Thermal kinetics and morphological investigation of alkaline treated rice husk biomass

Agro waste bio mass are creating challenges for environment in term of air pollution due to improper disposal. Rice milling is the process in which rice husk is produced as by-product. The agro-waste rice husk has tremendous potential to be used either in its raw form or in ash form. The inherent component of this waste cellulose provides enhanced properties in a reinforced composite when used as filler. Rice husk is the hard outer layer and covering rice seed, which makes reinforcement challenging in its original form. Fiber surface treatment significantly improves adhesion with matrix and various thermo chemical properties of filler as well as of composites. NaOH treatment is cost-effective and it ensures the adhesion with matrix by removal of hemicellulose and lignin. The chemical treatment of agro-waste (rice husk) is performed with 5% alkali solutions of NaOH in water. Results are compared with the properties of untreated rice husk for thermal and morphological characterizations. In the present work, we are trying to quantify the impact of chemical treatment on rice husk thermal decomposition and its kinetics. Thermogravimetric analysis and kinetics study of thermal degradation, provide key input towards pyrolysis pattern of rice husk, while FTIR and SEM analysis provide the prospects of this bio filler using a reinforcing agent to develop green composite and productive disposal. The FTIR data helps to find the possibilities of blending different bio fillers and natural fibers to find suitable reinforcing substances. The average activation energy of treated fiber is noted as 137.95 by KAS method and 108.08 by FWO method as compared to 55.56 by KAS method & 54.26 by FWO method for untreated rice husk.     

Pyrolysis kinetics of elephant grass pretreated biomasses

The Elephant Grass (Pennisetum purpureum Schum) was pretreated by two independent processes, through washing with hot water (W-EG) and acid solution (AW-EG) to improve its energy properties to apply it in a thermochemical process conversion into fuel. The biomasses were analyzed by proximate and ultimate analysis; and the pyrolysis kinetics, before and after pretreatments, were evaluated by the apparent activation energy (E _a) for decomposition in the temperature range of greater volatile matter through the Model-free kinetics using thermogravimetric analysis data. The kinetics of the microcrystalline cellulose Avicel PH-101 was performed to evaluate the E _a result of pure cellulose. The pretreatments were efficient in increasing the volatile matter and heating value, decreasing moisture and ash content, and improving its energetic power to the application in fast pyrolysis process for bio-oil production. The TG results have shown that the reduction in ash content facilitates the pyrolysis process, increasing the volatile matter and decreasing the apparent activation energy required to biomasses degradation, due to less diffusional resistances to heat and mass transfer of W-EG and AW-EG. The Avicel PH-101 showed the highest value of apparent activated energy (E _a = 276.2 kJ mol^?1) which could be explained by its crystallinity, suggesting that crystalline cellulose regions are less accessible to heat diffusion than amorphous regions, requiring more energy to its degradation.     

生物质组分及温度对闪速热解挥发分的影响

生物质是一种可再生、污染小的自然资源，它可以直接燃烧产生热能，也可以转化为气体、液体燃料或化工原料。生物质热转化技术近年来受到国内外学者的广泛重视。而热转化过程中，热解是第一步，与生物质组分、热解温度、滞留时间等因素有关。热重仪（TGA）是一种研究热解机理常用的方法，它适用于慢速程序升温的热解研究。研究发现，热解条件及生物质种类对反应表观活化能与表观频率因子等动力学参数有很大影响。层流炉闪速加热设备，已经用于煤的热解研究。本文利用自己设计的以热等离子体为热源的层流炉系统，对椰子壳、棉花秆和稻壳粉末进行了闪速热解实验研究及模型理论分析，探讨了生物质化学组分、热解温度和滞留时间对挥发分的影响，为生物质闪速热解提供了一定的基础数据。     

Heat/mass transfer characteristics and nonisothermal drying kinetics at the first stage of biomass pyrolysis

