A pseudopotential study of the hydrogen bond in H2O·H2S,H2S·H2S and H2O·H2Se systems

Intermolecular potential energy curves for the hydrogen bonded systems H₂O·H₂S, H₂O·H₂Se and H₂S·H₂S were calculated with nonempirical pseudopotentials using optimized-in-molecules basis sets augmented by polarization functions. The H₂O·H₂O interaction energy curve has been also considered as a test case. The present results for H₂O·H₂S and H₂S·H₂S indicate much weaker intermolecular interactions than those found in previous ab initio calculations. The H₂O·H₂Se interaction was found to be quite similar to H₂O·H₂S.This work was partly supported by the Polish Academy of Sciences within the Project PAN-09, 7.1.1.1On leave from Quantum Chemistry Laboratory, Dept. of Chemistry, University of Warsaw, Pasteura 1, 02-093. Warsaw, Poland     

Studies on synthesis, characterization and thermochemistry of Mg2[B2O4(OH)2]·H2O

A new magnesium borate Mg₂[B₂O₄(OH)₂]·H₂O has been synthesized by the method of phase transformation of double salt at hydrothermal condition and characterized by XRD, IR, TG and DSC. The enthalpy of solution of Mg₂[B₂O₄(OH)₂]·H₂O in 0.9764 mol L^–1 HCl was determined. With the incorporation of the enthalpies of solution of H₃BO₃ in HCl (aq), of MgO in (HCl+H₃BO₃) (aq), and the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of –(3185.78±1.91) kJ mol^–1 of Mg₂[B₂O₄(OH)₂]·H₂O was obtained.This revised version was published online in November 2005 with corrections to the Cover Date.     

Viscosities and intradiffusion coefficients in the ternary system NaCl−MgCl2−H2O at 25°C

The intradiffusion coefficients of Na⁺, Cl^– ions and water and the tracerdiffusion coefficients of Ca²⁺ ion have been measured in the ternary system NaCl–MgCl₂–H₂O at 25°C. The intradiffusion coefficients of Mg²⁺ in this system have been estimated from the corresponding Ca²⁺ diffusion measurements. Viscosities were measured at the same solution concentrations as were used for the diffusion experiments. Intradiffusion and tracerdiffusion coefficients in a range of temperatures from 5 to 45°C are reported for standard sea-water which is a member of the above ternary set.     

Tracer (self)-diffusion of potassium ion in NaCl−KCl−H2O mixtures at 25°C

Tracer (self)-diffusion coefficients of K⁺ have been measured using the diaphragm cell in seven compositions of the NaCl–KCl–H₂O system. These data complete the full set of isothermal vector transport properties for five of these compositions.     

Enthalpy of solution and effect of temperature on activity coefficients in MSO4−H2SO4−H2O system

Results of calorimetric determination of integral enthalpies of solution of some hydrates (monohydrates and heptahydrates) of 3d transition metal sulphates such as FeSO₄, NiSO₄ and MnSO₄ in three-component systems at sulphuric acid concentrations up to 2M are reported. Measured values of integral enthalpies of solution are the basis for calculation of activity coefficient temperature dependences according to Pitzer's model.     

Effect of ionic interactions on the oxidation of Fe(II) with H2O2 in aqueous solutions

The oxidation of Fe(II) with H₂O₂ has been measured in NaCl and NaClO₄ solutions as a function of pH, temperature T (K) and ionic strength (M, mol-L^–1). The rate constants, k (M^–1-sec^–1), d[Fe(II)]/DT=-k[Fe(II)][₂O₂]at pH=6.5 have been fitted to equations of the formlog k = log k₀+ AI ^1/2+BI+CI ^1/2/T Where log k₀=15.53-3425/T in water; A=–2.3, –1.35; B=0.334, 0.180; and C=391, 235, respectively, for NaCl (=0.09) and NaClO₄ ( =0.08). Measurements made in NaCl solutions with added anions yield rates in the order B(OH) ₄ ^– >HCO ₃ ^– >ClO ₄ ^– >Cl^–>NO ₃ ^– >SO ₄ ^2– and are attributed to the relative strength of the interactions of Fe²⁺ or FeOH⁺ with these anions. The FeB(OH) ₄ ⁺ species is more reactive while the FeCO ₃ ⁰ , FeCl⁺, FeNO ₃ ⁺ and FeSO ₄ ⁰ species are less reactive than the FeOH⁺ ion pair. The general trend is similar to our earlier studies of the oxidation of Fe(II) with O₂ except for B(OH) ₄ ^– . The effect of pH on the logk was found to be a quadratic function of the concentration of H⁺ or OH^– from pH=4 to 8. These results have been attributed to the different rate constants for Fe²⁺ (k₀) and FeOH⁺ (k₁) which are related to the measured k by, k=k_0Fe + k_1FeOH, where _i is the molar fraction of species i. The rates increase due to the greater reactivity of FeOH⁺ compared to Fe²⁺. k₀ is independent of composition and ionic strength but k₁ is a function of ionic strength and composition due to the interactions of FeOH⁺ with various anions.     

