On the vanishing of the additive measures of strain and rotation for finite deformations

Explicit formulae for the finite strain and rotation measures are given, in the cases when either one of the infinitesimal tensors of strain and rotation vanishes. Conversely, when the finite strain or rotation measure vanishes, explicit formulae for the infinitesimal tensors of strain and rotation are also obtained.     

Instability of a plane axisymmetric flow with a shear discontinuity in the velocity profile

It is proposed to investigate the stability of a plane axisymmetric flow with an angular velocity profile (r) such that the angular velocity is constant when r < r_O – L and r > r_O + L but varies monotonically from ₁ to ₂ near the point r_O, the thickness of the transition zone being small L r_O, whereas the change in velocity is not small ¦₂ – ₁¦ ₂, ₁. Obviously, as L O short-wave disturbances with respect to the azimuthal coordinate (k=m/r_O 1/r_O) will be unstable with a growth rate-close to the Kelvin—Helmholtz growth rate. In the case L=O (i.e., for a profile with a shear-discontinuity) we find the instability growth rate _O and show that where the thickness of the discontinuity L is finite (but small) the growth rate does not differ from _O up to terms proportional to kL 1 and 1/m 1. Using this example it is possible to investigate the effect of rotation on the flow stability. It is important to note that stabilization (or destabilization) of the flow in question by rotation occurs only for three-dimensional or axisymmetric perturbations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 111–114, January–February, 1985.     

On the closure problem for Darcy's law

In a previous derivation of Darcy's law, the closure problem was presented in terms of an integro-differential equation for a second-order tensor. In this paper, we show that the closure problem can be transformed to a set of Stokes-like equations and we compare solutions of these equations with experimental data. The computational advantages of the transformed closure problem are considerable.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the averaging volume, m² - B second-order tensor used to respresent the velocity deviation - b vector used to represent the pressure deviation, m^–1 - C second-order tensor related to the permeability tensor, m^–2 - D second-order tensor used to represent the velocity deviation, m² - d vector used to represent the pressure deviation, m - g gravity vector, m/s² - I unit tensor - K C ^–1,–D, Darcy's law permeability tensor, m² - L characteristic length scale for volume averaged quantities, m - characteristic length scale for the-phase, m - l _i i=1, 2, 3, lattice vectors, m - n unit normal vector pointing from the-phase toward the-phase - n _e outwardly directed unit normal vector at the entrances and exits of the-phase - p pressure in the-phase, N/m ² - p intrinsic phase average pressure, N/m² - p –p , spatial deviation of the pressure in the-phase, N/m² - r position vector locating points in the-phase, m - r ₀ radius of the averaging volume, m - t time, s - v velocity vector in the-phase, m/s - v intrinsic phase average velocity in the-phase, m/s - v phase average or Darcy velocity in the \-phase, m/s - v –v , spatial deviation of the velocity in the-phase m/s - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ Greek Letters V /V volume fraction of the-phase - mass density of the-phase, kg/m³ - viscosity of the-phase, Nt/m²     

The virtual origin of riblets in an open channel flow

In this paper, a method using the mean velocity profiles for the buffer layer was developed for the estimation of the virtual origin over a riblets surface in an open channel flow. First, the standardized profiles of the mixing length were estimated from the velocity measurement in the inner layer, and the location of the edge of the viscous layer was obtained. Then, the virtual origins were estimated by the best match between the measured velocity profile and the equations of the velocity profile derived from the mixing length profiles. It was made clear that the virtual origin and the thickness of the viscous layer are the function of the roughness Reynolds number. The drag variation coincided well with other results.Nomenclature f _r skin friction coefficient - f _ro skin friction coefficient in smooth channel at the same flow quantity and the same energy slope - g gravity acceleration - H water depth from virtual origin to water surface - H ⁺ u*H/ - H false water depth from top of riblets to water surface - H ⁺ u*H/ - I _e streamwise energy slope - I _b bed slope - k riblet height - k ⁺ u*k/ - l mixing length - l _s standardized mixing length - Q flow quantity - Re Reynolds number volume flow/unit width/v - s riblet spacing - u mean velocity - u* friction velocity = - u* false friction velocity = - y distance from virtual origin - y distance from top of riblet - y ₀ distance from top of riblet to virtual origin - y _v distance from top of riblet to edge of viscous layer - y ⁺ u*y/ - y ⁺ u*y/ - y ₀ ⁺ u*y ₀/ - u ⁺ u*y/ - shifting coefficient for standardization - thickness of viscous layer=y ₀+y - ⁺ u*/ - ⁺ u*/ - eddy viscosity - ridge angle - v kinematic viscosity - density - shear stress     

