Effect of γ-irradiation on the properties of poly(ester urethane) elastomer

The influence of irradiation with ⁶⁰Co γ-rays on gelation, change in the mechanical characteristics, and the formation of supermolecular structure in a poly(ester urethane) elastomer synthesized from oligoether adipate and diisocyanate, as well as a diol with or without double carbon-carbon bonds, was studied. It was found that the presence of double carbon-carbon bonds in the structure of the elastomer ensures the predominance of crosslinking over degradation processes. It was shown that γ-irradiation at a dose of 380 kGy is accompanied by the formation of a microglobular structure of ～1 μm size. The specifics of changes in the mechanical characteristics depending on the absorbed dose are discussed.     

Preparation and characterization of poly(urethane–urea) microcapsules containing limonene. Kinetic analysis

The synthesis of poly(urethane–urea) shells (PUU) using poly(ethylene glycols) of different molecular weights and methylene-bis(4-cyclohexylisocyanate) was performed for the microencapsulation of limonene, using a step-growth polymerization process. The obtained microcapsules were structurally characterized by dynamic light scattering, optical microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The results showed that the core–shell microcapsules had spherical shape, a mean diameter in between 10 and 20?µm, and characteristic urethane-urea bonds. Furthermore, the molecular weight of polyol influences the entrapment efficiency, which ranged from 38 to 55%. The release data were analyzed by applying the Korsmeyer–Peppas model.     

Studies on Diels–Alder thermoresponsive networks based on ether–urethane bismaleimide functionalized poly(vinyl alcohol)

Thermoreversible networks obtained by the Diels–Alder cycloaddition reaction of poly(vinyl furfural) with urethane bismaleimides containing polyether chain were synthesized. The formation of the networks was confirmed by attenuated total reflectance in conjunction with Fourier transform infrared spectroscopy (ATR–FTIR). The materials thermal properties were investigated using differential scanning calorimetry (DSC) and a coupling of dynamic thermogravimetry with Fourier transform infrared spectroscopy and mass spectrometry (TG–FTIR–MS) for pyrolysis behaviour under nitrogen atmosphere. A thermal decomposition mechanism of the networks and poly(vinyl furfural) was discussed via evolved gas analysis. The thermoreversibility of the networks was demonstrated by the presence of the endothermic peak characteristic to the retrodienic process on the DSC heating curves and also the appearance of the exothermic peak, due to the dienic process, on the DSC cooling curve. The dynamic contact angle and free surface energy values of the networks were determined. Measures of the heterogeneity and roughness of the surfaces suggested that the surfaces of the networks’ films are more homogenous than the initial poly(vinyl furfural) surface. Dynamic water vapour sorption studies were conducted.     

Preparation of new poly(ester triazole) and poly(amide triazole) by “click chemistry”

New dialkynyl monomers containing furan and ester or amide units were prepared via three step reactions from ethyl furan-2-carboxylate. Their click polymerization with either poly(ethylene glycol) diazide or poly(tetrahydrofuran) diazide catalyzed by Cu(I) led to corresponding amorphous poly(ester triazole) and poly(amide triazole) with molecular weights in the range of (7–11) × 10³ and with glass transition temperatures in the range of ?35 and ?19°C. The temperature at 5% wt loss (T ₁₀), determined from TGA of polyazomethines were in the range 345–365°C indicating their good thermal stability.     

