Mechanism and Dynamics of the Addition of Lithium Hydride to Acetylene

Reaction ergodography for the addition of lithium hydride to acetylene indicates that the lithium hydride, in both monomeric and dimeric forms, reacts with the acetylene via two similar and competitive pathways. Hence, we have obtained the pseudo-first-order rate constant of this reaction.     

Numerical Kekulé structures of fullerenes and partitioning of pi-electrons to pentagonal and hexagonal rings

We calculated the partitioning of pi-electrons within individual pentagonal and hexagonal rings of fullerenes for a collection of fullerenes from C20 to C72 by constructing their Kekulé valence structures and averaging the pi-electron content of individual rings over all Kekulé valence structures. The resulting information is collected in Table 2, which when combined with the Schlegel diagram of fullerenes (illustrated in Figure 7) uniquely characterizes each of the 19 fullerenes considered. The results are interpreted as the basic information on the distributions (variation) of the local (ring) pi-electron density.     

Preparation of PLL-PEG-PLL and its application to DNA encapsulation

With the successful sequencing of Human Genome, it would be possible to cure all diseases by gene ther- apy in the near future. However, one of the major problems in gene therapy is the development of gene vectors. To date, there are two kinds of gene vectors, namely, viral and non-viral gene vectors. Viruses are widely used as vectors in gene therapy, with the trans- fection efficiency being relatively high, but they have the safety problems such as immunogenicity, non- biocompatibility and …     

Deformation Potential Approach to the Calculation of Mobilities of Carriers and Conductivity of trans-Polymonocyanoacetylene

The deformation potential theory for one-dimensional organic polymer is studied. This approximation is then used to calculate the mobilities of carriers and the conductivity of trans-polymonocyanoacetylene (PMCA). The results of calculations are in fairly good agreement with experimental data.     

Preparation of Chelating Cellulose Filters and Their Application to the Separation and Enrichment of Trace Elements

ＰｒｅｐａｒａｔｉｏｎｏｆＣｈｅｌａｔｉｎｇＣｅｌｌｕｌｏｓｅＦｉｌｔｅｒｓａｎｄＴｈｅｉｒＡｐｐｌｉｃａｔｉｏｎｔｏｔｈｅＳｅｐａｒａｔｉｏｎａｎｄＥｎｒｉｃｈｍｅｎｔｏｆＴｒａｃｅＥｌｅｍｅｎｔｓＬＩＵＣｈｕｎ－ｍｉｎｇ（Ｄｅｐａｒｔｍｅｎｔｏｆ...     

Use of Electrical Resistance to Detect the Formation and Decomposition of Methane Hydrate

The changes of electrical resistance(R)were studied experimentally in the process of CH_4 hydrate formation and decomposition,using temperature and pressure as the auxiliary detecting methods simultaneously.The experiment results show that R increases with hydrate formation and decreases with hydrate decompositon.R is more sensitive to hydrate formation and decompositon than temperature or pressure,which indicates that the detection of R will be an effective means for detecting natural gas hydrate(NGH)quantitatively.     

Spectroscopic Study of the Interactions of Buflomedil to Serum Albumin and β-Cyclodextrin

The effects of buflomedil (BFM), a novel cerebrovascular medicine, on serum albumin and the feasibility of ??-cyclodextrin (??-CD) acting as a controlled releaser for BFM were investigated by molecular spectroscopy methods, including fluorescence emission, UV?Cvisible absorption, Fourier transform infrared (FT-IR), synchronous and three-dimensional fluorescence spectroscopies. The interaction of BFM with bovine serum albumin (BSA) was analyzed by fluorescence quenching and it was found that BFM had reacted with BSA in the ground state and had affected the secondary structure of BSA. The observed binding constant K _b, the number of binding sites n, the distance r between donor (BSA) and acceptor (BFM), the enthalpy change (??H ^?? ), Gibbs energy change (??G ^?? ) and entropy change (??S ^?? ) at different temperatures were calculated. The inclusion reaction between ??-CD and BFM was explored by the Lineweaver?CBurk equation. The inclusion constants and the thermodynamic parameters were determined. The mechanism of the inclusion reaction was discussed and the controlled release characteristics of ??-CD to BFM were considered at the molecule level.     

Acid-catalyzed regioselective sulfamination of γ-amino-alkenes and stereoselective rearrangement of pyrrolidines to piperidines

This paper describes efficient acid-catalyzed regioselective sulfamination of γ-amino-alkenes to form pyrrolidines and stereoselective rearrangement of pyrrolidines to piperidines. A possible reaction mechanism has been proposed.     

Silylene transfer to α-keto esters and application to the synthesis of γ-lactones

Disubstituted α-hydroxy acids have been synthesized by metal-catalyzed silylene transfer to α-keto esters. A range of substituents are tolerated in the transformation with the exception of branched groups at the vinylic position. The α-hydroxy acid products can be converted into γ-lactones using a variety of lactonization conditions.     

Synthesis of β-Enaminoesters and Lactams by Michael Addition of N-Benzylaniline to New Allenic Esters and Lactams

The synthesis of original allenic lactams 2 and allenic esters 5 is presented and their Michael condensation with N-benzylaniline described.     

Contributions to Forming and Analytical Investigations of Solutions of Cellulose and Cellulose Derivatives – A Research and Development Topic of the TITK eV

Modification, forming and analytical characterisation of cellulose and cellulose solutions represents one of the most important research topics of the Thuringian Institute for Textiles and Plastics Research (TITK). The presentation provides information on the current capabilities of the institute and on the analytical methods developed in these fields.     

