Superfluorinated Ionic Liquid Crystals Based on Supramolecular,Halogen‐Bonded Anions

Unconventional ionic liquid crystals in which the liquid crystallinity is enabled by halogen‐bonded supramolecular anions [C_nF_{2 n+1}‐I⋅⋅⋅I⋅⋅⋅I‐C_nF_{2 n+1}]⁻ are reported. The material system is unique in many ways, demonstrating for the first time 1) ionic, halogen‐bonded liquid crystals, and 2) imidazolium‐based ionic liquid crystals in which the occurrence of liquid crystallinity is not driven by the alkyl chains of the cation.     

Superfluorinated Ionic Liquid Crystals Based on Supramolecular,Halogen‐Bonded Anions

Unconventional ionic liquid crystals in which the liquid crystallinity is enabled by halogen‐bonded supramolecular anions [C_nF_{2 n+1}‐I???I???I‐C_nF_{2 n+1}]^? are reported. The material system is unique in many ways, demonstrating for the first time 1) ionic, halogen‐bonded liquid crystals, and 2) imidazolium‐based ionic liquid crystals in which the occurrence of liquid crystallinity is not driven by the alkyl chains of the cation.     

Rate constants and conversion ratios for aqueous‐phase reactions of SO with CnF2n+1C(O)O− (n = 4–7) at 298 K

Kinetic data for aqueous‐phase reactions of sulfate anion radicals (SO) with perfluorocarboxylates (C_nF_2n+1C(O)O^?) are needed to evaluate removal and transformation processes of C_nF_2n+1C(O)O^? species in the environment, but rate constants for the reactions of SO with C_nF_2n+1C(O)O^? (k_n) have been reported only for short‐chain C_nF_2n+1C(O)O^? species (n = 1–3). Since C_nF_2n+1C(O)O^? reacted with SO to form C_mF_2m+1C(O)O^? (m < n), we determined relative rates k_n?1/k_n for the reactions of SO with C_nF_2n+1C(O)O^? (n = 4–7), along with conversion ratios for conversion of C_nF_2n+1C(O)O^? into C_n?1F_2n?1C(O)O^? (α_n) and into C_n?2F_2n?3C(O)O^? (β_n) at 298 K. SO was photolytically generated from S₂O by use of sunlamps (λ ≈ 310 nm). Even if k_n and k_n?1 change with increasing ionic strength, k_n?1/k_n can be determined when k_n?1/k_n and α_n remain almost constant during the reaction. The values of k_n/k₁ for n = 4–7 were nearly equal, and their average was 0.82 ± 0.04 (2σ). Conversion ratios of α_n and β_n were mostly independent of n for n = 4–7, and their averages were 0.77 ± 0.07 (2σ) and 0.13 ± 0.08, respectively. Branching ratios of reactions of a possible intermediate (C_nF_2n+1O^?), reaction of C_nF_2n+1O^? with H₂O, and fission of the C? C bond of C_nF_2n+1O^?, seemed to determine α_n and β_n. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 735–747, 2009     

Benzylic C(sp3)?H Perfluoroalkylation of Six‐Membered Heteroaromatic Compounds

Successful benzylic C(sp³) H trifluoromethylation, pentafluoroethylation, and heptafluoropropylation of six‐membered heteroaromatic compounds were achieved as the first examples of a practical benzylic C(sp³) H perfluoroalkylation. In these reactions, BF₂C_nF_2n+1 (n=1–3) functioned as both a Lewis acid to activate the benzylic position and a C_nF_2n+1 (n=1–3) source. The perfluoroalkylation proceeded at both terminal and internal positions of the alkyl chains. Perfluoroalkylated products were obtained in moderate to excellent yields, even on gram scale, and in a sequential procedure without isolation of the intermediates. By using this method, trifluoromethylation of a bioactive compound, as well as introduction of a CF₃ group into a bioactive molecular skeleton, proceeded regioselectively.     

