Nonsimilar Solutions for Mixed Convection in Non‐Newtonian Fluids Along a Vertical Plate in a Porous Medium

A nonsimilar boundary layer analysis is presented for the problem of mixed convection in powerlaw type nonNewtonian fluids along a vertical plate with powerlaw wall temperature distribution. The mixed convection regime is divided into two regions, namely,the forced convection dominated regime and the free convection dominated regime. The two solutions are matched. Numerical results are presented for the details of the velocity and temperature fields. A discussion is provided for the effect of viscosity index on the surface heat transfer rate.     

Stress–strain state of a composite anisotropic plate with curvilinear cracks and thin rigid inclusions

A complexpotential solution of a mixed problem of the linear theory of elasticity is given for an infinite plate composed of two anisotropic halfplanes. The plate contains cuts and thin undeformable inclusions shaped like arbitrary open smooth curves that do not intersect each other and the interface between the halfplanes.     

Exact solutions and mathematical properties of boundary‐value problems for dynamic‐diffusion boundary layers

The paper studies boundaryvalue problems for dynamicdiffusion boundary layers occurring near a vertical wall at high Schmidt numbers and for dynamic boundary layers whose inner edge is adjacent to the dynamicdiffusion layers. Exact solutions for boundary layers at small and large times are derived. The wellposedness of the boundaryvalue problem for a steady dynamicdiffusion layer is studied.     

Velocity Measurements in a One‐Dimensional Steady Flow by Methods of Emission Tomography

A new method for velocityfield measurements in a onedimensional steady flow is proposed. The method is based on principles of laserinduced fluorescence combined with emission tomography. Results of a numerical experiment are presented.     

Dynamic crack resistance of acrylic plastic

The dependence of the stressintensity factor near the tip of a growing crack in an SO120 acrylic plastic on the crackpropagation velocity K_I(:v) within the range of 10^–5 –300 m/sec is determined. Specific features of crack propagation associated with the shape of the curve K_I(v), which has discontinuities and nonuniqueness intervals, are discussed.     

Description of a Flow of a Gas‐Condensate Mixture in an Axisymmetric Capillary Tube by the Density‐Functional Method

An isothermal flow of a twophase multicomponent mixture through a smalldiameter capillary tube is examined by the densityfunctional method. For low ratios of the characteristic radius of the capillary to its length, a general form of the dominating term in the asymptotic solution is found. An improved version of the law of mixture transfer is obtained. The form of possible corrections to the Darcy law for the filtration rates of the phases is discussed.     

Analytical Modeling of Nonaqueous Phase Liquid Dissolution with Green's Functions

Equilibrium and bicontinuum nonequilibrium formulations of the advection–dispersion equation (ADE) have been widely used to describe subsurface solute transport. The Green's Function Method (GFM) is particularly attractive to solve the ADE because of its flexibility to deal with arbitrary initial and boundary conditions, and its relative simplicity to formulate solutions for multidimensional problems. The Green's functions that are presented can be used for a wide range of problems involving equilibrium and nonequilibrium transport in semiinfinite and infinite media. The GFM is applied to analytically model multidimensional transport from persistent solute sources typical of nonaqueous phase liquids (NAPLs). Specific solutions are derived for transport from a rectangular source (parallel to the flow direction) of persistent contamination using first, second, or thirdtype boundary or source input conditions. Away from the source, the first and thirdtype condition cannot be expected to represent the exact surface condition. The secondtype condition has the disadvantage that the diffusive flux from the source needs to be specified a priori. Near the source, the thirdtype condition appears most suitable to model NAPL dissolution into the medium. The solute flux from the pool, and hence the concentration in the medium, depends strongly on the mass transfer coefficient. For all conditions, the concentration profiles indicate that nonequilibrium conditions tend to reduce the maximum solute concentration and the total amount of solute that enters the porous medium from the source. On the other hand, during nonequilibrium transport the solute may spread over a larger area of the medium compared to equilibrium transport.     

Unsteady Motion of a Viscous Liquid between Rotating Parallel Walls in the Presence of a Crossflow

The paper considers the unsteady flow of a viscous incompressible fluid inside an infinitely long slot with uniform injection or suction of the fluid through the porous walls of the slot. The plates with the fluid are rotated rigidly with constant angular velocity. The unsteady flow is induced by nontorsional vibrations of the upper plate. The flowvelocity field and the tangential stress vectors exerted by the fluid on the upper and lower walls of the slot are determined. In this case, one can find an exact solution of the threedimensional nonstationary Navier–Stokes equations. No restrictions are imposed on the motion pattern of the plate.     

Hydrodynamic calculations of layered seams on the basis of modified relative permeabilities

The possibility of reducing the dimensionality of the problem of twophase filtration in layered seams by introducing modified phase permeabilities instead of initial relative permeabilities, which are coefficients of the initial system of equations within the framework of the Barkley–Leverett model, is studied. Modified permeabilities are proposed for the case where the relative permeabilities of each phase are represented by analytical dependences for individual interlayers. Onedimensional numerical calculations with these permeabilities are in good agreement with the solution of the twodimensional problem.     

Effects of magnetic field and variable viscosity on forced non‐darcy flow about a flat plate with variable wall temperature in porous media in the presence of suction and blowing

This paper presents a study of the effect of a magnetic field and variable viscosity on steady twodimensional laminar nonDarcy forced convection flow over a flat plate with variable wall temperature in a porous medium in the presence of blowing (suction). The fluid viscosity is assumed to vary as an inverse linear function of temperature. The derived fundamental equations on the assumption of small magnetic Reynolds number are solved numerically by using the finite difference method. The effects of variable viscosity, magnetic and suction (or injection) parameters on the velocity and temperature profiles as well as on the skinfriction and heattransfer coefficients were studied. It is shown that the magnetic field increases the wall skin friction while the heattransfer rate decreases.     