Biomass pyrolysis can be divided into three stages: moisture evaporation, main devolatilization, and continuous slight devolatilization. This present study focuses on the heat and mass transfer characteristics of biomass in the first pyrolysis stage, which takes place in the range of room temperature to 150?°C. Thermalgravimetric experiments of rice husk and cotton stalk were performed by a synchronic thermal analyzer (TG/DSC). Four nonisothermal drying models were obtained from common isothermal drying models in order to describe the drying behavior of agricultural products. The moisture content of biomass decreased rapidly as the temperature increased and an apparent water loss peak was observed in the temperature range of 65?C75?°C. DSC could be regarded as the superposition of three parts: heat flow from moisture evaporation, heat flow from the heat capacity of unevaporated moisture, and heat flow from the heat capacity of dry base biomass. The heat requirements for the dehydration of 1?kg rice husk and cotton stalk were 251 and 269?kJ, respectively. Nonisothermal drying models were evaluated based on the coefficient of determination (R ²) and reduced chi-square (??²). Page model was found to be the best for describing the nonisothermal drying kinetics. The values of activation energy were determined to be 9.2 and 15.1?kJ/mol for rice husk and cotton stalk, respectively.     

Thermogravimetric analysis of composites obtained from sintering of rice husk-scrap tire mixtures

Summary The disposal of used automotive tires has caused many environmental and economical problems to most countries. We propose the use of rice husk as filler for increasing the value of recycled tire rubber. Thermal degradation of both components and their sintering mixtures is presented in this paper. Thermal decomposition of rice husk occurs in various steps in the temperature range between 150 and 550°C. This complex process is the result of the overlapping of thermal decomposition of the three major constituents common in all lignocellulosic materials, i.e., hemicellulose, lignin and cellulose. Hemicellulose is degraded at temperatures between 150 and 350°C, cellulose from 275 to 380°C and lignin from 250 to 550°C. The degradation process of major constituents of scrap tires or their composites is observed at temperatures between 150 and 550°C. For composites, the addition of rice husk (maximum 25%) produces an increase in the mass loss rate. This effect is higher as the amount of rice husk increases. However, the degradation initial temperature of elastomeric matrix is not affected with addition of rice husk. Apparent kinetic parameters were also studied by the isoconversional Friedman method. We observed that the addition of rice husk produces a decrease in apparent activation energy for low conversions (up to 0.6). For higher conversions this decrease was not so clearly observed.     

Characterization of rice husks and the products of its thermal degradation in air or nitrogen atmosphere

Rice husk is a by-product of rice milling process and are a major waste product of the agricultural industry. They have now become a great source as a raw biomass material for manufacturing value-added silicon composite products, including silicon carbide, silicon nitride, silicon tetrachloride, pure silicon, zeolite, fillers of rubber and plastic composites, adsorbent and support of catalysts. The bulk and true densities of raw rice husk with different moisture and sizes were determined. The rice husk was subjected to pyrolysis in fluidized-bed reactor in air or nitrogen atmosphere. The products obtained were characterized by thermogravimetric and X-ray powder analysis, IR-spectroscopy, scanning electron microscopy and nitrogen adsorption at 77 K. The specific surface area of the products is comparable with this of γ-Al₂O₃. The kinetics of H₂SeO₃ adsorption out of aqueous solutions at 298 K was studied. The adsorption capacity of white rice husks ash was found to be higher than that of black rice husk ash and the adsorption kinetics obeyed the second order kinetic equation.     

Energy potential and thermogravimetric study of pyrolysis kinetics of biomass wastes

The use of agricultural wastes for energy conversion has been widely studied as renewable and carbon neutral energy sources. This paper aims to evaluate the energetic potential of six agricultural wastes—sugarcane bagasse, bean pods, corn stover, pineapple crown leaves, white cotton and natural coloured cotton stalks, through their characterization and pyrolysis kinetic study. The energetic potential of biomasses was evaluated by ultimate and proximate analysis, higher heating value (HHV), apparent density, and kinetic parameters of conversion and apparent activation energy (E_a) determined by Model-Free kinetics though thermogravimetric analysis data. The results indicate energetic density for dry basis biomasses, such as moisture content less than 7%, volatiles higher than 77% and moderate ash content. The HHVs were higher for the biomass with low O:C ratio. The E_a values increased with increasing O:C ratio and were also influenced by the biomass ash content. Among the studied biomasses, PCL are less explored for energy application, although the results confirm its potential for application in thermochemical processes such as pyrolysis or combustion.