Interacting blends of Styrenated unsaturated poly (ester–amide)s with commercial unsaturated polyester resin (o-phthalic anhydride based)

Unsaturated poly (ester–amide)s resins (UPEAs) were prepared by the reaction between an epoxy resin, namely diglycidyl ether of bisphenol-A (DGEBA) and unsaturated aliphatic bisamic acids (B_1–4) using a base catalyst. These UPEAs were then diluted by styrene and blended with commercial unsaturated polyester resin (o-phthalic anhydride based) to produce a homogeneous resin. The curing of these Styrenated UPEAs–UPR blends was carried out using Benzoyl peroxide (BPO) as a catalyst and N,N′-Dimethyl aniline (DMA) as a promoter. The glass fiber reinforced composites (i.e. laminates) of these Styrenated UPEAs–UPR (o-phthalic anhydride based) blends were fabricated. The mechanical and chemical resistance properties of the glass fiber composites have also been evaluated. The unreinforced cured samples of the Styrenated UPEAs–UPR (o-phthalic anhydride based) blends were also analyzed by thermogravimetry (TGA).     

Molecular simulation of an amorphous poly(methyl methacrylate)–poly(tetrafluoroethylene) interface

Molecular dynamics calculations of an amorphous interfacial system of poly(methyl methacrylate) (PMMA) and poly(tetrafluoroethylene) (PTFE) containing about 10,000 interaction sites were performed for 15 ns under constant pressure and constant temperature conditions. The time evolutions of the thickness, density and number of atomic pairs in the interfaces suggested that the interfaces reached their equilibrium states with an interfacial thickness of about 2 nm at 500 K. The molecular motion in the interface and bulk was compared using mean square displacement and torsional autocorrelation function. The separation at a PMMA/PTFE interface was mimicked using non-equilibrium molecular dynamics calculations by applying the potential energy to the MD cell in a direction perpendicular to the interface. Initially, the PTFE layer close to the interface was deformed, and before complete separation, some segments of the PTFE molecules extended from the bulk to the surface of the PMMA layer, which were attached by the intermolecular interaction. The remaining PTFE molecules were entangled in the bulk, which probably prevented the transfer of the PTFE molecules to the surfaces of the PMMA layers. On the other hand, the PMMA layer was only slightly deformed. This separation behavior can be explained by taking into account the intermolecular interaction, the barrier to the conformational changes of the backbones and the entanglement of the PTFE molecules in the bulk.     

pH-responsive star-shaped functionalized poly(ethylene glycol)-b-poly(ε-caprolactone) with amino groups

Functional star-shaped 4-arm poly(ethylene glycol)-b-poly[(ε-caprolactone-co-γ-amino-ε-caprolactone)] (4-arm PEG-b-P(CL-co-ACL) was synthesized through ring-opening polymerization. The structure of the copolymer was confirmed by ¹H NMR, Fourier transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). To further understand the copolymers, the difference of the conversion rate between ε-caprolactone (CL) and γ-(carbamic acid benzyl ester)-ε-caprolactone (CABCL) and the detailed deprotection condition were studied. The thermal property of the copolymer was analyzed by WAXR and differential scanning calorimetry (DSC), which demonstrated that the thermal property could be well adjusted. The pH-responsive behavior of the copolymers was studied in detail by dynamic light scattering (DLS), pH titration, and pyrene fluorescence methods, which indicated that it could form micelles and exhibit pH responsibility. Moreover, the copolymer was nontoxic and had good biocompatibility according to the results by 3-(4,5)-dimethylthiahiazo (-z-y1)-3,5-di-phenytetrazoliumromide (MTT) assay.     

Solubility of naphthalene in aqueous solutions of poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) triblock copolymers and (2-hydroxypropyl)cyclodextrins

The solubility of naphthalene was investigated in aqueous solutions of triblock copolymers poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) (PEG–PPG–PEG) and (2-hydroxypropyl)cyclodextrins. The results with solutions of the individual solubilizers were as expected: the solubility enhancement was much higher with a micelle-forming copolymer than with the non-micellizing one and with (2-hydroxypropyl)--cyclodextrin (HPBCD) than with (2-hydroxypropyl)--cyclodextrin (HPACD). Although the formation of inclusion complexes between HPACD and PEG and between HPBCD and PPG is well established, the naphthalene solubility in mixed solutions does not significantly deviate from that predicted for a mixture of independent solubilizers. Thus the interactions between HPCD and PEG–PPG–PEG copolymers are not strong enough to disrupt micelles and aggregates formed by those copolymers. In fact, slight synergetic deviations were observed with the micellizing copolymer, indicating the existence of ternary naphthalene/HPCD/copolymer interactions. For pharmaceutical applications, it is important that the solubilization efficacy of PEG–PPG–PEG copolymers and that of cyclodextrins modified by the 2-hydroxypropyl group would not be compromised if these two types of solubilizers were co-administered.     

