Photocatalytic hydrogen production over CuO-modified titania

Efficient hydrogen production and decomposition of glycerol were achieved on CuO-modified titania (CuO-TiO(2)) photocatalysts in glycerol aqueous solutions. CuO clusters were deposited on the titania surface by impregnation of Degussa P25 TiO(2) powder (P25) with copper nitrate followed by calcination. The resulting CuO-TiO(2) composite photocatalysts were characterized by X-ray diffraction (XRD), UV-visible spectrophotometry, X-ray photoelectron spectroscopy (XPS), N(2) adsorption-desorption, transmission electron microscopy (TEM) and photoluminescence (PL) spectroscopy. The low-power ultraviolet light emitting diodes (UV-LED) were used as the light source for photocatalytic H(2)-production reaction. A detailed study of CuO effect on the photocatalytic H(2)-production rates showed that CuO clusters can act as an effective co-catalyst enhancing photocatalytic activity of TiO(2). The optimal CuO content was found to be 1.3 wt.%, giving H(2)-production rate of 2061 μmolh(-1)g(-1) (corresponding to the apparent quantum efficiency (QE) of 13.4% at 365 nm), which exceeded the rate of pure TiO(2) by more than 129 times. The quantum size effect of CuO clusters is deemed to alter its energy levels of the conduction and valence band edges in the CuO-TiO(2) semiconductor systems, which favors the electron transfer and enhances the photocatalytic activity. This work shows not only the possibility of using CuO clusters as a substitute for noble metals in the photocatalytic H(2)-production but also demonstrates a new way for enhancing hydrogen production activity by quantum size effect.     

Carbonated ferric green rust as a new material for efficient phosphate removal

Novel TiO(2)/carbon nanocomposites were prepared through the pyrolysis of TiO(2)/poly(furfuryl alcohol) hybrid materials, which were obtained by the sol-gel method, starting from titanium tetraisopropoxide (TTIP) and furfuryl alcohol (FA) precursors. Six different TiO(2)/C samples were prepared based on different TiO(2) nanoparticle sizes and TiO(2)/FA ratios. All of the samples were characterized using X-ray diffraction, infrared, and Raman spectroscopy. The results indicated effective FA polymerization onto the TiO(2) (anatase) nanoparticles, polymer conversion to disordered carbon following the pyrolysis, and a simultaneous TiO(2) anatase-rutile phase transition. The resulting TiO(2)/carbon composites were used as photocatalysts in the advanced oxidative process (AOP) for the degradation of reactive organic dyes in aqueous solution. The results indicate excellent photocatalytic performance (degradation of 99% of the dye after 60 min) with several advantages over traditional TiO(2)-based photocatalysts.     

Photocatalytic activity of a hierarchically macro/mesoporous titania

Light-harvesting macroporous channels have been successfully incorporated into a mesoporous TiO(2) framework to increase its photocatalytic activity. This bimodal porous material was characterized by X-ray diffractometry in both low-angle and wide-angle ranges, N(2) adsorption-desorption analysis, scanning and transmission electron microscopy, FT-IR, and diffuse reflectance spectroscopy. Ethylene photodegradation in gas-phase medium was employed as a probe reaction to evaluate the photocatalytic reactivity of the catalysts. The results reveal that sintering temperature significantly affects the structural stability and photocatalytic activity of titania. The catalyst which calcined at 350 degrees C possessed an intact macro/mesoporous structure and showed photocatalytic reactivity about 60% higher than that of commercial P25 titania. When the sample was calcined at 500 degrees C, the macroporous structure was retained but the mesoporous structure was partly destroyed. Further heating at temperatures above 600 degrees C destroyed both macro- and mesoporous structures, accompanied by a loss in photocatalytic activity. The high photocatalytic performance of the intact macro/mesoporous TiO(2) may be explained by the existence of macrochannels that increase photoabsorption efficiency and allow efficient diffusion of gaseous molecules.     