Über den Einfluß von Querkrümmung und Dichte bei inhomogenen turbulenten Freistrahlen

Zusammenfassung Zur Berechnung turbulenter Strömungen wird das k--Modell im Ansatz für die turbulente Scheinzähigkeit erweitert, so daß es den Querkrümmungs- und Dichteeinfluß auf den turbulenten Transportaustausch erfaßt. Die dabei zu bestimmenden Konstanten werden derart festgelegt, daß die bestmögliche Übereinstimmung zwischen Berechnung und Messung erzielt wird. Die numerische Integration der Grenzschichtgleichungen erfolgt unter Verwendung einer Transformation mit dem Differenzenverfahren vom Hermiteschen Typ. Das erweiterte Modell wird auf rotationssymmetrische Freistrahlen veränderlicher Dichte angewendet und zeigt Übereinstimmung zwischen Rechnung und Experiment.

---

On the influence of transvers-curvature and density in inhomogeneous turbulent free jets

The prediction of turbulent flows based on the k- model is extended to include the influence of transverse-curvature and density on the turbulent transport mechanisms. The empirical constants involved are adjusted such that the best agreement between predictions and experimental results is obtained. Using a transformation the boundary layer equations are solved numerically by means of a finite difference method of Hermitian type. The extended model is applied to predict the axisymmetric jet with variable density. The results of the calculations are in agreement with measurements.

---

Bezeichnungen Wirbelabsorptionskoeffizient - c_i Massenkonzentration der Komponente i - c_D, c_L, c, c₁, c₂ Konstanten des Turbulenzmodells - d Düsendurchmesser - E bezogene Dissipationsrate - f bezogene Stromfunktion - f Korrekturfunktion für die turbulente Scheinzähigkeit - j turbulenter Diffusionsstrom - k Turbulenzenergie - k_i Schrittweite in -Richtung - K dimensionslose Turbulenzenergie - L turbulentes Längenmaß - M_i Molmasse der Komponente i - p Druck - allgemeine Gaskonstante - r Querkoordinate - r_0,5 Halbwertsbreite der Geschwindigkeit - r_0,5c Halbwertsbreite der Konzentration - T Temperatur - u Geschwindigkeitskomponente in x-Richtung - v Geschwindigkeitskomponente in r-Richtung - x Längskoordinate - y allgemeine Funktion - Y_i diskreter Wert der Funktion y - Relaxationsfaktor für Iteration - turbulente Dissipationsrate - transformierte r-Koordinate - kinematische Zähigkeit - Exponent - transformierte x-Koordinate - Dichte - _k, Konstanten des Turbulenzmodells - Schubspannung - allgemeine Variable - Stromfunktion - Turbulente Transportgröße Indizes 0 Strahlanfang - m auf der Achse - r mit Berücksichtigung der Krümmung - t turbulent - mit Berücksichtigung der Dichte - im Unendlichen - Schwankungswert oder Ableitung einer Funktion - – Mittelwert Herrn Professor Dr.-Ing. R. Günther zum 70. Geburtstag gewidmet     

Face-Centered and Volume-Centered Discrete Analogs of the Exterior Differential Equations Governing Porous Medium Flow I: Theory