Selective assembly of cyclodextrins on poly(ethylene oxide)–poly(propylene oxide) block copolymers

This paper presents a computational study on the formation of a molecular necklace formed by specific threading of cyclodextrins (CDs) on block copolymers. Structural as well as energetic principles for the selective complexation of - and -cyclodextrin with poly(ethylene oxide)–poly(propylene oxide) block copolymers (PEO–PPO) are elucidated considering a diblock copolymer of equimolecular composition (PEO)4–(PPO)4 as guest. A non-statistical distribution of CDs, i.e. -CDs primarily located on the PEO chain and -CDs on PPO blocks of the polymer, is based on a variety of structural features and energetic preferences considering both potential as well as solvation energies. This selectivity becomes already obvious considering 1:1 complexes between PEO and PPO monomers and the two CDs, but is increasingly evident when calculating higher order ensembles. Besides the host–guest interaction, docking between CDs themselves is an important, also non-statistical, prerequisite for the self-assembly of highly ordered tubes. The formation of intermolecular hydrogen bonds between adjacent CDs in a tubular aggregate gives an important contribution to the overall stability of the molecular necklace. The net effect, based on the preferential interaction between host and guest as well as between the host molecules themselves, results in the formation of a stable, highly ordered macromolecular, multicomponent aggregate.     

Chemical–physical behavior of hydrogels of poly(vinyl alcohol) and poly(ethylene glycol)

New hydrogels based on polyethylene glycol (PEG) and poly(vinyl alcohol) (PVA) of different degrees of hydrolysis were synthesized. To form the network the PEG was modified at their ends with acyl chloride groups to be used as the crosslinking agent. The compositions of the hydrogels were between 50% and 90% by weight of PEG and PVA of various degrees of hydrolysis were used. It was found that the degree of hydrolysis of the PVA and the PEG content influence the equilibrium water content of the hydrogel. The process of swelling of all the hydrogels prepared followed a second-order kinetics.     

Biodegradable star-shaped poly(ethylene glycol)-poly(β-amino ester) cationic pH/temperature-sensitive copolymer hydrogels

Biodegradable star-shaped copolymers comprised of four-arm poly(ethylene glycol) (4-arm PEG) and poly(β-amino ester) (PAE) were synthesized by conjugating PAE to 4-arm PEG. The synthesized copolymers were characterized by ¹H and ¹³C NMR and gel permeation chromatography. The PAE showed pH/temperature-sensitive properties in an aqueous solution. The copolymer solutions (30 wt.%) showed a gel-to-sol phase transition as a function of temperature in the pH range 7.2–7.8. The gel window covers the physiological conditions (37 °C and pH 7.4) and can be controlled by varying the PAE block length, copolymer solution concentration and PEG molecular weight. After a subcutaneous injection of the copolymer solution into a SD rat, a gel formed rapidly in situ which remained for more than 2 weeks in the body. This copolymer is expected to be a potential candidate for biomedical applications.     

