弹性圆板的热过屈曲

基于精确的圆薄板轴对称大挠度变形几何方程，建立了均匀加热圆板轴对称热弹性屈曲问题位移形式的控制方程，采用打靶法和解析延拓法获得了连续依赖于温度载荷的圆板过屈曲状态解，给出了相应的数值结果。     

功能梯度材料矩形中厚板的受压/热致屈曲

考虑材料组份沿板厚度方向按幂律变化的情形,研究了温度均匀变化时固支功能梯度材料(FGM)矩形中厚板的受压屈曲、热致屈曲和考虑热/机械预应力时的屈曲问题,给出了基于Reddy高阶剪切理论研究板屈曲荷载和屈曲临界温度的半解析数值方法.并以Si3N4/SUS304板为例考虑了材料组份、预加应力、横向剪切变形及面内位移约束条件等对FGM板屈曲承载能力的影响.     

矩形板屈曲问题的一个小波解

利用Wavelet-Galerkin法分析了四边固支与四边简支矩形板的屈曲问题.以小波作为基函数表示板的挠度,推导出屈曲系数及屈曲模态的计算过程.数值计算给出了不同边长比的矩形板的屈曲系数及屈曲半波数.与传统的三角函数作基函数的Galerkin法及有限元法结果比较,结果表明在一定条件下小波可以作为试函数解决结构力学的屈...     

双向压缩简支矩形板的后屈曲性态

本文从Karman板大挠度方程出发,以挠度为摄动参数,采用直接摄动法,研究了简支矩形板在面内双向压缩作用下的后屈曲性态.本文同时考虑了板初始几何缺陷的影响.计算结果与实验结果的比较表明二者是一致的.     

基于连续支承压杆模型的轴心受压柱局部屈曲分析

轴心受压柱局部屈曲分析,一般根据薄板理论建立板件屈曲微分方程,构造满足边界条件的位移场,获得屈曲临界载荷解析解,不仅推导繁琐且不便直观地揭示受压板件屈曲特征及控制参数。本文建立单位宽度受压板条的连续支承压杆模型,将二维板件屈曲问题转化为学生较熟悉的一维压杆屈曲分析。基于连续支承压杆临界载荷的解析解,方便识别典型非加载边约束下板件屈曲半波数。本文旨在深化理解受压板件屈曲性能。

     

黏弹性板的大挠度蠕变屈曲

研究了具有初始小挠度受轴向压载黏弹性板的蠕变屈曲问题,在建立控制方程时,利用了von Karman非线性应变-位移关系,并考虑了初始挠度,用标准线性固体模型描述材料的黏弹性特性,在求解非线性积分方程时,利用梯形公式计算记忆积分式,将非线性积分方程化为非线性代数方程进行数值求解,得到了结构的蠕变变形过程,又将问题退化到小挠度情况进行研究,得到了挠度随时间扩展的解析解,分析了瞬时失稳临界载荷、持久临界载荷的物理意义,讨论了考虑几何非线性对黏弹性板蠕变屈曲的影响。     

非线性弹性基础上矩形板热后屈曲分析

给出非线性弹性基础上矩形板在均匀和非均匀（抛物型）热分布作用下的后屈曲分析。采用摄动——Ｇａｌｅｒｋｉｎ混合法给出完善和非完善矩形板热屈曲载荷和热后屈曲平衡路径。数值计算结果表明，非线性弹性基础上矩形板具有不稳定的热后屈曲平衡路径，且对初始几何缺陷是敏感的     

含基体横向损伤的黏弹性板的蠕变后屈曲分析

基于Schapery三维黏弹性损伤本构关系,引入沈为和Kachanov损伤演化方程,建立了基体横向损伤的纤维单一方向铺设黏弹性板的损伤模型;应用von Karman板理论,导出了考虑损伤效应的具初始挠度的纤维单一方向铺设黏弹性矩形板的非线性压屈平衡方程. 对未知变量在空间上采用差分法离散,时间上采用增量算法和Newton-Cotes积分法离散,控制方程被迭代求解. 算例中讨论了损伤以及有关参数对黏弹性复合材料板后屈曲行为的影响,且与已有文献的结果进行了比较. 数值结果表明：随着外载荷或者初始挠度的增大,板后屈曲趋于稳定时的挠度就愈大,损伤的影响愈明显;而随着长宽比的增大,板后屈曲趋于稳定时的挠度愈小,损伤的影响却随之增大.     