Benzylic C(sp3)H Perfluoroalkylation of Six‐Membered Heteroaromatic Compounds

Successful benzylic C(sp³)? H trifluoromethylation, pentafluoroethylation, and heptafluoropropylation of six‐membered heteroaromatic compounds were achieved as the first examples of a practical benzylic C(sp³)? H perfluoroalkylation. In these reactions, BF₂C_nF_2n+1 (n=1–3) functioned as both a Lewis acid to activate the benzylic position and a C_nF_2n+1 (n=1–3) source. The perfluoroalkylation proceeded at both terminal and internal positions of the alkyl chains. Perfluoroalkylated products were obtained in moderate to excellent yields, even on gram scale, and in a sequential procedure without isolation of the intermediates. By using this method, trifluoromethylation of a bioactive compound, as well as introduction of a CF₃ group into a bioactive molecular skeleton, proceeded regioselectively.     

Polyfluoroorganoboron‐Oxygen Compounds. 5 Feasible Routes to Perfluoroalkyltrimethoxyborates M[CnF2n+1B(OMe)3] (n ≥ 3)

A well applicable preparative method for lithium perfluoroalkyltrimethoxyborates, Li[C_nF_2n+1B(OMe)₃] (n = 3, 4, 6), was elaborated which is based on the reaction of B(OMe)₃ with C_nF_2n+1Li generated from C_nF_2n+1H and t‐BuLi. Alternative perfluoroalkylation reactions of B(OMe)₃ with perfluoropropyllithium generated from C₃F₇I and RLi, perfluoropropylmagnesium bromide, or perfluoropropyltrimethylsilane and potassium fluoride gave less satisfactory results for M[C₃F₇B(OMe)₃]. The conversion of M[C_nF_2n+1B(OMe)₃] salts (M = Li, BrMg) into K[C_nF_2n+1B(OMe)₃] salts and basic properties of the new salts are reported.     

Synthesis and Reactivity of New Functionalized Perfluoroalkylfluorophosphates

A new efficient synthesis of functionalized perfluoroalkyl fluorophosphates by oxidative addition of Me₂NCH₂F to the electron‐deficient phosphanes (C₂F₅)_nPF_3?n (n=0–3) is reported. The initially formed zwitterionic, hexacoordinated phosphates [(C₂F₅)_nF_5?nP(CH₂NMe₂?CH₂NMe₂)] are converted into the corresponding phosphonium salts [(Me₃PCH₂NMe₂]⁺[(C₂F₅)_nF_5?nP(CH₂NMe₂)]^? by treatment with PMe₃. In addition [(C₂F₅)₃F₂P(CH₂NMe₂?CH₂NMe₂)] can undergo a 1,3‐methyl shift from the internal to the terminal nitrogen—a structural characterization was achieved from the CF₃ analogue. Reaction of [(C₂F₅)₃F₂P(CH₂NMe?CH₂NMe₃)] and PMe₃ gave rise to the formation of the zwitterionic phosphonium phosphate [(C₂F₅)₃F₂P(CH₂NMe?CH₂PMe₃)], which was fully characterized by X‐ray diffraction analysis. Moreover, an efficient one‐pot synthesis of Cs⁺[(C₂F₅)₃F₂P(CH₂NMe₂)]^? was pursued. This salt turned out to be a useful nucleophile in several alkylation reactions.     

Reactions of pentafluorophenylgermanium hydrides with Grignard reagents

Dendritic and cross-linked polyphenylenepolygermanes have been obtained by reactions of EtMgBr with (C₆F₅)₃GeH and (C₆F₅)₂GeH₂, respectively. The reaction of sodium naphthalenide with trihydride C₆F₅GeH₃ gives linear insoluble polymer (C₆F₄GeH₂) _n .Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 191–193, January, 1996.     