Enhancement of the photocatalytic activity of TiO(2) by doping it with calcium ions

Titanium dioxide (TiO(2)) with an enhanced photocatalytic activity was developed by doping it with calcium ions through a sol-gel method. The developed photocatalysts were characterized by Fourier transform infrared (FTIR) spectroscopy, N(2) physisorption, X-ray photoelectron spectroscopy (XPS), and X-ray diffraction. Their surface morphologies were studied using surface scanning electron microscopy (SEM). The XPS analyses confirmed the presence of Ti, O, Ca, and C in the Ca-doped TiO(2) sample. The activities of the catalysts were evaluated by photocatalytic degradation of an azo dye, acid red 1 (AR1), using UV light irradiation. The results of the investigations revealed that the samples calcined at 300 °C for 3.6h in a cyclic (2 cycles) mode had the best performance. Lower percentage dopant, 0.3-1.0 wt.%, enhanced the photocatalytic activity of TiO(2), with the best at 0.5 wt.% Ca-TiO(2). The performance of 0.5 wt.% Ca-TiO(2) in the degradation of AR1 was far superior to that of a commercial anatase TiO(2) Sigma product CAS No. 1317-70-0. The effect of pH on the degradation of AR1 was studied, and the pH of the dye solution exerted a great influence on the degradation of the dye.     

Influence of Excitation Wavelength (UV or Visible Light) on the Photocatalytic Activity of Titania Containing Gold Nanoparticles for the Generation of Hydrogen or Oxygen from Water

Gold nanoparticles supported on P25 titania (Au/TiO(2)) exhibit photocatalytic activity for UV and visible light (532 nm laser or polychromatic light λ > 400 nm) water splitting. The efficiency and operating mechanism are different depending on whether excitation occurs on the titania semiconductor (gold acting as electron buffer and site for gas generation) or on the surface plasmon band of gold (photoinjection of electrons from gold onto the titania conduction band and less oxidizing electron hole potential of about -1.14 V). For the novel visible light photoactivity of Au/TiO(2), it has been determined that gold loading, particle size and calcination temperature play a role in the photocatalytic activity, the most active material (Φ(H2) = 7.5% and Φ(O2) = 5.0% at 560 nm) being the catalyst containing 0.2 wt % gold with 1.87 nm average particle size and calcined at 200 °C.     

Nitrogen and sulfur co-doped TiO2 nanosheets with exposed {001} facets: synthesis, characterization and visible-light photocatalytic activity

Nitrogen and sulfur co-doped TiO(2) nanosheets with exposed {001} facets (N-S-TiO(2)) were prepared by a simple mixing-calcination method using the hydrothermally prepared TiO(2) nanosheets powder as a precursor and thiourea as a dopant. The resulting samples were characterized by transmission electron microscope, X-ray diffraction, N(2) adsorption-desorption isotherms, X-ray photoelectron spectroscopy, and UV-Vis absorption spectroscopy. The electronic properties of N,S co-doped TiO(2) were studied using the first-principle density functional theory (DFT). The photocatalytic activity of N-S-TiO(2) was evaluated by degradation of 4-chlorophenol (4-CP) aqueous solution under visible light irradiation. The production of hydroxyl radicals (˙OH) on the surface of visible-light-irradiated samples was detected by photoluminescence technique using terephthalic acid as a probe molecule. The results show that nitrogen and sulfur atoms were successfully incorporated into the lattice of TiO(2), which resulted in N-S-TiO(2) samples exhibiting stronger absorption in the UV-visible range with a red shift in the band gap transition. The first-principle DFT calculations further confirm that N and S co-dopants can induce the formation of new energy levels in the band gap, which is associated with the response of N-S-TiO(2) nanosheets to visible light irradiation. Surprisingly, pure TiO(2) nanosheets show the visible-light photocatalytic activity for the degradation of 4-CP mainly due to the substrate-surface complexation of TiO(2) and 4-CP, which results in extending absorption of titania to visible light region through ligand-to-titanium charge transfer. The N-S-TiO(2) samples studied exhibited an enhanced visible-light photocatalytic activity than pure TiO(2). Especially, the doped TiO(2) sample at the nominal weight ratio of thiourea to TiO(2) powder of 2 showed the highest photocatalytic activity, which was about twice greater than that of Degussa P25. The enhanced activity of N-S-TiO(2) can be primarily attributed to the synergetic effects of two factors including the intense absorption in the visible-light region and the exposure of highly reactive {001} facets of TiO(2) nanosheets. The former is beneficial for the photogeneration of electrons and holes participating in the photocatalytic reactions, and the latter facilitates adsorption of 4-CP molecules on the surface of TiO(2) nanosheets.     