This paper presents a physics-oriented approach to approximate the continuum equations governing porous media flow by discrete analogs. To that end, the continuity equation and Darcys law are reformulated using exterior differential forms. This way the derivation of a system of algebraic equations (the discrete analog) on a finite-volume mesh can be accomplished by simple and elegant translation rules. In the discrete analog the information about the conductivities of the porous medium and the metric of the mesh are represented in one matrix: the discrete dual. The discrete dual of the block-centered finite difference method is presented first. Since this method has limited applicability with respect to anisotropy and non-rectangular grid blocks, the finite element dual is introduced as an alternative. Application of a domain decomposition technique yields the face-centered finite element method. Since calculations based on pressures in volume centers are sometimes preferable, a volume-centered approximation of the face-centered approximation is presented too.     

Asymptotics of the homogenized moduli for the elastic chess-board composite

We find the asymptotic behavior of the homogenized coefficients of elasticity for the chess-board structure. In the chess board white and black cells are isotropic and have Lamé constants (, ,) and (, ) respectively. We assume that the black cells are soft, so 0. It turns out that the Poisson ratio for this composite tends to zero with .     

Mixed convection on vertical plate for fluids of any prandtl number

A mixed convection parameter=(Ra) ^1/4/(Re)^1/2, with=Pr/(1+Pr) and=Pr/(1 +Pr)^1/2, is proposed to replace the conventional Richardson number, Gr/Re², for combined forced and free convection flow on an isothermal vertical plate. This parameter can readily be reduced to the controlling parameters for the relative importance of the forced and the free convection,Ra ^1/4/(Re ^1/2 Pr ^1/3) forPr 1, and (RaPr)^1/2/(RePr ^1/2 forPr 1. Furthermore, new coordinates and dependent variables are properly defined in terms of, so that the transformed nonsimilar boundary-layer equations give numerical solutions that are uniformly valid over the entire range of mixed convection intensity from forced convection limit to free convection limit for fluids of any Prandtl number from 0.001 to 10,000. The effects of mixed convection intensity and the Prandtl number on the velocity profiles, the temperature profiles, the wall friction, and the heat transfer rate are illustrated for both cases of buoyancy assisting and opposing flow conditions.

---

Mischkonvektion an einer vertikalen Platte für Fluide beliebiger Prandtl-Zahl

Zusammenfassung Für die kombinierte Zwangs- und freie Konvektion an einer isothermen senkrechten Platte wird ein Mischkonvektions-Parameter=( Ra) ^1/4 (Re)^1/2, mit=Pr/(1 +Pr) und=Pr/(1 +Pr)^1/2 vorgeschlagen, den die gebräuchliche Richardson-Zahl, Gr/Re², ersetzen soll. Dieser Parameter kann ohne weiteres auf die maßgebenden Kennzahlen für den relativen Einfluß der erzwungenen und der freien Konvektion reduziert werden,Ra ^1/4/(Re ^1/2 Pr ^1/3) fürPr 1 und (RaPr)^1/4/(RePr)^1/2 fürPr 1. Weiterhin werden neue Koordinaten und abhängige Variablen als Funktion von definiert, so daß für die transformierten Grenzschichtgleichungen numerische Lösungen erstellt werden können, die über den gesamten Bereich der Mischkonvektion, von der freien Konvektion bis zur Zwangskonvektion, für Fluide jeglicher Prandtl-Zahl von 0.001 bis 10.000 gleichmäßig gültig sind. Der Einfluß der Intensität der Mischkonvektion und der Prandtl-Zahl auf die Geschwindigkeitsprofile, die Temperaturprofile, die Wandreibung und den Wärmeübergangskoeffizienten werden für die beiden Fälle der Strömung in und entgegengesetzt zur Schwerkraftrichtung dargestellt.

