A Gaussian-2 ab initio study of [C2H5S] ions: III. H2 and CH4 eliminations from CH3CHSH and CH3SCH2

Gaussian-2 ab initio calculations were performed to examine the six modes of unimolecular dissociation of cis-CH₃CHSH⁺ (1⁺), trans-CH₃CHSH⁺ (2⁺), and CH₃SCH₂⁺ (3⁺): 1⁺→CH₃⁺+trans-HCSH (1); 1⁺→CH₃+trans-HCSH⁺ (2); 1⁺→CH₄+HCS⁺ (3); 1⁺→H₂+c-CH₂CHS⁺ (4); 2⁺→H₂+CH₃CS⁺ (5); and 3⁺→H₂+c-CH₂CHS⁺ (6). Reactions (1) and (2) have endothermicities of 584 and 496 kJ mol⁻¹, respectively. Loss of CH₄ from 1⁺ (reaction (3)) proceeds through proton transfer from the S atom to the methyl group, followed by cleavage of the C–C bond. The reaction pathway has an energy barrier of 292 kJ mol⁻¹ and a transition state with a wide spectrum of nonclassical structures. Reaction (4) has a critical energy of 296 kJ mol⁻¹ and it also proceeds through the same proton transfer step as reaction (3), followed by elimination of H_2. Formation of CH₃CS⁺ from 2⁺ (reaction (5)) by loss of H₂ proceeds through protonation of the methine (CH) group, followed by dissociation of the H₂ moiety. Its energy barrier is 276 kJ mol⁻¹. On both the MP2/6-31G* and QCISD/6-31G* potential-energy surfaces, the H₂ 1,1-elimination from 3⁺ (reaction (6)) proceeds via a nonclassical intermediate resembling c-CH₃SCH₂⁺ and has a critical energy of 269 kJ mol⁻¹.     

On the conformational stability and dimerization of phosphotransferase enzyme I from Escherichia coli

The activity of enzyme I (EI), the first protein in the bacterial PEP:sugar phosphotransferase system, is regulated by a monomer–dimer equilibrium where a Mg²⁺-dependent autophosphorylation by PEP requires the homodimer. Using inactive EI(H189A), in which alanine is substituted for the active-site His189, substrate binding effects can be separated from those of phosphorylation. Whereas 1 mM PEP (with 2 mM Mg²⁺) strongly promotes dimerization of EI(H189A) at pH 7.5 and 20 °C, 5 mM pyruvate (with 2 mM Mg²⁺) has the opposite effect. A correlation between the coupling of N- and C-terminal domain unfolding, measured by differential scanning calorimetry, and the dimerization constant for EI, determined by sedimentation equilibrium, is observed. That is, when the coupling between N- and C-terminal domain unfolding produced by 0.2 or 1.0 mM PEP and 2 mM Mg²⁺ is inhibited by 5 mM pyruvate, the dimerization constant for EI(H189A) decreases from >10⁸ to <5 × 10⁵ or 3 × 10⁷ M⁻¹, respectively. With 2 mM Mg²⁺ at 15–25 °C and pH 7.5, PEP has been found to bind to one site/monomer of EI(H189A) with K_A′10⁶ M⁻¹ (ΔG′=−33.7±0.2 kJ mol⁻¹ and ΔH=+16.3 kJ mol⁻¹ at 20 °C with ΔC_p=−1.4 kJ K⁻¹ mol⁻¹). The binding of PEP to EI(H189A) is synergistic with that of Mg²⁺. Thus, physiological concentrations of PEP and Mg²⁺ increase, whereas pyruvate and Mg²⁺ decrease the amount of dimeric, active, dephospho-enzyme I.     

