邻甲基取代杂萘联苯型聚芳酰胺的合成与性能

二氮杂萘酮;物理性能;邻甲基取代杂萘联苯型聚芳酰胺的合成与性能     

新型苯基取代杂萘联苯型聚芳醚的合成与性能

二氮杂萘酮;耐热性;溶解性;新型苯基取代杂萘联苯型聚芳醚的合成与性能     

新型氯取代含杂萘联苯结构可溶性聚芳酰胺的合成、表征和性能

以类双酚单体4-(3-氯-4-羟基-苯基)-2H-二氮杂萘-1-酮(DHPZ-OC)和对氯苯腈为原料进行亲核取代反应合成二腈化合物4-[3-氯-4-(4-氰基苯氧基)苯基]-2-(4-氰基苯基)二氮杂萘-1-酮(),然后在碱性(KOH)条件下进行水解制得了一种新型的含氯取代杂萘联苯结构的芳香二酸,4-[3-氯-4-(4-羧基苯氧基)苯基]-2-(4-羧基苯基)二氮杂萘-1-酮().用新二酸与各种芳香二胺进行直接缩合聚合制得了一系列新型氯取代含杂萘联苯结构的聚芳酰胺,特性粘度可达1.23dL/g.用FTIR和¹HNMR研究了新型二酸单体及聚合物的结构.该类聚芳酰胺均可溶解于NMP,DMAc和DMSO等极性有机溶剂中,并且可浇铸成透明韧性膜,其玻璃化转变温度在291～332℃之间,10%的热失重温度在460℃以上.     

杂萘联苯共聚醚砜的非均相磺化

以杂萘联苯共聚醚砜(PPHES)为原料,氯仿为溶剂,浓硫酸为磺化试剂,采用非均相磺化法对PPHES进行了磺化改性,得到了一系列不同磺化度的磺化杂萘联苯共聚醚砜(SPPHES).考察了浓硫酸浓度、磺化反应温度和时间等工艺条件对产物磺化度的影响.利用FT-IR、1H-NMR对SPPHES进行了表征.结果表明,磺酸基已成功引...     

含二氮杂萘酮结构聚芳酰胺超滤膜的研制

膜性能;含二氮杂萘酮结构聚芳酰胺超滤膜的研制     

含3,5-二甲基二氮杂萘酮联苯结构聚醚酰亚胺的合成与性能

由4-[(3,5-二甲基-4-羟基)苯基]-2,3-杂萘-1-酮与4-氯-N-苯基邻苯酰亚胺通过亲核取代反应、水解反应和脱水反应合成了一种新型不对称含二氮杂萘联苯结构的二酐单体,并对其进行结构表征.由新型二酐单体与市售的二胺单体通过“一步法”溶液聚合反应合成了5种含二氮杂萘酮联苯结构的聚醚酰亚胺.通过FTIR和¹HNMR方法研究了聚合物的结构及性能.结果表明,该类聚合物既具有较高的耐热性能,又可以在室温下溶解于非质子极性溶剂,如N-甲基吡咯烷酮和间甲酚等.     

含联苯二氮杂萘酮结构聚芳酰胺的合成与表征

用类双酚单体4[4(4羟基苯基)苯基]2H二氮杂萘1酮(DHPZpP)与对氯苯腈进行亲核取代反应后碱性水解合成一种扭曲、非共平面杂环芳香二酸,4{4[4(4羧基苯氧基)苯基]苯基}2(4羧基苯基)二氮杂萘1酮(2).由二酸2和各种芳香二胺进行膦酰化缩聚反应制得了一系列的含联苯二氮杂萘酮结构聚芳酰胺,其特性粘数在0.42～0.72dLg之间.该类聚芳酰胺均可溶解于NMP、DMAc和DMSO等极性有机溶剂中,并且可用DMAc为溶剂制成具有良好机械性能的透明聚合物薄膜,聚合物薄膜的拉伸强度为80～89MPa.该类聚芳酰胺具有优异的耐热性,玻璃化转变温度Tg在298～328℃之间,10%的热失重温度(Td)在470℃以上.     

含二氮杂萘酮联苯结构热塑性聚芳醚树脂基复合材料研究进展

含二氮杂萘酮联苯结构聚芳醚是一类综合性能优异的耐高温热塑性树脂,可采用多种方式加工成型。与传统聚芳醚相比,具有低成本、优异的高温力学性能和良好的溶解性等优势,可作为基体树脂应用于制备复合材料。本文主要介绍了近几年在含二氮杂萘酮联苯结构热塑性聚芳醚树脂基复合材料方面的研究进展,包括玻璃纤维增强复合材料、碳纤维增强复合材料...     

芴-氮杂萘酮-聚芳醚酮离聚物的合成与性能

以双酚芴、双酚A型二氮杂萘酮、二氟二苯酮和二氟二苯酮磺酸钠为原料, 通过调整4种单体的比例以及加料顺序控制缩聚反应, 制备了一系列具有不同离子交换容量的含芴和二氮杂萘酮联苯单元的嵌段聚芳醚酮, 简称芴-氮杂萘酮-聚芳醚酮离聚物. 采用黏度测试、傅里叶衰减全反射红外光谱(FTIR-ATR)、氢谱(1H NMR)和热失重(TGA)等分析方法, 对不同结构的芴-氮杂萘酮-聚芳醚酮离聚物的分子量、结构及热稳定性进行了表征. 实验结果表明, 采用控制缩聚法能够制备出不同离子交换容量的高分子量芴-氮杂萘酮-聚芳醚酮离聚物, 该系列离聚物具有良好的热稳定性. 对该系列离聚物膜进行了抗氧化性、水解稳定性、吸水率、耐醇性、离子交换容量和质子传导率测试. 测试结果表明, 该系列离聚物具有良好的抗氧化性、水解稳定性、耐醇性、质子传导率和适当的吸水率.     

1-肼基-2,3-二氮杂萘盐酸盐的合成新方法

研究了l-肼基-2,3-二氮杂萘盐酸盐的合成新方法.以相对廉价易得的邻苯二甲酸酐为起始原料,依次通过还原、溴代、环合、取代、酸化等反应步骤得到目标产物1-肼基-2,3-二氮杂萘盐酸盐.研究表明该方法具有原料便宜易得、收率高、产物易分离纯化、后处理操作简单、总成本低等优点.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.