Electrospun nanofibers of TiO2/CdS heteroarchitectures with enhanced photocatalytic activity by visible light

Herein, we have demonstrated that the electrospun nanofibers of TiO(2)/CdS heteroarchitectures could be fabricated through combining electrospinning technique with hydrothermal process. The configuration, crystal structure, and element composition of the as-prepared TiO(2)/CdS heteroarchitectures were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), resonant Raman spectrometer, X-ray photoelectron spectroscopy (XPS). The results indicated that the high-density hexagonal wurtzite CdS crystalline particles of ca. 6-40 nm in diameter were uniformly and closely grown on anatase TiO(2) nanofibers. Especially, the light-absorption properties as well as photocatalytic characteristics of pure TiO(2) nanofibers and TiO(2)/CdS heteroarchitectures with different amount loading of CdS were also investigated. The absorption of TiO(2)/CdS heteroarchitectures was extended to the visible due to effective immobilization of sensitizing agent CdS on TiO(2). In contrast with the pure TiO(2) nanofibers, the TiO(2)/CdS heteroarchitectures showed excellent photocatalytic activity by using rhodamine B dye as a model organic substrate under visible-light irradiation. It was worth noting that the cooperative photocatalytic mechanism of the TiO(2)/CdS heteroarchitectures was also discussed.     

Bismuth-doped ordered mesoporous TiO2: visible-light catalyst for simultaneous degradation of phenol and chromium

A controllable and reproducible synthesis of highly ordered two-dimensional hexagonal mesoporous, crystalline bismuth-doped TiO(2) nanocomposites with variable Bi ratios is reported here. Analyses by transmission electron microscopy, X-ray diffraction, Raman, and X-ray photoelectron spectroscopy reveal that the well-ordered mesostructure is doped with Bi, which exists as Bi(3+) and Bi((3+x+)). The Bi-doped mesoporous TiO(2) (ms-TiO(2)) samples exhibit improved photocatalytic activities for simultaneous phenol oxidation and chromium reduction in aqueous suspension under visible and UV light over the pure ms-TiO(2), P-25, and conventional Bi-doped titania. The high catalytic activity is due to both the unique structural characteristics and the Bi doping. This new material extends the spectral response from UV to the visible region, and reduces electron-hole recombination, which renders the 2.0% Bi-doped ms-TiO(2) photocatalyst highly responsive to visible light.     

V2O5-TiO2催化剂光催化降解2,4-二氯苯酚：催化剂载体和表面活性剂的影响

采用固态分散法成功制备了表面活性剂修饰的不同V2O5含量的二元氧化物催化剂,运用X射线衍射、漫反射光谱、红外光谱、扫描电镜和N2吸附-脱附法对该纳米复合物进行了表征,并在紫外光照射下考察了其光催化降解2,4-二氯苯酚的性能.结果表明,50 wt%, V2O5-TiO2(记为50V2O5-TiO2)表现出比单纯V2O5, TiO2和P25更高的光催化活性, V2O5和TiO2之间的相互作用会影响二元氧化物催化剂的光催化效率. CTAB和HTAB的修饰显著增加了50V2O5-TiO2样品的催化效率,其中(50V2O5-TiO2)-CTAB催化剂在反应30 min后表现出最高的2,4-二氯苯酚降解率(100%)和反应速率(2.22 mg/(L·min)).表面活性剂的加入能修饰二元氧化物中V2O5和TiO2的光学和电子性质,从而显著提高其光催化活性.     

In3+-doped TiO2 and TiO2/In2S3 nanocomposite for photocatalytic and stoichiometric degradations

A novel In(3+)-doped TiO(2) and TiO(2)/In(2)S(3) nanocomposites for photocatalytic degradation of environmental pollutants and stoichiometric degradation of warfare agents were prepared by a homogeneous hydrolysis with urea and thioacetamide, respectively. The prepared samples series TiInTAA were annealed at 600°C. The prepared samples were characterized by X-ray powder diffraction, IR spectroscopy, Raman spectroscopy, specific surface area (BET) and porosity determination. The method of UV-Vis diffuse reflectance spectroscopy was employed to estimate band-gap energies. The photocatalytic activity (PCA) was tested by degradation of Orange dye, whereas stoichiometric activity was studied by degradation of sulfur mustard. Incorporation of In(3+) into titania lattice increases PCA of TiO(2) in the visible light and increases stoichiometric decomposition of sulfur mustard against nondoped TiO(2) as well. PCA of TiO(2)/In(2)S(3) composite depends on the optimal ratio of TiO(2):In(2)S(3) in composite, while the activity for stoichiometric decomposition of sulfur mustards depends on the content of In(2)S(3) in nanocomposite.     