Ammonia sorption by Dawson acid studied by IR spectroscopy and microbalance

Using in-situ microbalance and infrared spectroscopy techniques the double ammonia proton complexation was traced. The results confirm the formation of N₂H₇⁺ dimer in solid Dawson acid H₆P₂W₁₈O₆₂, previously reported only for N₂H₇I and for (N₂H₇)₄SiW₁₂O₄₀. The formation of such dimers was evidenced by the microbalance results, the molar ratio of ammonia to proton was measured as 2:1 at 10.7 kPa and 298 K. The formation of NH₄⁺ monomer (band at 1410 cm⁻¹) and N₂H₇⁺ dimer (1460 cm⁻¹) was revealed by IR spectroscopy. Enthalpy of ammonia sorption on Dawson structure was calculated to be −127.9 kJ mol⁻¹, indicating the lower acid strength of Dawson-type compared to that of the Keggin-type heteropolyacids, like H₄SiW₁₂O₄₀.     

TEMPO-initiated oxidation of 2-aminophenol to 2-aminophenoxazin-3-one

The oxidation reaction of 2-aminophenol (OAP) to 2-aminophenoxazin-3-one (APX) initiated by 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO) has been investigated in methanol at ambient temperature. The oxidation of OAP was followed by electronic spectroscopy and the rate constants were determined according to the rate law −d[OAP]/dt=k_obs[OAP][TEMPO]. The rate constant, activation enthalpy and entropy at 298 K are as follows: k_obs (dm³ mol⁻¹ s⁻¹)=(1.49±0.02)×10⁻⁴, E_a=18±5 kJ mol⁻¹, ΔH^‡=15±4 kJ mol⁻¹, ΔS^‡=−82±17 J mol⁻¹ K⁻¹. The results of oxidation of OAP show that the formation of 2-aminophenoxyl radical is the key step in the activation process of the substrate.     

Standard enthalpies of formation of Sr2CuO3 and Ca2CuO3

The enthalpies of reactions between alkaline-earth cuprates M₂CuO₃ (M = Ca, Sr) and hydrochloric acid were measured in a hermetic swinging calorimeter at 298.15 K. The M₂CuO₃ samples were prepared by solid-phase synthesis from calcium or strontium carbonate and copper oxide and characterized by X-ray powder diffraction, EDX and wet analysis. The standard enthalpies of formation obtained for the cuprates, −1431 ± 4 kJ mol⁻¹ for Ca₂CuO₃ and −1374 ± 3 kJ mol⁻¹ for Sr₂CuO₃, are discussed and compared with previous experimental and assessed values.     

First steps in radiation-induced hydrogel synthesis: radical formation and oligomerization in dilute aqueous N-isopropylacrylamide solutions

The reactions of hydroxyl radical, hydrogen atom and hydrated electron intermediates of water radiolysis with N-isopropylacrylamide (NIPAAm) were studied by pulse radiolysis in dilute aqueous solutions. OH, H and e_aq⁻ react with NIPAAm with rate coefficient of (6.9±1.2)×10⁹, (6.6±1)×10⁹, and (1.0±0.2)×10¹⁰ mol⁻¹ dm³ s⁻¹. In OH and H radical addition to the double bond mainly -carboxyalkyl type radicals form, (OHCH₂CH^√C(N-i-C₃H₇)O and CH₃CH^√C(N-i-C₃H₇)O). In reaction of e_aq⁻ oxygen atom centered radical anion is produced (CH₂CHC^√(N-i-C₃H₇)O⁻), the anion undergoes reversible protonation with pK_a=8.7. There is also an irreversible protonation on the β-carbon atom that produces the same radical as forms in H atom reaction (CH₃CH^√C(N-i-C₃H₇)O). The -carboxyalkyl type radicals at low NIPAAm concentration (0.1–1 mmol dm⁻³) mainly disappear in self-termination reactions, 2k_t,m=8.4×10⁸ mol⁻¹ dm³ s⁻¹. At higher concentrations the decay curves reflect the competition of the self-termination and radical addition to monomer (propagation). The termination rate coefficient of oligomer radicals containing a few monomer units is 2k_t≈2×10⁸ mol⁻¹ dm³ s¹.     

Structures and relative stabilities of [C2H6N] ions: A non-empirical and MNDO study

Non-empirical molecular orbital calculations have been performed on the seven possible [C₂H₆N]⁺ isomers at different levels of sophisitcation. The results suggest that the ions possessing a resonance contribution with a filled octet are the most stable ones. Barriers to CH₃ — and NH₃ —rotation have also been computed and are generally quite low ( 5 kJ mol⁻¹).     