Comparison of CO2 Reduction Performance with NH3 and H2O between Cu/TiO2 and Pd/TiO2

The aim of this study is to clarify the effect of doped metal type on CO₂ reduction characteristics of TiO₂ with NH₃ and H₂O. Cu and Pd have been selected as dopants for TiO₂. In addition, the impact of molar ratio of CO₂ to reductants NH₃ and H₂O has been investigated. A TiO₂ photocatalyst was prepared by a sol-gel and dip-coating process, and then doped with Cu or Pd fine particles by using the pulse arc plasma gun method. The prepared Cu/TiO₂ film and Pd/TiO₂ film were characterized by SEM, EPMA, TEM, STEM, EDX, EDS and EELS. This study also has investigated the performance of CO₂ reduction under the illumination condition of Xe lamp with or without ultraviolet (UV) light. As a result, it is revealed that the CO₂ reduction performance with Cu/TiO₂ under the illumination condition of Xe lamp with UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:1:1 while that without UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:0.5:0.5. It is revealed that the CO₂ reduction performance of Pd/TiO₂ is the highest for the molar ratio of CO₂/NH₃/H₂O = 1:1:1 no matter the used Xe lamp was with or without UV light. The molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp with UV light was 10.2 μmol/g, while that for Pd/TiO₂ was 5.5 μmol/g. Meanwhile, the molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp without UV light was 2.5 μmol/g, while that for Pd/TiO₂ was 3.5 μmol/g. This study has concluded that Cu/TiO₂ is superior to Pd/TiO₂ from the viewpoint of the molar quantity of CO per unit weight of photocatalyst as well as the quantum efficiency.     

次甲基硅SiH与H2X(X=O,S)反应的热力学及动力学性质研究

在量子化学对SiH与H₂O和H₂S反应计算的基础上,运用统计热力学和Wigner校正的Eyring过渡态理论,计算了上述两反应在200～2000 K温度范围内的热力学函数、平衡常数、频率因子A和速率常数随温度的变化。计算结果表明,两反应在低温下具有热力学优势,而在高温下具有动力学优势。比较两反应的计算结果发现,在相同的温度下,SiH与H₂O反应比SiH与H₂S反应放热较多,但速率常数却较小。SiH与H₂O反应和前文报道的SiH与HF反应的比较表明,SiH与H₂O反应放热较少,而且在相同温度下,速率常数也较小。     

Theoretical study on H2 elimination pathways of silylenoid H2SiLiF with CH4, NH3, H2O, HF, SiH4, PH3, H2S, and HCl

Ab initio molecular orbital calculations have been performed to explore the reaction potential energy surfaces of silylenoid H₂SiLiF with XH _n hydrides, where XH _n = CH₄, NH₃, H₂O, HF, SiH₄, PH₃, H₂S, and HCl. We have identified a previously unreported reaction pathway on each reaction surface, H₂SiLiF + H-XH _{n − 1} → H _n XSiLiF + H₂, which involves H₂ elimination following the initial formation of an association complex via a four-membered ring transition state to form the substituted three-membered ring silylenoid H _n XSiLiF and a H₂ molecule. This theoretical calculations suggest that (i) for H₂ eliminations there is a very clear trend toward lower activation barriers and more exothermic interactions on going from left to right along a given row in periodic table, and (ii) for the second-row hydrides, the H₂ elimination reactions are less exothermic than for the first-row hydrides and the reaction barriers are lower for X–S and Cl. Compared to the insertions of H₂SiLiF into XH _n , the H₂ elimination pathways should be unfavorable with higher barrier and lower exothermic.     

