Electrochemical synthesis of copper sulfide nanoparticles

Cu₂S nanoparticles were electrosynthesized by cyclic voltammetry between 0.10 and 1.50 V in the presence of polyvinylalcohol as stabilizer. The structure and nature of the resulting Cu₂S poly (vinyl alcohol) composite were characterized by transmission electron microscopy and X-ray diffraction. The results show that electrochemically synthesized Cu₂S nanoparticles are homogeneously dispersed and well separated from one another with a mean diameter of about 12 nm.     

Reversible assembly and disassembly of gold nanoparticles directed by a zwitterionic polymer

Herein, we have successfully introduced the stimuli-response concept into the controllable synthesis of gold nanoparticles (AuNPs) with designed properties. We used a pH-responsive zwitterionic polymer that acted as a template and a stabilizer. Gold colloids prepared in situ from the polymer solution have a narrow size distribution of about 5 nm. The assembly and disassembly of AuNPs can be finely tuned by modulating the net charges of the zwitterionic polymer so that they are either positive or negative as a function of the solution pH. Different aggregates and colors appear on altering the solution pH. In acidic solutions, gold colloids form large symmetrical aggregates, while the AuNPs disperse in solutions with a pH approximately 9.6. However, as the solution pH increases (>9.6), needle-like aggregates with a small interparticle distances are formed. On the basis of TEM, SEM, 1H NMR and UV/Vis measurements, we attribute pH-triggered aggregation and color changes of the gold colloids to the ionization process and conformational change of the polymer. The ionization process governs the choice of ligand anchored on the surface of AuNPs, and the conformational change of the polymer modulates the interspaces between AuNPs. The present approach, which is based on a rational design of the physicochemical properties of the template used in the synthesis process, provides a powerful means to control the properties of the nanomaterial. Furthermore, the colorimetric readout can be visualized and applied to future studies on nanoscale switches and sensors.     

Mediated electrochemical synthesis of copper nanoparticles in solution

Environmentally friendly mediated electrochemical synthesis of copper nanoparticles in the solution using a copper anode as a source of copper ions has been realized for the first time. It is shown that at the potential of the redox pair MV²⁺/MV?⁺ methylviologen MV²⁺ is able to mediate a reduction of Cu²⁺ ions in 60% aqueous DMF/0.1 M Bu₄NBF₄. Copper nanoparticles build large aggregates (200—250 nm) in the absence of a stabilizer. The use of polyvinylpyrrolidone as a stabilizer makes it possible to obtain smaller copper nanoparticles (20—50 nm) of spherical and oval shape and to characterize them by physicochemical methods.     

Formation of silica nanoparticles in microemulsions

Silica nanoparticles for controlled release applications have been produced by the reaction of tetramethylorthosilicate (TMOS) inside the water droplets of a water-in-oil microemulsion, under both acidic (pH 1.05) and basic (pH 10.85) conditions. In-situ FTIR measurements show that the addition of TMOS to the microemulsion results in the formation of silica as TMOS, preferentially located in the oil phase, diffuses into the water droplets. Once in the hydrophilic domain, hydrolysis occurs rapidly as a result of the high local concentration of water. Varying the pH of the water droplets from 1.05 to 10.85, however, considerably slows the hydrolysis reaction of TMOS. The formation of a dense silica network occurs rapidly under basic conditions, with IR indicating the slower formation of more disordered silica in acid. SAXS analysis of the evolving particles shows that approximately 11 nm spheres are formed under basic conditions; these are stabilized by a water/surfactant layer on the particle surface during formation. Under acidic conditions, highly uniform approximately 5 nm spheres are formed, which appear to be retained within the water droplets (approximately 6 nm diameter) and form an ordered micelle nanoparticle structure that exhibits sufficient longer-range order to generate a peak in the scattering at q approximately equal to 0.05 A-1. Nitrogen adsorption analysis reveals that high surface area (510 m2/g) particles with an average pore size of 1 nm are formed at pH 1.05. In contrast, base synthesis results in low surface area particles with negligible internal porosity.     

