Study of Ground State Interactions of Enantiopure Chiral Quaternary Ammonium Salts and Amides,Nitroalkanes, Nitroalkenes,Esters, Heterocycles,Ketones and Fluoroamides

Chiral phase-transfer catalysis provides high level of enantiocontrol, however no experimental data showed the interaction of catalysts and substrates. ¹H NMR titration was carried out on Cinchona and Maruoka ammonium bromides vs. nitro, carbonyl, heterocycles, and N−F containing compounds. It was found that neutral organic species and quaternary ammonium salts interacted via an ensemble of catalyst ⁺N−C−H and (sp²)C−H, specific for each substrate studied. The correspondent BArF salts interacted with carbonyls via a diverse set of ⁺N−C−H and (sp²)C−H compared to bromides. This data suggests that BArF ammonium salts may display a different enantioselectivity profile. Although not providing quantitative data for the affinity constants, the data reported proofs that chiral ammonium salts coordinate with substrates, prior to transition state, through specific C−H positions in their structures, providing a new rational to rationalize the origin of enantioselectivity in their catalyses.     

14N Solid‐State NMR Spectroscopy of Amino Acids

¹⁴N ultra‐wideline solid‐state NMR (SSNMR) spectra were obtained for 16 naturally occurring amino acids and four related derivatives by using the WURST–CPMG (wideband, uniform rate, and smooth truncation Carr–Purcell–Meiboom–Gill) pulse sequence and frequency‐stepped techniques. The ¹⁴N quadrupolar parameters were measured for the sp³ nitrogen moieties (quadrupolar coupling constant, C_Q, values ranged from 0.8 to 1.5 MHz). With the aid of plane‐wave DFT calculations of the ¹⁴N electric‐field gradient tensor parameters and orientations, the moieties were grouped into three categories according to the values of the quadrupolar asymmetry parameter, η_Q: low (≤0.3), intermediate (0.31–0.7), and high (≥0.71). For RNH₃⁺ moieties, greater variation in N?H bond lengths was observed for systems with intermediate η_Q values than for those with low η_Q values (this variation arose from different intermolecular hydrogen‐bonding arrangements). Strategies for increasing the efficiency of ¹⁴N SSNMR spectroscopy experiments were discussed, including the use of sample deuteration, high‐power ¹H decoupling, processing strategies, high magnetic fields, and broadband cross‐polarization (BRAIN‐CP). The temperature‐dependent rotations of the NH₃ groups and their influence on ¹⁴N transverse relaxation rates were examined. Finally, ¹⁴N SSNMR spectroscopy was used to differentiate two polymorphs of l ‐histidine through their quadrupolar parameters and transverse relaxation time constants. The strategies outlined herein permitted the rapid acquisition of directly detected ¹⁴N SSNMR spectra that to date was not matched by other proposed methods.     

Multinuclear Solid‐State Magnetic Resonance as a Sensitive Probe of Structural Changes upon the Occurrence of Halogen Bonding in Co‐crystals

Although the understanding of intermolecular interactions, such as hydrogen bonding, is relatively well‐developed, many additional weak interactions work both in tandem and competitively to stabilize a given crystal structure. Due to a wide array of potential applications, a substantial effort has been invested in understanding the halogen bond. Here, we explore the utility of multinuclear (¹³C, ^14/15N, ¹⁹F, and ¹²⁷I) solid‐state magnetic resonance experiments in characterizing the electronic and structural changes which take place upon the formation of five halogen‐bonded co‐crystalline product materials. Single‐crystal X‐ray diffraction (XRD) structures of three novel co‐crystals which exhibit a 1:1 stoichiometry between decamethonium diiodide (i.e., [(CH₃)₃N⁺(CH₂)₁₀N⁺(CH₃)₃][2 I^?]) and different para‐dihalogen‐substituted benzene moieties (i.e., p‐C₆X₂Y₄, X=Br, I; Y=H, F) are presented. ¹³C and ¹⁵N NMR experiments carried out on these and related systems validate sample purity, but also serve as indirect probes of the formation of a halogen bond in the co‐crystal complexes in the solid state. Long‐range changes in the electronic environment, which manifest through changes in the electric field gradient (EFG) tensor, are quantitatively measured using ¹⁴N NMR spectroscopy, with a systematic decrease in the ¹⁴N quadrupolar coupling constant (C_Q) observed upon halogen bond formation. Attempts at ¹²⁷I solid‐state NMR spectroscopy experiments are presented and variable‐temperature ¹⁹F NMR experiments are used to distinguish between dynamic and static disorder in selected product materials, which could not be conclusively established using solely XRD. Quantum chemical calculations using the gauge‐including projector augmented‐wave (GIPAW) or relativistic zeroth‐order regular approximation (ZORA) density functional theory (DFT) approaches complement the experimental NMR measurements and provide theoretical corroboration for the changes in NMR parameters observed upon the formation of a halogen bond.     