---

Nomenclature C _f local friction coefficient - C _p specific heat capacity - f reduced stream function - g gravitational acceleration - Gr local Grashoff number,g T _w –T )x³/v² - Nu local Nusselt number - Pr Prandtl number,v/ - Ra local Rayleigh number,g T _w –T x ³/( v) - Re local Reynolds number,u x/v - Ri Richardson number,Gr/Re ² - T fluid temperature - T _w wall temperature - T free stream temperature - u velocity component in thex direction - u free stream velocity - v velocity component in they direction - x vertical coordinate measuring from the leading edge - y horizontal coordinate Greek symbols thermal diffusivity - thermal expansion coefficient - mixed convection parameter (Ra)1/4/Re)^1/2 - pseudo-similarity variable,(y/x) - ₀ conventional similarity variable,(y/x)Re ^1/2 - dimensionless temperature, (T–T T _W –T - unified mixed-flow parameter, [(Re) ^1/2 + (Ra)^1/4] - dynamic viscosity - kinematic viscosity - stretched streamwise coordinate or mixed convection parameter, [1 + (Re)^1/2/(Ra) ^1/4]^–1=/(1 +) - density - Pr/(1 + Pr) _w wall shear stress - stream function - Pr/(l+Pr)^1/3 This research was supported by a grand from the National Science Council of ROC     

Mean and turbulent velocity measurements of supersonic mixing layers

The behavior of supersonic mixing layers under three conditions has been examined by schlieren photography and laser Doppler velocimetry. In the schlieren photographs, some large-scale, repetitive patterns were observed within the mixing layer; however, these structures do not appear to dominate the mixing layer character under the present flow conditions. It was found that higher levels of secondary freestream turbulence did not increase the peak turbulence intensity observed within the mixing layer, but slightly increased the growth rate. Higher levels of freestream turbulence also reduced the axial distance required for development of the mean velocity. At higher convective Mach numbers, the mixing layer growth rate was found to be smaller than that of an incompressible mixing layer at the same velocity and freestream density ratio. The increase in convective Mach number also caused a decrease in the turbulence intensity ( _u/U).List of symbols a speed of sound - b total mixing layer thickness between U ₁ – 0.1 U and U ₂ + 0.1 U - f normalized third moment of u-velocity, f u³/(U)³ - g normalized triple product of u² , g u²/(U)³ - h normalized triple product of u ², h u ²/(U)³ - l _u axial distance for similarity in the mean velocity - l _u axial distance for similarity in the turbulence intensity - M Mach number - M _c convective Mach number (for ₁ = ₂), M _c (U ₁ – U ₂)/(a ₁ + a ₂) - P static pressure - r freestream velocity ratio, r U ₂/U ₁ - Re unit Reynolds number, Re U/ - s freestream density ratio, s ₂/₁ - T _t total temperature - u instantaneous streamwise velocity - u deviation of u-velocity, uu – U - U local mean streamwise velocity - U ₁ primary freestream velocity - U ₂ secondary freestream velocity - average of freestream velocities, (U ₁ + U ₂)/2 - U freestream velocity difference, U U ₁ – U ₂ - instantaneous transverse velocity - v deviation of -velocity, – V - V local mean transverse velocity - x streamwise coordinate - y transverse coordinate - y ₀ transverse location of the mixing layer centerline - ensemble average - ratio of specific heats - boundary layer thickness (y-location at 99.5% of free-stream velocity) - similarity coordinate, (y – y ₀)/b - compressible boundary layer momentum thickness - viscosity - density - standard deviation - dimensionless velocity, (U – U ₂)/U - 1 primary stream - 2 secondary stream A version of this paper was presented at the 11th Symposium on Turbulence, October 17–19, 1988, University of Missouri-Rolla     

Internal loops in pseudoelastic behaviour of Ti-Ni shape memory alloys: Experiment and modelling

The stress-strain isothermal hysteresis loops due to the incomplete martensitic transformation are analysed for Ti-Ni shape memory alloys. Experiments show the existence of two distinct yield lines for phase transition; one for the forward transformation austenitemartensite (AM), the other for the reverse transformation MA. The tensile behaviour of single crystals with only one yield line (AM) [1] can be considered as an ideal case. An extension of a thermodynamic model for pseudoelasticity [2] allows these two yield lines to be taken into account.

