C₆H₆. (3) Benzene evaporation from the phase P of variable composition. We studied the temperature dependences of the equilibrium vapor pressure of benzene for the samples with compositions [Zn₂(bdc)₂(dabco)]·3.0(3)C₆H₆ and [Zn₂(bdc)₂(dabco)]·2.0(3)C₆H₆ within the temperature range 290–370 K. The thermodynamic parameters of benzene vaporization were determined for the latter compound ( $ \Updelta {\text{H}}_{{{\text{av}} .}}^{o} = 49\left( 1 \right) \,{\text{kJ }}\left( {{\text{moleC}}_{6} {\text{H}}_{6} } \right)^{ - 1} $ ; $ \Updelta {\text{S}}_{{{\text{av}} .}}^{^\circ } = 100\left( 3 \right)\, {\text{J}}\left( {{\text{moleC}}_{6} {\text{H}}_{6} {\text{K}}} \right)^{ - 1} $ ; $ \Updelta {\text{G}}_{298}^{^\circ } = 19.0\left( 2 \right)\, {\text{kJ}}\left( {{\text{moleC}}_{6} {\text{H}}_{6} } \right)^{ - 1} $ ).     

Volumetric and Viscometric Studies in Binary Liquid Mixtures of 2-Methyl-2-propanol with Some Ketones at Different Temperatures

Densities, ??, and viscosities, ??, of binary mixtures of 2-methyl-2-propanol with acetone (AC), ethyl methyl ketone (EMK) and acetophenone (AP), including those of the pure liquids, were measured over the entire composition range at 298.15, 303.15 and 308.15?K. From these experimental data, the excess molar volume $V_{\mathrm{m}}^{\mathrm{E}}$ , deviation in viscosity ????, partial and apparent molar volumes ( $\overline{V}_{\mathrm{m},1}^{\,\circ }$ , $\overline{V}_{\mathrm{m},2}^{\,\circ }$ , $\overline{V}_{\phi ,1}^{\,\circ}$ and $\overline{V}_{\phi,2}^{\,\circ} $ ), and their excess values ( $\overline{V}_{\mathrm{m},1}^{\,\circ \mathrm{E}}$ , $\overline{V}_{\mathrm{m,2}}^{\,\circ \mathrm{ E}}$ , $\overline {V}_{\phi \mathrm{,1}}^{\,\circ \mathrm{ E}}$ and $\overline{V}_{\phi \mathrm{,2}}^{\,\circ \mathrm{ E}}$ ) of the components at infinite dilution were calculated. The interaction between the component molecules follows the order of AP > AC > EMK.     

Thermochemical Properties of n-Undecylammonium Bromide Monohydrate C11H28BrNO(s)

The crystal structure of n-undecylammonium bromide monohydrate was determined by X-ray crystallography. The crystal system of the compound is monoclinic, and the space group is P2₁/c. Molar enthalpies of dissolution of the compound at different concentrations m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. According to the Pitzer’s electrolyte solution model, the molar enthalpy of dissolution of the compound at infinite dilution ( $ \Updelta_{\text{sol}} H_{\text{m}}^{\infty } $ ) and Pitzer parameters ( $ \beta_{\text{MX}}^{(0)L} $ and $ \beta_{\text{MX}}^{(1)L} $ ) were obtained. Values of the apparent relative molar enthalpies ( $ {}^{\Upphi }L $ ) of the title compound and relative partial molar enthalpies ( $ \bar{L}_{2} $ and $ \bar{L}_{1} $ ) of the solute and the solvent at different concentrations were derived from experimental values of the enthalpies of dissolution.     

Evaluation of surface potential from single crystal electrode potential

The new method of evaluation of the point of zero potential for the metal oxide exhibiting a saddle-like surface potential function Ψ ₀(pH), as obtained by acid base potentiometric titration using Single Crystal Electrode, was proposed. The electrode potential of sapphire single crystal electrode (A crystal plane, $11\bar{2}0$ ) was measured, point of zero potential and surface potentials were evaluated, and the results were analyzed using the Surface Complexation Model. The electroneutrality point corresponding to the point of zero potential was found to be at pH_pzp=7.0. Thermodynamic protonation equilibrium constants for the first and the second step of protonation were obtained as $\lg K_{1}^{\circ} = 12.7$ ; $\lg K_{2}^{\circ} = 1.2$ .     