Preparation and Structures of 2‐Substituted 5‐Benzyl‐3‐methylimidazolidin‐4‐one‐Derived Iminium Salts,Reactive Intermediates in Organocatalytic Transformations Involving α,β‐Unsaturated Aldehydes

Preparations of the title compounds, 5 – 7 (Scheme 1 and Table 1), of their ammonium salts, 9 – 11 (Scheme 2 and Table 2), and of the corresponding cinnamaldehyde‐derived iminium salts 12 – 14 (Scheme 3 and Table 3) are reported. The X‐ray crystal structures of 15 cinnamyliminium PF₆ salts have been determined (Table 4). Selected ¹H‐NMR data (Table 5) of the ammonium and iminium salts are discussed, and structures in solution are compared with those in the solid state.     

The structure and electric characters of proton‐conducting chitosan membranes with various ammonium salts as complexant

The structural and electric properties of chitosan electrolytes doped by three different ammonium salts [CH₃COONH₄, NH₄Cl, and (NH₄)₂SO₄] were discussed. The chitosan electrolytes were prepared by solution casting technique. The results show that the addition of ammonium salts leads to: The formation of complexation between ammonium salts and chitosan matrix, the destruction of crystal forms, and the enhancement of amorphous nature. With the rise of salt content, both the glass transition temperature and the activation energy show a “V”‐type trend, whereas the conductivity exhibits a reverse trend. For different ammonium salts, the electric properties of the chitosan electrolyte are different due to the Coulomb force between anion of salts and functional groups. The CH₃COONH₄ doped chitosan electrolyte exhibits the optimum electric properties, whereas those of (NH₄)₂SO₄ doped chitosan electrolyte are worst. The chitosan electrolyte doped with 40 wt % CH₃COONH₄ has the lowest glass transition temperature of 369 K, the lowest activation energy of 0.19 eV, and the highest ionic conductivity of 2.87 × 10^?4 S cm^?1 at room temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 880–885, 2010     

Proton-coupled 13C NMR and {14N}—1H-INDOR of highly-substituted 6-membered heterocycles. I—trisubstituted pyridones and isomeric aminopyrones; tetrasubstituted pyridines

The structural elucidation by NMR spectroscopy of trisubstituted α-pyridones and the isomeric 2-amino-γ-pyrones as well as their internal and external pyrylium salts is described. The most useful parameter for the differentiation between α-pyridones and isomeric γ-pyrones is the geminal coupling constant ²J(C-6, H-5) which changes from ～2.5 Hz to ～7 Hz whenever the cyclic amide group is replaced by an oxa-function; this applies to both the γ-pyrones and their pyrylium salts. The value of J(C-6, H-5) in the pyridones resembles that of the analogous coupling in N-vinylacetamide, whose sign determination by the selective population inversion (SPI) technique is reported. The ¹³C chemical shifts of seven pyridones, pyrones and pyrylium salts are reported and their structural correlations are discussed. Quick structural assignments in these classes of compounds may also be performed by evaluating the ¹⁴N chemical shifts, which often are accessible by the {¹⁴N}—¹H-INDOR technique. The proton coupled ¹³C NMR spectra of two tetrasubstituted pyridines are also reported, and empirical correlations between long range C? H coupling constants and substituent electronegativity are discussed.     

Energetic Materials Based on the 5‐Azido‐3‐nitro‐1, 2,4‐tri­azolate Anion

This study presents the preparation of 5‐azido‐3‐nitro‐1H‐1, 2,4‐triazole ( 1 ) in both good yield and high purity, starting from commercially available chemicals in a three step synthesis. Furthermore, several metal and nitrogen‐rich salts with sodium ( 3 ), potassium ( 4 ), cesium ( 5 ), silver ( 6 ), lead ( 7 ), ammonium ( 8 ), guanidinium ( 9 ), and aminoguanidinium ( 10 ) were prepared by simple acid‐base reactions. All compounds were well characterized by various means, including vibrational (IR, Raman) and multinuclear (¹H, ¹³C, ¹⁴N, ¹⁵N) NMR spectroscopy, mass spectrometry, and DSC. Additionally the structure of 7 was determined by single‐crystal X‐ray diffraction. The sensitivities towards various outer stimuli (impact, friction, electrostatic discharge) were determined according to BAM standards. The metal salts were tested as potential primary explosives utilizing various preliminary tests.     

