Simultaneous determination of Fe, P, Ca, Mg, Zn, and Cu in whole blood by two-jet plasma atomic emission spectrometry

Availability of many biological samples in ample quantity for biomedical investigations sometimes is very restricted. Therefore, there is the need for the simple techniques allowing the analysis of small amount samples. In the present work the two-jet plasma atomic emission spectrometry techniques for the determination of Fe, P, Ca, Mg, Zn, and Cu in whole blood are proposed. The first technique is developed for direct analysis of freeze-dried blood. The sample preparation consisted in a dilution of blood powder (particle size 20 μm or less) with a spectroscopic buffer (graphite powder containing 15 wt.% NaCl). For the analysis of liquid whole blood, previous carbonization (not ashing) of blood evaporated on graphite powder was applied. Calibration samples based on graphite powder containing 15 wt.% NaCl were used. The validation of the techniques was confirmed by the use of different sample preparation procedures (wet acid digestion and dry carbonization), the analysis of IAEA A-13 reference material (freeze-dried bovine whole blood), and the comparison of the results obtained by the proposed technique with the results of the stripping voltammetry technique. Just 20-50 μL of whole blood is quite enough for all determinations. The proposed techniques were successfully applied for the simultaneous determination of Fe, P, Ca, Mg, Zn, and Cu in whole blood of living experimental rats and mice and human blood.     

Determination of copper and nickel in vegetable oils by direct sampling graphite furnace atomic absorption spectrometry

The quality of food products has been receiving great attention due to its influence on human nutrition and health. In this sense, the determination of trace metals in foods has turned an important field on food analysis. Concerning vegetable oils, its metal trace composition is an important criterion for the assessment of their quality once it is known that trace metals affect their rate of oxidation, influencing freshness, keeping properties as well as storage. In the present work an analytical method which enables the direct determination of Cu and Ni in vegetable oils by graphite furnace atomic absorption spectrometry (GFAAS), using a “solid” sample strategy is presented: in nature, samples are directly weighed on the graphite platform boat and inserted in the graphite tube. An adequate temperature program permitted the calibration by external aqueous analytical curves. Good concordance between the proposed procedure and EPA procedures was found in the analysis of real samples. Limits of detection of 0.001 and 0.002 μg g⁻¹ were found for Cu and Ni, respectively, in the original samples, and they were comfortably below the concentrations found.     

High-throughput microwave-digestion procedures to monitor neurotoxic elements in body fluids by means of inductively coupled plasma mass spectrometry

Microwave (MW) digestion procedures with high sample throughput (simultaneous digestion of 36 or 80 samples) and procedural simplicity (disposable plastic tubes, or re-usable liners with screw-cap) were investigated for their efficiency in routine analyses of biological samples. Different digestion vessel materials were tested for metal leaching/adsorption and thermal resistance: quartz, glass, polyethylene (PE) and polystyrene (PS). For the instrumental quantification of Al, Bi, Cd, Co, Cr, Hg, Mn, Mo, Ni, Pb, Sb, and Tl at ultra-trace levels in urine, serum, and whole blood, sector field inductively coupled plasma mass spectrometry (SF-ICP-MS) was used. The different pretreatment conditions and vessels were evaluated in terms of contamination risk, effective power of detection, accuracy, and precision. Results of analyses of serum, urine and whole blood certified reference materials (CRMs) were fully satisfactory for almost all the analytes. In the case of Hg, Mo, and Tl in serum digested in plastic containers the results were just below the lower limit of uncertainty of the certified range. On the basis of the present data the following MW procedures can be suggested: 1. for urine, digestion with nitric acid at atmospheric pressure in plastic vials; 2. for serum, digestion with nitric acid at atmospheric pressure in glass vessels; and 3. for whole blood, digestion under pressure in quartz tubes.Because of the levels of the procedural blanks, Bi was not measurable at the concentrations expected in human fluids, and Al was accurately detectable in whole blood only.     