(Ni-Mo)/TiO2纳米薄膜光催化降解刚果红的性能与机理

用恒电流复合电沉积方法制备(Ni-Mo)/TiO2薄膜,以扫描电子显微镜(SEM)、X射线衍射(XRD)、拉曼(Raman)光谱和紫外-可见漫反射光谱(UV-VisDRS)对薄膜的表面形貌、晶相结构和光谱特性进行了表征,以刚果红为模拟污染物对薄膜的光催化性能进行了测定,并讨论了刚果红溶液的pH值对薄膜光催化活性的影响.采用循环伏安技术和向溶液中加入活性物种捕获剂的方法对薄膜光催化降解机理进行了探索.结果表明:(Ni-Mo)/TiO2薄膜是由粒径为50-100nmTiO2纳米粒子相和纳米晶Ni-Mo固溶体相构成的复合薄膜.薄膜具有较高的光催化活性,卤钨灯照射80min后,复合薄膜光催化刚果红的降解率是多孔TiO2(DegussaP25)/ITO(氧化铟锡)纳米薄膜的2.43倍.(Ni-Mo)/TiO2薄膜光催化活性的提高主要归因于薄膜层中有效形成的(Ni-Mo)/TiO2异质结和良好的电子通道,以及Ni-Mo纳米晶合金对溶解氧和激发电子还原反应的催化作用.分别给出了在紫外和可见光下薄膜光催化降解刚果红的反应机理.     

PANI/AMTES-TiO2纳米复合材料的制备及其光催化性能

首先用偶联剂苯胺基甲基三乙氧基硅烷(AMTES)对纳米TiO2进行表面修饰(AMTES-TiO2), 然后通过苯胺单体在AMTES-TiO2表面的原位化学氧化接枝聚合, 制备了基于共价键结合的聚苯胺(PANI)/AMTES-TiO2纳米复合光催化材料. 用红外光谱(FTIR), X射线衍射(XRD), 热重分析(TGA), 紫外-可见漫反射光谱(UV-Vis-DRS)和荧光发射光谱(PL)等技术对复合材料进行了表征. 以亚甲基蓝(MB)为目标降解物, 研究了PANI/AMTES-TiO2复合材料在太阳光和紫外光下的光催化性能. 结果表明:聚苯胺敏化拓宽了TiO2的光谱响应范围, 复合材料在紫外和可见光区都有较强的吸收, 提高了光能的利用率和光生载流子的分离效率, 使复合材料表现出较高的光催化活性; 苯胺与AMTES-TiO2的质量比(w)对复合材料的光催化活性有较大影响, 当w为0.025时, 复合材料在两种光源下的催化性能均优于TiO2和AMTES-TiO2.     

Synthesis and characterization of sulfur-titanium dioxide nanocomposites for photocatalytic oxidation of cyanide using visible light irradiation

A sol-gel method was used to prepare TiO2and sulfur-TiO2(S-TiO2)nanocomposites, which were characterized by N2 adsorption-desorption, X-ray diffraction, X-ray photoelectron spectroscopy, photoluminescene, ultraviolet visible and transmission electron microscopy measurements. The photocatalytic performance of TiO2 and S-TiO2nanocomposites, with respect to the photocatalytic oxidation of cyanide under visible light irradiation, was determined. The results reveal that S is well dispersed on the surface of TiO2 nanoparticles. Additionally, the surface area of the S-TiO2nano-composites was observed to be smaller than that of the TiO2nanoparticles because of blocked pores caused by doping with S. The S-TiO2nanocomposite (0.3 wt% S) exhibited the lowest band gap and the highest photocatalytic activity in the oxidation of cyanide. The photocatalytic performance of S-TiO2(0.3 wt% S) nanocomposites was stable, even after the fifth reuse of the nanoparticles for the oxidation of cyanide.     

