Neptunium determination by inductively coupled plasma mass spectrometry (ICP-MS)

The determination of neptunium-237 (²³⁷Np) traditionally has been performed by alpha spectrometry or neutron activation analysis. These methods are labor intensive and require several days for completion. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is a possible alternative for²³⁷Np determinations. This paper describes the analytical method developed for samples that have significant levels of uranium present. The lower reporting limits achievable by ICP-MS are competitive with the counting methods, but the real advantage for this laboratory lies in the lower cost and faster turnaround time provided by ICP-MS.     

The determination of selenium in serum and urine by inductively coupled plasma mass spectrometry: comparison with Zeeman graphite furnace atomic absorption spectrometry

An inductively Coupled Plasma Mass Spectrometric (ICPMS) method for the determination of selenium in both serum and urine is described. ⁷⁸Se is used analytically in spite of ³⁸Ar⁴⁰Ar isobaric interference at mass 78. Initially ⁸²Se was monitored but, limited isotope abundance and therefore limited detection capability for urine selenium precluded continued use. An ethanol–Triton X-100-nitric acid diluent was used to dilute serum and urine and enhance selenium ionization so that both serum and urine can be analyzed with the same calibration curve. Results derived by the ICPMS method were compared with Zeeman Graphite Furnace Atomic Absorption Spectrometry (ZGFAAS) using nickel as the matrix modifier. Detection limits for ZGFAAS and ICPMS using mass 78 are 2.9 and 0.25 μg/l, respectively. ICPMS and ZGFAAS instrument responses were recorded for additions of inorganic selenium, trimethylselenonium iodide, seleno-dl-methionine, and seleno-dl-cystine to urine and serum. ICPMS slopes for all compounds added to urine and serum were found to be nearly identical. ZGFAAS response for each compound was more variable than ICPMS. ZGFAAS response for trimethylselenonium iodide was approximately 3-fold lower than for the other compounds. ZGFAAS regression slopes and correlation coefficients were 0.72 and 0.8139 for reference urine samples. ICPMS regression slope and correlation coefficient vs. the reference target values were 0.95 and 0.9700 for the same urines. Regressions slopes and correlation coefficients for reference sera were 1.01 and 0.9912 for ICPMS and 1.12 and 0.9648 for ZGFAAS. We conclude that ICPMS produced more accurate results than ZGFAAS for selenium in serum and urine.     

Determination of plutonium by inductively coupled plasma mass spectrometry (ICP-MS)

Inductively coupled plasma mass spectrometry (ICP-MS) has been applied to the measurement of plutonium isotopes in soils. In the ICP-MS, a calibration curve method was conveniently utilized even in high viscosity solution using a Babington nebulizer. Plutonium concentrations in soil around the Kashiwazaki-Kariwa nuclear power station were found to be in the range of 0.054 to 1.0 Bq/kg with an average of 0.27 Bq/kg. The ratios of ²³⁹Pu/²⁴⁰Pu were also obtained with the ICP-MS to investigate the origin of Pu-isotopes. On the basis of this result, the origin of the Pu-isotopes was attributed to be fallout from the past atmospheric nuclear tests.     

Efficiency of sample introduction into inductively coupled plasma by graphite furnace electrothermal vaporization

A laboratory constructed graphite furnace electrothermal vaporizer (GF-ETV) was used for studying transport efficiencies. This device enables collection of the vaporization products that exit the central sampling hole of the horizontal graphite tube. For determination of the transport efficiency between the GF-ETV and the ICP-torch three methods were tested: (1) deposition of the aerosol particles and the vapour of certain elements by mixing the vaporization product with supersaturated steam and subsequent condensation (direct method); (2) dissolution of the deposited sample fraction from the interface components (indirect method); and (3) calculation from line intensities when applying GF-ETV and pneumatic nebulization sample introduction methods using mercury as a reference element. The latter, `mercury reference method' required 100% transport efficiency for mercury with the ETV, which could be approximated with the use of argon as carrier gas (without halocarbon addition). With a 200 cm³/min flow rate of internal argon in the graphite tube, the transport efficiency was between 67 and 76% for medium volatility elements (Cu, Mn and Mg) and between 32 and 38% for volatile elements (Cd and Zn). By adding carbon tetrachloride vapour to the internal argon flow, the transport efficiency increased to 67–73% for the five elements studied.     