Sol-gel derived ceramic-carbon enzyme electrodes: Glucose oxidase as a test case

Several types of amperometric biosensors comprised of immobilized glucose oxidase in chemically-modified ceramic-carbon matrices are compared. The electrodes are comprised of several building blocks each performing a specific function. Glucose oxidase is used to catalyze the bio-oxidation of glucose; carbon powder imparts conductivity and favorable electrochemical characteristics; the Ormosil network provides rigidity and porosity; and the organic modification of the Ormosil imparts controlled surface polarity. Additionally, hydrophilic chemical modifiers are incorporated in order to control the size of the wetted, electroactive layer; high dispersion of inert metal catalysts is used to enhance hydrogen peroxide oxidation and redox mediators may be co-immobilized when oxygen independent response is desirable. The electrodes can be prepared either in the form of thick supported film, useful for disposable electrodes or as bulk-modified, disk shape electrodes, which can be used as renewable surface electrodes.     

Thick film biosensors for metabolites in undiluted whole blood and plasma samples

The new electrochemical thick film biosensors from Roche Diagnostics are presented. Following considerations about the principal requirements that biosensors have to fulfil to be useful for diagnostic purposes, the basic design of these thick film biosensors is shown. In this paper, the new generation of biosensors for glucose, lactate and urea are presented, as well as data from a new biosensor for creatinine. All biosensors are designed for multiple use, at minimum 500 samples or 1 week in-use (depending on type of enzyme used), for determinations in undiluted whole blood or plasma, with extra electrodes to compensate for interferences. The sensors are integrated in a disposable cassette requiring 38 microtl sample volume. The analytical ranges of the sensors scope well with the normal and pathological concentrations of metabolites in human blood, e.g. for glucose 0.5-40.0 mmol/L. Both biosensors and interference-compensating electrodes are developed to have a cycle time of 90 s maximum. Method comparison diagrams show excellent correlation of results obtained by biosensors compared to results achieved by reference methods. In addition, the possibility of urea and creatinine determinations in diluted urine is presented.     

Study of Analytical Methods for Iron Determination in Complex Organic Liquids by Atomic Absorption Spectrometry

Abstract

In the determination of iron in complex organic liquids by atomic absorption spectrometry (A. A. S.), methods of sample preparation, such as dilution with an organic solvent and sample pretreatment to destroy organic material, are investigated. Moreover, methods of analysis using calibration curve and standard additions are presented. The possible cause of error associated with iron determination in organic samples by flame (F-A. A. S.) and graphite furnace (GF-A. A. S.) atomic absorption spectrometry are discussed.

From all of these studies, the use of graphite furnace atomic absorption spectrometry after sample dilution with methyl isobutyl ketone, and the use of the method of standard additions are advised for iron determination.     

The role of organic acids in mineral weathering

Organic acids and their anions (for brevity we shall use the term “acids” to include both) may affect mineral weathering rates by at least three mechanisms: by changing the dissolution rate far from equilibrium through decreasing solution pH or forming complexes with cations at the mineral surface; by affecting the saturation state of the solution with respect to the mineral; and by affecting the speciation in solution of ions such as Al³⁺ that themselves affect mineral dissolution rate. In this paper we review the effects of organic acids on the dissolution rates of silicate minerals, particularly feldspars, under conditions approximating the natural weathering environment −25°C, pH 4–7 and with concentrations of organic acids comparable to those measured in soil solutions.

Feldspar dissolution rates far from equilibrium increase with decreasing pH below pH 4–5. They appear to be independent of pH between pH 4–5 and about 8, and above pH 8 feldspar dissolution rates increase with increasing pH.

Small chelating ligands such as oxalate appear to accelerate feldspar dissolution through complexation of Al at the surface of the mineral. Feldspar dissolution rates in the presence of 1 mM oxalic acid show effects ranging from no enhancement to enhancements of a factor of 15, depending upon the data set, pH, and aluminum content of the mineral: there is a great deal of scatter in the available data. In general, concentrations of oxalate of the order of 1 mM are necessary to cause a significant effect. Humic acids do not appear to increase feldspar dissolution rates significantly.