轴压构件屈曲临界载荷放大系数的研究1)

为了建立一般条件下轴压构件屈曲临界载荷的计算理论,首先对轴心受压构件发生屈曲时的总势能方程进行了推导,然后采用Rayleigh-Ritz法并基于势能驻值原理得到了4种不同端部约束条件下轴压构件的屈曲临界载荷,对比欧拉临界载荷,给出了临界载荷放大系数 的计算式,全面考虑了构件长细比、压缩变形、剪切变形以及截面形状系数对临界载荷的影响,推导的计算式可用于较小长细比轴压构件发生屈曲时临界载荷的计算.圆截面和双轴对称工字形截面轴压构件屈曲临界载荷的分析表明构件长细比是影响放大系数的主导因素。     

功能梯度与均匀圆板静动态解之间的相似转换关系

基于经典板理论,研究了功能梯度材料圆板的轴对称弯曲、屈曲和自由振动解与相应的均匀材料圆板解之间的转换关系.通过消去拉-弯耦合项得到了以挠度函数表示的功能梯度圆板的弯曲、屈曲和自由振动控制方程.分析功能梯度圆板与均匀圆板的控制方程之间的相似性,得到了功能梯度材料圆板与均匀圆板的解之间解的相似转换关系,在假定FGM圆板的材料性质沿厚分别以幂函数和指数函数的度变规律后,给出了相应的转换系数的解析表达式.该系数集中反映了功能梯度圆板的材料非均匀性.在已知均匀材料圆板轴对称解的条件下,可将功能梯度材料圆板轴对称问题的求解转化为相似转换系数的计算问题.这一方法可为非均匀板的求解提供了十分便捷有效的途径,而且便于工程应用.     

Kármán-type equations for a higher-order shear deformation plate theory and its use in the thermal postbuckling analysis

Kármán-type nonlinear large deflection equations are derived occnrding to the Reddy’s higher-order shear deformation plate theory and used in the thermal postbuckling analysis The effects of initial geometric imperfections of the plate areincluded in the present study which also includes th thermal effects.Simply supported,symmetric cross-ply laminated plates subjected to uniform or nomuniform parabolictemperature distribution are considered. The analysis uses a mixed GalerkinGolerkinperlurbation technique to determine thermal buckling louds and postbucklingequilibrium paths.The effects played by transverse shear deformation plate aspeclraio, total number of plies thermal load ratio and initial geometric imperfections arealso studied.     

安全壳中钢衬壳热屈曲问题理论与实验研究(Ⅱ)──实验部分

钢衬壳热屈曲问题是核工程安全壳设计中的主要问题,但实验研究方面的文章发表得不多文中以200兆瓦核电站安全壳中钢衬壳为研究对象,采用局部1：1模型,测得了钢衬壳热屈曲温度和应变载荷,给出了钢衬壳屈曲和初始后屈曲过程中挠度和温度关系、以及膜应变和温度关系,实验测得钢衬壳具有局域屈曲的现象,实验屈曲载荷与理论结果符合较好     

Thermal postbuckling analysis of moderately thick plates

A thermal postbuckling analysis is presented for a moderately thick rectangular plate subjected to (1) uniform and non-uniform tent-like temperature loading; and (2) combined axial compression and uniform temperature loading. The initial geometrical imperfection of plate is taken into account. The formulations are based on the Reissner-Mindlin plate theory considering the effects of rotary inertia and transverse shear deformation. The analysis uses a deflection-type perturbation technique to determine the thermal buckling loads and postbuckling equilibrium paths. Numerical examples are presented that relate to the performances of perfect and imperfect, moderately thick rectangular plates and are compared with the results predicted by the thin plate theory.     

箱形梁剪力滞和剪切效应引起的附加挠度分析

将箱形梁腹板剪切变形纳入初等梁挠曲变形,在全截面上引入剪力滞翘曲修正系数,重新定义了剪力滞翘曲位移模式。选取剪力滞效应引起的附加挠度为广义位移,计算外力势能时考虑剪力滞广义位移的影响,应用能量变分法建立了反映剪力滞和剪切效应的控制微分方程,并导出了均布荷载作用下简支箱梁和两跨连续箱梁剪力滞和剪切效应附加挠度的解析解。数值算例表明,本文方法计算的总挠度值与有限元数值解吻合良好,从而验证了本文方法的合理性。算例箱梁剪切附加挠度明显大于剪力滞附加挠度;简支箱梁跨中截面的剪切和剪力滞附加挠度分别占初等梁挠度的2.50%和1.97%,两跨连续箱梁距中支点9l/16截面分别占27.45%和16.87%。     

