纳米孔莫来石陶瓷材料的制备

以正硅酸乙酯(TEOS)提供硅源、纳米氧化铝(d90=50 nm)提供铝源,通过溶胶-凝胶法与超临界干燥技术,制备了分散纳米氧化铝的SiO2气凝胶块体,所得复合气凝胶块体经1200℃、1300℃热处理后,得到了纳米孔莫来石陶瓷材料。XRD测试表明:凝胶体在1 200℃热处理后发生了莫来石化,1300℃莫来石化基本完成。压汞仪与场发射扫描电镜结果显示:凝胶块体经1 200、1 300℃热处理后,形成了具有纳米多孔结构的莫来石陶瓷材料,其骨架结构包含有200~400 nm的大孔,以及大量位于其孔壁上的6~30 nm的介孔。由于莫来石化的进行,热处理后的陶瓷材料的纳米孔结构具有更高的热稳定性。     

SiO2阶层多孔结构搭建及块体材料制备机理

借助溶胶-凝胶结合相分离和模板法进行了阶层多孔结构的搭建及二氧化硅多孔块体材料的制备,表征了阶层多孔块体的显微结构及孔结构特性,分析了阶层多孔结构的搭建机理。研究结果表明,三嵌段共聚物聚环氧乙烷-聚环氧丙烷-聚环氧乙烷（P123）的加入不仅诱导共混体系发生相分离,调控大孔结构的形成,同时形成球形胶束并作为模板剂进入骨架,而1,3,5-三甲基苯（TMB）的加入使P123形成的胶束膨胀且更加稳定,在骨架上成功引入了球形介孔,骨架中凝胶粒子相互聚集形成微孔,从而搭建贯通大孔-球形介孔-微孔同时分布的阶层多孔结构,并获得相应的多孔块体材料;当正硅酸甲酯（TMOS）：P123：TMB摩尔比为1：0.015：0.353时,多孔块体材料的阶层多孔结构最优,大孔孔径为0.5-1.5 μm,介孔孔径为3-4 nm,显气孔率66.1%,比表面积为616 m²·g^-1。     

Phase separation in mixtures of thermotropic liquid crystals and flexible polymers

The spinodal equation and the concentration-induced anisotropic-isotropic transition equation of the mixtures of thermotropic liquid crystals and flexible polymers have been studied by using the molecular field theory The calculations of the phase diagrams of this system show that,besides the isotropic classic spinodal curve,there ex ists an anisotropic spinodal curve which has not been reported in literature.These two spinodal curves can be linked up by the concentration-induced anisotropic-isotropic transition line.In the various phase regions,demixing may take place due to different phase separation mechanisms.The phase equilibrium curve cannot always join the.spinodal curve at a critical point.These results are considered very meaningful for the understanding of the special properties of liquid crystal/polymer composites and very useful for controlling the morphology and the performance of PDLC materials     

双模板法制备介孔／大孔复合孔结构硅胶独石

采用双模板法,向正硅酸甲酯的水解体系中同时引入聚乙二醇和三嵌段共聚物,成功制备出具有双连续大孔、同时孔壁中分布着有序介孔的复合孔结构硅胶独石材料. 产物的比表面积高达880 m2/g, 大孔孔径为0.2～5 μm, 介孔高度集中地分布在 5 nm. 结合物理吸附、扫描电镜、粉末X射线衍射和透射电镜等表征手段,发现合成条件如原料组成、反应温度和pH值等对反应体系中凝胶化转变和相分离发生的相对速度有重要影响,进而影响产物复合孔结构的生成. 此外,通过对合成条件的优化,一方面增强了无机骨架的强度,另一方面降低了湿凝胶干燥过程中的毛细管压力降,有效缓和了凝胶结构在干燥过程中的开裂和变形,使复合孔结构硅胶独石在厘米尺度内具有良好的整体性能.     

Recent developments in the field of monolithic stationary phases for capillary electrochromatography

This review summarizes the contributions to the rapidly growing area of monolithic columns based on both silica and synthetic polymers for capillary electrochromatography and chip electrochromatography, with a focus on those published during the year 2004. A wide variety of both modified approaches to the "old" monoliths and new monoliths have been reported despite the very short period of time covered. This demonstrates that monolithic stationary phases have become a well-established format in the field of electrochromatography. The simplicity of their preparation as well as the good control over their porous properties and surface chemistries make the monolithic separation media an attractive alternative to capillary columns packed with particulate materials.     