Synthesis and application of novel carbohydrate-based ammonium and triazolium salts

The synthesis of nine new carbohydrate-based quaternary ammonium salts and two new triazolium salts starting from d-glucose has been accomplished. Our synthesis utilized the regio- and stereoselective ring opening reaction of 2,3-anhydro sugars by nucleophilic reagents to afford the key intermediates. In these new types of phase transfer catalysts, the ammonium and triazolium functions are directly attached to the carbohydrate scaffold in different positions (2-, 3-, 6-positions of the sugar). The efficiency of the altrose- and glucose-based quaternary salts were tested in the alkylation of N-(diphenyl) methylene glycine tert-butyl ester with benzyl bromide. To our knowledge this is the first example when sugar-based quaternary ammonium or triazolium salts were used successfully as phase transfer catalysts. The enantiomeric recognition ability of the synthesized salts towards racemic Mosher’s acid silver salt was also investigated by ¹⁹F NMR spectroscopy.     

Analyse isotopique de l'azote par spectrometrie optique,pour de faibles teneurs en 15n

For mixtures of ¹⁴N₂ and ¹⁴N¹⁵N low in ¹⁵N (isotopic abundances less than 2%), previous optical spectrometric methods do not produce rapid results of sufficient precision. In this paper, operating conditions are described for the determination of the isotopic content to ±3% near the natural abundance and to ±1% when the sample contains an atom ratio of ¹⁵N: ¹⁴N of 1.5:100. The time required for a determination is ca. 10 min. A spectrometer is modified by the substitution of an exit slit and a photomultiplier in place of a photographic plate. The excitation of the electrodeless discharge tube is made by a high-frequency field. The method has been applied to samples of ammonium salts, fertilisers and plant material. In all cases, the precision of the isotopic measurements was greater than that required for most agricultural studies (5–6%).     

Fluorine-containing pyrido[1,2-<Emphasis Type="Italic">a</Emphasis>]quinazolin-6-ones

Reactions of 2-aminopyridine and 2-amino-5-methylpyridine with 2,3,4,5-tetrafluorobenzoyl chloride afforded N,N’-diaroylpyridinium salts, which were converted into 6H-pyrido[1,2-a]quinazolin-6-ones by refluxing in toluene in the presence of triethylamine. The angular structure of the tricyclic derivatives obtained was confirmed by ¹⁹F and ¹³C NMR spectroscopy and 2D heteronuclear HetCOR and HMBC experiments.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2216–2220, October, 2004.     

Crystal Structure of Mixed Crystals of the Tetra(n-butyl)ammonium Salts of cis-Tetrafluorophthalocyaninato(2−)tantalate(V) and cis-Trifluorophthalocyaninato(2−)tantalate(IV)

cis-Trichlorophthalocyaninato(2?)tantalate(V) reacts with excess tetra(n-butyl)ammonium fluoride trihydrate yielding mixed crystals of the tetra(n-butyl)ammonium salts of cis-tetrafluorophthalocyaninato(2?)tantalate(V) and cis-trifluorophthalocyaninato(2?)tantalate(IV) in the ratio five to four. These crystallize in the monoclinic space group P2₁/ n with cell parameters: a = 13.368(2) Å, b = 13.787(2) Å, c = 23.069(3) Å, β = 93.35(1)°, Z = 4. Ta^v is octacoordinated with four F atoms and four N_iso atoms in an antiprismatic cis-arrangement. The Ta^v-F distance varies from 1.919(7) to 1.966(4) Å. Ta^IV is heptacoordinated with three F atoms in a cis-arrangement. The Ta^IV-F distance varies from 1.74(1) to 1.966(4) Å. The Ta atom is located out of the centre of the N₄ plane towards the F atoms by 1.234(3) Å. The Ta–N distances range from 2.261(6) to 2.310(6) Å.     