The dark reactions F2 + CF3I,C2F5I,and n-C3F7I

The reactions between F₂ and the lowest members of the homologous series of perfluoroalkyl iodides (CF₃I, C₂F₅I, and n-C₃F₇I) have been studied. For these compounds, an exponential decrease in the alkyl iodide concentration over time following an induction period is observed for certain experimental conditions. Other conditions lead to chaotic-like kinetic behavior where the rate of alkyl iodide consumption continually changes. Kinetic rate data with CF₃I show that the disappearance rate depends upon both the type of surface and surface preparation. For all three compounds, Arrhenius plots reveal activation energies on the order of 10 kcal/mol, consistent with effective initiation steps of F₂ + RI → RIF + F, where R represents the CF₃, C₂F₅, or n-C₃F₇ radical respectively. The end products of the F₂ + RI reactions are RF, R₂, and IF₅, suggesting that the R radicals play an important kinetic role. Introducing O₂ into the F₂ + RI reaction systems results in successive oxidation of R by O₂, leading to the formation of CF₂O as an additional end product. IF(B → X) emission is observed from the RI-rich F₂ + RI reactions, confirming the existence of IF as an intermediate. © 1996 John Wiley & Sons, Inc.     

Reactions of methyl(pentafluorophenyl)- and methyl(pentafluorophenyl)phenylsilanes with electrophiles. A convenient preparative route to halogeno(methyl)pentafluorophenylsilanes C6F5SiMe2X and C6F5SiMeX2 (X=F, Cl and Br)

Halogeno(methyl)pentafluorophenylsilanes C₆F₅SiMe_nX_3−n (n=1, 2) (X=F, Cl, Br) were prepared in good yields from the corresponding phenylsilanes C₆F₅SiMe_nPh_3−n by reactions with the electrophiles aHF, HCl–AlCl₃, Br₂–AlBr₃ or AlX₃ (X=Cl, Br) halogenated hydrocarbons. Additionally, reactions of C₆F₅SiMe₃ and (C₆F₅)₂SiMe₂ with selected electrophiles were studied.     

Cationic–anionic fluorinated surfactant mixtures based on short fluorocarbon chains as potential aqueous film-forming foam

A strategy for aqueous film-forming foam (AFFF) using cationic-anionic surfactant mixtures with short fluorocarbon chains (≤C₄) in both cationic and anionic surfactants was proposed. The minimum surface tension (γ_min) of mixtures of C₄F₉SO₂NH(CH₂)₃N(CH₃)₃I (C₄FI) and C_nF_2n+1COONa (n?=?1, 2, 3, 4) with different molar ratios (5:1, 2:1, 1:1, 1:2, 1:5) was measured at 25?°C. The γ_min for all mixtures of C₄FI–C_nF_2n+1COONa were remarkably lower than that of pure C₄FI. Among these mixtures, the equimolar mixture of C₄FI–C₃F₇COONa was chosen because of the low γ_min, qualified solubility and relatively high fluorine efficiency. The spreading coefficients of its aqueous solution on n-heptane, toluene, benzene, cyclohexane and gasoline were all positive, indicative of its potential in AFFF. The film spreading, sealability and foaming were also tested. The influences of ‘green’ additives (alkyl glucose amide, xanthan gum and sodium carboxymethylcellulose) on foaming performance were studied, in which small dosage of xanthan gum could greatly retard the drainage of foam. It was confirmed that the mixing of oppositely charged surfactants both possessing short fluorocarbon chains was a valuable thought to design AFFF. In application, the quaternary ammonium surfactant likewise can be bromide or chloride rather than iodide for reasons of cost-reduction and stability.     

Mechanistic Studies on the Gas‐Phase Dehydrogenation of Alkanes at Cyclometalated Platinum Complexes