Porous graphene decorated silica as a new stationary phase for separation of sulfanilamide compounds in hydrophilic interaction chromatography

Porous graphene (PG) was prepared by combustion method and then coated onto aminopropyl-silica in deep eutectic solvents (DESs). PG-modified silica was evaluated in hydrophilic interaction chromatography for the separation and determination of sulfonamides in human serum samples.     

New ceramic-carbon composites for electrodes for electrochemical capacitors

A new class of composite materials is introduced. Fine powders of silica, titania, Y-modified zirconia, and three types of alumina were pressed and sintered to form porous monoliths with relatively uniform pore structure. Carbon was then deposited in the pores of such monoliths by thermal decomposition of dichloromethane, cyclohexene, and glucose. The structure of the carbon deposit was studied by low-temperature nitrogen adsorption and by thermal analysis. The composite materials were used as electrodes in electrochemical capacitors with 1-ethyl-3-methylimidazolium trifluoromethylsulfonate (a low-temperature ionic liquid) as the electrolyte. High capacitances were observed for glucose-derived materials, which had high specific surface areas.     

Atomic Force Microscopic Studies of Porous TiO2 Thin Films Prepared by the Sol-Gel Method

Porous titanium dioxide thin films were prepared from alkoxide solutions with and without polyethylene glycol (PEG) by the sol-gel method on soda-lime glass. The effects of PEG addition to the precursor solution on the microstructure and roughness of the resultant thin films were investigated by atomic force microscopy (AFM). It was found that TiO₂ films prepared from the precursor solution without PEG had granular microstructure and flat texture, and was composed of about 100 nm spherical particles. With an increase in the times of coating cycles, the roughness of films decreased and the size of TiO₂ particles increased. On the other hand, the larger the amount and molecular weight of the added PEG in precursor solutions, the larger the diameter and the depth of pores in the resultant films on the decomposition of PEG during heat-treatment. The surface of the films was also rougher, and fewer pores were produced during heat-treatment. The mechanism of porous structure formation in the TiO₂ films was explained using the principle of spinodal phase separation.     

纳米材料掺杂聚合物整体柱的构筑及在前处理领域的应用

聚合物整体柱是由单体、交联剂、引发剂和致孔剂在模具中通过原位聚合而成的棒状整体.与传统的填充式固相萃取柱相比,聚合物整体柱吸附剂凭借制备简单、柱压低、传质快及pH使用范围宽泛等优点已广泛应用于食品分析、生物医药和环境卫生等领域的前处理中.然而,通常由于聚合方式难以控制,聚合物整体柱在制备过程中容易产生颗粒堆积、孔道不均...     

Recent strategies to enhance the performance of polymer monoliths for analytical separations

This review summarizes recent developments made in the incorporation of functional materials into organic polymer monoliths, together with new monolithic forms and formats, which enhance their application as supports and stationary phase materials for sample preparation and chromatographic separations. While polymer monoliths are well‐known supports for the separation of large molecules, recent developments have been made to improve their features for the separation of small molecules. The selectivity and performance of organic polymer monoliths has been improved by the incorporation of different materials, such as metal‐organic frameworks, covalent organic frameworks, or other types of nanostructured materials (carbon nanohorns, nanodiamonds, polyoxometalates, layered double hydroxides, or attapulgite). The surface area of polymer monoliths has been significantly increased by polymer hypercrosslinking, resulting in increased efficiency when applied to the separation of small molecules. In addition, recent exploration of less conventional supports for casting polymer monoliths, including photonic fibres and 3D printed materials, has opened new avenues for the applications of polymer monoliths in the field of separation science. Recent developments made in these topics are covered, focusing on the strategies followed by the authors to prepare the polymer monoliths and the effect of these modifications on the developed analytical applications.     