Characteristics of an oxa-diamide–HNO3 extractant in the supercritical fluid extraction of uranium

An extractant is required in the recovery process to drive the uranium to a stage that enables it to be extracted using the extraction solvent. This paper proposes the composition of a composite extractant, N,N,N′,N′-tetrabutyl-3-oxapentane-diamide–HNO₃ (TBODA–HNO₃) as an extractant, to successfully achieve the objective using supercritical carbon dioxide (sc-CO₂). The composite TBODA–HNO₃ extractant has a chemical composition of TBODA(HNO₃)_1.0(H₂O)_1.5. The U(IV) in the UO₂ containing solid phase is directly oxidized to U(VI) in the form of $ {\rm UO}_{2}^{2 + } $ in sc-CO₂, which contains a CO₂-soluble TBODA–HNO₃ extractant at 200 atm and 50 °C. The resulting $ {\rm UO}_{2}^{2 + } $ /TBODA complex can be consequently extracted using acetone-modified sc-CO₂. The chemical composition of the $ {\rm UO}_{2}^{2 + } $ /TBODA complex, which can be extracted by nonpolar sc-CO₂, is proposed in the form of an ion pair: [UO₂(TBODA)₂]²⁺–2( $ {\rm NO}_{3}^{ - } $ ).     

Volumetric Properties of the Nucleoside Thymidine in Aqueous Solution at T = 298.15 K and p = (10 to 100) MPa

Sound speeds have been measured for aqueous solutions of the nucleoside thymidine at T = 298.15 K and at the pressures p = (10, 20, 40, 60, 80, and 100) MPa. The partial molar volumes at infinite dilution, $ V_{2}^{\text{o}} $ , the partial molar isentropic compressions at infinite dilution, $ K_{S,2}^{\text{o}} $ , and the partial molar isothermal compressions at infinite dilution, $ K_{T,2}^{\text{o}} $ $ \{ K_{T,2}^{\text{o}} = - (\partial V_{2}^{\text{o}} /\partial p)_{T} \} $ , have been derived from the sound speeds at elevated pressures using methods described in our previous work. The $ V_{2}^{\text{o}} $ and $ K_{T,2}^{\text{o}} $ results were rationalized in terms of the likely interactions between thymidine and the aqueous solvent. The $ V_{2}^{\text{o}} $ results were also compared with those calculated using the revised Helgeson–Kirkham–Flowers (HKF) equation of state.     

To determine the half-life for gemcitabine hydrochloride using microcalorimetry

The enthalpies of dissolution of gemcitabine hydrochloride in 0.9 % normal saline (medical) and citric acid solution were measured using a microcalorimeter at 309.65 K under atmospheric pressure. The differential enthalpy $ \left( {\Updelta_{\text{dif}} H_{\text{m}}^{{{\theta}}} } \right) $ and molar enthalpy $ \left( {\Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} } \right) $ of dissolution were determined, respectively. The corresponding kinetic equation described the dissolution were elucidated to be da/dt = 10^?3.84(1 ? a)^0.92 and da/dt = 10^?3.80(1 ? a)^1.21. Besides, the half-life, $ \Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} ,\;\Updelta_{\text{sol}} G_{\text{m}}^{{{\theta}}} $ and $ \Updelta_{\text{sol}} S_{\text{m}}^{{{\theta}}} $ of the dissolution were also obtained. Obviously, it will provide a simple and reliable method for the clinical application of gemcitabine hydrochloride.     

Densities and Volumetric Properties of Butyl Acrylate + 1-Butanol, or +2-Butanol, or +2-Methyl-1-propanol, or +2-Methyl-2-propanol Binary Mixtures at Temperatures from 288.15 to 318.15 K

The densities, ρ, of binary mixtures of butyl acrylate with 1-butanol, 2-butanol, 2-methyl-1-propanol, and 2-methyl-2-propanol, including those of the pure liquids, were measured over the entire composition range at temperatures of (288.15, 293.15, 298.15, 303.15, 308.15, 313.15, and 318.15) K and atmospheric pressure. From the experimental data, the excess molar volume $ V_{\text{m}}^{\text{E}} $ V m E , partial molar volumes $ \overline{V}_{\text{m,1}} $ V ¯ m,1 and $ \overline{V}_{\text{m,2}} $ V ¯ m,2 , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{\text{E}} $ V ¯ m,1 E and $ \overline{V}_{\text{m,2}}^{\text{E}} $ V ¯ m,2 E , were calculated over the whole composition range as were the partial molar volumes $ \overline{V}_{\text{m,1}}^{^\circ } $ V ¯ m,1 ° and $ \overline{V}_{\text{m,2}}^{^\circ } $ V ¯ m,2 ° , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{{^\circ {\text{E}}}} $ V ¯ m,1 ° E and $ \overline{V}_{\text{m,2}}^{{^\circ {\text{E}}}} $ V ¯ m,2 ° E , at infinite dilution,. The $ V_{\text{m}}^{\text{E}} $ V m E values were found to be positive over the whole composition range for all the mixtures and at each temperature studied, indicating the presence of weak (non-specific) interactions between butyl acrylate and alkanol molecules. The deviations in $ V_{\text{m}}^{\text{E}} $ V m E values follow the order: 1-butanol < 2-butanol < 2-methyl-1-propanol < 2-methyl-2-propanol. It is observed that the $ V_{\text{m}}^{\text{E}} $ V m E values depend upon the position of alkyl groups in alkanol molecules and the interactions between butyl acrylate and isomeric butanols decrease with increase in the number of alkyl groups at α-carbon atom in the alkanol molecules.