Tetracyanonickelate compounds as sorptive materials and the substitution of their H2O content by D2O

The compounds NiNi(CN)₄·3,5H₂O and Ni(NH₃)₂Ni(CN)₄·H₂O have been studied to examine the possibility of substituting their H₂O or NH₃ content by D₂O. Contact with D₂O was performed after heating the compounds to several temperatures. Depending on the degree of decomposition of the original compounds different ranges of substitution were possible. In such manner the compounds NiNi(CN)₄·3,5D₂O, NiNi(CN)₄·5D₂O, Ni(NH₃)₂Ni(CN)₄·D₂O, and Ni(D₂O)₂Ni(CN)₄·D₂O were prepared and thermally they were less stable than the original ones. The substitution by D₂O is in agreement with the sorptive properties of the original tetracyanonickelate against different organic compounds using GC, since these could substitute the guest component and sometimes also the ligands during their decomposition.     

A note on the electronic structure of O 2 −

Summary The electronic spectrum of O ₂ ^– is reinvestigated using CASSCF and CI methods. In particular, a previously noted curious flattening of theA ² _u curve has been studied in detail. The present analysis disagrees with the previous one where this flattening was found to be a result of an avoided curve crossing between a valence and a Rydberg state of O ₂ ^– . A simple procedure is suggested to determine whether a wavefunction is of real Rydberg character or if the bound character of the state is just an artefact of the calculation.     

Effect of ionic interactions on the rates of reduction of Cu(II) with H2O2 in aqueous solutions

The rates of reduction of Cu(II) with H₂O₂ have been measured in NaCl and NaBr solutions and mixtures with NaClO₄ as a function of pH (6 to 9), temperature (5 to 45°C) and ionic composition (0.1 to 6M). The effect of pH on the rates was found to be independent of temperature and ionic composition. The rates increased as a function of [H⁺] raised to the power of 1.3 to 1.6. Speciation calculations indicate that this pH dependence can be attributed to Cu(OH)₂ being the reactive species. The rate constants in NaCl and NaBr and mixtures with NaClO₄ were independent of ionic strength, but proportional to the halide concentration raised to the power of 2.0 (0.2 to 2.6M). These results can be attributed to Cu(OH)₂Cl ₂ ²⁻ being the reactive species to reduction with H₂O₂. The Cu(I) halide complexes formed from the reduction are not easily oxidized with O₂ or H₂O₂. The faster rates in Br⁻ solutions, which form stronger complexes with Cu⁺, support this contention. Measurements made in NaCl with added NaHCO₃, NaB(OH)₄ EDTA, NTA and glycine were also made. These measurements indicate that the CuL complexes (L=B(OH) ₄ ⁻ , CO ₃ ²⁻ , EDTA, NTA, and glycine) are not very reactive to reduction with H₂O₂. The addition of Mg²⁺ or Ca²⁺ caused the rates to increase due to the formation of MgL or CaL complexes and the resultant release of reactive Cu²⁺.     

Isotopic substitution effects on the volumetric and viscosimetric properties of water-dimethylsulfoxide mixtures at 25°C

Densities and viscosities of binary mixtures (H₂O or D₂O) (1) + (DMSO or DMSO-D6)(2) have been measured over the entire mole fraction range; and the excess volumes, excess viscosities, and excess partial molar volumes Vf of the components have been obtained. All systems show negative excess volume V^e at all compositions, values for mixtures containing D₂O being more negative than those with H₂O byca. 0.03 cm³-mol^-1 at x₁, = 0.6, where a minimum is observed. The difference between DMSO and DMSO-D6 containing mixtures is negligible. The excess viscosity η^e is always positive and shows a maximum at x₁ = 0.65; at this composition, the substitution of H₂O with D₂O causes an excess viscosity increment ofca. 0.35 mPa-s, while deuteration of DMSO brings about a smaller increase,ca. 0.1 mPa-s. The trend of V ₂ ^E with concentration shows the characteristic features of moderately hydrophobic solutes in water (negative values and a minimum in the water-rich region), features that are slightly but significantly more marked in D₂O than in H₂O. The V ₂ ^E values in the water-diluted region and at x₁, =0 are more negative for D₂O than for H₂O.     

Activity coefficient of hydrochloric acid in the system HCl−KCl−H2O at 25°C and lonic strengths from 0.1 to 3 moles-kg−1

The activity coefficient of hydrochloric acid has been determined in HCl–KCl–H₂O mixtures at 25°C and for seven values of the ionic strength between 0.1 and 3.0 mole-kg^–1, using the cellPt;H ₂(g, 1atm)\HCl(m _A ),KCl _B AgCl;Ag The results are compared with those of previous studies of the same system and are interpreted in terms of ionic interactions specific to the mixture by use of Pitzer's treatment of mixed electrolyte solutions.     