Comparison of monolithic approaches for enantioselective capillary electrochromatography involving cyclodextrins

The access to CD-modified monoliths for enantiomeric separation by CEC can be divided into two main approaches. (i) Silica-based monoliths, prepared by either a sol-gel process or by sintering of silica particles, are modified after fabrication by coating with a CD selector. Alternatively the fusion of CD functionalized silica particle via gluing is feasible. (ii) Rigid or homogeneous organic polymer-based monoliths, prepared by polymerization of organic monomers in the presence of a porogen, are modified with the CD selector either by copolymerization or by physical incorporation into the continuous bed.     

Cluster kinetics and dynamics during spinodal decomposition

Spinodal decomposition (barrierless phase transition) is a spontaneous phase separation caused by conditions that force the system to become thermodynamically unstable. We consider spinodal decomposition to occur under conditions of large supersaturation S and/or small ratio of interfacial to thermal energies omega, such that the computed number of monomers in a critical nucleus xi*=(omega/ln S)3 is less than unity. The small critical nucleus size is consistent with a negligible energy barrier for initiating condensation. Thus, in contrast to conventional opinion, it is suggested that the spinodal decomposition is related to the homogeneous nucleation of metastable fluids. Population balance equations show how clusters aggregate and rapidly lead to phase separation. Different mass dependences of aggregation rate coefficients are proposed to investigate the fundamental features of spinodal decomposition. When the mass dependency is an integer, the equations are solved by the moment technique to obtain analytical solutions. When the mass dependency is a noninteger, the general cases are solved numerically. All solutions predict the two time regimes observed experimentally: the average length scale of condensed-phase domains increases as a power law with an exponent of 1/3 at early times, followed by a linear increase at longer times.     

In situ sol-gel preparation of porous alumina monoliths for chromatographic separations of adenosine phosphates

A method enabling the in situ preparation of porous alumina monoliths within 100 μm i.d. fused silica capillaries has been developed. These monoliths were prepared using the sol-gel process from a mixture consisting of an inorganic aluminum salt, a porogen, an epoxide, and a solvent. We investigated the effects of varying the preparation conditions on the physical characteristics of the monoliths with respect to their potential application in chromatographic separations. The best columns were obtained from a mixture of aluminum chloride hexahydrate, N,N-dimethylformamide, water, ethanol and propylene oxide. Adenosine phosphates were then separated in the optimized column with retention increasing according to number of phosphate functionalities.     

Structure and performance of silica-based monolithic HPLC columns

Silica-based monolithic columns were prepared for HPLC with systematic variations of the tetramethoxysilane (TMOS) and polyethylene oxide (PEO) content as reactants in a sol-gel process accompanied by phase separation. The resulting monoliths showed differences in the macropore and silica skeleton diameter as well as in the corresponding domain sizes (the sum of macropore and skeleton diameter). All monoliths were synthesized with a diameter of 4.6 mm and cladded with a suitable polyaryletheretherketone (PEEK) polymer in a standardized and optimized manner for the subsequent chromatographic evaluation of the resulting monolithic HPLC columns. The columns were tested under normal phase conditions using n-heptane/dioxane (95:5 v/v) as a mobile phase and 2-nitroanisole as a test compound for the determination of separation efficiency and permeability. Two different sets of columns were prepared: the first one in which the amount of PEO was stepwise decreased to yield monoliths with identical macropore volumes and variations in the domain sizes. The second group of materials was synthesized adjusting both TMOS and PEO quantities to yield monolithic columns with identical macropore diameters of about 1.80 microm but different skeleton diameters and macropore volumes. The chromatographic results suggest that an increase in the column performance cannot be achieved by just arbitrarily decreasing the domain size of a given column. From a certain point of "downsizing" the monolithic structure a loss of structural homogeneity can be observed, which is apparently responsible for a lower chromatographic performance.     

高效液相色谱整体柱在药物分离分析中的应用进展

本文对高效液相整体柱在药物分离分析方面的应用进行了综述.主要介绍了以烷氧基硅烷为主要原料,采用溶胶-凝胶法制备的硅胶整体柱,由于其具有微米级通孔结构和大的比表面积,他们在高效、快速分离小分子物质方面得到广泛地应用.对于聚合物整体柱,主要介绍了包括分子印迹聚合物在内的有机聚合物整体柱在药物分离、生物样品的处理等方面的应用.     