Reversible voltage-induced assembly of au nanoparticles at liquid/liquid interfaces

The voltage-induced assembly of mercaptosuccinic acid-stabilized Au nanoparticles of 1.5 +/- 0.4 nm diameter is investigated at the polarizable water/1,2-dichloroethane interface. Admittance measurements and quasi-elastic laser scattering (QELS) studies reveal that the surface concentration of the nanoparticle at the liquid/liquid boundary is reversibly controlled by the applied bias potential. The electrochemical and optical measurements provide no evidence of irreversible aggregation or deposition of the particles at the interface. Analysis of the electrocapillary curves constructed from the dependence of the frequency of the capillary waves on the applied potential and bulk particle concentration indicates that the maximum particle surface density is 3.8 x 10(13) cm(-2), which corresponds to 67% of a square closed-pack arrangement. This system provides a unique example of reversible assembly of nanostructures at interfaces, in which the density can be effectively tuned by the applied potential bias.     

Transition metal ion directed supramolecular assembly of one- and two-dimensional polyrotaxanes incorporating cucurbituril

This paper reports a synthetic strategy to construct one- and two-dimensional (1D and 2D) polyrotaxanes, in which a number of rings are threaded onto a coordination polymer, by the combination of self-assembly and coordination chemistry. Our approach to construct polyrotaxanes with high structural regularity involves threading a cucurbituril (CB) "bead" with a short "string" to form a stable pseudorotaxane, followed by linking the pseudorotaxanes with metal ions as "linkers" to organize into a 1D or 2D polyrotaxane. A 4- or 3-pyridylmethyl group is attached to each end of 1,4-diaminobutane or 1,5-diaminopentane to produce the short "strings", which then react with the cucurbituril "bead" to form stable pseudorotaxanes. The reaction of the pseudorotaxanes with various transition metal ions including CuII, CoII, NiII, AgI, and CdII produces 1D or 2D polyrotaxanes, in which many molecular "beads" are threaded onto 1D or 2D coordination polymers as confirmed by X-ray crystallography. The overall structure of a polyrotaxane is the result of interplay among various factors that include the coordination preferences of the metal ion, spatial disposition of the donor atoms with respect to the CB beads in the pseudorotaxane, and the size and coordination ability of the counteranion.     

Electrochemical properties of gold nanoparticles assembly at polarised liquid|liquid interfaces

Capacitance measurements of a polarised liquid|liquid interface show that the capacitance of the interface increases in the presence of an adsorbed monolayer of citrate-coated gold nanoparticles. This unusual observation can be explained by an increase of the interfacial charge density or by an increase of the interfacial corrugation. This study shows that capacitance measurements provide a method to monitor metallic film formation at ITIES.     

Photochemical synthesis of copper nanoparticles in aqueous polystyrene dispersions

Photochemical deposition of copper nanoparticles onto polystyrene surface under monochromatic (λ 254 nm) and unfiltered irradiation was studied. The kinetic parameters of this process depending on the concentration of copper(II) coordination compound and the size of polystyrene microspheres were determined. A procedure was tested for the preparation of monodisperse copper nanoparticles from colloidal copper chemically synthesized in ethylene glycol matrix in the presence of polystyrene with a microsphere size of 100 nm.     

介孔球状纳米羟基磷灰石的多级组装合成

利用支撑液膜控制离子在隔离的两相中流动传输, 同时添加有机小分子协同液膜界面形成模板, 诱导纳米晶体进行嵌段组合团聚成非致密型超结构, 得到一种由纳米片状亚单元卷曲后组装形成的新型介孔球状纳米羟基磷灰石材料. TEM, XRD, BET等结果表明, 产物纳米羟基磷灰石平均孔径为17.5 nm. 细胞毒性实验表明, 不同浓度的细胞存活率高于80%, 细胞毒性为1级, 可认为材料具有良好的细胞相容性. FT-IR, UV光谱结果表明产物能有效的对鬼臼毒素进行载药包裹, 平均载药量为12.9%, 包封率为65.5%. 这种新型介孔超结构HA在酶、蛋白质的固定和分离、药物转染等方面具有其潜在的应用价值.     