Dissolution rates must decrease as the solution approaches saturation with respect to the primary phase (the chemical affinity effect). Organic acids will influence chemical affinity by complexing Al (and possibly other elements) in solution and hence decreasing the chemical activity of Al³⁺. There are essentially no data on the effect of chemical affinity on feldspar dissolution rate at 25°C and mildly acid pH, so it is hard to evaluate the importance of organic acids in accelerating silicate dissolution through the chemical affinity effect. The effect of complexation of dissolved Al does not appear to be an important determinant of silicate dissolution rates in nature.

Observed rates of silicate weathering in the field are typically much slower than predicted from laboratory experiments far from equilibrium, suggesting control by transport of solutes between “micropores” and “macropores” (“micropores” include fractures and crystal defects within grains). If such transport is rate-controlling, analysis of the effect of organic acids on weathering rates in nature in terms of dissolution rates far from equilibrium may be misleading.     

Preparation and characterization of graphite-coated metallic electrodes: the graphite-sprayed electrode

Graphite-coated metal electrodes were constructed and evaluated for use in voltammetry. Aluminium, copper and platinum electrodes were sprayed with a colloidal solution of graphite particles dispersed in methyl methacrylate polymer. The polishing step was omitted for anodic stripping voltammetry with a mercury film. The resistance is about 1 Ω. Electrode areas are readily reproduced by utilizing metal supports with equal areas. Background currents are very low and useful potential ranges are extended, with −1.3 to +1.7 V vs. SCE being possible, depending on the electrolyte. It is possible to achieve ±0.1% precision for the peak-currents in the electrochemical oxidation of ferrocyanide. For phenol, which is strongly adsorbed, a precision of 2.5% can be achieved by polishing the electrode before each determination.     

Characterisation of Screen-Printed Electrodes for Detection of Heavy Metals

 The characterisation of disposable screen-printed electrodes for stripping analysis is described. The graphite surface of the working electrode is used as substrate for plating a thin mercury film, which allows the electrochemical preconcentration of heavy metals. Optimisation procedures and experimental results are presented. Detection limits around the ppb level were obtained for different metals [Pb(II), Cd(II), Cu(II)]. Received June 6, 1998. Revision November 10, 1988.     

Disposable Graphite Foil Based Electrodes and Their Application in Pharmaceutical Analysis

This paper explores a new source of graphite for working electrodes, which presents advantages such as low electrical resistance, good flexibility, favorable mechanical performance, versatility to design electrodes in almost any size and very low cost. The new electrodes were investigated in batch electrochemical cells as associated with flow injection analysis systems. Cyclic voltammetry, stripping voltammetry, and amperometry associated with flow injection analysis techniques were applied for the determination of ascorbic acid, zinc and paracetamol in pharmaceutical formulations, respectively. Well‐established analytical methods were applied for comparison purposes. The results herein demonstrate the potential of graphite foils as working electrodes in different electroanalytical methods, offering the possibility of producing disposable sensors for routine applications.     

脉冲溶出伏安法中汞膜碳纤维电极性能的研究

采用脉冲阳极溶出伏安法,研究了汞膜碳纤维电极测定痕量金属离子的行为,并与汞膜玻碳电极和悬汞电极进行了系统的对比,显示了碳纤维电极在静止态溶液、极稀溶液、有机溶液和双电极体系中具有特殊的优越性。本文对该电极的制作,预处理和实际测试条件进行了探讨。     

环境水样中硒形态分析的样品预处理

综述了近几年来测定环境水样中硒的样品前处理方法,主要包括样品消解,加入基体改进剂和分离富集3个方面。消解法中主要使用湿法消解;加入基体改进剂适用于石墨炉原子吸收光谱法的样品预处理,可以提高硒的灰化温度,减少硒的损失以及样品中基体的干扰;固相萃取法是萃取法的主要使用手段。     