     

Kinetic analysis of co-pyrolysis of cellulose and polypropylene

The present research work focuses on understanding the kinetics and mechanism of co-pyrolysis of cellulose, a major constituent of biomass, and polypropylene (PP) that is abundantly present in waste plastics. Co-pyrolysis of cellulose and PP of different compositions, viz., 100:0, 80:20, 60:40, 40:60, 20:80, and 0:100 (mass%/mass%), was carried out in a thermogravimetric analyzer at various heating rates from 5 to 180 K min^?1. The kinetics of slow to medium heating rate pyrolysis was analyzed using first Kissinger and Kissinger–Akahira–Sunose techniques. Cellulose and PP decomposition occurred in two distinct temperature regimes, viz., 575–650 and 675–775 K, respectively. However, apparent activation energies of thermal decomposition of the mixtures clearly indicated the presence of interaction between cellulose and PP. The presence of cellulose in the mixture decreased the apparent activation energy of PP decomposition from 210 to 120 kJ mol^?1, while the presence of PP did not affect the apparent activation energy of cellulose decomposition (E _a = 158 ± 3 kJ mol^?1). A significant decrease in apparent activation energy was observed in the conversion regime corresponding to the completion of cellulose pyrolysis and beginning of PP pyrolysis. Differential scanning calorimetry data clearly showed the shift of exothermic char formation to higher temperatures with PP incorporation in the mixture. The presence of PP also resulted in reduction of final char content. Based on the above analyses, a new interaction step that involves a bimolecular reaction of activated PP with volatiles from cellulose pyrolysis to form interaction products and char is proposed, and the rate limiting steps for char formation are clearly identified.     

Study of pyrolysis kinetic of green corn husk

In this paper, it was suggested the use of green corn husk, which is a biomass from agro-industry, as an alternative source of energy through its pyrolysis. Green corn husk characterization was done through immediate and elemental analysis of its components: cellulose, hemicelluloses, and lignin. It was also measured its higher calorific value. The pyrolysis study of green corn husk was done by the isoconversion and the Master plots method. Thermogravimetric plots were obtained at heating rates of 5, 10, 15, and 20 °C min^?1. The pyrolysis kinetics parameters were studied through the Flynn–Wall–Ozawa (FWO), Kissinger, and Friedman models. The Master plots method was used to determine the pyrolysis reaction order. The results of the reaction energy activation were found to be in the range 105.21–157.46 kJ mol^?1 by the FWO method, 150.50 kJ mol^?1 by the Kissinger method, and ranged 120.66–163.81 kJ mol^?1 by the Friedman method. The Master plots method showed a three-way-transport diffusional kinetics for the biomass de-volatilization process. The higher calorific value found for green corn husk was 16.14 MJ kg^?1. The simulation showed correlation between the experimental data and the proposed model for conversion values up to 0.8.

     

Effect of thermo-lime and hot-water pretreatment on the thermal-decomposition characteristics and structure of Spartina alterniflora

The thermal-decomposition characteristics and kinetics of Spartina alterniflora (smooth cordgrass; SC) pretreated with thermo-lime and hot water were investigated by thermogravimetric analysis. Results showed that pretreatment changed the thermal-decomposition behavior of pretreated biomass, as shown in the change of the volatile-matter yield, the thermal-decomposition temperature for a given conversion and the mass-loss rate, because of the breakage of lignocellulosic structure. The activation energy of SC ranged from 40.8 to 55.8 kJ mol^?1 for conversion ratios between 0.15 and 0.8. Pretreatment increased the activation energy of thermal-decomposition reaction, indicating the increment of the thermal stability of biomass. Compared with thermo-lime pretreatment, hot-water pretreatment increased the volatile-matter yield, activation energy, and mass-loss rate of the sample. Structure changes were further investigated by X-ray and Fourier-transform infrared (FTIR) spectroscopy analysis to determine the effect of pretreatment on thermal decomposition. FTIR analyses revealed the depolymerization of lignocellulosic structure and the disruption of carboxyl carbons attached to the lignin side chain. X-ray and FTIR results also showed that thermo-lime and hot-water pretreatment broke the crystalline structure of cellulose by disrupting hydrogen bonding and removing amorphous matter. Compared with hot water, thermo-lime pretreatment resulted in many modifications of lignocellulosic structure and composition. Furthermore, structure breakage and composition removal changed thermal-decomposition characteristics of pretreated samples.     