In the ion/molecule reactions of the cyclometalated platinum complexes [Pt(L? H)]⁺ (L=2,2′‐bipyridine (bipy), 2‐phenylpyridine (phpy), and 7,8‐benzoquinoline (bq)) with linear and branched alkanes C_nH_2n+2 (n=2–4), the main reaction channels correspond to the eliminations of dihydrogen and the respective alkenes in varying ratios. For all three couples [Pt(L? H)]⁺/C₂H₆, loss of C₂H₄ dominates clearly over H₂ elimination; however, the mechanisms significantly differs for the reactions of the “rollover”‐cyclometalated bipy complex and the classically cyclometalated phpy and bq complexes. While double hydrogen‐atom transfer from C₂H₆ to [Pt(bipy? H)]⁺, followed by ring rotation, gives rise to the formation of [Pt(H)(bipy)]⁺, for the phpy and bq complexes [Pt(L? H)]⁺, the cyclometalated motif is conserved; rather, according to DFT calculations, formation of [Pt(L? H)(H₂)]⁺ as the ionic product accounts for C₂H₄ liberation. In the latter process, [Pt(L? H)(H₂)(C₂H₄)]⁺ (that carries H₂ trans to the nitrogen atom of the heterocyclic ligand) serves, according to DFT calculation, as a precursor from which, due to the electronic peculiarities of the cyclometalated ligand, C₂H₄ rather than H₂ is ejected. For both product‐ion types, [Pt(H)(bipy)]⁺ and [Pt(L? H)(H₂)]⁺ (L=phpy, bq), H₂ loss to close a catalytic dehydrogenation cycle is feasible. In the reactions of [Pt(bipy? H)]⁺ with the higher alkanes C_nH_2n+2 (n=3, 4), H₂ elimination dominates over alkene formation; most probably, this observation is a consequence of the generation of allyl complexes, such as [Pt(C₃H₅)(bipy)]⁺. In the reactions of [Pt(L? H)]⁺ (L=phpy, bq) with propane and n‐butane, the losses of the alkenes and dihydrogen are of comparable intensities. While in the reactions of “rollover”‐cyclometalated [Pt(bipy? H)]⁺ with C_nH_2n+2 (n=2–4) less than 15 % of the generated product ions are formed by C? C bond‐cleavage processes, this value is about 60 % for the reaction with neo‐pentane. The result that C? C bond cleavage gains in importance for this substrate is a consequence of the fact that 1,2‐elimination of two hydrogen atoms is no option; this observation may suggest that in the reactions with the smaller alkanes, 1,1‐ and 1,3‐elimination pathways are only of minor importance.     

Friedel–Crafts Type Methylation with Dimethylhalonium Salts

The dimethylchloronium salt [Me₂Cl][Al(OTeF₅)₄] is used to methylate electron-deficient aromatic systems in Friedel–Crafts type reactions as shown by the synthesis of N-methylated cations, such as [MeNC₅F₅]⁺, [MeNC₅F₄I]⁺, and [MeN₃C₃F₃]⁺. To gain a better understanding of such fundamental Friedel–Crafts reactions, the role of the dimethylchloronium cation has been evaluated by quantum-chemical calculations.     

Gas‐phase fluorine migration reactions in the radical cations of pentafluorosulfanylbenzene (Aryl―SF5) and benzenesulfonyl fluoride (Aryl―SO2F) derivatives and in the 2,5‐xylylfluoroiodonium ion

The gas‐phase reactions of Aryl―SF₅^·+ and Aryl―SO₂F^·+ have been studied with the electron ionization tandem mass spectrometry. Such reactions involve F‐atom migration from the S‐atom to the aryl group affording the product ion Aryl―F^·+ by subsequent expulsion of SF₄ or SO₂, respectively. Especially, the 4‐pentafluorosulfanylphenyl cation 4‐SF₅C₆H₄⁺ (m/z 203) from 4‐NO₂C₆H₄SF₅^·+ by loss of ·NO₂ could occur multiple F‐atom migration reactions to the product ion C₆H₄F₃⁺ (m/z 133) by loss of SF₂ in the MS/MS process. The gas‐phase reactions of 2,5‐xylylfluoroiodonium (pXyl―I⁺F, m/z 251) have also been studied using the electrospray tandem mass spectrometry, which involve a similar F‐atom migration process from the I‐atom to the aryl group giving the radical cation of 2‐fluoro‐p‐xylene (or its isomer 4‐fluoro‐m‐xylene, m/z 124) by reductive elimination of an iodine atom. All these gas‐phase F‐atom migration reactions from the heteroatom to the aryl group led to the aryl―F coupling product ions with a new formed C_Aryl―F bond. Density functional theory calculations were performed to shed light on the mechanisms of these reactions. Copyright © 2014 John Wiley & Sons, Ltd.     