Application of ZrC-coated tubes to the determination of aluminum in serum by graphite furnace atomic absorption spectroscopy

An improved method for the determination of aluminum in serum by atomic absorption spectrometry with a graphite furnace is presented. The method is suitable for the analysis of serum samples having normal and elevated aluminum content. The serum sample can be analyzed diluted or undiluted because the selected temperatures program minimizes the matrix interferences. High temperatures are made possible by the use of graphite Zr-coated tubes. The detection limit is 0.7 μg Al/liter. The coefficient of variation is 3.2% for serum concentration of 5 μg Al/liter and 1% for serum concentration of 50 μg Al/liter.     

A novel quantification strategy of transferrin and albumin in human serum by species-unspecific isotope dilution laser ablation inductively coupled plasma mass spectrometry (ICP-MS)

Species-specific (SS) isotope dilution analysis with gel electrophoresis (GE)-laser ablation (LA)-ICP-MS is a promising technique for the quantification of particular metal-binding proteins in biological samples. However, unavailable isotopically enriched spike and metal losses in GE separation are main limitations for SS-isotope dilution PAGE-LA-ICP-MS. In this study, we report for the first time the absolute quantification of transferrin (Tf) and albumin (Alb) in human serum by non-denaturing (native) GE combined with species-unspecific isotope dilution mass spectrometry (IDMS). In order to achieve a homogeneous distribution of both protein and isotope-enriched spike (simulated isotope equilibration), immersing the protein strips with ³⁴S spike solution after gel electrophoresis was demonstrated to be an effective way of spike addition. Furthermore, effects of immersion time and ³⁴S spike concentration were investigated to obtain optimal conditions of the post-electrophoresis isotope dilution method. The relative mass of spike and ablated sample (m_sp/m_sam) in IDMS equation was calculated by standard Tf and Alb proteins, which could be applied to the quantification of Tf and Alb in ERM-DA470k/IFCC for method confirmation. The results were in agreement with the certified value with good precision and small uncertainty (1.5–3%). In this method, species-specific spike protein is not necessary and the integrity of the heteroatom-protein could be maintained in sample preparation process. Moreover, the application of species-unspecific isotope dilution GE-LA-ICP-MS has the potential to offer reliable, direct and simultaneous quantification of proteins after conventional 1D and 2D gel electrophoretic separations.     

“Age” determination of irradiated materials utilizing inductively coupled plasma mass spectrometric (ICP-MS) detection

A gas pressurized extraction chromatography (GPEC) system has been developed to perform elemental separations on radioactive samples to determine total and isotopic compositions of Cs and Ba from an irradiated salt sample, fuel sample and two sealed radiation sources. The GPEC system employs compressed nitrogen to move liquid through the system, compared to gravity or pumped liquids that are typically used for separations. A commercially available Sr-Resin™ was used to perform the separation for the above mentioned analytes. A 1% acetic acid solution was determined to be the best extractant for Ba. A flow rate of 0.1 mL/min was determined to be optimal for the separation of Ba. Complete recovery of the Cs and Ba was achieved, within the systematic uncertainties of the experiments.     

碱熔样-ICP-MS直接分析高纯稀土荧光粉中微量杂质元素

建立一种碱熔样-ICP-MS直接分析稀土荧光粉中微量杂质元素(非稀土杂质和稀土杂质元素)的新方法。此方法测定限达到：非稀土元素0.007-1.036μg/g,稀土元素0.001-0.057μg/g,精密度<10%。方法预处理简单、检出限低、重现性好,为高纯稀土荧光粉成品的质量控制提供了可靠地分析手段。     

Validated method for the determination of platinum from a liposomal source (SPI-77) in human plasma using graphite furnace Zeeman atomic absorption spectrometry

A sensitive analytical method based on flameless atomic absorption spectrometry with Zeeman correction has been validated for the quantitative determination in human plasma of platinum originating from cisplatin in a liposomal source, SPI-77. The performance of the method was acceptable over a sample concentration range of 0. 125-1.25 micromol platinum/L and the lower limit of quantification was determined to be 1.25 micromol platinum/L in undiluted clinical samples. The performance data of the assay were investigated using both a calibration curve with carboplatin in plasma ultrafiltrate and diluted human plasma samples spiked with SPI-77. The recoveries, between-day and the within-day precisions of both methods of calibration were not significantly different allowing carboplatin ultrafiltrate calibration standards to be used to quantify platinum derived from SPI-77 in human plasma. Apparently, the liposomal formulation had no significant influence on the determination of platinum. The usefulness of the presented method was demonstrated in a phase I clinical and pharmacokinetic study. In addition, in vitro experiments were carried out to determine the distribution of SPI-77 in blood. The results indicated that platinum from SPI-77 mainly concentrates in plasma and that binding to and/or endocytosis in red blood cells is negligible.     