TG/DTA/MS Study of the thermal decomposition of FeSO4·6H2O

The thermal decomposition of FeSO₄·6H₂O was studied by mass spectroscopy coupled with DTA/TG thermal analysis under inert atmosphere. On the ground of TG measurements, the mechanism of decomposition of FeSO₄·6H₂O is: i) three dehydration steps FeSO₄·6H₂O FeSO₄·4H₂O+2H₂O FeSO₄·4H₂O FeSO₄·H₂O+3H₂O FeSO₄·H₂O FeSO4+H₂O ii) two decomposition steps 6FeSO₄ Fe₂(SO₄)₃+2Fe₂O₃+2SO₂ Fe₂(SO₄)3 Fe₂O₃+3SO₂+3/2O₂ The intermediate compound was identified as Fe₂(SO₄)₃ and the final product as the hematite Fe₂O₃.     

Influence of ion-background changes on the aquation rate of [CrCl3(H2O)3)]

The influence of change in ion background on the aquation rate constants of [CrCl₃(H₂O)₃)] was studied spectrophotometrically at 25°C over a broad range of ionic strengths (up to several moles/liter). The electrolytes KBr, KCl, NaClO₄, NaCl, NaBr, NaNO₃, HClO₄, HCl, LiClO₄, CaCl₂, LaCl₃, and ethanol were used. It is shown that the rate constant decreases with increasing electrolyte concentration in the electrolytic media (to 0.3 log unit in some of them), while increasing in ethanol media with increasing content of the alcohol.Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, 630090 Novosibirsk. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2695–2699, December, 1992.     

DSC study of the phase transitions in [Ni(D2O)6](ClO4)2 and [Ni(H2O)6](ClO4)2

DSC measurements were carried out for [Ni(H₂O)₆](ClO₄)₂ (sampleH) and [Ni(D₂O)₆](ClO₄)₂ (sampleD) in the temperature range 300–380 K. For both compounds two anomalies on the DSC curves were detected. The results for sampleH are compared to those previously obtained using adiabatic calorimetry method. For both compounds studied in this work the high-temperature transition appears at the same temperature while the low-temperature one is shifted towards higher temperatures in sampleD. Disorder connected with H₂O or D₂O groups is suggested in the intermediate phase between the low- and high-temperature transitions.     

A theory of molecules in molecules IV. Application to the Hydrogen Bonding Interaction in NH3 · H2O

The theory of molecules in molecules introduced in previous articles is applied to study the hydrogen bonding interaction between an ammonia molecule as proton acceptor and a water molecule as proton donor. The localized orbitals which are assumed to be least affected by the formation of the hydrogen bond are transferred unaltered from calculations on the fragments NH₃ and H₂O, the remaining orbitals are recalculated. A projection operator is used to obtain orthogonality to the transferred orbitals. Additional approximations have been introduced in order to be able to save computational time. These approximations can be justified and are seen to lead to binding energies and bond lengths which are in satisfactory agreement with the SCF values. The point charge approximation for the calculation of the interaction energy between the two sets of transferred localized orbitals is, however, not applicable in this case. An energy analysis of the effect of the hydrogen bond on the localized orbitals of the two fragments is given.     

Thermodynamics of bolaform electrolytes. I. Heat capacities and enthalpies in H2O and D2O

The partial molal heats of solution at infinite dilution, H _s ^o , of bolaform salts [Et₃N(CH₂)_nNEt₃]Br₂ and [allyl₃N(CH₂)_nNallyl₃]Br₂, have been measured in H₂O and D₂O at 25°C using a solution calorimeter. The values of H _s ^o were endothermic for almost all of the compounds studied. Values of H _s ^o were obtained as a function of temperature for several homologs in H₂O and D₂O. Positive C _p ^o values obtained from least-squares analyses of the H _s ^o vs T data show an almost linear dependence on the number of methylene groups between the nitrogen centers. Whereas the enthalpy of transfer from H₂O to D₂O is small and endothermic, relatively large positive heat capacity of transfer data, increasing with increased hydrocarbon content of the salts, were observed. The ability of the bolaform cation to act as a model for cation-cation pairing in R₄NX systems is discussed.