Sonochemical synthesis and liquid crystal assembly of PS-b-PEO-titania aggregates

A facile ultrasonication process was developed for the controlled creation of PS-b-PEO-titania hybrid micelles and vesicles, which are assembled into three-dimensional hierarchical architectures via a liquid-crystal templating route.     

One-step synthesis and stabilization of gold nanoparticles and multilayer film assembly

Au nanoparticles (NPs) were synthesized in the one-pot procedure in water at room temperature with the wheel-shaped V^V-V^IV mixed-valence tungstovanadate [P₈W₄₈O₁₈₄{V₄^VV₂^IVO₁₂(H₂O)₂}₂]³²⁻ (V12) acting as both reducing and stabilizing agents. The V12 stabilized Au NPs (Au@V12 NPs) were characterized by SEM, TEM, DLS, UV-vis spectroscopy, XPS, and XRD analyses and the negatively charged surface of the Au@V12 NPs was proved by the zeta potential analysis. Based on the layer-by-layer assembly (LbL), the Au@V12 NPs-containing multilayer films have been fabricated on ITO-coated glass slide and quartz substrates with poly(ethyleneimine) (PEI). The regular growth of the multilayer films was monitored by UV-vis spectroscopy and cyclic voltammetry, the composition was characterized by XPS. The Au@V12 NPs based composite films showed electrocatalytic activities towards the reduction of dioxygen and the oxidation of methanol. This approach is expected to open the way towards procedures aimed at the one-step fabrication of Au NPs and polyoxometalates (POMs) into the multilayer films.     

Facile synthesis of superparamagnetic magnetite nanoparticles in liquid polyols

Magnetite nanoparticles have been successfully synthesized in liquid polyols at elevated temperature. Polyol solvent plays a crucial role in determining the morphology and colloidal stability of the resulting particles. The structure and morphology of the nanoparticles were studied using XRD, TEM, SAED, TGA and FTIR. The magnetic properties of the samples were measured using physical properties measurement system (PPMS) of Quantum Design. The results show that as-prepared magnetite nanoparticles are monodisperse, highly crystalline and superparamagnetic at room temperature. The nanoparticles can be easily dispersed in aqueous media and other polar solvents due to coated by a layer of hydrophilic polyol ligands in situ. This approach provides a facile route to prepare magnetite nanoparticles.     

Generation of metal oxide nanoparticles in optimised microemulsions

The phase behavior and structure of aqueous-in-n-heptane microemulsions, stabilized by surfactant mixtures of di-n-didodecyldimethylammonium bromide, DDAB, and Brij(R)35 were studied by small angle (neutron or X-ray) scattering techniques. The aqueous nanodroplets contain either a precursor reactive salt or a precipitating agent, so that simple mixing induces nanoparticle formation. These formulated microemulsions display good phase stability against added polar additives such as monovalent, divalent, trivalent metal ions, ammonia solution, tetrabutylammonium hydroxide, and their mixtures. Nanoparticle formation was demonstrated via precipitation of metal oxides inside the water nanodroplets, affording control over the resulting particle size. Nanoparticle characteristic size (XRD- and HR-TEM derived sizes) and specific surface areas (S(BET) (m(2)g(-1))) for iron oxide and CeO(2) prepared in these mixed microemulsions, are compared with those stabilized by single surfactants DDAB and Pure AOT.     

Growth of silica nanoparticles in methylmethacrylate-based water-in-oil microemulsions

