Densities, Viscosities, Speeds of Sound, FT-IR and 1H-NMR Studies of Binary Mixtures of n-Butyl Acetate with Ethanol, Propan-1-ol, Butan-1-ol and Pentan-1-ol at?298.15, 303.15, 308.15 and 313.15?K

Densities, viscosities and speeds of sound of binary mixtures of ethanol, propan-1-ol, butan-1-ol and pentane-1-ol with n-butyl acetate have been measured over the entire range of composition at temperatures of 298.15, 303.15, 308.15 and 313.15 K and atmospheric pressure. From the experimental densities, viscosities and speeds of sound, the excess molar volumes V ^E, deviations in viscosity ????, and deviations in isentropic compressibility ???? _S have been calculated. The excess molar volumes and deviations in isentropic compressibility are positive for all the binary systems studied over the whole composition, while deviations in viscosities are negative for all of the binary mixtures. The excess molar volumes, deviations in viscosity, and deviations in isentropic compressibility have been fitted to a Redlich?CKister type polynomial equation. FTIR and ¹H-NMR studies of these mixtures are also reported.     

Thermodynamic and transport properties of binary liquid mixtures of cyclohexanol with isomeric chlorotoluenes

Densities (ρ) at different temperatures from 303.15 to 318.15 K, speeds of sound (u) and viscosities (η) at 303.15 K were measured for the binary mixtures of cyclohexanol with 2-chlorotoluene, 3-chlorotoluene and 4-chlorotoluene over the entire range of composition. The excess volumes (V^E) for the mixtures have been computed from the experimental density data. Further, the deviation in isentropic compressibilities (Δκ_s) and deviation in viscosities (Δη) for the binary mixtures have been calculated from the speed of sound and viscosity data, respectively. The V^E values and Δκ_s values were positive and Δη data were negative for all the mixtures over the whole range of composition at the measured temperatures. The calculated excess functions V^E, Δκ_s and Δη were fitted to Redlich–Kister equation. The excess functions have been discussed in terms of molecular interactions between component molecules of the binary mixtures.     

Thermodynamic properties of non-electrolyte solutions

Experimental densities (ρ) and ultrasonic sound velocities (u) for the binary mixtures of toluene, o-chlorotoluene, m-chlorotoluene, and p-chlorotoluene with 1-octanol were measured over the entire composition range at T = (298.15, 303.15, and 308.15) K and at a pressure of 0.1 MPa. Excess volumes (V ^E), isentropic compressibilities $ (\kappa_{\text{s}} ) $ , and excess isentropic compressibilities $ (\kappa_{\text{s}}^{\text{E}} ) $ were calculated using the measured experimental densities and ultrasonic sound velocities of the pure liquids and their mixtures. The experimental data were discussed in terms of intermolecular interactions between component molecules. The measured excess properties were correlated with the Redlich–Kister polynomial equation.     

Thermodynamic study of 2-methyl-tetrahydrofuran with isomeric chlorobutanes

Excess molar volumes, V^E, isentropic compressibility deviations, Δκ_S, and excess molar enthalpies, H^E, for the binary mixtures 2-methyl-tetrahydrofuran with 1-chlorobutane, 2-chlorobutane, 2-methyl-1-chloropropane and 2-methyl-2-chloropropane have been determined at temperatures 298.15 and 313.15 K, excess molar enthalpies were only measured at 298.15 K. We have applied the Prigogine-Flory-Patterson (PFP) theory to these mixtures at 298.15 K.     

Densities,Viscosities and Speeds of Sound of Binary Mixtures of Ethyl Benzoate + Hydrocarbons at (303.15, 308.15 and 313.15) K

Densities, viscosities and speeds of sound of binary mixtures of ethyl benzoate with cyclohexane, n-hexane, heptane and octane have been measured over the entire range of composition at (303.15, 308.15 and 313.15) K and at atmospheric pressure. From these experimental values, excess molar volume (V ^E), deviation in viscosity (Δη) and deviation in isentropic compressibility (ΔK _s) have been calculated. The viscosities of binary mixtures were calculated theoretically from the pure component data by using various empirical and semi-empirical relations and the results compared with the experimental findings.     

