Temperature-controlled combustion and kinetics of different rank coal samples

Differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG) has been used to obtain information on the temperature-controlled combustion characteristics of seventeen coals of different origin from Thrace basin of Turkey. Experiments were performed in air atmosphere up to 600°C at a heating rate of 10°C min^-1. The DSC/TG curves clearly demonstrate distinct transitional stages in the entire coal samples studied. Reaction intervals, peak and burn-out temperatures of the coal samples are also determined. Two different kinetic methods known as, Arrhenius and Coats-Redfern, were used to analyze the kinetic data and the results are discussed.     

The kinetic deuterium isotope effect in the thermal dehydration of boric acid

The kinetic deuterium isotope effect in the thermal dehydration process from H₃BO₃ to HBO₂(III) was determined using simultaneous TG and DSC. The rate constant ratio of H₃BO₃ to D₃BO₃ obtained by the analysis of isothermal TG and DSC curves was found to be smaller than unity. Both activation energy, E, and frequency factor, A, for the dehydration of H₃BO₃ proved to be larger than those of D₃BO₃, using non-isothermal TG and DSC. The origin of the deuterium kinetic isotope effect in the thermal dehydration of boric acid is also briefly discussed.     

Non-isothermal kinetic and thermodynamic study for the dehydration of copper(II) chloride dihydrate and nickel chloride hexahydrate

Non-isothermal dehydration of copper chloride dihydrate and nickel chloride hexahydrate were studied by using TG, DTG, DTA and DSC measurements. The copper chloride salt loses its two water molecules in one step while nickel chloride salt dehydrates in three consecutive steps. The first two steps involve the loss of 4 water molecules in two overlapped steps while the third step involves the dehydration of the dihydrate salt to give the anhydrous NiCl₂. Activation energies (ΔE) and the frequency factor (A) were calculated from DTG and DTA results. We have also calculated the different thermodynamic parameters, e.g. enthalpy change (ΔH), heat capacity (C _p) and the entropy change (ΔS) from DSC measurements for both reactants. The isothermal rehydration of the completely dehydrated salts was studied in air and under saturated vapour pressure of water. Anhydrous nickel chloride was found to rehydrate in three consecutive steps while the copper salt rehydrated in one step.     

Dehydration studies of Co(II), Cu(II) and Zn(II) methanesulfonates

The dehydration process of Co(II), Cu(II) and Zn(II) methanesulfonates was studied by thermogravimetry/derivative thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC) techniques in dynamic N₂ atmosphere. The TG/DTG curves show that all of them contain four crystallization water molecules, which are lost in two steps. The peak temperature and dehydration enthalpies ΔH were measured from DSC curves for each compound. The effect of procedural variables on the TG and DSC curves was investigated. In this work, the procedural variables included heating rate, Al pan state (unsealed and sealed) and sample mass.     

Thermal degradation behavior of radiation synthesized polydiallyldimethylammonium chloride

Thermogravimetric analysis (TGA) and differential scanning calorimetric (DSC) studies were carried out on gamma radiation synthesized polydiallyldimethylammonium chloride (PDADMAC). The polymer was found to undergo thermal degradation in two stages. The first stage showed a weight loss of 33% and the second stage showed a weight loss of 67%. The DSC thermogram shows two endothermic peaks corresponding to the two stages in the TG thermogram and the experimental enthalpy change associated with the first and second stages were 650 J g⁻¹ and 129.5 J g⁻¹, respectively. The nth-order kinetic parameters (order of the reaction, activation energy and the pre-exponential factor) were determined from a single dynamic DSC or thermogravimetric (TG) thermogram by the method of least square. Theoretical TG/differential thermogravimetric (DTG) and DSC thermograms derived from the calculated kinetic parameters were in good agreement with the experimental ones at the heating rate employed. However, the kinetic parameters determined using TG and DSC were different. This leads to the conclusion that the degradation mechanism could be complicated and may consists of a number of parallel or consecutive reactions. The glass transition temperature (T_g) of the polymer was found to be around 150 °C depending on the test method employed.     