The hydrogen‐bonding patterns of 3‐phenylpropylammonium benzoate and 3‐phenylpropylammonium 3‐iodobenzoate: generation of chiral crystals from achiral molecules

The crystal structures and hydrogen‐bonding patterns of 3‐phenylpropylammonium benzoate, C₉H₁₄N⁺·C₇H₅O₂⁻, (I), and 3‐phenylpropylammonium 3‐iodobenzoate, C₉H₁₄N⁺·C₇H₄IO₂⁻, (II), are reported and compared. The addition of the I atom on the anion in (II) produces a different hydrogen‐bonding pattern to that of (I). In addition, the supramolecular heterosynthon of (II) produces a chiral crystal packing not observed in (I). Compound (I) packs in a centrosymmetric fashion and forms achiral one‐dimensional hydrogen‐bonded columns through charge‐assisted N—H...O hydrogen bonds. Compound (II) packs in a chiral space group and forms helical one‐dimensional hydrogen‐bonded columns with 2₁ symmetry, consisting of repeating R₄³(10) hydrogen‐bonded rings that are commonly observed in ammonium carboxylate salts containing chiral molecules. This hydrogen‐bond pattern, which has been observed repeatedly in ammonium carboxylate salts, thus provides a means of producing chiral crystal structures from achiral molecules.     

Polychloride Monoanions from [Cl3]− to [Cl9]−: A Raman Spectroscopic and Quantum Chemical Investigation

Polychloride monoanions stabilized by quaternary ammonium salts are investigated using Raman spectroscopy and state‐of‐the‐art quantum‐chemical calculations. A regular V‐shaped pentachloride is characterized for the [N(Me)₄][Cl₅] salt, whereas a hockey‐stick‐like structure is tentatively assigned for [N(Et)₄][Cl₂???Cl₃^?]. Increasing the size of the cation to the quaternary ammonium salts [NPr₄]⁺ and [NBu₄]⁺ leads to the formation of the [Cl₃]^? anion. The latter is found to be a pale yellow liquid at about 40 °C, whereas all the other compounds exist as powders. Further to these observations, the novel [Cl₉]^? anion is characterized by low‐temperature Raman spectroscopy in conjunction with quantum‐chemical calculations.     

Investigation of the molecular dynamics of some phenols and their acetyl isomers in solutions by NMR relaxation

The dynamics of relaxations and Fries rearrangements in phenol acetates and their acetyl isomers was studied by the NMR relaxation technique in acetone-d ₆. The results of ¹³C and ¹H spin-lattice nuclear relaxation measurements show that these experiments can be used for determining the mobility and activation energies of the molecular motions of compounds in different systems.     

Alcoxyflurophosphoranes. II—Monoalcoxyfluorophosphoranes possédant un centre d'asymétrie; diastéréotopie des fluors apicaux

Twenty-six monoalkoxyfluorophosphoranes bearing an asymmetric substituent of types R¹PF₃(OR²*)( 1 ), R¹*PF₃(OR²) ( 2 ), R¹R³PF₂(OR²* 3 ) and R₂¹PF₂(OR²*)( 4 ), have been prepared. The non-equivalence of the axial fluorine atoms is observed in the ¹⁹F NMR spectra for the compounds of types 1 δ_F′a – δ_F′a ～ 0·5 to 3·8 ppm, J(F_aF′_a) ～ 10 Hz, 2 δ_Fa – δ_F′a ～ 1·1 to 1·5 ppm, J(F_aF′_a) ～ 14 Hz and 3 δ_Fa – δ_Fa ～ 0·2 ppm, J(F_aF′_a) ～ 10 Hz but not for those of type 4 R₁²PF₂(OR²*). Its origin is assigned to the diastereotopic character of these fluorines. The possibility of a hindered rotation of the substituents as the origin of the phenomenon is excluded. The preparation of sec-BuPF₄ and EtPhPF₃ is also reported.     

13C RMN: Non-équivalences d'ammoniums quaternaires diastéréoisoméres

¹³C magnetic resonance spectra of six diastereomeric mixtures of quaternary ammonium salts were investigated. Assignment of the signals of the non-aromatic carbons and measurement of the non-equivalences allowed the determination of the ratio of isomers in the mixtures. A deshielding β effect and a shielding γ effect for the quaternisation were pointed out.     