Hypersensitivity and its application to structural analysis of lanthanide complexes

Hypersensitivity of the ternary complexes Ln(β-dik)4HMQ(where Ln=Nd, Ho, Er,β-dik=acetylacetonate(AA), dibenzoylmethanate(DBM) and MQ=4-methylquinoline) in acetone solution is studied based on the dynamic coupling model. The structures of these complexes in solution are deduced. Their coordination polyhedrons are all distorted square antiprism. Neodymium complexes have D2 symmetry, while holmium and erbium complexes have exact D2d symmetry.     

Enantio and diastereoselective addition of phenylacetylene to racemic α-chloroketones

In this report, we have presented the first diastereoselective addition of phenylacetylene to chiral racemic chloroketones. The addition is controlled by the reactivity of the chloroketones that allowed the stereoselective reaction to be performed at -20 °C. Chiral racemic chloroketones are used in the reaction. By carefully controlling the temperature and the reaction time we were able to isolate the corresponding products in moderate yields and with good, simple and predictable facial stereoselection. Our reaction is a rare example of the use of chiral ketones in an enantioselective alkynylation reaction and opens new perspectives for the formation of chiral quaternary stereocenters.     

Effects of Temperature and Common Ions on Binding of Puerarin to BSA

The effects of temperature and common ions on binding of puerarin to bovine serum albumin (BSA) are investigated. The binding constants (K _a) between puerarin and BSA are 1.13×10⁴ L⋅mol⁻¹ (20 °C) and 1.54×10⁴ L⋅mol⁻¹ (30 °C), and the number of binding sites (n) is (0.95±0.02). However, at a higher temperature (40 °C) the stability of the puerarin–BSA system decreases, which results in a lower binding constant (1.58×10³ L⋅mol⁻¹) and number of binding sites (n=0.73) of the puerarin–BSA system. However, the presence of Cu²⁺ and Fe³⁺ ions increases the binding constants and the number of binding sites in the puerarin–BSA complex.     

Effects of Temperature and Catalyst to Oil Weight Ratio on the Catalytic Conversion of Heavy Oil to Propylene Using ZSM-5 and USY Catalysts

It is useful for practical operation to study the rules of production of propylene by the catalytic conversion of heavy oil in FCC (fluid catalytic cracking). The effects of temperature and C/O ratio (catalyst to oil weight ratio) on the distribution of the product and the yield of propylene were investigated on a micro reactor unit with two model catalysts, namely ZSM-5/Al2O3 and USY/Al2O3, and Fushun vacuum gas oil (VGO) was used as the feedstock. The conversion of heavy oil over ZSM-5 catalyst can be comparable to that of USY catalyst at high temperature and high C/O ratio. The rate of conversion of heavy oil using the ZSM-5 equilibrium catalyst is lower compared with the USY equilibrium catalyst under the general FCC conditions and this can be attributed to the poor steam ability of the ZSM-5 equilibrium catalyst. The difference in pore topologies of USY and ZSM-5 is the reason why the principal products for the above two catalysts is different, namely gasoline and liquid petroleum gas (LPG), repspectively. So the LPG selectivity, especially the propylene selectivity, may decline if USY is added into the FCC catalyst for maximizing the production of propylene. Increasing the C/O ratio is the most economical method for the increase of LPG yield than the increase of the temperature of the two model catalysts, because the loss of light oil is less in the former case. There is an inverse correlation between HTC (hydrogen transfer coefficient) and the yield of propylene, and restricting the hydrogen transfer reaction is the more important measure in increasing the yield of propylene of the ZSM-5 catalyst. The ethylene yield of ZSM-5/Al2O3 is higher, but the gaseous side products with low value are not enhanced when ZSM-5 catalyst is used. Moreover, for LPG and the end products, dry gas and coke, their ranges of reaction conditions to which their yields are dependent are different, and that of end products is more severe than that of LPG. So it is clear that maximizing LPG and propylene and restricting dry gas and coke can be both achieved via increasing the severity of reaction conditions among the range of reaction conditions which LPG yield is sensitive to.     

Photoreactions of β-aziridinylacrylonitriles and acrylates with alkenes: formation of head-to-head adducts and application to the preparation of pyrrolizidine alkaloid

The photochemical C,C-bond cleavage of N-benzyl β-aziridinylacrylonitrile 1 and acrylate 2 and the subsequent [3+2] cycloaddition with electron-deficient alkenes afforded head-to-head adducts selectively and efficiently. Irradiation of N-phenyl aziridine 3 with acrylonitrile gave adducts, but photoreaction of N-benzoyl aziridine 4 and thermal reactions of 3 and 4 with alkenes yielded C(γ),N-cleaved products instead of cycloadducts. N-trityl aziridine 5 also reacted with electron-deficient alkenes, affording 2,3-cis-pyrrolidine derivatives exclusively. A formal synthesis of a pyrrolizidine alkaloid, isoretronecanol (27), starting from 5 was achieved in a convenient manner.     

Synthesis of Bis—N—squaramidoacids and their Applications to Asymmetric Reduction of Prochiral Ketone and Diketones

A series of novel bis-squaramidoacid ligands were prepared. Prochiral ketone and diketones were direct reduced by borane in the presence of these ligands giving secondary alcohol products with enantiomeric excesses up to 64.2% for ω-bromoacetophenone and 90.0% for 1,6-diphenyl- 1, 6-hexanedione.