考虑全截面剪切变形的箱梁挠度简化计算方法

为进一步简化箱梁弯曲挠度计算方法,本文运用能量变分原理和铁摩辛柯梁理论推导了考虑全截面剪切变形的箱梁弯曲挠度计算公式,基于剪滞控制微分方程和现行公路桥规中翼缘有效宽度的折算办法,提出了全截面剪切变形的箱梁挠度简化计算方法。简支和连续箱梁算例分析表明：考虑全截面剪切影响的箱梁理论挠度、简化方法结果与ANSYS数值解吻合良好,且最大差值比基本在5%以内,验证了所提简化计算方法的正确性和适用性。

     

Axisymmetric static and dynamics snap-through phenomena in a thermally postbuckled temperature-dependent FGM circular plate

Thermal postbuckling analysis and the axisymmetric static and dynamic snap-through phenomena due to static/sudden uniform lateral pressure in a thermally postbuckled functionally graded material circular plate are performed in this research. Plate is formulated using the first order shear deformation plate theory. Thermo-mechanical properties of the plate are assumed to be temperature dependent where dependency is described according to the higher order Touloukian representation. Two types of temperature loading are considered. Uniform temperature rise and heat conduction across the thickness direction. The one dimensional heat conduction equation in the thickness direction is obtained and discreted via the central finite difference method. The obtained system of equations is nonlinear since the thermal conductivity itself is a function of the unknown nodal temperatures. Using the von-Kármán assumptions, the governing equations of the plate are obtained in a matrix representation with the aid of the conventional Ritz method whose shape functions are developed using the Gram-Schmidt process. At first thermal postbuckling analysis is performed which is a nonlinear problem with respect to both temperature and displacements. Afterwards, response of the bulged thermally postbuckled plate is obtained under the static and dynamic uniform pressure. Snap-through phenomenon may be observed in both static and dynamic loading cases, due to the immovability of the edge of the plate and the initial deflection caused by postbuckling deflection. To capture the snapping phenomenon and trace the path beyond the limit loads, cylindrical arch-length technique is used. In dynamic snap-through analysis, the effect of structural damping is also included. Numerical results of this study reveal that the structure is sensitive to the initial deflection caused by thermal postbuckling load. Increasing the temperature prior to mechanical loads enhances the snap-through intensity and also increases both the upper and lower limit loads. As shown, dynamic snap-through loads are lower than the static ones, however dynamic snap-through intensity is more than the static snap-though intensity. Furthermore, structural damping enhances the dynamic buckling loads of the plate and decreases the dynamic postbuckling deflection of the plate.     

用能量法研究双模量大挠度圆板的轴对称弯曲

双模量圆板在外载荷作用下发生轴对称弯曲变形时,会形成各向同性的拉伸区和压缩区.此种情况下,可把双模量圆板看成两种各向同性材料组成的层合板,采用弹性理论建立了双模量圆板在外载荷作用下的静力平衡方程,利用静力平衡方程确定了双模量圆板的中性面位置.在此基础上,采用能量法研究了双模量大挠度圆板轴对称弯曲变形问题,将该方法计算结...     

剪力滞效应对箱形梁挠度影响的研究

从剪力滞翘曲应力的轴向平衡条件出发,选取双室箱梁的合理翘曲位移函数,引入相应于剪力滞翘曲变形的惯性矩和惯性积等几何特性,用能量变分法建立薄壁箱梁剪力滞效应分析的控制微分方程。通过求解控制微分方程,导出集中荷载和均布荷载作用下简支箱梁和悬臂箱梁的挠度公式及有限梁段单元刚度矩阵,模型试验和ANSYS壳单元计算结果证实了其正确性。结合简支、悬臂和连续箱梁数值算例,具体分析剪力滞效应对箱梁挠度的提高程度。结果表明,无论在集中荷载还是均布荷载作用下,剪力滞效应对简支箱梁的挠度均有显著提高。在集中荷载作用下,剪力滞效应对连续箱梁挠度的提高可达14%;对于跨宽比约为4.0～6.0的简支箱梁,可将按初等梁计算的跨中挠度乘以提高系数1.05～1.11;计算悬臂箱梁的挠度时,一般可以忽略剪力滞效应的影响。