Thermodynamic Investigation of Dimethyl Sulfoxide Binary Mixtures at 293.15 and 313.15 K

Densities (ρ), speeds of sound (u), and isentropic compressibilities (k _S) of binary mixtures of dimethyl sulfoxide (DMSO) with water, methanol, ethanol, 1-propanol, 2-propanol, acetone and cyclohexanone have been measured over the entire composition range at 293.15 and 313.15 K. The excess molar volumes (V ^E), the deviations in speed of sound (u ^E) and the deviations in isentropic compressibility (k _S ^E) have been determined. The V ^E, u ^E and k _S ^E values were fitted by the Redlich-Kister polynomial equation and the A _k coefficients as well as the standard deviations (d) between the calculated and experimental values have been derived. The results obtained are discussed from the viewpoint of the existence of interactions between the components of the binary mixtures.     

The variation of viscosity, refractive indices, compressibility, intermolecular free length, and excess molar volume of the acetophenone—ethyl acetate solutions at 303.15–323.15 K

Densities, viscosities, refractive indices and ultrasonic velocities of the binary mixtures of acetophenone with ethyl acetate were measured over the entire mole fractions at 303.15, 313.15, and 323.15 K. From the experimental results, excess molar volumes V ^E, viscosity deviation ??_??, refractive index deviation ??n _D , deviations in isentropic compressibility ???? _s and excess intermolecular free length ??L _f are calculated. The viscosity values were fitted to the models of Krishnan-Laddha and McAllister. The thermophysical properties under study were fit to the Jouyban-Acree model. The excess values were correlated using Redlich-Kister polynomial equation to obtain their coefficients and standard deviations. The data obtained fitted with the values correlated by the corresponding models very well. The results are interpreted in terms of molecular interactions occurring in the solution.     

Topological investigations of binary and ternary mixtures: excess isentropic compressibilities

The speed of sound, U_ij 1,3-dioxolane (D) in binary mixtures (ij) with benzene, cyclohexane, n-hexane or n-heptane and U_ijk for 1,3-dioxolane in ternary mixtures (ijk) with the same hydrocarbons have been measured as a function of composition at 298.15 K. The observed data have been utilised to evaluate excess isentropic compressibility of binary, (κ_s^E)_ij and ternary (κ_s^E)_ijk mixtures using density and speed of sound values of the binary and ternary mixtures. The Moelyn-Huggins concept of interaction between the molecular surfaces of the components of a binary mixture [Polymer 12 (1971) 389] has been extended to evaluate excess isentropic compressibility of the studied binary and ternary mixtures. It has been observed that κ_s^E values predicted by a graph-theoretical approach using connectivities of third degree for binary mixtures compare reasonably well with their corresponding experimental values and κ_s^E for ternary mixtures are of the same sign and order of magnitude.     

Excess parameters for binary mixtures of alkyl benzoates with 2-propanol at different temperatures

Density (ρ), viscosity (η), and speed of sound (U) values for the binary mixture systems of methyl benzoate + 2-propanol and ethyl benzoate + 2-propanol including those of pure liquids were measured over the entire mole fraction range at five different temperatures (303.15, 308.15, 313.15, 318.15, and 323.15) K. From these experimentally determined values, various thermo-acoustic parameters such as excess isentropic compressibility $ \left( {K_{\text{s}}^{\text{E}} } \right) $ , excess molar volume (V ^E) and excess free length $ \left( {L_{\text{f}}^{\text{E}} } \right) $ , excess Gibb’s free energy (ΔG ^*E), and excess enthalpy (H ^E) have been calculated. The excess functions have been fitted to the Redlich–Kister type polynomial equation. The deviations for excess thermo-acoustic parameters have been explained on the basis of the intermolecular interactions present in these binary mixtures. The theoretical values of speed of sound in the mixtures have been evaluated using various theories and have been compared with experimentally determined speed of sound values in order to check the applicability of such theories to the liquid mixture systems under study. Viscosity data have been used to test the applicability of standard viscosity models of Grunberg–Nissan, Hind–Mc Laughlin, Katti–Chaudhary, Heric and Brewer, Frenkel, Tamura and Kurata at various temperatures for the binary liquid systems under study.     