Efficient gene transfection of suspension cells by highly branched poly(β-amino ester)

Suspension cells play a crucial role in many biological processes. However, compared to adherent cells, it is particularly challenging to introduce exogenous genes into suspension cells to regulate their biological functions with non-viral gene vectors, mainly due to the low cellular uptake and endosomal escape of polyplexes. Herein, to improve the interactions of polyplexes with cellular membranes, we design and synthesize highly branched poly(β-amino ester) (HPAE) via an “A2 + B4 + C2” Michael addition strategy. Results show that branching significantly increases DNA condensation of HPAE, cellular uptake and endosomal escape of HPAE/DNA polyplexes. In mast cells (MCs), HPAE exhibits up to 80-fold higher gene transfection efficiency compared to the corresponding linear poly(β-amino ester) (LPAE) and the leading commercial gene transfection reagents PEI25k, jetPEI, and Lipofectamine 3000, without causing obvious cytotoxicity. Our study establishes a reliable non-viral platform for efficient gene transfection of suspension cells.     

Microbial production of natural poly amino acid

Three kinds of poly amino acids, poly-γ-glutamic acid, poly(ε-L-lysine) and multi-L-arginyl-poly (L-aspartic acid) can be synthesized by enzymatic process independently from ribosomal protein biosynthesis pathways in microorganism. These biosynthesized polymers have attracted more and more attentions because of their unique properties and various applications. In this review, the current knowledge on the biosynthesis, biodegradations and applications of these three poly amino acids are summarized.     

Enzymatic hydrolysis by Humicola lanuginosa lipase of poly(lactic acid)–poly(glycolic acid) monolayers

 The enzymatic hydrolysis by Humicola lanuginosa lipase (HLL) of spread insoluble monolayers of poly (α-hydroxy acid)s with various molecular weights and various lactic–glycolic molar ratios was studied using a barostat surface balance. The interfacial hydrolysis under enzyme action leads to the progressive fragmentation of the polymer molecules. The appearance at the interface of charged insoluble fragments was detected by measuring the surface potential, while the solubilization of the small soluble fragments was detected by measuring the decrease in the surface area. The data obtained were used to test the mode of fragmentation: either random or chain-end scission. The catalytic specific activity of HLL was estimated in the framework of the random scission model and compared with the activities obtained for the hydrolysis of simple molecules of di- and tri-glycerides organized as monolayers or emulsion. Received: 9 August 1999 Accepted: 4 January 2000     

Shape-memory poly(p-dioxanone)–poly(ε-caprolactone)/sepiolite nanocomposites with enhanced recovery stress

Shape-memory poly(p-dioxanone)–poly(e-caprolactone)/sepiolite(PPDO–PCL/OSEP) nanocomposites with different OSEP nanofiber loading were fabricated by chain-extending the PPDO-diol and PCL/OSEP precursors. The precursors and the composites were characterized by1 H NMR, FT-IR, GPC, SEM and TEM.The results demonstrate that a part of PCL segments grafted on the surface of OSEP and composites display a fine dispersion of OSEP fiber in nanoscale with low OSEP content. The shape memory effect(SME) was evaluated by DMA, the results reveal that the PPDO–PCL/OSEP nanocomposites exhibit desirable shape-memory performance. The reinforcement of composites by incorporation of trace OSEP nanofiber evokes an effective improvement in shape-memory recovery stress.     

Hydrophilic films based on poly(acrylic acid)–poly(vinyl methyl ether) blends cross-linked by gamma-radiation

Hydrophilic polymeric films based on blends of poly(acrylic acid) and poly(vinyl methyl ether) (PVME) were prepared by casting technique and were cross-linked by gamma-radiation. The films are soft and elastic in a dry state and form hydrogels upon immersion in water. Effect of absorbed dose on the gel fraction as well as on the swelling of the films in aqueous solutions of different pH is studied. It was found that addition of lower molecular weight PVME decreases the gelation dose, which is likely related to a decrease in glass transition temperature of the blends. In acidic media the films have low swelling degree because of suppression of carboxylic groups ionisation and formation of additional physical cross-links via interpolymer hydrogen bonding.     

Poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene)oxide triblock copolymers at the water/air interface and in foam films

The behavior of commercial poly(ethylene oxide)(PEO)–poly(propylene oxide)(PPO)–PEO triblock copolymers at the water/air interface and in microscopic foam films is studied. In aqueous solution these amphiphilic nonionic substances exhibit a surfactant-like aggregation and adsorption behavior. Even below the critical micelle concentration (cmc) the surface concentration is so high that the PEO chains are squeezed and protrude into the solution in order to accommodate to the situation at the interface. As evidenced by measurements of the ellipticity of light reflected from the free surface of the solution a PEO brush is created at the fluid interface. The microscopic foam film is used as a tool for investigating the normal interaction between two PEO brushes facing each other. Stable foam films are obtained at concentrations below the cmc and steric repulsion predominates (in 0.1 M NaCl). A brush-to-brush contact is established only at higher capillary pressures and the disjoining pressure isotherm follows de Gennes' scaling prediction. At lower pressure a softer steric repulsion occurs. It is governed by the bulk copolymer concentration and hence is fundamentally different from the brush-to-brush repellency. On the whole PEO–PPO–PEO copolymers behave as nonionic surfactants, but the large size of their molecules exemplifies the excluded-volume features. Received: 13 July 1999/Accepted: 27 July 1999     

Small-angle X-ray scattering study of a poly(oxyphenylethylene)–poly(oxyethylene) diblock copolymer gel under shear flow

 The structure and flow behaviour of a micellar “cubic” phase is studied, using small-angle X-ray scattering (SAXS) and constant stress rheometry on a poly(oxyphenylethylene)–poly(oxyethylene) diblock copolymer in water. The predominant structure is a face-centred cubic (fcc) array of spherical micelles, which under shear undergoes layer sliding to give a scattering pattern from stacked hexagonal close-packed layers. A detailed analysis of the SAXS data indicates the presence of a fraction of grains with a structure distorted from a fcc phase. The additional reflections that characterize this structure can be indexed to a rhombohedral unit cell, space group R3ˉm, with the same volume as the fcc unit cell. The rhombohedral unit cell corresponds to a cubic cell that has been “stretched” along a [111] direction, and it is suggested that such a structure results from the gradient in shear velocity in the Couette cell employed. Shearing at high shear rates leads to a “smearing out” of the reflections, but upon cessation of shear under these conditions a highly oriented SAXS pattern is obtained, which confirms the persistence of rhombohedral ordering. The shear-induced changes in orientation are correlated to a plateau observed in the stress plotted against shear rate, such a plateau being a sign of inhomogeneous flow. Received: 8 September 2000 Accepted: 29 November 2000     

Polyurethane–poly(vinylidene fluoride) (PU–PVDF) thin film composite membranes for gas separation

Aqueous polyurethane dispersions (PUDs) with poly(dimethylsiloxane) (PDMS), or mixed poly(dimethylsiloxane)/poly(ethylene glycol) (PDMS/PEG) as the soft segment were synthesized, and made into thin films for characterization with differential scanning calorimetry (DSC), thermogarvimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), size exclusion chromatography (SEC) and transmission electron microscopy (TEM). Seven thin film composite (TFC) membranes prepared on PUDs and PVDF substrates were evaluated by the separation of air as well as hydrocarbon–nitrogen mixtures. A promising membrane was then selected for further investigation of the morphological structure and permselectivities, using pure gases and binary mixtures of ethylene, ethane, propylene and propane with nitrogen at ambient temperature. It was found that PDMS/PEG-based PU membrane was typically solubility-selective for condensable hydrocarbons, and nitrogen permeance was marginally enhanced in hydrocarbon–nitrogen mixtures. It appears that the copolymer membrane with both urethane and PEG segments can effectively tolerate the swelling caused by the condensable gases. As a result, the selectivities of propylene and propane to nitrogen were substantially improved, e.g., in a mixture containing 28% propylene and 72% nitrogen, the selectivity of propylene to nitrogen reached 29.2 with a propylene permeance of 34.4 gas permeation unit (GPU).