Transition from transparent aerogels to hierarchically porous monoliths in polymethylsilsesquioxane sol-gel system

A transition from hierarchical pore structures (macro- and meso-pores) to uniform mesopores in monolithic polymethylsilsesquioxane (PMSQ, CH(3)SiO(1.5)) gels has been investigated using a sol-gel system containing surfactant Pluronic F127. The precursor methyltrimethoxysilane (MTMS) undergoes an acid/base two-step reaction, in which hydrolysis and polycondensation proceed in acidic and basic aqueous media, respectively, as a one-pot reaction. Porous morphology is controlled by changing the concentration of F127. Sufficient concentrations of F127 inhibit the occurrence of micrometer-scale phase separation (spinodal decomposition) of hydrophobic PMSQ condensates and lead to well-defined mesoporous transparent aerogels with high specific pore volume as a result of the colloidal network formation in a large amount of solvent. Phase separation regulates well-defined macropores in the micrometer range on decreasing concentrations of F127. In the PMSQ-rich gelling domain formed by phase separation, the PMSQ colloidal network formation forms mesopores, leading to monolithic PMSQ gels with hierarchical macro- and meso-pore structures. Mesopores in these gels do not collapse on evaporative drying owing to the flexible networks and repulsive interactions of methyl groups in PMSQ.     

Effect of non-ionic surface active agents on TEOS-derived sols,gels and materials

The sol-gel process, starting from tetraethylorthosilicate precursor, is a suitable technique for the preparation of silica thin films. The use of specific organic additives, like non ionic surface-active agents, drastically modifies the gelation process and allows the preparation of microporous materials with a high microporous volume. The effects of additives on the sol, gel and material characteristics have been investigated by several methods such as ²⁹Si NMR, QELS, SAXS (for sols and gels), and N₂ adsorption, FESEM (for fired materials). It appears that the interactions of surface active agents with TEOS derived species limit condensation reactions and particle growing. A brittle gel structure is generated which leads to highly porous microporous silica after the elimination of organic chains by thermal treatment at 450°C. The material porous texture (specific surface area, pore size distribution and porous volume) can be varied especially by varying the surface active agent chain length and quantity. This kind of sol-gel system is suitable to prepare microporous silica membranes candidate for gas separation or catalytic reactor applications.     

银纳米颗粒负载阶层多孔二氧化硅块体的制备及表征

以溶胶-凝胶伴随相分离法制备的阶层多孔二氧化硅作为载体,3-氨丙基三乙氧基硅烷(APTES)为改性剂,乙醇为还原剂,在阶层多孔二氧化硅固体骨架上进行银纳米颗粒均匀负载.利用扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、汞压、N2吸附/脱附、X射线光电子能谱(XPS)等测试技术对银纳米颗粒负载阶层多孔二氧化硅进行了表征,探讨了APTES表面改性、乙醇还原机理以及银纳米颗粒负载块体的孔结构特征变化规律.结果表明:APTES表面改性将氨基接枝于阶层骨架上,氨基与银离子形成银氨离子,银氨离子经乙醇还原后将平均粒径约16 nm的银纳米颗粒成功负载于二氧化硅的大孔及介孔内部;负载后的阶层多孔块体的大孔骨架未受到破坏,但其比表面积由418 m2·g-1下降到254m2·g-1,两次还原负载能提高银纳米颗粒的负载量.     

Well‐controlled 3D skeletal epoxy‐based monoliths obtained by polymerization induced phase separation

We recently presented a short communication on the preparation of epoxy‐based monoliths possessing highly ordered structures by polymerization induced phase separation based on the spinodal decomposition. In this article, we describe in detail on reaction mechanisms and structural properties of the epoxy‐based monoliths with well‐controlled macropores in the micrometer range. We prepared epoxy‐based monoliths based on diglycidyl ether of bisphenol A, bis(4‐aminocyclohexyl)methane, and polyethylene glycol with a bicontinuous structure by in situ step‐growth polymerization. Different morphology of epoxy‐based monoliths could be obtained by changing formulation of monomers and porogenic solvents. Characterizations of their morphologies were performed using scanning electron microscopy, mercury intrusion porosimetry, small angle X‐ray scattering, and gas adsorption measurement (BET method). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3272–3281, 2008