Ultrasonic Studies on Molecular Interactions in Binary Mixtures of N-Methyl Aniline with Methyl Isobutylketone, +3-Pentanone, and +Cycloalkanones at 303.15 K

Densities, ρ, viscosities, η, and ultrasonic sound velocities u of pure methyl isobutylketone, diethylketone, cyclopentanone, cyclohexanone, 2-methyl cyclohexanone and those of their binary mixtures with N-methyl aniline were measured at 303.15 K over the entire composition range. These experimental data have been used to calculate the excess volume (V ^E), deviation in ultrasonic sound velocity (?u), isentropic compressibility (κ _s ), intermolecular free length (L _f), excess intermolecular free length ( $ L_{\text{f}}^{\text{E}} $ L f E ), acoustic impedance (Z), excess isentropic compressibility ( $ \kappa_S^{\text{E}} $ κ S E ), deviation in viscosity (?η) and excess Gibbs energy of activation of viscous flow (G ^*E). The viscosity data have been correlated using three equations proposed by Grunberg and Nissan, Katti and Chaudhri, and Hind et al. The excess/deviations have been fitted by Redlich–Kister equation and the results are discussed in terms of molecular interactions present in these mixtures.     

Thermodynamics of (1-alkanol + linear monoether) systems

Densities, ρ, and speeds of sound, u, of systems formed by 1-heptanol, or 1-octanol, or 1-decanol and dibutylether have been measured at a temperature of (293.15, 298.15, and 303.15) K and atmospheric pressure using a vibrating tube densimeter and sound analyser Anton Paar model DSA-5000. The ρ and u values were used to calculate excess molar volumes, V^E, and deviations from the ideal behaviour of the thermal expansion coefficient, Δα_p and of the isentropic compressibilities, Δκ_S. The available database on molar excess enthalpies, H^E, and V^E for (1-alkanol + linear monoether) systems was used to investigate interactional and structural effects in such mixtures. The enthalpy of the OH?O bonds is lower for methanol solutions, and for the remainder systems, it is practically independent of the mixture compounds. The V^E variation with the chain length of the 1-alkanol points out the existence of structural effects for systems including longer 1-alkanols. The ERAS model is applied to the studied mixtures. ERAS represents quite accurately H^E and V^E data using parameters which consistently depend on the molecular structure.     

Excess properties and spectroscopic studies of binary system 1,4-butanediol + water at T = (293.15, 298.15, 303.15, 308.15, 313.15 and 318.15) K

Density and dynamic viscosity data were measured over the whole concentration range for the binary system 1,4-butanediol (1) + water (2) at T = (293.15, 298.15, 303.15, 308.15, 313.15, and 318.15) K as a function of composition under atmospheric pressure. Based on density and dynamic viscosity data, excess molar density (ρ^E), dynamic viscosity deviation (Δν) and excess molar volume (V_m^E) were calculated. From the dynamic viscosity data, excess Gibbs energies (ΔG*^E), Gibbs free energy of activation of viscous flow (ΔG*), enthalpy of activation for viscous flow (ΔH*) and entropy of activation for viscous flow (ΔS*) were also calculated. The ρ^E, V_m^E, Δν and ΔG*^E values were correlated by a Redlich?Kister-type function to obtain the coefficients and to estimate the standard deviations between the experimental and calculated quantities. Based on FTIR and UV spectral results, the intermolecular interaction of 1,4-butanediol with H₂O was discussed.     

Study of densities,viscosities, and speeds of sound of binary liquid mixtures of butan-1-ol with n-alkanes (C6, C8, and C10) at T = (298.15, 303.15, and 308.15) K

The densities (ρ) and speeds of sound (u) have been measured over the whole composition range for (butan-1-ol with hexane, or octane, or decane) at T = (298.15, 303.15, and 308.15) K and atmospheric pressure along with the properties of the pure components. Viscosities (η) of these binary mixtures have also been measured over the entire composition range at T = 298.15 K. Experimental values of density, viscosity and speed of sound have been used to evaluate excess properties viz. excess molar volumes (V^E), deviation in viscosity (Δη), deviation in speeds of sound (Δu), deviation in isentropic compressibility (Δκ_s) and excess Gibbs free energy of activation of viscous flow (ΔG^1E). The excess properties have been correlated using the Redlich–Kister polynomial equation. The sign and magnitude of these excess properties have been used to interpret the results in terms of intermolecular interactions and structural effects. The viscosity data have also been correlated by Grunberg and Nissan, Tamura–Kurata, and Hind correlation equations.     