Solvation of Na+ in N,N-dimethylformamide + methanol solutions. A nuclear magnetic relaxation study using dynamic solvent isotope effects

Inter- and intramolecular nuclear magnetic quadrupole relaxation measurements have been used to study the system methanol (CH₃OH)+ N,N-dimethylformamide (DMF)+NaI at 25°C. The dynamic behavior of the solvent molecules was investigated, throughout the composition range of the binary mixtures, by means of ¹⁴ N relaxation of DMF and ² H of methanol-d ₁ (CH ₃ OD). The intermolecular relaxation of ²³ Na⁺ in pure DMF was used to obtain information about the symmetry of the solvent electric dipole arrangement in the solvation sphere of the ion. The investigation of preferential solvation around Na⁺ in the binary mixtures was carried out by means of ²³ Na⁺ relaxation measurements using, for the first time, both the CH ₃ OH/CD ₃ OD and the DMF/DMF-d ₇ dynamic isotope effect. The results show that, throughout the composition range, there is preferential solvation by DMF. Furthermore, the use of the isotope effects of both components allowed for the first time a basic check of the reliability of the method since we obtained two independent sets of data for the composition of the Na⁺ solvation shell in the mixtures. The consistency of the two separate data sets demonstrates that the application of the dynamic isotope effect represents a powerful tool in preferential solvation studies.     

Structural Insights into the Trp‐Cage Folding Intermediate Formation

The 20 residue long Trp‐cage is the smallest protein known, and thus has been the subject of several in vitro and in silico folding studies. Here, we report the multistate folding scenario of the miniprotein in atomic detail. We detected and characterized different intermediate states by temperature dependent NMR measurements of the ¹⁵N and ¹³C/¹⁵N labeled protein, both at neutral and acidic pH values. We developed a deconvolution technique to characterize the invisible—fully folded, unfolded and intermediate—fast exchanging states. Using nonlinear fitting methods we can obtain both the thermodynamic parameters (ΔH^F–I, T_m^F–I, ΔC_p^F–I and ΔH^I–U, T_m^I–U, ΔC_p^I–U) and the NMR chemical shifts of the conformers of the multistate unfolding process. During the unfolding of Trp‐cage distinct intermediates evolve: a fast‐exchanging intermediate is present under neutral conditions, whereas a slow‐exchanging intermediate‐pair emerges at acidic pH. The fast‐exchanging intermediate has a native‐like structure with a short α‐helix in the G¹¹–G¹⁵ segment, whereas the slow‐exchanging intermediate‐pair presents elevated dynamics, with no detectable native‐like residue contacts in which the G¹¹? P¹² peptide bond has either cis or trans conformation. Heteronuclear relaxation studies combined with MD simulations revealed the source of backbone mobility and the nature of structural rearrangements during these transitions. The ability to detect structural and dynamic information about folding intermediates in vitro provides an excellent opportunity to gain new insights into the energetic aspects of the energy landscape of protein folding. Our new experimental data offer exceptional testing ground for further computational simulations.     

Darstellung und Eigenschaften von Phthalocyaninato(2–)indaten(III) mit einzähnigen Acido-Liganden; Kristallstruktur von Tetra(n-butyl)ammonium-cis-difluoro-Phthalocyaninato(2–)indat(III)-Hydrat

Preparation and Properties of Phthalocyaninato(2–)indates(III) with Monodentate Acido Ligands; Crystal Structure of Tetra(n-butyl)ammonium cis -Difluorophthalocyaninato(2–)indate(III) Hydrate Tetra(n-butyl)ammonium cis-diacidophthalocyaninato(2–)indates(III) with the monodentate acido ligands fluoride, chloride, cyanide and formiate are synthezised by the reaction of chlorophthalocyaninatoindium(III) or cis-dihydroxophthalocyaninatoindate(III) with the respective tetra(n-butyl)ammonium salt or ammonium formiate and are characterized by their UV/VIS spectra and their vibrational spectra. The difluoro-complex salt crystallizes as a hydrate ((ⁿBu₄N)^cis[In(F)₂pc^2–] · H₂O) in the monoclinic space group P2₁/n (no. 14) with cell parameters: a = 13.081(3) Å, b = 13.936(2) Å, c = 23.972(2) Å; β = 97.79(1)°, Z = 4. Hexa-coordinated indium is surrounded by four isoindole nitrogen atoms (N_iso) and two cis-positioned fluorine atoms. The average In–F and In–N_iso distance are 2.0685(4) and 2.2033(5) Å, respectively, and the F–In–F angle is 81.5(1)°. The In atom is displaced outside the centre (Ct) of the N_iso plane towards the fluoride ligands: d(In–Ct) = 0.953(1) Å. The phthalocyaninato(2–) core is nonplanar (unsymmetrical concave distortion).