The cyclohexadienylidenemethanone radical cation is a more stable distonic isomer of ionized benzaldehyde

Quantum chemical calculations (G3B3 and B3LYP/6-311++G(d,p)) and tandem mass spectrometric experiments demonstrate the higher stability of 1,3-cyclohexadienylidenemethanone radical cation compared to ionized benzaldehyde. Characterized by a heat of formation of 833 kJ mol⁻¹ (at 298 K), this ketene C₇H₆O⁺ isomer is found 43 kJ mol⁻¹ more stable. It has been generated by ion/molecule reaction between ionized benzaldehyde and neutral methanol, a new example of proton transport catalysis tautomerization. The greater stability of the ketene ion is due to the low IE of the neutral (7.49 eV).     

Highly stereoselective reduction of methyl ketone complexes of the chiral Lewis acid [(η-C5H5)Re(NO)(PPh3)] by K(s-C4H9)3BH; synthesis of optically active secondary alcohols and derivatives

Reaction of optically active ketone complexes (+)-(R)-[(η⁵-C₅H₅)Re(NO)-(PPh₃)(η¹-O=C(R)(CH₃)]⁺ BF₄⁻ (R = CH₂CH₃, CH(CH₃)₂m C(CH₃)₃, C₆H₅) with K(s-C₄H₉)₃BH gives alkoxide complexes (+)-(RS)-(η⁵-C₅H₅)Re(NO)(PPh₃)-(OCH(R)CH₃) (73–90%) in 80–98% de. The alkoxide ligand is then converted to Mosher esters (93–99%) of 79–98% de.     

Thermochemistry of organosilicon compounds VII. Permethylcyclosilazanes and 1,1,3,3-tetramethyldisilazane

The enthalpy of formation (ΔH_f⁰), enthalpy of evaporation (ΔH_v⁰) and enthalpy of atomization (ΔH_a) of permethylcyclosilazanes (Me₂SiNH)_n (n = 3, 4) and 1,1,3,3-tetramethyldisilazane (Me₂SiH)₂NH have been determined. The enthalpies of formation of these compounds were compared with those calculated by the Benson-Buss-Franklin and Tatevskii additive schemes. In higher permethylcyclosilazanes the energy of the endocyclic Si---N bond is 306 ± 2 kJ mol⁻¹ (73 kcal mol⁻¹), that is 12 ± 2 kJ mol⁻¹ (3 kcal mol⁻¹) lower than the energy of the acyclic Si---N bond. The strain energy of the cyclotrisilazane ring is estimated to be 10.5 kJ mol⁻¹ (2.5 kcal mol⁻¹), whereas the energy of the ring Si---N bond is 295 kJ mol⁻¹ (70.5 kcal mol⁻¹).

The thermochemical data for permethylcyclosilazanes were compared with the corresponding values for permethylcyclosiloxanes calculated from the results of previously reported studies.     

Self-termination rate of para-substituted benzyl radicals in aqueous solutions: a time-resolved study

The self-termination rates of the benzyl radical (C₆H₅---CH₂^√) and para-substituted benzyl radicals (X---C₆H₄---CH₂^√) were studied in aqueous solutions. The Arrhenius parameters and activation energies were determined in the temperature range 275.5–328 K. The kinetic activation energies of these radicals were close to the dynamic activation energy of the solvent, indicating that the termination rate is controlled by diffusion. The values for the rate constants (2k_t (10⁹ dm³ mol⁻¹ s⁻¹)) and the activation energies (E (kJ mol⁻¹)) were 5.94±0.52 and 14.69±0.61 for CH₃O---C₆H₄---CH₂^√, 4.52±0.2 and 17.65±1.16 for CH₃7z.sbnd;C₆H₄---CH₂^√, 3.07±0.45 and 17.58±0.97 for H---C₆H₄---CH₂^√, 4.13±0.81 and 19.10±1.20 for Cl---C₆H₄---CH₂^√ and 4.17±0.44 and 14.62±0.52 for NO₂---C₆H₄---CH₂^√.     