Excess thermo dynamical parameters of binary mixtures of toluene and mesitylene with anisaldehyde using ultrasonic technique at different temperatures

The densities, viscosities, and ultrasonic velocities of the binary mixture of toluene and mesitylene with anisaldehyde have been measured at 303.15, 308.15, 313.15, and 318.15 K for the entire range of mole fraction of anisaldehyde. From the data the excess adiabatic compressibility (β ^E), excess free volume (V _f^E), excess internal pressure (π ^E), excess enthalpy (H ^E), and excess Gibb’s free energy of activation of flow (G* ^E) for the binary mixture over the additive values were calculated. In light of these parameters molecular interactions involved between the component liquids have been discussed.     

Excess thermodynamic parameters of binary mixtures of methanol,ethanol, 1-propanol,and 2-butanol + chloroform at (288.15–323.15 K) and comparison with the Flory theory

In this work we used the experimental result for calculating the thermal expansion coefficients α, and their excess values α ^E , and isothermal coefficient of pressure excess molar enthalpy and comparison the obtain results with Flory theory of liquid mixtures for the binary mixtures {methanol, ethanol, 1-propanol and 2-butanol-chloroform} at 288.15, 293.15, 298.15, 303.15, 308.15, 313.15, 318.15, and 323.15 K. The excess thermal expansion coefficients α ^E and the isothermal coefficient of pressure excess molar enthalpy ((∂H _m^E/∂P) _T,x for binary mixtures of {methanol and ethanol + chloroform} are S-shaped and for binary mixtures of {1-propanol and 2-butanol + chloroform} are positive over the mole fraction. The isothermal coefficient of pressure excess molar enthalpy (∂H _m^E/∂P) _T,x , are negative over the mole fraction range for binary mixture of {1-propanol and 2-butanol + chloroform}. The calculated values by using the Flory theory of liquid mixtures show a good agreement between the theory and experimental.     

Influence of the alkyl group on thermophysical properties of carboxylic acids in 1-butyl-3-methylimidazolium thiocyanate ionic liquid at various temperatures

In the present study, influence of the alkyl group and temperature on the interactions between the carboxylic acid and ionic liquid (IL) mixtures were discussed in term of density and sound velocity measurements. The IL used in this study was 1-butyl-3-methylimidazolium thiocyanate ([BMIM]⁺[SCN]⁻). The density (ρ), and sound velocity (u), of the IL, acetic acid, propionic acid, and their corresponding binary systems {[BMIM]⁺[SCN]⁻ (x₁) + acetic or propionic acid (x₂)} have been measured at T = (293.15, 298.15, 303.15, 308.15 and 313.15) K and at p = 0.1 MPa. The excess molar volumes, $V_{\text{m}}^{\text{E}}$, isentropic compressibility, κ_s, and deviation in isentropic compressibility, Δκ_s, were calculated using experimental density and sound velocity data, respectively. The Redlich–Kister polynomial equation was used to fit the excess/deviation properties. These results are useful for describing the intermolecular interactions that exist between the IL and carboxylic acid mixtures.     

Excess Acoustical and Volumetric Properties and Theoretical Estimation of Ultrasonic Velocities in Binary Liquid Mixtures of 2-Chloroaniline with Acrylic Esters at 308.15 K