Geological and thermal characterization of Eskişehir region oil shales

In this study, geological consideration and thermal characterization of oil shale samples were studied. Geological considerations of oil shale samples were studied using Rock–Eval analysis and it was observed that the kerogen type of all oil shale samples were in the majority of Type-I and II. Thermal characteristics and kinetics analysis of oil shale samples were studied by non isothermal differential scanning calorimeter (DSC) and thermogravimetry (TG/DTG). In air atmosphere, two different mechanisms causing loss of mass were observed known as loss of moisture, and decomposition of kerogen and bitumen. Kinetic parameters of the samples are determined using ASTM-I and II (DSC), Kissinger, and KAS (TG–DTG) kinetic models and the results are discussed.     

Thermal Decomposition and Dehydration Kinetics of Tetra(piperidinium) Octamolybdate Tetrahydrate in Air

Thermal decomposition of tetra(piperidinium) octamolybdate tetrahydrate, [C₅H₁₀NH₂]₄[Mo₈O₂₆]·4H₂O, was investigated in air by means of TG‐DTG/DTA, DSC, TG‐IR and SEM. TG‐DTG/DTA curves showed that the decomposition proceeded through three well‐defined steps with DTA peaks closely corresponding to mass loss obtained. Kinetics analysis of its dehydration step was performed under non‐isothermal conditions. The dehydration activation energy was calculated through Friedman and Flynn‐Wall‐Ozawa (FWO) methods, and the best‐fit dehydration kinetic model function was estimated through the multiple linear regression method. The activation energy for the dehydration step of [C₅H₁₀NH₂]₄[Mo₈O₂₆]·4H₂O was 139.7 kJ/mol. The solid particles became smaller accompanied by the thermal decomposition of the title compound.     

An investigation on solid-state pyrolytic decomposition of barium trihemiaquatris(oxalato)lanthanate(III)decahydrate using TG–DTA in air and DSC in nitrogen

A heterobimetallic oxalate coordination compound, barium(II)trihemiaquatris(oxalato)lanthanate(III)decahydrate, has been synthesized and characterized by elemental analysis, IR and electronic spectral studies. Crystalline nature of the compound with orthorhombic symmetry is corroborated from powder X-ray diffraction studies. The solid-state pyrolytic decomposition studies (TG, DTG and DTA) in air showed that the compound decomposed mainly to BaO, La₂O₃ and BaLa₂O₄ along with carbides of both the metal at ca. 1,000 °C through a number of intermediate steps. The DSC studies in nitrogen up to 670 °C found that the compound crumbled through several endothermic and one exothermic processes. The kinetic parameters, E*, lnk _o, ΔH ^# and ΔS ^# of dehydration and decomposition steps in nitrogen are evaluated from DSC peaks and discussed.     

Thermal characterization of the poultry fat biodiesel

Chemical composition of oils and fats used in the biodiesel synthesis can influence in processing and storage conditions, due to the presence of unsaturated fatty acids. An important point is the study of the biodiesel thermal stability to evaluate its quality using thermal analysis methods. In this study the thermal stabilities of the poultry fat and of their ethyl (BEF) and methyl (BMF) biodiesels were determined with the use of thermogravimetry (TG/DTG), differential thermal analysis (DTA) and differential scanning calorimetry (DSC), in different atmospheres. The TG/DTG curves of the poultry fat in synthetic air presented three decomposition steps while only one step was observed in nitrogen (N₂) atmosphere. The DSC results indicated four exothermic enthalpic transitions in synthetic air and an endothermic transitions in N₂ atmosphere attributed to the combustion process and to the volatilization and/or decomposition of the fatty acids, respectively. For both biodiesels the TG/DTG curves in air indicated two mass loss steps. In the DSC curves four exothermic transitions were observed in synthetic air besides an endothermic one in N₂ atmosphere.     

Effect of accelerated thermal ageing on the thermal behaviour of the recently made parchments

To reveal the fire injuring of parchment, the changes in the thermal behaviour of some goat parchments, obtained from skins originating from different animals, as a result of thermal aging were determined by thermal analysis methods (DSC; simultaneous TG/DTG, DSC; micro hot table (MHT)). Thermal aging of parchments was revealed to bring about the decrease in shrinkage temperature, absolute value of enthalpy of denaturation in water and some changes in non-isothermal parameters characteristic for dehydration process in static air atmosphere. The results obtained by DSC analysis performed in N₂ and O₂ flows as well as those obtained by simultaneous TG/DTG, DSC analyses have shown that both softening (melting) process parameters and parameters of thermo-oxidative processes have not been changed by thermal ageing. The results obtained by thermal analysis methods were correlated with those obtained by microscopic investigation of parchment samples immersed in water and scanning electron microscopy (SEM). The application of these microscopic techniques has revealed the morphology changes in the investigated parchments as a result of thermal degradation.     