Validated method for the determination of platinum from a liposomal source (SPI-77) in human plasma using graphite furnace Zeeman atomic absorption spectrometry

A sensitive analytical method based on flameless atomic absorption spectrometry with Zeeman correction has been validated for the quantitative determination in human plasma of platinum originating from cisplatin in a liposomal source, SPI-77. The performance of the method was acceptable over a sample concentration range of 0.125–1.25 μmol platinum/L and the lower limit of quantification was determined to be 1.25 μmol platinum/L in undiluted clinical samples. The performance data of the assay were investigated using both a calibration curve with carboplatin in plasma ultrafiltrate and diluted human plasma samples spiked with SPI-77. The recoveries, between-day and the within-day precisions of both methods of calibration were not significantly different allowing carboplatin ultrafiltrate calibration standards to be used to quantify platinum derived from SPI-77 in human plasma. Apparently, the liposomal formulation had no significant influence on the determination of platinum. The usefulness of the presented method was demonstrated in a phase I clinical and pharmacokinetic study. In addition, in vitro experiments were carried out to determine the distribution of SPI-77 in blood. The results indicated that platinum from SPI-77 mainly concentrates in plasma and that binding to and/or endocytosis in red blood cells is negligible.     

Determination of trace elements in marine plankton by inductively coupled plasma mass spectrometry (ICP-MS)

A method has been developed for the determination of 23 elements in marine plankton in which inductively coupled plasma (ICP) source mass spectrometry (MS) was used to quantify the elements in the solution after digestion in a mixture of hydrofluoric and nitric acids in sealed PTFE vessels in a microwave field. The procedure was validated by the analysis of a standard reference soil (SRM 2709 San Joaquin Soil) and a standard reference fresh water plankton (CRM 414). The method was applied to the analysis of several marine plankton samples grown under controlled conditions including several whose growth media had been enriched with selenium. Matrix induced signal suppressions and instrumental drift were corrected by internal standardization. The suitabilities of germanium, indium, rhodium, scandium and yttrium as internal standard elements were evaluated. Neither scandium nor yttrium could be used due to the presence of these elements in the samples, germanium was used for the determination of As, Co, Cu, Fe, Ni, Se, Si and Zn, indium was used for Al, Ba, Ca, Eu, Sr, and Tl, and rhodium was used for Cd, Cr, Hg, Mg, Pb, Sb, Sn, and V. For Al, Ca, Cr, Cu, Fe, Mg, Mn, Ni, Si, Sr, V, and Zn internal standardization did not completely compensate for the suppressive effect of the heavier elements and the solutions were diluted. However, for As, Ba, Cd, Co, Eu, Hg, Pb, Sb, Se, Sn and Tl, it was possible to obtain accurate results despite the 35–¶40% suppression in the signals. Isobaric overlap was only a problem in the cases of ⁴²Ca and ⁷⁸Se; ⁴⁴Ca and ⁷⁷Se, respectively, were used. Memory effects were only observed with Hg for which a nitric acid-sodium chloride solution was the most effective wash-out solution. The marine plankton samples were able to tolerate a higher concentration of Hg as the selenium concentration increased.     