Generation of perturbations by a localized vibrator in the boundary layer of a nonswept wing

Origination and development of perturbations generated by a threedimensional vibrating surface in the boundary layer on an airfoil with a zero slip angle is experimentally studied. Surface vibrations were generated by a Mylar membrane. It is shown that highamplitude vibrations of a threedimensional surface lead to simultaneous formation of two types of perturbations in the boundary layer: quasistationary streamwise structures and wave packets accompanying them. The presence of regions with favorable and adverse pressure gradients does not exert a significant effect on evolution of streamwise structures but leads first to attenuation and then to amplification of wave packets.     

Approximate estimates of the high‐temperature creep of structural elements

The creep and longterm strength of structural elements under temperatures much higher than operational temperatures are studied. The actual nonuniform stress–strain state is reduced to a fictitious uniform state by averaging the specific dissipated power over the volume of the body. This allows one to estimate the intensity of creep and longterm strength of structural elements in terms of volumeaveraged energy parameters by using methods of ideal plasticity and considering statically possible stress fields and kinematically possible velocity and strain rate fields.     

Unsteady Radiative–Convective Heat Transfer in a Flow Emitting‐Absorbing and Scattering Medium around an Ablating Plate

A conjugate problem of radiative–convective heat transfer in a turbulent hightemperature gasdisperse flow around a thermally thin ablating plate is considered. The plate experiences intense radiative heating by an external source, which is a blackbody. The temperature fields and the distributions of heat fluxes along the plate under unsteady conditions are calculated. The data gained make it possible to examine the effect of the Stark number and phasetransition heat in the plate material on the time evolution of the thermal state of the boundarylayer medium and the plate itself being heated by a hightemperature radiation source.     

Adjoint problems of mechanics of continuous media in gas‐laser cutting of metals

A mathematical model of gaslaser cutting of metal plates in an inert gas is proposed. The formation and flow of the liquid metal melt film at the cutting front is considered within the framework of incompressible boundarylayer equations. Based on the resultant analytical solution, a local law of energy conservation on the cutting surface is derived, which takes into account the meltfilm thickness and the temperature dependence of thermophysical parameters of the metal. The problem of the cutting shape and depth is solved in the twodimensional formulation. A comparison with experimental data is made in terms of the cutting depth and maximum cutting velocity for carbon and alloy steel.     

Using a hot‐wire anemometer for measurement of characteristics of a random acoustic field in compressible flows

The problem of interpretation of hotwire measurements of acoustic fields in compressible flows is considered. Relations between massflow and totaltemperature fluctuations registered by a hotwire anemometer and pressure and velocity fluctuations are found. The relations obtained are applicable in the general case for measurement of resultant acoustic fluctuations at some point of the flow, which are generated by arbitrary distributed sources of sound with priorunknown properties.     

Propagation of Linear Waves in Gas‐Saturated Porous Media with Allowance for Interphase Heat Transfer

The effect of gas–skeleton heattransfer processes on propagation of fast and slow waves in a porous medium is examined. Frequency intervals are identified, in which attenuation of waves in a gassaturated porous medium is mainly controlled by the heattransfer processes.     

Numerical analysis of axisymmetric buckling of conical shells

Nonlinear boundaryvalue problems of axisymmetric buckling of conical shells under a uniformly distributed normal pressure are solved by the shooting method. The problems are formulated for a system of six firstorder ordinary differential equations with independent rotation and displacement fields. Simply supported and clamped cases are considered. Branching solutions of the boundaryvalue problems are studied for different pressures and geometrical parameters of the shells. The nonmonotonic and discontinuous curves of equilibrium states obtained show that collapse, i.e., snapthrough instability is possible. For a simply supported shell, multivalued solutions are obtained for both external and internal pressure. For a clamped thinwalled shell, theoretical results are compared with experimental data.     

Mixing Layer on the Lee Side of an Obstacle

Twolayer miscible flow above an uneven bottom is considered. A mathematical model in the shallowwater approximation is constructed for the development of a turbulent layer between homogeneous layers of different density in a twolayer channel flow over a local obstacle. The influence of the mixing process on the formation of an initial segment of the steadystate densitystratified flow on the leeward side of the obstacle is studied.     

Heat Transfer on the Surface on a Spherically Blunted Cone Exposed to a Supersonic Spatial Flow with Injection of a Coolant Gas

The heattransfer processes in a supersonic spatial flow around a spherically blunted cone with allowance for heat overflow along the longitudinal and circumferential coordinates and injection of a coolant gas are studied numerically. The prospects of using highly heatconducting materials and injection of a coolant gas for reduction of the maximum temperatures at the body surface are demonstrated. The solutions of the direct and inverse problems in one, two, and threedimensional formulations for different shell materials are compared. The error of the thinwall method in determining the heat flux on the heatloaded boundary of the body is estimated.     

Effect of Free‐Stream Turbulence on the Flow Structure near a Wedge and the Windward Side of an Airfoil

The flow structure behind wire grids is studied for flows with a low subsonic velocity, and the effect of grids on the boundarylayer flow structure is considered. It is shown that the meanvelocity inhomogeneity induced by the grid does not disappear until a distance of 925 calibers downstream of the grid is reached. Liquidcrystal thermography combined with hotwire measurements made it possible to find the source of steady largescale streamwise vortex structures in the boundary layer on a wedge and on an airfoil and to determine the parameters of these structures.