Pentafluorphenyliod(III)-Verbindungen. 2. Fluor-Aryl Substitution an Iodtrifluorid: Synthese von Pentafluorphenylioddifluorid C6F5IF2 und Bis(pentafluorphenyl)iodonium Pentafluorphenylfluoroboraten [(C6F5)2I]+[(C6F5)nBF4−n]−

Pentafluorophenyliodine(III) Compounds. 2. Fluorine-Aryl Substitution Reactions on Iodinetrifluoride: Synthesis of Pentafluorophenyliodinedifluoride C₆F₅IF₂ and Bis(pentafluorophenyl)iodonium Pentafluorophenylfluoroborates[(C₆F₅)₂I]⁺[(C₆F₅)_nBF_4?n]^? Mono- and disubstitution can be achieved in the fluorine-aryl substitution reaction on the low-temperature phase IF₃ in CH₂Cl₂ at ?78°C depending on the aryl transfer reagent. With B(C₆F₅)₃ [(C₆F₅)₂I]⁺ [(C₆F₅)_nBF_4?n]^? (68% yield) and with Cd(C₆F₅)₂ C₆F₅IF₂ (97% yield) is obtained whereas with C₆F₅SiMe₃ no fluorine-aryl substitution takes place on IF₃ even under basic conditions (EtCN or F^? addition). At ?78°C in EtCN solution IF₃ does not disproportionate but attacks the solvent under formation of HF.     

[(C6F5)2IF2][BF4], the First Salt with the Electrophilic Cation [(C6F5)2IF2]+: Synthesis,Reactivity, and Structure

The substitution of hypervalently bonded fluorine atoms in C₆F₅IF₄ was performed with C₆F₅BF₂ and resulted in the new salt [(C₆F₅)₂IF₂][BF₄]. The iodonium(V) salt was characterized by multi‐NMR and Raman spectroscopy and X‐ray crystal structure analysis. The fluorinating ability of the new electrophilic cation [(C₆F₅)₂IF₂]⁺ was exemplified in reactions with monovalent iodine compounds (C₆F₅I, p‐FC₆H₄I, and I₂) and with electron‐poor tri(organyl)pnictanes ER₃ (E = P, As, Sb, Bi; R = C₆F₅). In a heterogeneous reaction with CsF in MeCN the [(C₆F₅)₂IF₂]⁺ cation forms the dinuclear [{(C₆F₅)₂IF₂}₂F]⁺ cation.     

Kinetics of the iodine transfer polymerization of vinylidene fluoride

The kinetics of the iodine transfer polymerization (ITP) of vinylidene fluoride (VDF) was achieved in the presence of three different chain‐transfer agents (CTAs): 1‐iodoperfluorohexane (C₆F₁₃I), 1‐iodo‐2H,2H‐perfluorooctane (C₆F₁₃CH₂CF₂I), and 1,1,2,2‐tetrafluoro‐3‐iodopropane (HCF₂CF₂CH₂I). ITPs of VDF carried out in the presence of C₆F₁₃I and C₆F₁₃CH₂CF₂I showed the following: (1) a linear increase in DP_n versus α_VDF, which evidenced the controlled character of ITP, although the polydispersity indices were slightly high (ca 1.5), and (2) theoretical DP_n values close to the targeted ones. In contrast, neither of these statements was observed for the ITP of VDF in the presence of HCF₂CF₂CH₂I achieved under the same conditions, even if the synthesized oligomers could be reactivated. Although the C_Tr values of C₆F₁₃I and C₆F₁₃CH₂CF₂I were close (i.e., 7.7 at 75 °C), that of HCF₂CF₂CH₂I was lower (0.3 at 75 °C). The percentages of ? CF₂I and ? CH₂I functionalities were also assessed, and in the course of the reaction, a reduction of ? CF₂I end groups was noted. Then, the mechanism of the ITP of VDF was proposed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5763–5777, 2006     