Fabrication of hydroxyl group modified monodispersed hybrid silica particles and the h-SiO(2)/TiO(2) core/shell microspheres as high performance photocatalyst for dye degradation

The monodisperse hybrid silica particles (h-SiO(2)) were firstly prepared by a modified sol-gel process and the surface was modified in situ with double bonds, then abundant carboxyl moieties were introduced onto the surface of the silica core via thiol-ene click reaction. Afterward, the h-SiO(2)/TiO(2) core/shell microspheres were prepared by hydrolysis of titanium tetrabutoxide (TBOT) via sol-gel process in mixed ethanol/acetonitrile solvent, in which the activity of TBOT could be easily controlled. The carboxyl groups on the surface of silica particles promote the formation of a dense and smooth titania layer under well control, and the layer thickness of titania could be tuned from 12 to 100nm. The well-defined h-SiO(2)/TiO(2) core/shell structures have been confirmed by electron microscopy and X-ray photoelectron spectroscopy studies. After calcination at 500°C for 2h, the amorphous TiO(2) layer turned into anatase titania. These anatase titania-coated silica particles showed good photocatalytic performance in degradation of methyl orange aqueous solution under UV light.     

Highly efficient visible-light-induced photocatalytic activity of nanostructured AgI/TiO2 photocatalyst

Nanostructured AgI/TiO(2) photocatalyst was synthesized by a feasible approach with AgNO(3), LiI, and Ti(OBu)(4) and characterized by X-ray diffraction, transmission electron microscopy, angle-dependent X-ray photoelectron spectroscopy, diffusive reflectance UV-vis spectroscopy, Raman spectroscopy, photoluminescence, and the Brunauer-Emmett-Teller technique. The results of characterization reveal that the nanostructured AgI/TiO(2) has a novel core/shell/shell nanostructure of AgI/Ag-I(2)/TiO(2). Compared with TiO(2) (P25) supported AgI, the formation of the nanostructure results in substantial shifting of the absorption edge of AgI to red, enhancement of the absorption intensity, and the appearance of a strong tail absorption above 490 nm, which is assigned to the absorption of I(2) and Ag. Photocatalytic tests show that the nanostructured AgI/TiO(2) photocatalyst exhibited very high visible-light-induced photocatalytic activity for the photodegradation of crystal violet and 4-chlorophenol, which is 4 and 6 times higher than that of P25 titania supported AgI, respectively. The highly efficient visible-light-induced photocatalytic activity of the nanostructured AgI/TiO(2) is attributed to its strong absorption in the visible region and low recombination rate of the electron-hole pair due to the synergetic effect among the components of AgI, Ag, I(20, and TiO(2) in the nanostructured AgI/TiO(2).     

氮和碳共掺杂TiO2纳米晶的制备及可见光催化性能

以钛酸四丁酯为钛源, 冰醋酸为抑制剂, 超细铵盐为固体载体, 采用新型溶胶-凝胶法制备了氮和碳共掺杂TiO2纳米晶(N-C-TiO2) 光催化剂. 透射电子显微镜(TEM)结果表明, N-C-TiO2样品颗粒均匀, 尺寸细小, 且分散性好; 热失重分析(TGA)、 X射线粉末衍射(XRD)和X射线光电子能谱(XPS)研究结果表明, 复合干凝胶经低温热处理, 使铵盐载体分解、 挥发去除, 样品为单一的锐钛矿相, N和C原子扩散进入晶格结点或间隙位置, 与TiO2化学键结合; 氮气等温吸附-脱附结果表明, 样品比表面积高达356 m2/g, 孔体积为0.27 mL/g. 以氙灯为可见光光源, 罗丹明B水溶液为模拟污染物, P25为参比催化剂, 在辐射强度为100 mW/cm2的可见光照射条件下, N-C-TiO2具有很高的光催化活性, 其可见光催化活性明显高于P25.     