---

Sommario Per leghe Ti-Ni con memoria di forma vengono analizzati i cicli di isteresi isotermici tensione-deformazione prodotti da una incompleta trasformazione martensitica. Gli esperimenti mostrano l'esistenza di due distinte linee di snervamento per la transizione di fase, una verso la trasformazione austenitemartensite (AM), l'altra per la trasformazione inversa MA. Il comportamento a trazione di un singolo cristallo con una sola linea di snervamento (AM) [1], può essere considerato un caso ideale. L'estensione ad un modello termodinamico pseudo-elastico [2] consente di analizzare queste due linee di snervamento.

     

Deformation to breaking of deep water gravity waves

The results of laboratory observations of the deformation of deep water gravity waves leading to wave breaking are reported. The specially developed visualization technique which was used is described. A preliminary analysis of the results has led to similar conclusions than recently developed theories. As a main fact, the observed wave breaking appears as the result of, first, a modulational instability which causes the local wave steepness to approach a maximum and, second, a rapidly growing instability leading directly to the breaking.List of symbols L total wave length - H total wave height - crest elevation above still water level - trough depression below still water level - wave steepness =H/L - crest steepness =/L - trough steepness =/L - F ₁ forward horizontal length from zero-upcross point (A) to wave crest - F ₂ backward horizontal length from wave crest to zero-downcross point (B) - crest front steepness =/F ₁ - crest rear steepness =/F ₂ - vertical asymmetry factor=F ₂/F ₁ (describing the wave asymmetry with respect to a vertical axis through the wave crest) - µ horizontal asymmetry factor=/H (describing the wave asymmetry with respect to a horizontal axis: SWL) - T ₀ wavemaker period - L ₀ theoretical wave length of a small amplitude sinusoïdal wave generated at T _inf0 ^sup–1 frequency - ₀ average wave height     

The effect of the sheet rigidity on strength of the spot weld tension shear joint

This paper presents some test and analysis results for a spot welded joint subjected to tensile and alternate load. The effect of sheet rigidity on the tensile strength and fatigue life of the spot welded joint is studied by using the stress intensity factorsK _I,K _II,K _III and an effective stress intensity factor K_max calculated by the finite element method for crack around the nugget. The results show that the effective stress intensity factor K_max is an essential parameter for estimating the fatigue life of the spot welded joint.     

Nonlinear analysis of the forced response of a beam with three mode interaction

An analysis is presented for the primary resonance of a clamped-hinged beam, which occurs when the frequency of excitation is near one of the natural frequencies,_n . Three mode interaction (₂ 3₁ and _{3 1} + 2₂) is considered and its influence on the response is studied. The case of two mode interaction (₂ 3₁) is also considered to compare it with the case of three mode interaction. The straight beam experiencing mid-plane stretching is governed by a nonlinear partial differential equation. By using Galerkin's method the governing equation is reduced to a system of nonautonomous ordinary differential equations. The method of multiple scales is applied to solve the system. Steady-state responses and their stability are examined. Results of numerical investigations show that there exists no significant difference between both modal interactions' influences on the responses.     

Analysis of suddenly started laminar flow in the entrance region of a circular tube

Suddenly started laminar flow in the entrance region of a circular tube, with constant inlet velocity, is investigated analytically by using integral momentum approach. A closed form solution to the integral momentum equation is obtained by the method of characteristics to determine boundary layer thickness, entrance length, velocity profile, and pressure gradient.Nomenclature M(, , ) a function - N(, , ) a function - p pressure - p* p/1/2U ², dimensionless pressure - Q(, , ) a function - R radius of the tube - r radial distance - Re 2RU/, Reynolds number - t time - U inlet velocity, constant for all time, uniform over the cross section - u velocity in the boundary layer - u* u/U, dimensionless velocity - u ₁ velocity in the inviscid core - x axial distance - y distance perpendicular to the axis of the tube - y* y/R, dimensionless distance perpendicular to the axis - boundary layer thickness - * displacement thickness - /R, dimensionless boundary layer thickness - momentum thickness - absolute viscosity of the fluid - /, kinematic viscosity of the fluid - x/(R Re), dimensionless axial distance - density of the fluid - tU/(R Re), dimensionless time - _w wall shear stress     