Direct identification of organic inclusions in graphite on the basis of field desorption mass spectrometry

A method for the direct identification of organic inclusions in graphite on the basis of field desorption mass spectrometry is proposed, based on the possibility of using a fractured graphite sample as a field emitter. Under such circumstances, the organic inclusions adsorbed on the surface of the microcrystallites of modified graphites may be directly field desorbed and identified by their mass spectra without any pretreatment of the sample. Two differently modified types of graphite were analysed by this method and the nature of the admixtures was established: one sample appeared to contain a mixture of polymethylsiloxanes and the other and blend of dyes. For the latter sample, temperature fractionation of admixed substances was performed and the presence of three individual dyes was established. Such features of field desorption as the production of abundant molecular ions with negligible fragmentation and the possibility of obtaining of mass thermograms greatly facilitate the identification of individual components of mixture inclusions.     

Mixed polyelectrolyte coatings on glassy carbon electrodes: Ion-exchange, permselectivity properties and analytical application of poly-l-lysine-poly(sodium 4-styrenesulfonate)-coated mercury film electrodes for the detection of trace metals

The present work describes the preparation, optimization and characterization of mixed polyelectrolyte coatings of poly-l-lysine (PLL) and poly(sodium 4-styrenesulfonate) (PSS) for the modification of thin mercury film electrodes (MFEs). The novel-modified electrodes were applied in the direct analysis of trace metals in estuarine waters by square-wave anodic stripping voltammetry (SWASV). The effects of the coating morphology and thickness and also of the monomeric molar ratio PLL/PSS on the cation-exchange ability of the PLL–PSS polyelectrolyte coatings onto glassy carbon (GC) were evaluated using target cationic species such as dopamine (DA) or lead cation. Further, the semi-permeability of the PLL–PSS-coated electrodes based both on electrostatic interactions and on molecular size leads to an improved anti-fouling ability against several tensioactive species. The analytical usefulness of the PLL–PSS-mixed polyelectrolyte coatings on thin mercury film electrodes is demonstrated via SWASV measurements of trace metals (lead, copper and cadmium at the low nanomolar level; accumulation time of 180 s) in estuarine waters containing moderate levels of dissolved organic matter, resulting in a fast and direct methodology requiring no sample pretreatment.     

A stannum-bismuth composite film electrode for simultaneous determination of zinc(II) and cadmium(II) using differential pulse anodic stripping voltammetry

The development and use of 'green' electrode materials is extremely attractive for the routine use of disposable metal sensors. Bismuth is an environmentally-friendly element and a bismuth film electrode was proposed as an alternative to mercury film electrodes. Compared with bismuth, stannum is a more 'environmentally friendly' material. The stannum-bismuth composite film electrode prepared by the in situ electrodeposition of stannum and bismuth on the glassy carbon substrate is reported for the first time. Compared with bismuth film and stannum film electrodes, the stannum-bismuth composite film electrode revealed better electroanalytical performance, and can be used as a possible alternative electrode for electrochemical stripping analysis of trace heavy metals.     

Polymer-Mercury Coated Screen-Printed Sensors for Electrochemical Stripping Analysis of Heavy Metals

In the perspective of in-field stripping analysis of heavy metals, the use and disposal of toxic mercury solutions (necessary to plate a mercury film on a carbon electrode surface) presents a problem. The aim of this work was the development of mercury coated screen-printed electrodes previously prepared in the lab and ready to use in-field. Thus some commercially available polymers like Nafion®, Eastman Kodak AQ29®, and Methocel® were investigated as mercury entrapping systems for electrochemical stripping analysis of heavy metals. Screen-printed disposable cells with a silver pseudo-reference electrode, a graphite counter electrode, and a graphite working electrode were used. To modify the sensor, the polymer solution was cast onto the carbon working electrode surface. Detection limits of 0.8 and 1 μg/L were obtained for lead and cadmium respectively. Since Methocel® based electrodes showed the best performance, they were used for the analysis of real samples. The results were compared with those obtained using a classical thin mercury film electrode and ICP spectroscopy.