Single‐Step Gas‐Phase Polyperfluoroalkylation of Naphthalene Leads to Thermodynamic Products

High‐temperature gas‐phase, solvent‐ and catalyst‐free reaction of naphthalene with an excess of R_FI reagent (R_F?CF₃, C₂F₅, n‐C₃F₇, and n‐C₄F₉) was used for the first time to produce a series of highly perfluoroalkylated naphthalene products NAPH(R_F)_n with n=2–5. Four 95+ % pure 1,3,5,7‐NAPH(R_F)₄ with R_F?CF₃, C₂F₅, n‐C₃F₇, and n‐C₄F₉ were isolated using a simple chromatography‐free procedure. These new compounds were fully characterized by ¹⁹F and ¹H NMR spectroscopy, X‐ray crystallography (for R_F?CF₃ and C₂F₅), atmospheric‐pressure chemical ionization mass spectrometry, and cyclic and square‐wave voltammetry. DFT calculations confirm that the proposed synthesis yields the most stable isomers that have not been accessed by alternative preparation techniques.     

The Propargyl Rearrangement to Functionalised Allyl‐Boron and Borocation Compounds

A diverse range of Lewis acidic alkyl, vinyl and aryl boranes and borenium compounds that are capable of new carbon–carbon bond formation through selective migratory group transfer have been synthesised. Utilising a series of heteroleptic boranes [PhB(C₆F₅)₂ ( 1 ), PhCH₂CH₂B(C₆F₅)₂ ( 2 ), and E‐B(C₆F₅)₂(C₆F₅)C=C(I)R (R=Ph 3 a , nBu 3 b )] and borenium cations [phenylquinolatoborenium cation ([QOBPh][AlCl₄], 4 )], it has been shown that these boron‐based compounds are capable of producing novel allyl‐ boron and boronium compounds through complex rearrangement reactions with various propargyl esters and carbamates. These reactions yield highly functionalised, synthetically useful boron substituted organic compounds with substantial molecular complexity in a one‐pot reaction.     

A mass spectrometry study of alkanes in air plasma at atmospheric pressure

The positive APCI-mass spectra in air of linear (n-pentane, n-hexane, n-heptane, n-octane), branched [2,4-dimethylpentane, 2,2-dimethylpentane and 2,2,4-trimethylpentane (i-octane)], and cyclic (cyclohexane) alkanes were analyzed at different mixing ratios and temperatures. The effect of air humidity was also investigated. Complex ion chemistry is observed as a result of the interplay of several different reagent ions, including atmospheric ions O₂^+•, NO⁺, H₃O⁺, and their hydrates, but also alkyl fragment ions derived from the alkanes. Some of these reactions are known from previous selected ion/molecule reaction studies; others are so far unreported. The major ion formed from most alkanes (M) is the species [M − H]⁺, which is accompanied by M^+• only in the case of n-octane. Ionic fragments of C _n H_2n ^+1/+ composition are also observed, particularly with branched alkanes: the relative abundance of such fragments with respect to that of [M − H]⁺ decreases with increasing concentration of M, thus suggesting that they react with M via hydride abstraction. The branched C₇ and C₈ alkanes react with NO⁺ to form a C₄H₁₀NO⁺ ion product, which upon collisional activation dissociates via HNO elimination. The structure of t-Bu⁺(HNO) is proposed for such species, which is reasonably formed from the original NO⁺(M) ion/molecule complex via hydride transfer and olefin elimination. Finally, linear alkanes C₅–C₈ give a product ion corresponding to C₄H₇⁺(M), which we suggest is attributed to addition of [M − H]⁺ to C₄H₈ olefin formed in the charge-transfer-induced fragmentation of M. The results are relevant to applications of nonthermal plasma processes in the fields of air depuration and combustion enhancement.