A note on thermal stresses in hollow cylinders

Conclusions The extensions of Trostel's solutions derived in this paper may be employed tor general over wide conditions with a resulting error less than 3%, the stress values being too small in magnitude by this amount. The error decreases as the variation of physical properties of the media decreases or as 1/2. M. M. Stanii, Lectures in Mathematical Elasticity during summer semester 1958, Purdue University.     

On an inversion theorem for conical regions in elasticity theory

Summary Two-dimensional stress singularities in wedges have already drawn attention since a long time. An inverse square-root stress singularity (in a 360° wedge) plays an important role in fracture mechanics.Recently some similar three-dimensional singularities in conical regions have been investigated, from which one may be also important in fracture mechanics.Spherical coordinates are r, , . The conical region occupied by the elastic homogeneous body (and possible anisotropic) has its vertex at r=0. The mantle of the cone is described by an arbitrary function f(, )=0. The displacement components be u. For special values of (eigenvalues) there exist states of displacements (eigenstates) % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqef0uAJj3BZ9Mz0bYu% H52CGmvzYLMzaerbd9wDYLwzYbItLDharqqr1ngBPrgifHhDYfgasa% acOqpw0xe9v8qqaqFD0xXdHaVhbbf9v8qqaqFr0xc9pk0xbba9q8Wq% Ffea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8frFve9Fve9Ff0dme% GabaqaaiGacaGaamqadaabaeaafiaakabbaaa6daaahjxzL5gapeqa% aiaadwhadaWgaaWcbaGaeqOVdGhabeaakiabg2da9iaadkhadaahaa% WcbeqaaiabeU7aSbaakiaadAgadaWgaaWcbaGaeqOVdGhabeaakiaa% cIcacqaH7oaBcaGGSaGaeqiUdeNaaiilaiabfA6agjaacMcaaaa!582B!\[u_\xi = r^\lambda f_\xi (\lambda ,\theta ,\Phi )\],which may satisfy rather arbitrary homogeneous boundary conditions along the generators.The paper brings a theorem which expresses that if is an eigenvalue, then also-1- is an eigenvalue. Though the theorem is related to a known theorem in Potential Theory (Kelvin's theorem), the proof has to be given along quite another line.

---

Zusammenfassung Zwei-dimensionale Spannungssingularitäten in keilförmigen Gebieten sind schon längere Zeit untersucht worden und neuerdings auch ähnliche drei-dimensionale Singularitäten in konischen Gebieten.Kugelkoordinaten sind r, , . Das konische Gebiet hat seine Spitze in r=0. Der Mantel des Kegels lässt sich beschreiben mittels einer willkürlichen Funktion f(, )=0. Die Verschiebungskomponenten seien u. Für spezielle Werte von (Eigenwerte) bestehen Verschiebunszustände % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqef0uAJj3BZ9Mz0bYu% H52CGmvzYLMzaerbd9wDYLwzYbItLDharqqr1ngBPrgifHhDYfgasa% acOqpw0xe9v8qqaqFD0xXdHaVhbbf9v8qqaqFr0xc9pk0xbba9q8Wq% Ffea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8frFve9Fve9Ff0dme% GabaqaaiGacaGaamqadaabaeaafiaakabbaaa6daaahjxzL5gapeqa% aiaadwhadaWgaaWcbaGaeqOVdGhabeaakiabg2da9iaadkhadaahaa% WcbeqaaiabeU7aSbaakiaadAgadaWgaaWcbaGaeqOVdGhabeaakiaa% cIcacqaH7oaBcaGGSaGaeqiUdeNaaiilaiabfA6agjaacMcaaaa!582B!\[u_\xi = r^\lambda f_\xi (\lambda ,\theta ,\Phi )\],welche homogene Randwerte der Beschreibenden des Kegels entlang genügen.Das Bericht bringt ein Theorem, welches aussagt, das und =–1– beide Eigenwerte sind.