The mechanism of silica particle formation in monomer microemulsions is studied using dynamic light scattering (DLS), atomic force microscopy, small-angle X-ray scattering (SAXS), and conductivity measurements. The hydrolysis of tetraethylorthosilicate (TEOS) in methylmethacrylate (MMA) microemulsions (MMA = methylmethacrylate) is compared with the formation of SiO₂ particles in heptane microemulsions. Stable microemulsions without cosurfactant were found for MMA, the nonionic surfactant Marlophen NP10, and aqueous ammonia (0.75 wt%). In the one-phase region of the ternary phase diagram, the water/surfactant ratio (R _w) could be varied from 6 to 18. The DLS and SAXS measurements show that reverse micelles form in these water-in-oil (w/o) microemulsions. The minimum water-to-surfactant molar ratio required for micelle formation was determined. Particle formation is achieved from the base-catalyzed hydrolysis of TEOS. According to atomic force microscopy measurements of particles isolated from the emulsion, the particle size can be effectively tailored in between 20 and 60 nm by varying R _w from 2–6 in heptane w/o microemulsions. For MMA-based microemulsions, the particle diameter ranges from 25 to 50 nm, but the polydispersity is higher. Tailoring of the particle size is not achieved with R _w, but adjusting the particle growth period produces particles between 10 and 70 nm.     

Specific ion and ph effects on supramolecular assembly of mesostructured V-Mg oxides

Mesostructured V-Mg oxides were synthesized using the surfactant cetyltrimethylammonium bromide (CTAB) as template, V2O5, V(acac)3 (vanadium acetylacetonate), or NH4VO3 as vanadium source, and Mg(NO3)2, MgCl2, MgSO4, (MgCO3)4.Mg(OH)2, Mg(CH3CO2)2, or Mg(C2H5O)2 as magnesium source. The factors that influence the formation of mesostructured V-Mg oxides, such as the pH, the natures of magnesium and vanadium sources, and the ionic strength, were identified. The formation of mesophases could be related to the presence of anionic vanadium species, to the electrostatic interactions between the oppositely charged vanadates and micellar headgroups, and to the nature of the counterion of Mg2+ in the magnesium source. The main role was played by the pH and only when the pH allowed the formation of vanadates was a mesostructure generated. The counterions of Mg2+ also played a role, which could be explained via specific ion effects and the formation of complexes between them and the vanadium-containing species, which are attracted by the headgroups of the micellar templates.     

The effects of silica nanoparticles on blue-phase liquid crystals

We investigate the effects of hydrophobic silica nanoparticles (SNs) on blue-phase liquid crystals (BPLCs). The optical microscope and reflection spectra observation reveal that a tiny hydrophobic SN dopant stabilises the BPLC phase, and widens the temperature range of the BP I phase. Furthermore, the doped dilute SNs can fine-tune their positions to relax the formation stress of the BPLC lattices, and slightly increase the platelet sizes of the BPLCs. The doped SNs also decrease the driving voltage and response time of the BPLC cell, because the added SNs decrease the elastic constant of the LC host and the relaxation time constant of the BPLC mixture.     

Formation of zinc sulfide and hydroxylapatite nanoparticles in polyelectrolyte-modified microemulsions

The paper is focused on the formation of nanoparticles, i.e., zinc sulfide (ZnS) and hydroxylapatite, in a microemulsion template phase consisting of heptanol, water, and a surfactant with a sulfobetaine head group in the absence and presence of an added polyelectrolyte. In the absence of a polyelectrolyte, beside larger particles, spherical ZnS nanoparticles with a diameter below 10 nm can be redispersed after solvent evaporation. In the presence of the synthetic cationic polyelectrolyte poly(diallyldimethylammonium chloride), a reloading of the particle surface is observed, and cationic charged ZnS nanoparticles, of about 5 nm in size, can be redispersed as a main fraction. When hydroxylapatite is formed in the presence of the more stiff biopolymer chitosan hydroxylapatite, hybrid structures were formed. Transmission electron micrographs show fiber-like aggregate structures, consisting of individual small nanoparticles ordered along the polymer chain.     

Bioresponsive nanogated ensemble based on structure-switchable aptamer directed assembly and disassembly of gold nanoparticles from mesoporous silica supports

By taking advantage of recent advances in aptamer biology and nanotechnology, a general approach was developed for the design and fabrication of bioresponsive controlled delivery system. It utilized the structure-switchable aptamer directed assembly and disassembly of gold nanoparticles from mesoporous silica supports, which enables the control of cargo release from the inside of the mesoporous nanoparticles specifically in the presence of target molecule.