Thermogravimetric analyses revealed the bioenergy potential of <Emphasis Type="Italic">Eulaliopsis binata</Emphasis>

The present study was focused on the thermal degradation of Eulaliopsis binata biomass produced on a salt-affected soil without any fertilizer or pesticide applications. The plant biomass was subjected to thermal degradation experiments at three heating rates, 10, 30 and 50 K min^?1. The kinetic analyses were performed through isoconversional models of Kissinger–Akahira–Sunose and Flynn–Wall–Ozawa, followed by the calculation of thermodynamic parameters of activation. The high heating value was calculated as 15.10 MJ mol^?1. The activation energy values of the grass were shown to be ranging from 118 through 240 kJ mol^?1. Energy difference of enthalpies of activation between the reagent and the activated complex was in accordance with activation energies. Pre-exponential factors indicated the reaction to follow first-order kinetics. Gibbs free energy for the grass was measured to be ranging from 171 to 174 kJ mol^?1. Our data have shown that E. binata biomass offers remarkable potential as a low-cost biomass for bioenergy.     

Effect of removing silica in rice husk for the preparation of activated carbon for supercapacitor applications

The significant influence of silica inside rice husk in the preparation and electrochemical performances of activated carbon are investigated. The removing of silica results in high mesoporous ratio and good rate capability.     

玉米秸热解动力学研究

生物质能具有低硫和二氧化碳零排放的特点,其在能源结构中的地位越来越重要。作为一种高效生物质能转化途径,热化学转化可获得气、液和固态多种能源产物。其中,热解是热化学转化中最为基本的过程,是气化、液化及燃烧过程的初始和伴生反应,对热解的分析有助于热化学转化过程控制及高效转化工艺的开发。热解动力学是表征热解过程中反应过程参数对原料转化率影响的重要手段,通过动力学分析可深入了解反应过程和机理,预测反应速率及难易程度,为生物质热化学转化工艺的研究开发提供重要的基础数据。国外对纤维素热解动力学已进行了一些研究,但生物质作为纤维素、半纤维素、木质素等的复杂聚合物,其热解行为与单纯纤维素差别较大。因此本文的热解研究集中在玉米秸这种常见的软质秸秆类生物质原料。     

Thermal analysis of the rice and by-products

The thermogravimetry (TG) is a technique used in the quality control of foods. In this work the moisture and ash contents in the rice and by-products (bran and husk), the thermal stability and the gelatinization process by conventional, thermogravimetric and calorimetric methods were studied. The moisture and ash contents obtained by TG and conventional methods did not present significant differences. The rice presented higher starch content, while the bran presented higher protein content. The thermogravimetric data presented the following thermal stability order: rice>bran>husk. The calorimetric curves indicated the gelatinization of the starch. The kinetic parameters were compatible. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermogravimetric analysis of rice husk flour filled thermoplastic polymer composites

The thermal degradation and thermal stability of rice husk flour (RHF) filled polypropylene (PP) and high-density polyethylene (HDPE) composites in a nitrogen atmosphere were studied using thermogravimetric analysis. The thermal stability of pure PP and HDPE was found to be higher than that of wood flour (WF) and RHF. As the content of RHF increased, the thermal stability of the composites decreased and the ash content increased. The activation energy of the RHF filled PP composites increased slowly in the initial stage until α=0.3 (30% of thermal degradation region) and thereafter remained almost constant, whereas that of the RHF filled HDPE composites decreased at between 30 and 40 mass% of RHF content. The activation energy of the composites was found to depend on the dispersion and interfacial adhesion of RHF in the PP and HDPE matrix polymers. This revised version was published online in July 2006 with corrections to the Cover Date.     