     

The wedge subjected to tractions: a paradox resolved

The classical two-dimensional solution provided by Lévy for the stress distribution in an elastic wedge, loaded by a uniform pressure on one face, becomes infinite when the opening angle 2 of the wedge satisfies the equation tan 2 = 2. Such pathological behavior prompted the investigation in this paper of the stresses and displacements that are induced by tractions of O(r ^–) as r0. The key point is to choose an Airy stress function which generates stresses capable of accommodating unrestricted loading. Fortunately conditions can be derived which pre-determine the form of the necessary Airy stress function. The results show that inhomogeneous boundary conditions can induce stresses of O(r ^–), O(r ^– ln r), or O(r ^– ln² r) as r0, depending on which conditions are satisfied. The stress function used by Williams is sufficient only if the induced stress and displacement behavior is of the power type. The wedge loaded by uniform antisymmetric shear tractions is shown in this paper to exhibit stresses of O(ln r) as r0 for the half-plane or crack geometry. At the critical opening angle 2, uniform antisymmetric normal and symmetric shear tractions also induce the above type of stress singularity. No anticipating such stresses, Lévy used an insufficiently general Airy stress function that led to the observed pathological behavior at 2.     

Transport in ordered and disordered porous media V: Geometrical results for two-dimensional systems

In this paper we continue the geometrical studies of computer generated two-phase systems that were presented in Part IV. In order to reduce the computational time associated with the previous three-dimensional studies, the calculations presented in this work are restricted to two dimensions. This allows us to explore more thoroughly the influence of the size of the averaging volume and to learn something about the use of anon-representative region in the determination of averaged quantities.

Nomenclature

Roman Letters A interfacial area of the– interface associated with the local closure problem, m² - a _i i=1, 2, gaussian probability distribution used to locate the position of particles - l unit tensor - characteristic length for the-phase particles, m - ⁰ reference characteristic length for the-phase particles, m - characteristic length for the-phase, m - _i i=1,2,3 lattice vectors, m - m convolution product weighting function - m _V special convolution product weighting function associated with a unit cell - n _i i=1, 2 integers used to locate the position of particles - n unit normal vector pointing from the-phase toward the-phase - r _p position vector locating the centroid of a particle, m - r gaussian probability distribution used to determine the size of a particle, m - r ₀ characteristic length of an averaging region, m - V averaging volume, m³ - V volume of the-phase contained in the averaging volume,V, m³ - x position of the centroid of an averaging area, m - x ₀ reference position of the centroid of an averaging area, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters V /V, volume average porosity - _{a i} standard deviation ofa _i - _r standard deviation ofr - intrinsic phase average of      

Numerical analysis of the branching of couette flow between concentric cylinders for various wave numbers

The character of stability loss of the circular Couette flow, when the Reynolds number R passes through the critical value R₀, is investigated within a broad range of variation of the wave numbers. The Lyapunov-Schmidt method is used [1, 2]; the boundary-value problems for ordinary differential equations arising in the case of its realization are solved numerically on a computer. It is shown that the branching character substantially depends on the wave number . For all a, excluding a certain interval (₁, ₂), the usual postcritical branching takes place: at a small supercriticality the circular flow loses stability and is softly excited into a secondary stationary flow — stable Taylor vortices. For wave numbers from the interval (₁,₂) a hard excitation of Taylor vortices takes place: at a small subcriticality R=R₀–² the secondary mode is unstable and merges with the Couette flow for 0; however, for a small supercriticality in the neighborhood of a circular flow there exist no stationary modes which are different.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 132–135, May–June, 1976.