Thermal studies of chitin–chitosan derivatives

New poly(azo) amino-chitosan compounds were obtained from the azo coupling reaction of N-benzyl chitosan and diazonium salts. The thermal behavior of these compounds was studied by thermogravimetric analysis (TG), differential thermogravimetric analysis (DTG), TG coupled with a Fourier-transform infrared, and differential scanning calorimetry (DSC). TG/DTG curves of chitin–chitosan polymer showed two thermal events attributed to water loss and decomposition of the polysaccharide after cross-linking reactions. Thermal analysis of the poly(azo) amino-chitosan compounds showed that the decomposition temperatures decreased when compared to the starting chitin–chitosan and N-benzyl chitosan. DSC results showed an agreement with the TG/DTG analyses. Thermal behavior of poly(azo) amino-chitosans suggest that these compounds could be considered as potential thermal sensors.     

Thermal properties,induction period,interfacial energy and nucleation parameters of solution grown benzophenone

The kinetic parameters (reaction order, n, activation energy, E, pre-exponential factor, A, constant rate, k) for the dehydration step due to elimination of osmotic water and hydrogen-bounded water with the carboxylic groups, and for the anhydrifying step owing to the dehydration of two neighboring (-COOH) groups, were determined under non-isothermal conditions for some carboxylic resins with acrylic-divinylbenzene (DVB) matrix. The kinetic parameters were evaluated by means of isoconversional methods from (TG/DTG) thermal analysis data. The results show a dependence of the apparent kinetic parameters on the cross-linking degree, granulation, gel/macroporous matrix nature, exchange capacity and heating rate.     

Thermal analysis study of the effect of coal-burning additives on the combustion of coals

Thermal analysis is widely used in combustion research for both fundamental and practical investigations. Efficient combustion of coals in cement industry is very important and necessary. In this research, the effects of three coal-burning additives on burning behaviour of bituminous coal and anthracite were studied with the help of thermogravimetry (TG) and differential scanning calorimetric (DSC) analysis. The kinetic study was carried out and the results were presented. The results showed that the coal-burning additives especially LSZ can reduce the ignition temperature, increase the ignition index D _i, combustion ending index D _f and affect the activation energy of the coal samples studied. The coal-burning additives especially LSZ can improve coal combustion effectiveness.     

Lifetime simulation and thermal characterization of PVC cable insulation materials

Thermal behavior of commercial PVC cable insulation both before and after extraction of plasticizers, fillers and other agents were tested by TG/DTG and DSC during heating in the range 20-800°C in air. The ultrasound enhanced hexane extraction and dissolution in THF with subsequent precipitation of PVC were used to prepare 'extracted' and 'precipitated' samples. The total mass loss measured for the 'non-treated', 'extracted' and 'precipitated' PVC samples was 71.6, 66.6 and 97%, respectively. In the temperature range 200-340°C the release of dioctylphthalate, HCl and CO₂was observed by simultaneous TG/FTIR. From TG results measured at different heating rates (1.5, 5, 10, 15 K min^-1) in the range 200-340°C the non-isothermal kinetics of the PVC samples degradation was determined. Activation energy values of the thermal degradation processes calculated by ASTM E 698 method, for 'non-treated', 'extracted' and 'precipitated' PVC samples were 174.6±17 kJ min^-1, 192.8±19 kJ min^-1, 217.1±20 kJ min^-1, respectively. These kinetic parameters were used for the lifetime simulation of the materials.     

A Kinetic Study of the Dehydration of VOPO4.2H2O by Thermal Methods

The dehydration of VOPO₄.2H₂O hasbeen studied by thermogravimetric analysis (TGA),differential thermal analysis (DTA) and differentialscanning calorimetry (DSC). From the shift of the DTA,DTG, and DSC peaks, activation energies of thedehydration processes have been calculated based onKissinger's method. The most suitable kinetic modelsfor two-step dehydration have been found.     