C-N-S-TiO2光催化剂的制备、表征及其性能

以钛酸四丁酯为钛源、功能生物小分子胱氨酸为掺杂剂,采用溶胶-凝胶法同步合成了C-N-S-TiO2光催化剂,利用XRD、XPS、FT-IR和DRS等测试技术对样品的结构及物化性能进行了表征。XRD和DRS分析表明,共掺杂抑制了TiO2晶粒的生长,提高了晶相转变温度,且C-N-S-TiO2样品的吸收带边明显"红移",光吸收范围一直延长至800 nm左右。XPS分析结果显示,C-N-S-TiO2样品表面产生了杂质能级,C、S元素分别取代部分晶格Ti4+以CO23-和S6+形式存在;而N峰呈宽化状态,以O—Ti—N和Ti—O—N键存在,且样品表面羟基含量明显增加。以罗丹明B染料为模型污染物,考察了该催化剂的可见光催化活性。结果表明,与P25 TiO2比较,C-N-S-TiO2光催化剂活性得到改进,C-N-S-TiO2光催化剂在470～800 nm波长下辐射120 min后对罗丹明B的降解率可高达83%。     

TiO2晶型对Au/TiO2上光催化分解臭氧的影响

以不同晶型TiO2为载体,采用沉积-沉淀法制备了Au/TiO2光催化剂,并用紫外-可见漫反射光谱、X射线光电子能谱(XPS)和表面光电压谱(SPS)等手段进行了催化剂表征,详细考察了Ti O2晶型对Au/TiO2光催化分解臭氧活性的影响.结果表明,光催化分解臭氧的活性顺序为Au/P25>Au/Anatase>Au/Rutile,这与不同的单一Ti O2对光催化臭氧分解的活性顺序是一致的.但在TiO2上沉积金后,其对光催化臭氧的分解活性有了显著的提高.由催化剂的Au4fXPS分析发现,不同晶型Ti O2上的电荷向金簇迁移的能力有明显差异,加之载体本身对光催化臭氧分解活性不同,两者协同作用导致负载金催化剂光催化分解臭氧活性的不同.SPS信号强度与催化剂光催化活性有很好的对应关系,SPS信号越强,光生电子和空穴分离效率越高,光催化活性越好.     

Inactivation of bacterial endospores by photocatalytic nanocomposites

A novel biocidal photocatalytic nanocomposite, composed of TiO(2) and multi-walled carbon nanotubes (MWNTs), was synthesized via wet chemistry followed by a heat treatment. Uniform anatase coatings on MWNTs were successfully obtained with a thickness of a few nanometers. The nanostructure of the composite was determined by high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The needle-like shape of the nanocomposite provided more than three times higher photocatalytic specific surface area than commercial TiO(2) nanoparticles (Degussa P25) when dispersed in water. Moreover, under ultraviolet (UV) radiation the excited electrons can be trapped at the interface between the TiO(2) layer and MWNTs and they can also be scavenged through the conductive graphitic layers. Thus, an intense photochemical reaction yielding a powerful biocide can be expected. Irradiating bacterial endospores (Bacillus cereus) with solar UV lamps in presence of the novel photocatalyst successfully inactivated the spores while solar UV lamps only or solar UV Lamps with Degussa P25 showed no significant inactivating behavior. Performance of photocatalytic nanocomposites was assessed based on time to achieve 90% inactivation of spores (LD(90)) and also in terms of time required to achieve a 1.0 log(10) reduction of spores in the tail region of the inactivation curve.     

Photochemical reduction of oxygen adsorbed to nanocrystalline TiO(2) films: a transient absorption and oxygen scavenging study of different TiO(2) preparations

Transient absorption spectroscopy (TAS) has been used to study the interfacial electron-transfer reaction between photogenerated electrons in nanocrystalline titanium dioxide (TiO(2)) films and molecular oxygen. TiO(2) films from three different starting materials (TiO(2) anatase colloidal paste and commercial anatase/rutile powders Degussa TiO(2) P25 and VP TiO(2) P90) have been investigated in the presence of ethanol as a hole scavenger. Separate investigations on the photocatalytic oxygen consumption by the films have also been performed with an oxygen membrane polarographic detector. Results show that a correlation exists between the electron dynamics of oxygen consumption observed by TAS and the rate of oxygen consumption through the photocatalytic process. The highest activity and the fastest oxygen reduction dynamics were observed with films fabricated from anatase TiO(2) colloidal paste. The use of TAS as a tool for the prediction of the photocatalytic activities of the materials is discussed. TAS studies indicate that the rate of reduction of molecular oxygen is limited by interfacial electron-transfer kinetics rather than by the electron trapping/detrapping dynamics within the TiO(2) particles.