Persulphate quenching of the excited state of ruthenium(II) tris-bipyridyl dication: thermal reactions

The rate constant for the reaction between the sulphate radical (SO₄^√−) and the ruthenium (II) tris-bipyridyl dication (Ru(bipy)₃²⁺) is (3.3±0.2)×10⁹ mol⁻¹ dm³ s⁻¹ in 1 mol dm⁻³ H₂SO₄ and (4.9±0.5)×10⁹ mol⁻¹ dm³ s⁻¹ in 0.1 mol dm⁻³, pH 4.7 acetate buffer. The SO₄^√−radical produced by the electron transfer quenching of Ru(bipy)₃^2+* by S₂O₈²⁻ reacts rapidly with both acetate buffer and chloride ions. These side reactions result in a reduction in the overall quantum yield of Ru(bipy)₃³⁺ production and reduced reaction selectivity when Ru(bipy)₃^2+* is quenched by persulphate.     

Nido-6-metalladecaborane chemistry: Molecular structure and fluxionality of [6,6,6,6-(CO)2(PPh3)2-nido-6-WB9H13]

The molecular and crystal structure of the nido-6-tungstadecaborane [6,6,6,6-(CO)₂(PPh₃)₂-nido-6-WB₉H₁₃] (1) has been determined showing that the tungsten atom is incorporated into the 6-position of a nido 10-vertex (WB₉) cage. The tungsten atom has a seven-coordinate capped trigonal prismatic environment and is bonded to two hydrogen and three boron atoms of the {B₉H₁₃} cage, in addition to two CO groups and two PPh₃ ligands. Variable-temperature (−90°C to +50°C) ³¹P{¹H} NMR spectroscopy of 1 reveals that the exo-polyhedral ligands about the tungsten atom are fluxional with respect to PPh₃ site exchange with an activation energy (ΔG‡), at the coalescence temperature (−73°C), of <38 kJ mol⁻¹.     

Structure and conformational properties of carbonylbisimidosulfuryl fluoride, O=C(N=S(O)F2)2

The molecular structure and conformational properties of O=C(N=S(O)F₂)₂ (carbonylbisimidosulfuryl fluoride) were determined by gas electron diffraction (GED) and quantumchemical calculations (HF/3-21G* and B3LYP/6-31G*). The analysis of the GED intensities resulted in a mixture of 76(12)% syn–syn and 24(12)% syn–anti conformer (ΔH⁰=H⁰(syn–anti)−H⁰(syn–syn)=1.11(32) kcal mol⁻¹) which is in agreement with the interpretation of the IR spectra (68(5)% syn–syn and 32(5)% syn–anti, ΔH⁰=0.87(11) kcal mol⁻¹). syn and anti describe the orientation of the S=N bonds relative to the C=O bond. In both conformers the S=O bonds of the two N=S(O)F₂ groups are trans to the C–N bonds. According to the theoretical calculations, structures with cis orientation of an S=O bond with respect to a C–N bond do not correspond to minima on the energy hyperface. The HF/3-21G* approximation predicts preference of the syn–anti structure (ΔE=−0.11 kcal mol⁻¹) and the B3LYP/6-31G* method results in an energy difference (ΔE=1.85 kcal mol⁻¹) which is slightly larger than the experimental values. The following geometric parameters for the O=C(N=S)₂ skeleton were derived (r_a values with 3σ uncertainties): C=O 1.193 (9) Å, C–N 1.365 (9) Å, S=N 1.466 (5) Å, O=C–N 125.1 (6)° and C–N=S 125.3 (10)°. The geometric parameters are reproduced satisfactorily by the HF/3-21G* approximation, except for the C–N=S angle which is too large by ca. 6°. The B3LYP method predicts all bonds to be too long by 0.02–0.05 Å and the C–N=S angle to be too small by ca. 4°.     

