Dissociative adsorption of carbon monoxide on Mo(110): first-principles theory

The adsorption and dissociation of carbon monoxide on Mo (110) surface is studied with density functional theory. The results at different sites (atop, short bridge, long bridge, and hollow) are presented. The hollow site is found to be the most stable adsorption site for CO. The CO molecule is found to adsorb in end-on configurations (alpha states) at high coverage and inclined configurations (beta states) at low coverage. The dissociation activation energy from beta states is found to be approximately 1 eV lower than from alpha state. The adsorption of dissociation products, C and O, on Mo(110) has also been studied. The most stable adsorption site for C and O is long bridge and hollow site, respectively. The adsorption of C and O at low coverage is, in general, stronger than at high coverage, which is partly responsible for the high reactivity of CO dissociation at low coverage, since the binding energy of CO is not very sensitive to the coverage.     

First-principles study of C adsorption, O adsorption, and CO dissociation on flat and stepped Ni surfaces

The adsorption of atomic oxygen and carbon was studied with plane wave density functional theory on four Ni surfaces, Ni(110), Ni(111), Ni(210), and Ni(531). Various adsorption sites on these surfaces are examined in order to identify the most favorable adsorption site for each atomic species. The dependence of surface bonding on adsorbate coverage is also investigated. Adsorption energies and structural information are obtained and compared with existing experimental results for Ni(110) and Ni(111). In addition, activation barriers to CO dissociation have been determined on Ni(111) and Ni(531) by locating the transition states for these processes. Our results indicate that the binding energies of C are comparatively stronger on stepped surfaces than on flat surfaces, and the energy barriers associated with CO dissociation strongly favor reactions occurring near surface steps.     

Theoretical study of the CH2 + O photodissociation of formaldehyde adsorbed on the Ag(111) surface

Configuration interaction calculations of the ground and excited states of the H2CO molecule adsorbed on the Ag(111) surface have been carried out to study the photoinduced dissociation process leading to polymerization of formaldehyde. The metal-adsorbate system has been described by the embedded cluster and multireference configuration interaction methods. The pi electron-attachment H2CO- and n-pi* internally excited H2CO* states have been considered as possible intermediates. The calculations have shown that H2CO* is only very weakly bound on Ag(111), and thus that the dissociation of adsorbed formaldehyde due to internal excitation is unlikely. By contrast, the H2CO- anion is strongly bound to Ag(111) and gains additional vibrational energy along the C-O stretch coordinate via Franck-Condon excitation from the neutral molecule. Computed energy variations of adsorbed H2CO and H2CO- at different key geometries along the pathway for C-O bond cleavage make evident, however, that complete dissociation is very difficult to attain on the potential energy surface of either of these states. Instead, reneutralization of the vibrationally excited anion by electron transfer back to the substrate is the most promising means of breaking the C-O bond, with subsequent formation of the coadsorbed O and CH2 fragments. Furthermore, it has been demonstrated that the most stable state for both dissociation fragments on Ag(111) is a closed-shell singlet, with binding energies relative to the gas-phase products of approximately 3.2 and approximately 1.3 eV for O and CH2, respectively. Further details of the reaction mechanism for the photoinduced C-O bond cleavage of H2CO on the Ag(111) surface are also given.     

O2 dissociative adsorption on the Cu‐, Ag‐, and W‐doped Al(111) surfaces from DFT computation

The O₂ adsorption and dissociation on M‐doped (M = Cu, Ag, W) Al(111) surface were studied by density functional theory. The adsorption energy of adsorbate, the average binding energy and surface energy of Al surface, and the doping energy of doping atom were calculated. All the doped atoms can be stably combined with Al atoms, while being slightly embedded in the surface to a certain depth. The TOP‐type surfaces are the most stable doped surfaces for O₂ adsorption, which is related to the orbital hybridization between the adsorbate and the surface atoms, the electronegativity, and the orbital energy level of the doping atoms. Moreover, the O atoms and doping atoms contribute significantly to the density of states (DOS), especially the O‐p orbital electrons and the d orbital electrons of doping atoms. The degree of O₂ dissociation is related to the doping atoms on Al surfaces, and the doping atoms actually resist the dissociation of O₂. W atoms have the best resistance effect on the O₂ dissociation as compared with Cu and Ag atoms, especially W‐1NN surface, which has both large barrier energy and reaction energy.     