灰化温度对生物质灰特征的影响

针对我国在进行生物质灰分分析时采用煤质分析标准的现状，对八种生物质分别在高温(GB/T212－2001中规定的温度，820 ℃)和低温(ASTM/E 870-82(1998修正)中规定的温度，600 ℃)下进行了灰化，测定了灰分量，并利用EDX-SEM对灰成分和形态进行了分析。结果显示，灰化温度对灰分量、灰成分和灰形态均有明显的影响，因此在生物质灰分性质分析时宜采用低温灰化的方法。     

A review on recent advances in the comprehensive application of rice husk ash

Research on Chemical Intermediates - Rice husk ash, which is rich in non-crystalline silica, is a by-product material obtained from the combustion of rice husk. Because rice husk ash is available...     

The pyrolysis process of wood biomass samples under isothermal experimental conditions—energy density considerations: application of the distributed apparent activation energy model with a mixture of distribution functions

This work deals with the isothermal pyrolysis of Pine and Beech wood samples and kinetic studies, using the thermo-analytical technique, at five different operating temperatures. Pyrolysis processes were investigated by using the distributed apparent activation energy model, which involves the complex mixture of different continuous distribution functions. It was found that decomposition processes of wood pseudo-components take place in different conversion areas during entire pyrolyses, whereby these areas, as well as the changes in apparent activation energy (E _a) values, are not the same for softwood and hardwood samples. Bulk density (Bden) and energy density (ED) considerations have shown that both biomass samples suffer from low Bden and ED values. It was concluded that pyrolysis can be used as a means of decreasing transportation costs of wood biomass materials, thus increasing energy density. The “pseudo” kinetic compensation effect was identified, which arises from kinetic model variation and wood species variation. In the current extensive study, it was concluded that primary pyrolysis refers to decomposition reactions of any of three major constituents of the considered wood samples. Also, it was established that primary reactions may proceed in parallel with simultaneous decomposition of lignin, hemicelluloses and cellulose in the different regions of wood samples, depending on the operating temperature. It was established that endothermic effects dominate, which are characterized with devolatilization and formation of volatile products. It has been suggested that the endothermic behavior that arises from pyrolyses of considered samples may indicate the endothermic depolymerization sequence of cellulose structures.     

Understanding the Mechanocatalytic Conversion of Biomass: A Low‐Energy One‐Step Reaction Mechanism by Applying Mechanical Force

On the way to establishing biomass as a renewable and environmentally friendly source to cover the ever‐increasing global demand on energy and chemicals, one great challenge is the efficient depolymerization of cellulose. Enhanced conversion rates have been discovered in ball‐milling experiments, thus opening a mechanocatalytic approach. However, an understanding of the impact of mechanical forces on the acid‐catalyzed cleavage of glycosidic bonds at the molecular level is still missing. Herein, we contribute such fundamental insight based on atomistic modeling. Mechanically stressing the macromolecular backbone radically changes the depolymerization pathway from a complex high‐barrier reaction upon thermal activation to a low‐energy single‐step mechanocatalytic process. In addition to revealing a regioselective increase in basicity under a mechanical force, our results provide molecular‐level explanations of the experimental findings and might therefore guide rational ways to improve such mechanocatalytic processes.     

Kinetic Study of the Thermal Decompositions of Biopolymers Extracted From Various Plants

A knowledge of the kinetics of decomposition of biopolymers on heating is important mainly in two domains: forest fires and the incineration of biomass for the production of electric energy. For the study by thermogravimetry of biopolymers (cellulose, holocellulose and lignin), samples of several Mediterranean plants were used.The cellulose decomposition fits well with apparent first-order kinetics. The activation energy in an air flow is about 185 kJ mol^–1. It ranges between 149 and 200 kJ mol^–1 for holocellulose (cellulose+hemicellulose) in an air flow. Under nitrogen, the values are higher. Differences in the chemical structures of the hemicelluloses (pentosan and hexosan) may explain these variations. The lignins also display various chemical structures. We observed large differences in the thermal decompositions of the various samples. The decomposition rate is increased in a nitrogen flow containing 6% oxygen. We observed a correlation between the maximum decomposition rate and the heating rate. This variation presents a particular form (linear with two slopes). Only the second part seems to be interesting.This revised version was published online in November 2005 with corrections to the Cover Date.