The ultrasonic velocities (u) and densities (??) for three binary mixture systems of 2-chloroaniline (CA) with ethyl acrylate (EA), butyl acrylate (BA), and 2-ethylhexyl acrylate (EHA) were measured over the entire mole fraction range at the temperature 308.15?K, including those of pure liquids. From these data, the deviations in ultrasonic velocity (??u), the excess molar volumes ( $V_{\mathrm{m}}^{\mathrm{E}}$ ), deviations in excess molar volume ( $\delta V_{\mathrm{m}}^{\mathrm{E}}$ ), deviations in isentropic compressibility (??k _S), excess intermolecular free lengths ( $L_{\mathrm{f}}^{\mathrm{E}}$ ), and excess acoustic impedances (Z ^E) have been calculated. The variations of these properties with solution composition are discussed in terms of molecular interactions among unlike molecules of the mixtures. The excess and deviation functions have been fitted to Redlich-Kister type polynomials and the corresponding standard deviations ??(Y ^E) have been calculated. The deviations and excess values were plotted against the mole fraction of CA over the whole composition range. The $V_{\mathrm{m}}^{\mathrm{E}}$ and ??k _S values are negative in the EA + CA and BA + CA systems but are positive in the EHA + CA system, which indicates the presence of specific interactions between unlike molecules. Further, theoretical values of the sound velocity in these mixtures have been evaluated using various theories and have been compared with experimental sound velocities to verify the applicability of such theories to the investigated systems. Two types of polynomial equations, f(x) and g(x), have been fitted to experimental values of ultrasonic velocities. The sound velocities obtained by these polynomials have extremely small deviations from the experimental values.     

Excess molar volumes and ultrasonic studies of dimethylsulphoxide with ketones at T = 303.15 K

Excess molar volumes (V^E) and ultrasonic sound velocities at T = 303.15 K and ambient pressure have been measured as a function of composition for the binary liquid mixtures of dimethylsulphoxide (DMSO) with ketones. The ketones studied in the present investigation include ethyl methyl ketone (EMK), diethylketone (DEK), methyl propyl ketone (MPK), methyl isobutyl ketone (MIBK), and cyclohexanone (CH). The V^E values were measured using a dilatometer and were positive over the entire mole fraction range for all systems except in the binary system DMSO with EMK where the V^E exhibits an inversion in sign. The experimental V^E values have been correlated using Redlich–Kister and Hwang et al. equations. The ultrasonic sound velocities for the above systems have been measured with a single crystal interferometer at a frequency of 3 MHz. The sound velocity (u) data have been used to calculate isentropic compressibility (K_s) and deviation in isentropic compressibility (ΔK_s) over the entire range of volume fraction. The sound velocity data have been predicted in terms of free length theory (FLT), collision factor theory (CFT), and Nomoto relation. The results reveal that all the theories gave a satisfactory estimate of the sound velocity. The deviations in values of isentropic compressibility (ΔK_s) were negative over the entire range of volume fraction in all the binary liquid mixtures. The results are interpreted with respect to possible molecular interactions between components.     

Densities,surface tensions,and derived surface thermodynamics properties of (trimethylbenzene + propyl acetate,or butyl acetate) from T = 298.15 K to 313.15 K

Densities (ρ) for binary systems of (1,2,4-trimethylbenzene, or 1,3,5-trimethylbenzene + propyl acetate, or butyl acetate) were determined at four temperatures (298.15, 303.15, 308.15, and 313.15) K over the full mole fraction range. The excess molar volumes (V^E) calculated from the density data show that the deviations from ideal behaviour in the systems (all being positive, excepting 1,2,4-trimethylbenzene + butyl acetate system) become more positive with the temperature increasing. Surface tensions (σ) of these binary systems were measured at the same temperatures (298.15, 303.15, 308.15, and 313.15) K by the pendant drop method, the surface tension deviations (δσ) for all system are negative, and decrease with the temperature increasing. The V^E and δσ are fitted to the Redlich–Kister polynomial equation. Surface tensions were also used to estimate surface entropy (S_σ) and surface enthalpy (H_σ).     

Density,viscosity and refractive index for ethyl tert -butyl ether + 2-butoxyethanol mixtures

Densities (ρ) at 293.15, 298.15, 303.15, 308.15, and 313.15 K, viscosities (η) at 293.15, 298.15, and 303.15 K and refractive indexes (n) at 298.15 K of binary mixtures of ethyl tert-butyl ether (1) + 2-butoxyethanol (2), are reported. The excess molar volumes (V ^E) and the viscosities, and refractive index deviations (Δln η and Δn) were calculated from these experimental data. The results are discussed in terms of intermolecular interactions.