Silver residues as a possible key to a remarkable oxidative catalytic activity of nanoporous gold

Recently, several forms of unsupported gold were shown to display a remarkable activity to catalyze oxidation reactions. Experimental evidence points to the crucial role of residual silver present in very small concentrations in these novel catalysts. We focus on the catalytic properties of nanoporous gold (np-Au) foams probed via CO and oxygen adsorption/co-adsorption. Experimental results are analyzed using theoretical models represented by the flat Au(111) and the kinked Au(321) slabs with Ag impurities. We show that Ag atoms incorporated into gold surfaces can facilitate the adsorption and dissociation of molecular oxygen on them. CO adsorbed on top of 6-fold coordinated Au atoms can in turn be stabilized by co-adsorbed atomic oxygen by up to 0.2 eV with respect to the clean unsubstituted gold surface. Our experiments suggest a linking of that most strongly bound CO adsorption state to the catalytic activity of np-Au. Thus, our results shed light on the role of silver admixtures in the striking catalytic activity of unsupported gold nanostructures.     

甲酸在Pt-Sn(111)/C合金表面吸附的量子化学研究

采用周期平板模型, 结合密度泛函理论对HCOOH和CO在Pt-Sn(111)/C表面的top、brigde、hcp和fcc共计8个位点的吸附模型进行构型优化和能量计算, 并对吸附前后的频率、电荷、能带和态密度进行了研究. 计算结果表明fcc-Pt₃是较为有利的吸附位点, Sn掺杂之后费米能级右移, 导带增宽, 价带和导带的位置略微降低, 合金表面电子结构变化利于甲酸的吸附解离催化, 可使甲酸燃料电池阳极催化性能显著提高. 通过催化剂表面的抗中毒分析, 发现CO在Pt-Sn(111)/C表面的吸附能以两种趋势下降, 阳极催化剂掺杂改性后抗CO中毒能力增强.     

α,β-不饱和醛在Ni-Pt(111)面上吸附的理论研究

利用密度泛函理论研究了巴豆醛和肉桂醛分子在Pt-Ni-Pt(111)面的吸附构型以及相关电子性质. 吸附构型与吸附能结果表明, 巴豆醛和肉桂醛在覆盖度为1/25 ML的条件下, 以C=C和C=O双键协同吸附在Pt-Ni-Pt(111)面较为稳定, 且肉桂醛与Pt-Ni-Pt(111)面的吸附能远大于巴豆醛. 由Mulliken电荷布局和差分电荷密度可知, 在吸附过程中肉桂醛分子向Pt-Ni-Pt(111)面上转移的电荷数较巴豆醛更多, 相互作用更大. 由电子态密度分析结果可知, 不饱和醛与Pt-Ni-Pt(111)面的吸附作用主要是由于分子的p轨道电子与催化剂d轨道电子之间的相互作用. 由于苯基的存在使肉桂醛分子在Pt-Ni-Pt(111)面上的吸附更强, 且平行于催化剂表面.     

甲醛在CeO2(111)表面吸附的密度泛函理论研究

采用基于第一性原理的密度泛函理论和周期平板模型, 研究了甲醛在以桥氧为端面的CeO2(111)稳定表面上的吸附行为. 通过对不同覆盖度, 不同吸附位的甲醛吸附构型、吸附能及电子态密度的分析发现, 甲醛在CeO2(111)表面存在化学吸附与物理吸附两种情况. 化学吸附结构中甲醛的碳、氧原子分别与表面的氧、铈原子发生相互作用, 形成CH2O2物种; 吸附能随着覆盖度的增加而减小. 与自由甲醛分子相比, 物理吸附的甲醛构型变化不大, 其吸附能较小. 利用CNEB(climbing nudged elastic band)方法计算了甲醛在CeO2(111)表面的初步解离反应活化能(约1.71 eV), 远高于甲醛脱附能垒, 这与甲醛在清洁CeO2(111)表面程序升温脱附实验中产物主要为甲醛的结果相一致.     