电感耦合等离子体质谱法测定血液和精液中的硼

采用HNO3-H2O2和氨水-甘露醇两种方法处理样品,电感耦合等离子体质谱法（ICP-MS）测定血液和精液中的硼。Be作内标补偿基体效应,并用标准加入法验证了方法的可靠性,标准加入法与外标法测定结果相吻合。在测定B的同时,还可进行Cr、Cu、Cd、Ba、Sr、Mn、Co、Tl、Li、Pb、Zn、Sc、Ti、V、As等多元素测定。两种样品处理方法的测定值呈显著正相关（r=0.99919）。方法检出限为0．11ng／mL（氨水-甘露醇法）,0.06ng／mL（HNO3-H2O2）。已用于测定某硼矿区血液和精液样品中的硼。     

Determination of trace elements in marine plankton by inductively coupled plasma mass spectrometry (ICP-MS)

A method has been developed for the determination of 23 elements in marine plankton in which inductively coupled plasma (ICP) source mass spectrometry (MS) was used to quantify the elements in the solution after digestion in a mixture of hydrofluoric and nitric acids in sealed PTFE vessels in a microwave field. The procedure was validated by the analysis of a standard reference soil (SRM 2709 San Joaquin Soil) and a standard reference fresh water plankton (CRM 414). The method was applied to the analysis of several marine plankton samples grown under controlled conditions including several whose growth media had been enriched with selenium. Matrix induced signal suppressions and instrumental drift were corrected by internal standardization. The suitabilities of germanium, indium, rhodium, scandium and yttrium as internal standard elements were evaluated. Neither scandium nor yttrium could be used due to the presence of these elements in the samples, germanium was used for the determination of As, Co, Cu, Fe, Ni, Se, Si and Zn, indium was used for Al, Ba, Ca, Eu, Sr, and Tl, and rhodium was used for Cd, Cr, Hg, Mg, Pb, Sb, Sn, and V. For Al, Ca, Cr, Cu, Fe, Mg, Mn, Ni, Si, Sr, V, and Zn internal standardization did not completely compensate for the suppressive effect of the heavier elements and the solutions were diluted. However, for As, Ba, Cd, Co, Eu, Hg, Pb, Sb, Se, Sn and T1, it was possible to obtain accurate results despite the 35-40% suppression in the signals. Isobaric overlap was only a problem in the cases of 42Ca and 78Se; 44Ca and 77Se, respectively, were used. Memory effects were only observed with Hg for which a nitric acid-sodium chloride solution was the most effective wash-out solution. The marine plankton samples were able to tolerate a higher concentration of Hg as the selenium concentration increased.     

Determination of impurities in micro-amounts of silver alloys by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) after in-situ-digestion in the graphite furnace

Forgeries of antique silver objects can be identified by their fingerprints of impurities. The dissolution of the samples causes severe problems since Au and Ag have to be dissolved simultaneously. In order to overcome that difficulty and to minimize the amount of sample, an ETV-ICP-MS method is presented based on solid sampling and an in-situ-digestion with nitric acid in a graphite tube. Determinations of Au, Bi, Cd, Pb, Sb, Sn and Zn were performed in a range of 10 μg/g–1% and with an accuracy of 10%–50%. Less than 1 mg sample material is required.     

电感耦合等离子体质谱法(ICP-MS)测定废水中有害元素银的含量

为了寻求一种更加适合废水中低含量银的测定方法,本文采用石墨电热板消解-电感耦合等离子体质谱法测定废水中的低含量银离子。通过仪器工作条件最优化、测定线性回归方程、检出限、准确度、精密度、实际样品加标回收率,并与电感耦合等离子体发射光谱法（ICP-AES）的实际样品测定结果进行比对来评价该方法的实用性。石墨电热板消解-电感耦合等离子体质谱法前处理方法简便,分析速度快且该方法检出限较低,为0.03ug/L,标准样品测定的相对误差为-0.7%～1.7%,相对标准偏差为1.1%～2.5%,实际样品加标回收率在97.0%～103%之间,回收率高,能够满足废水中低含量银的测定。     

Determination of sources of lead in tap water by inductively coupled plasma mass spectrometry (ICP-MS)

We measured the concentrations of Pb and its isotope ratios in coconmittantly obtained tap water and plumbing materials by inductively coupled mass spectrometry (ICP-MS). The Pb concentrations were determined by external calibration with²⁰⁹Bi as an internal standard. Isotope ratios were measured and mass discrimination corrected by normalization to NIST SRM-981 (common lead isotopic standard). Student/s t-test was used to compare the isotopic ratios of²⁰⁶Pb/²⁰⁷Pb,²⁰⁶Pb/²⁰⁸Pb, and²⁰⁷Pb/²⁰⁸Pb in the tap water with those in various plumbing materials. The comparisons revealed that the source of Pb in most of the tap water samples was derived from copper pipe or solder.