The efficacy of nitrosonaphthol functionalized XAD-16 resin for the preconcentration/sorption of Ni(II) and Cu(II) ions

Amberlite XAD-16 resin has been functionalized using nitrosonaphthol as a ligand and characterized employing elemental, thermogravimetric analysis and FT-IR spectroscopy. The sorption of Ni(II) and Cu(II) ions onto this functionalized resin is investigated and optimized with respect to the sorptive medium (pH), shaking speed and equilibration time between liquid and solid phases. The monitoring of the influence of diverse ions on the sorption of metal ions has revealed that phosphate, bicarbonate and citrate reduce the sorption up to 10–14%. The sorption data followed Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) isotherms. The Freundlich parameters computed are 1/n = 0.56 ± 0.03 and 0.49 ± 0.05, A = 9.54 ± 1.5 and 6.0 ± 0.5 mmol g⁻¹ for Ni(II) and Cu(II) ions, respectively. D–R isotherm yields the values of X_m = 0.87 ± 0.07 and 0.35 ± 0.05 mmol g⁻¹ and of E = 9.5 ± 0.23 and 12.3 ± 0.6 kJ mol⁻¹ for Ni(II) and Cu(II) ions, respectively. Langmuir characteristic constants estimated are Q = 0.082 ± 0.005 and 0.063 ± 0.003 mmol g⁻¹, b = (4.7 ± 0.2) × 10⁴ and (7.31 ± 0.11) × 10⁴ l mol⁻¹ for Ni(II) and Cu(II) ions, respectively. The variation of sorption with temperature gives thermodynamic quantities of ΔH = −58.9 ± 0.12 and −40.38 ± 0.11 kJ mol⁻¹, ΔS = −183 ± 10 and −130 ± 8 J mol⁻¹ K⁻¹ and ΔG = −4.4 ± 0.09 and −2.06 ± 0.08 kJ mol⁻¹ at 298 K for Ni(II) and Cu(II) ions, respectively. Using kinetic equations, values of intraparticle transport and of first order rate constant have been computed for both the metal ions. The sorption procedure is utilized to preconcentrate these ions prior to their determination in tea, vegetable oil, hydrogenated oil (ghee) and palm oil by atomic absorption spectrometry using direct and standard addition methods.     

Syntheses, spectroscopic characteristics and thermolytic rearrangements of bis-[(trimethylgermyl)methyl]platinum(II) and bis-[(trimethylstannyl)methyl]platinum(II) complexes

The preparations and spectroscopic characteristics are reported of a series of (trimethylgermyl)methyl- and (trimethylstannyl)methylplatinum(II) complexes with diene and P-donor ancillary ligands, cis-Pt(CH₂GeMe₃)₂L₂ (L = PPh₃ or PPh₂Me; L₂ = dppe or cod) and cis-Pt(CH₂SnMe₃)₂L₂ (L = PPh₃; L₂ =cod). Thermolysis of toluene solutions of cis-Pt(CH₂GeMe₃)₂(PPh₃)₂ leads to cis-Pt(Me)(CH₂GeMe₂CH₂GeMe₃)(PPh₃)₂ via β-alkyl migration, after (non-rate-limiting) phosphine dissociation. Estimated activation parameters (ΔH_{298 K}^‡ = 126 ± 3 kJ mol⁻¹, ΔS^‡ = + 17 ± 7 J mol⁻¹ K⁻¹ and hence Δ_{298 K}^‡ = 121 ± 5 kJ mol⁻¹) suggest that this system is more migration labile than its silicon analogue, primarily as a result of a lower activation enthalpy. While cis-Pt(CH₂GeMe₃)₂(PPh₂Me)₂ reacts similarly but less readily, Pt(CH₂GeMe₃)₂(dppe)₂ is inert at operable temperatures. Thermolysis of Pt(CH₂GeMe₃)₂(cod) generates 1,1,3,3,-tetramethyldi-1,3-germacyclobutane as the major organogermanium product, while from cis-Pt(CH₂SnMe₃)₂(PPh₃)₂, 1,1,3,3-tetramethyldi-1,3-stannacyclobutane predominates. Mechanistic implications are discussed.     