First principle and ReaxFF molecular dynamics investigations of formaldehyde dissociation on Fe(100) surface

Detailed formaldehyde adsorption and dissociation reactions on Fe(100) surface were studied using first principle calculations and molecular dynamics (MD) simulations, and results were compared with available experimental data. The study includes formaldehyde, formyl radical (HCO), and CO adsorption and dissociation energy calculations on the surface, adsorbate vibrational frequency calculations, density of states analysis of clean and adsorbed surfaces, complete potential energy diagram construction from formaldehyde to atomic carbon (C), hydrogen (H), and oxygen (O), simulation of formaldehyde adsorption and dissociation reaction on the surface using reactive force field, ReaxFF MD, and reaction rate calculations of adsorbates using transition state theory (TST). Formaldehyde and HCO were adsorbed most strongly at the hollow (fourfold) site. Adsorption energies ranged from ?22.9 to ?33.9 kcal/mol for formaldehyde, and from ?44.3 to ?66.3 kcal/mol for HCO, depending on adsorption sites and molecular direction. The dissociation energies were investigated for the dissociation paths: formaldehyde → HCO + H, HCO → H + CO, and CO → C + O, and the calculated energies were 11.0, 4.1, and 26.3 kcal/mol, respectively. ReaxFF MD simulation results were compared with experimental surface analysis using high resolution electron energy loss spectrometry (HREELS) and TST based reaction rates. ReaxFF simulation showed less reactivity than HREELS observation at 310 and 523 K. ReaxFF simulation showed more reactivity than the TST based rate for formaldehyde dissociation and less reactivity than TST based rate for HCO dissociation at 523 K. TST‐based rates are consistent with HREELS observation. © 2013 Wiley Periodicals, Inc.     

Al2O3/Au(111)反相催化剂在CO氧化反应中界面作用的理论研究

氧化物负载的金催化剂具有温和条件下优异的CO催化氧化活性。实验与理论计算表明,金与氧化物两相界面在催化反应过程中具有重要地位。反相催化剂提供了全新的角度以探究界面的重要地位。本文以Au（111）表面负载Al₂O₃团簇为反相催化剂模型,基于密度泛函理论,对催化剂模型的构型、界面性质以及O₂、CO的吸附与氧化进行了理论计算与研究。理论计算表明：电荷的迁移增强了Al₂O₃小团簇在Au（111）表面的附着,在催化剂金表面与氧化铝的两相界面位置,Au原子与Al原子的协同作用使得氧分子易于在界面位置吸附,并因此高度活化。对催化CO氧化反应路径,分别计算了缔合机理和解离机理不同路径,从活化能分析表明缔合机理比解离机理更可能发生。本文的工作揭示了反相催化剂催化CO氧化的活性本质,表明两相界面在金催化CO氧化中具有重要作用。     

Theoretical study of NO adsorption/dissociation on Pd (100) and (111) surfaces

Both adsorption and dissociation of the diatomic molecular NO on Pd (100) and (111) surfaces are studied using the extended London‐Eyring‐Polyani‐Sato (LEPS) method constructed by means of 5‐MP (the 5‐parameter Morse potential). All critical characteristics of the system that we obtain, such as adsorption geometry, binding energy, eigenvalues for vibration, are in good agreement with the experimental results. On Pd (100) surface, NO prefers to adsorb in fourfold hollow site (H) uprightly at low coverage. With increase in the coverage NO gradually tilts in fourfold hollow and bridge sites. For NO? Pd (111) system, two adsorption states are found at low coverage, of which one adsorption state is the B(tilt) state that the centroid of NO projects at bridge site, another (H? B? H state) that NO almost parallels to the (111) surface with the vibration frequency of 610 cm^?1, but the frequency is near to that of the atoms, which is easy to be ignored in experiments. At high coverage, two transitional states (BH and HT) are found. NO is difficult to dissociate on Pd (100) and (111) surfaces. Especially for NO? Pd (111) system, the three‐well‐potential dissociation mode is initially put forward to show the remarkable dissociation process with two dissociation transitional states of NO on Pd (111). Copyright © 2008 John Wiley & Sons, Ltd.     

Density function theory study of CO adsorption on Fe3O4(111) surface

Density functional theory calculations have been carried out for CO adsorption on the Fe(oct2)- and Fe(tet1)-terminated Fe(3)O(4)(111) surfaces, which are considered as active catalysts in water-gas shift reaction. It is found that the on-top configurations are most stable on these two surfaces. Some bridge configurations are also stable in which the new C-O bond formed between the surface O atom and the C atom of CO. The adsorption on the Fe(oct2)-terminated surface is more stable than on the Fe(tet1)-terminated surface. The density of state reveals the binding mechanism of CO adsorption on the two surfaces. Our calculations have also shown that the absorbed CO can migrate from the on-top site to the bridge site or 3-fold site. The oxidation of CO via surface oxygen atoms is feasible, which is in good agreement with experimental results.     