Comparative kinetic study of decomposition of some diazepine derivatives under isothermal and non-isothermal conditions

Thermal analysis is one of the most widely used methods for studying the solid state of pharmaceutical substances. TG/DTG and DSC curves provide important information regarding the physical properties of the pharmaceutical compounds (stability, compatibility, polymorphism, kinetic analysis, phase transitions etc.). The purpose of a kinetic investigation is to calculate the kinetic parameters and the kinetic model for the studied process. The results are further used to predict the system’s behaviour in various circumstances. A kinetic study regarding the diazepam, nitrazepam and oxazepam thermal decomposition was performed, under non-isothermal and isothermal conditions and in a nitrogen atmosphere, for the temperature steps: 483, 498, 523, 538 and 553 K. The TG/DTG data were processed by three methods: isothermal model-fitting, Friedman’s isothermal-isoconversional and Nomen-Sempere non-parametric kinetics. In the model-fitting methods the kinetic triplets (f(α), A and E _a) that defines a single reaction step resulted in being at variance with the multi-step nature of diazepines decomposition. The model-free approach represented by isothermal and non-isothermal isoconversional methods, gave dependences of the activation energies on the extent of conversion. It is very difficult to obtain an accord with the similar data which resulted under non-isothermal conditions from a previous work. The careful treatment of the kinetic parameters obtained in different thermal conditions was confirmed to be necessary, as well as a different strategy of experimental data processing.     

Preparation and Study of Thermal Decomposition Mechanism of Zn(Thr)(AcO)_2·2H_2O

Introduction -Amino acids as additive have a wide application in medicines, foodstuff and cosmetics.1-3 The synthetic methods of amino acid have been reviewed.4,5 The solu-bility property of Zn(AcO)2-Thr-H2O (Thr=Threonine) system at 298.15 K has been investigated by the semimicro-phase equilibrium method, in which the phase region of the complex did not exist.6 The prepara-tion of Zn(Thr)SO4H2O was reported in Ref. 7∶3 times volume of acetone relative to that of water was added into t…     

Kinetics and mechanism of non-isothermal dehydration of nickel acetate tetrahydrate in air

The non-isothermal decomposition of nickel acetate tetrahydrate in air was studied using thermogravimetry (TG)–DTG, differential scanning calorimetry (DSC) and XRD techniques. The decomposition occurs in two major steps and the final product is NiO. The dependence of mass loss on heating rates in TG measurements imply that the dehydration and hydrolysis concur at temperature below 240 °C; the apparent activation energies calculated by Flynn, Wall and Ozawa (FWO) isoconversional method indicate the existence of a consecutive process. The kinetics of the first major decomposition step (below 240 °C) was obtained with multivariate non-linear regression of four measurements at different heating rates. According to the kinetics results from non-linear regression, the dehydration reaction (F1 type with an activation energy E of 167.7 kJ/mol) goes first. After the loss of almost half of water, the retained water and acetate are linked to each other by hydrogen bonding, so dehydration and hydrolysis concur. The pathway with a lower E is related to the hydrolysis process and the other is corresponding to the dehydration process. The simulations of reactants at different heating rates were used to verify the correctness of the reaction model. With the kinetics results, the dehydration mechanism was discussed for the first time.     

Thermal behaviour of some ester derivatives of p-tert-butyl calix[n]arene

The thermal behaviour of three ester derivatives of p-tert-butyl calix[n]arene (n?=?4, 6 and 8) in comparison with the parent calixarene was investigated by means of the thermogravimetric (TG) and differential thermogravimetic (DTG) analysis and differential scanning calorimetry (DSC). The thermal stability domains, the composition of the pyrolysis products and the thermal effects, were determined on the basis of TG, DTG and DSC plots registered in nitrogen flow. Attempts to analyse the evolved gases by TG-FTIR coupling were also performed. It was demonstrated that the stability of the calix[n]arene derivatives depends on both the size of the hydrophobic cavity and number of the substituting groups grafted on the calix[n]arene skeleton.     

Non-isothermal Kinetics of the Thermal Decomposition of 3-Nitro-1,2,4-triazol-5-one Magnesium Complex

Introduction3 Nitro 1,2 ,4 triazol 5 one (NTO)metalcomplexeshavemanyspecialstructuresandsomepotentialusesinammunition .1 4 Wepreviouslypreparedanddeterminedthecrystalstructureofitsmagnesiumcomplex ,5andinthispaper ,wediscusseditsthermalbehaviorbyDSCandTG/DTGtechniquesandstudieditsnon isothermalkineticsbythemeansoftheKissingermethod ,theOzawamethod ,thedifferentialmethodandtheintegralmethod .ExperimentalSample[Mg(H2 O) 6 ](NTO) 2 ·2H2 Owaspreparedasfollows :AcalculatedamountofMg(OH…