Heat capacity and thermodynamic properties of N-(2-cyanoethyl) aniline (C9H10N2)

The low temperature heat capacities of N-(2-cyanoethyl)aniline were measured with an automated adiabatic calorimeter over the temperature range from 83 to 353 K. The temperature corresponding to the maximum value of the apparent heat capacity in the fusion interval, molar enthalpy and entropy of fusion of this compound were determined to be 323.33 ± 0.13 K, 19.4 ± 0.1 kJ mol⁻¹ and 60.1 ± 0.1 J K⁻¹ mol⁻¹, respectively. Using the fractional melting technique, the purity of the sample was determined to be 99.0 mol% and the melting temperature for the tested sample and the absolutely pure compound were determined to be 323.50 and 323.99 K, respectively. A solid-to-solid phase transition occurred at 310.63 ± 0.15 K. The molar enthalpy and molar entropy of the transition were determined to be 980 ± 5 J mol⁻¹ and 3.16 ± 0.02 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions of the compound [H_T − H_298.15] and [S_T − S_298.15] were calculated based on the heat capacity measurements in the temperature range of 83–353 K with an interval of 5 K.     

Heats of formation of isomeric [C, H4, O], [C, H3, N] and [C, H5, N] radical cations

The heats of formation of six radical cations have been calculated using ab initio MO methods at the MP4/6-31 + G(2df, p) level with MP2/6-31G(d, p)-optimized geometries. The theoretical values for ΔH⁰_f,298 (kJ/mol) of the radical ions considered are (experimental values in parentheses): methanol CH₃OH^+√: 854 (845); methyleneoxonium CH₂OH^+√₂: 815 (816); methyleneimine CH₂NH^+√: 1076 (1054); aminomethylene HCNH^+√₂: 1040 (1079); methylamine CH₃NH^+√₂: 863 (843) and methyleneammonium CH₂NH^+√₃: 855 (958). The calculated results thus confirm the discrepancy between experiment and theory on the heats of formation of nitrogen-containing radical cations. In the latter, the distonic species are calculated to be more stable than their classical isomers. The higher stability of the distonic ions has also been discussed. The recommended heat of formation of the methyleneiminium cation CH₂NH⁺₂ is 754 kJ/mol.     

Thermal stability and related thermodynamic properties of N-ethylthiourea

The enthalpy and entropy of sublimation of N-ethylthiourea were obtained from the temperature dependence of its vapour pressure measured by both the torsion–effusion and the Knudsen effusion method in the temperature range 360–380 K. The compound undergoes no solid-to-solid phase transition or decomposition below 380 K. The pressure against reciprocal temperature resulted in lg(p, kPa) = (13.40 ± 0.27) − (6067 ± 102) /T(K). The molar sublimation enthalpy and entropy at the mid interval temperature were Δ_subH_m(370 K) = (116.1 ± 2.0) kJ mol⁻¹ and Δ_subS_m(370 K) = (218.0 ± 5.2) J mol⁻¹ K⁻¹, respectively. The same quantities derived at 298.15 K were (118.8 ± 2.1) kJ mol⁻¹ and (226.1 ± 5.5) J mol⁻¹ K⁻¹, respectively.     

Reactions of Lewis bases with tetrakisdiphenylamide uranium(IV)

The coordinatively unsaturated uranium(IV) complex U[N(C₆H₅)₂]₄ has been prepared via the stoichiometric reaction of diphenylamine with [(Me₃Si)₂N]₂ H₂. U[N(C₆H₅)₂]₄ coordinates Lewis bases such as Et₂O, THF, pyridine or (EtO)₃PO, based on electronic absorption spectroscopy and ¹H NMR studies. Exchange between U[N(C₆H₅)₂]₄ and U[N(C₆H₅)₂]₄(L), where L is THF or pyridine, is rapid on the NMR time-scale between 307 and 323 K. Measurement of equilibrium constants for L = THF provides ΔH and ΔS values of −60 kJ mol⁻¹ and −1.8 × 10² J K⁻¹ mol⁻¹, respectively. U[N(C₆H₅)₂]₄ coordinates and binds (EtO)₃PO much more tightly (K_eq = & > 10⁴ M⁻¹) than THF or pyridine with the exchange rate between U[N(C₆H₅)₂]₄ and U[N(C₆H₅)₂]₄[OP(OEt)₃] being close to the NMR time-scale.