甲硫醇在Cu(111)表面的解离吸附: 密度泛函理论研究

采用基于密度泛函理论的第一性原理方法和平板模型研究了CH₃SH分子在Cu(111)表面的吸附反应.系统地计算了S原子在不同位置以不同方式吸附的一系列构型, 第一次得到未解离的CH₃SH分子在Cu(111)表面顶位上的稳定吸附构型,该构型吸附属于弱的化学吸附, 吸附能为0.39 eV. 计算同时发现在热力学上解离结构比未解离结构更加稳定. 解离的CH₃S吸附在桥位和中空位之间, 吸附能为0.75-0.77 eV. 计算分析了未解离吸附到解离吸附的两条反应路径, 最小能量路径的能垒为0.57 eV. 计算结果还表明S―H键断裂后的H原子并不是以H₂分子的形式从表面解吸附而是以与表面成键的形式存在. 通过比较S原子在独立的CH₃SH分子和吸附状态下的局域态密度, 发现S―H键断裂后S原子和表面的键合强于未断裂时S原子和表面的键合.     

A DFT study of the adsorption and dissociation of CO on Fe(100): influence of surface coverage on the nature of accessible adsorption states.

In the present article, we report adsorption energies, structures, and vibrational frequencies of CO on Fe(100) for several adsorption states and at three surface coverages. We have performed a full analysis of the vibrational frequencies of CO, thus determining what structures are stable adsorption states and characterizing the transition-state structure for CO dissociation. We have calculated the activation energy of dissociation of CO at 0.25 ML (ML = monolayers) as well as at 0.5 ML; we have studied the dissociation at 0.5 ML to quantify the destabilization effect on the CO(alpha3) molecules when a neighboring CO molecule dissociates. In addition, it is shown that the number and nature of likely adsorption states is coverage dependent. Evidence is presented that shows that the CO molecule adsorbs on Fe(100) at fourfold hollow sites with the molecular axis tilted away from the surface normal by 51.0 degrees. The asorprton energy of the CO molecule is -2.54 eV and the C-O stretching frequency is 1156 cm(-1). This adsorption state corresponds to the alpha3 molecular desorption state reported in temperature programmed desorption (TPD) experiments. However, the activation energy of dissociation of CO(alpha3) molecules at 0.25 ML is only 1.11 eV (approximately 25.60 kcal mol(-1)) and the gain in energy is -1.17 eV; thus, the dissociation of CO is largely favored at low coverages. The activation energy of dissociation of CO at 0.5 ML is 1.18 eV (approximately 27.21 kcal mol(-1)), very similar to that calculated at 0.25 ML. However, the dissociation reaction at 0.5 ML is slightly endothermic, with a total change in energy of 0.10 eV Consequently, molecular adsorption is stabilized with respect to CO dissociation when the CO coverage is increased from 0.25 to 0.5 ML.     

水在HfO2(111)和(110)表面的吸附与解离

运用广义梯度近似密度泛函理论方法(GGA-PW91)结合周期平板模型, 研究水分子在二氧化铪(111)和(110)表面不同吸附位置在不同覆盖度下的吸附行为. 通过比较不同吸附位的吸附能和几何构型参数发现:(111)和(110)表面铪原子(top 位)是活性吸附位. 水分子与表面的吸附能值随覆盖度的变化影响较小. 在(111)和(110)表面, 水分子都倾向以氧端与表面铪原子相互作用. 同时也计算了羟基、氧和氢在表面的吸附, Mulliken 电荷布居, 态密度及部分频率. 结果表明, 在两种表面羟基以氧端与表面铪相互作用, 氧原子与表面铪和氧原子同时成键, 而氢原子直接与表面氧原子相互作用形成羟基. 通过过渡态搜索, 水分子在(111)和(110)表面发生解离, 反应能垒分别为9.7和17.3 kJ·mol^-1, 且放热为59.9和47.6 kJ·mol^-1.     