All the experiments reported here were performed in un-deareated solutions as required for in-field analysis.     

新型样品前处理材料在环境污染物分析检测中的研究进展

针对复杂样品的分析和痕量目标物的检测,样品前处理是必不可少的,高效的样品前处理技术不仅可以去除或减小样品基质干扰而且能够实现分析物的富集,提高分析检测的准确性和灵敏度。近年来,固相萃取、磁分散固相萃取、枪头固相萃取、搅拌棒萃取、固相微萃取等高效的样品前处理技术已在环境污染物分析检测中获得广泛关注,萃取效率主要取决于萃取材料,所以新型的高效萃取材料一直是样品前处理研究领域的重要发展方向。该文总结和讨论了近年来新型样品前处理材料在环境污染物分析检测中的研究进展,主要聚焦在石墨烯、氧化石墨烯、碳纳米管、无机气凝胶、有机气凝胶、三嗪基功能材料、三嗪基聚合物、分子印迹聚合物、共价有机框架材料、金属有机框架材料以及它们的功能化萃取材料等。这些材料已经被应用于环境样品中不同类别污染物的萃取富集,如重金属离子、多环芳烃、塑化剂、烷烃、苯酚、氯酚、氯苯、多溴联苯醚、全氟磺酸、全氟羧酸、雌激素、药物残留、农药残留等。这些样品前处理材料具有高的表面积、大量的吸附位点,并涉及多种萃取机理如π-π、静电、疏水、亲水、氢键、卤键等相互作用。基于这些萃取材料的多种样品前处理技术与各类检测方法如色谱、质谱、原子吸收光谱、荧光光谱、离子迁移谱等相结合,已广泛应用于环境污染物的高灵敏分析检测。最后,该文总结了样品前处理发展中存在的问题,并展望了其未来在环境分析中的发展趋势。     

The rapid determination of water of hydration in magnesium perchlorate desiccant

The efficiency of “anhydrous” magnesium perchlorate as a desiccant, and its capacity in absorption of water vapour, ammonia gas, alcohol vapour, and other highly volatile organic vapours, is dependent upon the extent to which its water of hydration is removed in preparation for commercial distribution. American Chemical Society “Reagent Chemicals” specifications call for not more than 10% water as a maximum tolerance. The product is, by intent, not ordinarily manufactured for distribution in the completely dehydrated form and regularly contains approximately 5% unremoved water of hydration. This is the regular practice to insure a less friable granular structure than would result from complete dehydration. The method here described for the determination of its water content is rapid in application, sufficiently accurate for all practical demand, and requires very simple apparatus and manipulative details.     

New chelating sorbents for noble metals

The properties of the new ehelate-forming “POLYORGS” sorbents for concentration of noble metals are discussed. POLYORGS are made from different polymeric matrices (polystyrene, copolymers of styréne with divinylbenzene, fibrous materials). They contain heterocyclic amine and amidoxime groups, and are selective for noble metals. Some methods of noble metal determination after preliminary concentration of POLYORGS sorbents are given.     

Etude electrochimique du complexe phenylene-bis(salicylidene iminato)cobalt en solution et du complexe polycondense en solution et fixe sur l'electrode. Application a la reduction electroassistee du chlrure de benzyle

The electrochemical behaviour of CoSaloph (Salopy  phenylbis(salicylidene-iminato) was investigated in solution in organic solvents.The polymer complexes Co(Saloph)_n have been prepared and modified electrodes coated with a film of polymer or with a mixture of graphite and polymer have been prepared and their electrochemical properties compared to those of the monomer.Quantitative electro-assisted reduction of benzyl chloride at controlled potential was performed with both types of complexes. In spite of poor yields, this example demonstrates the possibility of the transposition of homogeneous catalysis with coordination compounds on modified electrodes in the field of organic electro-synthesis.