CO在CeO2(111)表面的吸附与氧化

采用密度泛函理论计算了CO在CeO2(111)表面的吸附与氧化反应行为. 结果表明, O2在洁净的CeO2(111)表面为弱物理吸附, 而在氧空位表面是强化学吸附, 且O2分子活化程度较大, O—O键长为0.143 nm. CO在CeO2(111)表面吸附行为的研究表明, CO在洁净表面及氧空位表面上为物理吸附, 吸附能均小于0.42 eV; 当表面氧空位吸附O2后, CO可吸附生成二齿碳酸盐中间体或直接生成CO2, 与原位红外光谱结果相一致. 表面碳酸盐物种脱附生成CO2的能垒仅为0.28 eV. 计算结果表明, 当CeO2表面存在氧空位时, Hubbard参数U对CO吸附能有一定的影响. CeO2载体在氧化反应中可能的催化作用为, 在氧气氛下, CeO2表面氧空位吸附O2分子, 形成活性氧物种, 参与CO催化氧化反应.     

Pt（111）和Pt3Ni（111）表面上CO催化氧化反应的密度泛函理论研究

采用密度泛函理论,对Pt(111)和Pt3Ni(111)表面上CO和O的单独吸附、共吸附以及CO的氧化反应进行了系统的研究. 结果表明, Pt3Ni(111)表面上CO的吸附弱于Pt(111)表面, O的吸附明显强于Pt(111)表面. 两个表面表现出相似的CO催化氧化活性. 表面Ni的存在不但稳定了O的吸附,同时也降低了过渡态O的能量.     

CO2 reforming of CH4 on Ni(111): a density functional theory calculation

CO(2) reforming of CH(4) on Ni(111) was investigated by using density functional theory. On the basis of thermodynamic analyses, the first step is CH(4) sequential dissociation into surface CH (CH(4) --> CH(3) --> CH(2) --> CH) and hydrogen, and CO(2) dissociation into surface CO and O (CO(2) --> CO + O). The second step is CH oxygenation into CHO (CH + O --> CHO), which is more favored than dissociation into C and hydrogen (CH --> C + H). The third step is the dissociation of CHO into surface CO and H (CHO --> CO + H). This can explain the enhanced selectivity toward the formation of CO and H(2) on Ni catalysts. It is found that surface carbon formation by the Bouduard back reaction (2CO = C((ads)) + CO(2)) is more favored than by CH(4) sequential dehydrogenation. The major problem of CO(2) reforming of CH(4) is the very strong CO adsorption on Ni(111), which results in the accumulation of CO on the surface and hinders the subsequent reactions and promotes carbon deposition. Therefore, promoting CO desorption should maintain the reactivity and stability of Ni catalysts. The computed energy barriers of the most favorable elementary reaction identify the CH(4) activation into CH(3) and H as the rate-determining step of CO(2) reforming of CH(4) on Ni(111), in agreement with the isotopic experimental results.     

基于第一性原理研究铱(111)和(100)表面的原子吸附（英文）

本文利用第一性原理密度泛函理论研究了九种不同的吸附原子在铱(Ir)的(111)和(100)表面上的吸附性质.探讨了Ir表面的功能化,因此吸附能、稳定的结构、态密度和磁矩,这将为进一步研究其在催化和其他表面应用中的可能展现的功能提供重要信息.研究表明,三/四重空位点是Ir(111)/(100)表面最有利的吸附位点.通过对大范围的覆盖率(从0.04到1个单层)的研究,表明吸附原子的吸附能具有很强的覆盖率依赖性.吸附能随着覆盖率的增加而增加,这意味着吸附物之间存在排斥相互作用.吸附原子和衬底电子态之间的强杂化会影响吸附性质,同时吸附原子的磁矩被抑制.通过Bader电荷分析,揭示了吸附原子和衬底之间的大量电荷转移.与(111)表面的结合相比,(100)表面吸附原子的结合更强.     

CO2 adsorption on TiO2(110) rutile: insight from dispersion-corrected density functional theory calculations and scanning tunneling microscopy experiments

Adsorption of CO(2) on the rutile(110) surface was investigated using dispersion-corrected density functional theory and scanning tunneling microscopy (STM). On the oxidized surface the CO(2) molecules are found to bind most strongly at the five-fold coordinated Ti sites adopting tilted or flat configurations. The presence of bridging oxygen defects introduces two new adsorption structures, the most stable of which involves CO(2) molecules bound in tilted configurations at the defect sites. Inclusion of dispersion corrections in the density functional theory calculations leads to large increases in the calculated adsorption energies bringing these quantities into good agreement with experimental data. The STM measurements confirm two of the calculated adsorption configurations.