Investigation and characterization of PVA-g-AAc/Zol membranes for possible practical use in separation processes

Poly(vinyl alcohol) films were grafted with two monomers (acrylic acid and N-vinyl imidazole) using the gamma irradiation technique. The melting temperature (T_m) and glass transition temperature (T_g) of the grafted membranes were determined with respect to the grafting yield. The ability of these membranes to separate cobalt from nickel has been investigated. The diffusion of cobalt and nickel ions from the feed compartment to the receiver compartment depends on the grafting yield and the pH of the feed solution. Cobalt ions do not diffuse through the membrane when the pH of the feed solution is >4.5. Thus, the prepared membranes could be considered for the separation of cobalt ions from nickel ions. The temperature of thermal decomposition of pure PVA-g-AAc/Zol membrane, PVA-g-AAc/Zol membranes containing cobalt ions, and PVA-g-AAc/Zol membranes containing nickel ions are determined using TGA analyzer; it was shown that the presence of cobalt and nickel increases the decomposition temperature. Also the membranes bonded with cobalt ions are more stable than the membranes containing nickel ions.     

Influence of d-Electron Divalent Metal Ions in Complex Formation with L-Tartaric and L-Malic Acids

Binary complexes of α-hydroxy acids (L-Tartaric acid and L-Malic acid) with d-electron metal ions (copper, cobalt, nickel) were investigated. Potentiometric measurements have been performed in aqueous solution with computer analysis of the data for determination of the stability constants of complexes formed in the studied systems. The coordination mode of the complexes was defined using spectroscopic methods: electron paramagnetic resonance (EPR), ultraviolet-visible (UV-Vis), circular dichroism (CD), and infrared (IR). Results of the equilibrium studies have provided evidence for the formation of dimers with copper(II) ions and monomers with cobalt(II) and nickel(II) ions.     

Adhesive properties of rubbers with promoters based on modified silica filler

The influence of new adhesion promoters on the strength of bonding between unfilled rubber materials based on synthetic isoprene rubber SKI-3 and a brass-plated metal cord was studied. The synthesized adhesion promoters are silica fillers modified with cobalt, nickel, or a combination of cobalt and nickel, and they contain on their surface a lower number of ions of metals with variable valency compared to industrial cobalt stearate. It was shown that, among the synthesized adhesion promoters, silica fillers modified with cobalt are the most promising.     

Complexation of Terbium Ion with the Copolymer of Acrylic Acid and Acrylamide Grafted onto Polyethylene

Acrylic acid (AA) and acrylamide (AAm) were graft copolymerized onto polyethylene powder by the preirradiation method. The PE powder grafted with both AA and AAm (PE-g-(AA-co-AAm)) rapidly adsorbed Tb ion with an efficiency higher than did PE powder grafted with AA (PE-g-AA). The complex formation constant of Tb ion with PE-g-(AA-co-AAm) was larger than that with PE-g-AA because the introduction of the acrylamide part decreased the steric hindrance for complexation between Tb and the carboxyl group of the graft chains. Tb ion was efficiently separated from transition metal ions, such as Co, upon passage of a solution through a column packed with PE-g-(AA-co-AAm).     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Derivative spectrophotometric determination of nickel using Br-PADAP

A major problem with spectrophotometric methods for nickel is cobalt interference, because many of the reagents for nickel also react with cobalt. In this work, the interference of cobalt in the determination of nickel using 2-(5-bromo-2-pyridylaxo)-5-diethylaminophenol (Br-PADAP) was eliminated by the use of derivative spectrophotometry, using the zero-crossing method for evaluation of the derivative signal. Br-PADAP reacts with nickel(II) in the presence of Triton X-100 to form a red complex with absorption maxima at 530 and 562 nm. The reactions parameters and the conditions for the measurements of the first-derivative signal were studied and the results demonstrated that using the derivative technique, Br-PADAP can be used for nickel determination with a selectivity higher than that of ordinary spectrophotometry and with a limit of detection of 0.2 ng ml(-1). The pH should be in the range 5.0-6.0 using an acetate buffer. The determination of nickel in the presence of cobalt was performed with conventional and derivative procedures, and the results demonstrated that only the derivative method should be used and, of the methods used for evaluation of the derivative signal, the zero-crossing method is the best. The proposed procedure was used for nickel determination in steels standards. The results demonstrated that the procedure has satisfactory accuracy and precision. Cobalt interference can be also eliminated by using dual-wave-length spectroscopy.     

Hydrodemethoxylation/Dealkylation on Bifunctional Nanosized Zeolite Beta

Mono-, and bimetallic Ni-, Ru-, and Pt-modified nanosized Beta zeolite catalysts were prepared by the post synthesis method and characterized by powder X-ray diffraction (XRD), nitrogen physisorption, HRTEM microscopy, temperature-programmed reduction (TPR-TGA), ATR FT-IR spectroscopy, and by solid-state MAS-NMR spectroscopy. The presence of nanosized nickel-oxide, ruthenium-oxide, and platinum species was detected on the catalysts. The presence of Brønsted and Lewis acid sites, and incorporation of nickel ions into zeolite lattice was proven by FT-IR of adsorbed pyridine. The structural changes in the catalyst matrix were investigated by solid state NMR spectroscopy. The catalysts were used in a gas-phase hydrodemethoxylation and dealkylation of 2-methoxy-4-propylphenol as a lignin derivative molecule for phenol synthesis.     

Preparation of High-Performance Composite Hydrogel Reinforced by Hydrophilic Modified Waste Rubber Powder

In order to reduce the environmental pollution caused by waste rubber and to realize the recycling of resources, we proposed a facile method for the hydrophilic modification of waste rubber powder (HRP) and used it to reinforce a composite hydrogel. In the presence of toluene, dibenzoyl peroxide (BPO) diffused into the waste rubber powder. After the solvent was removed, BPO was adsorbed in the rubber powder, which was used to initiate the grafting polymerization of the acrylamide monomer on the rubber–water interface. As a result, the polyacrylamide (PAM) molecular chains were grafted onto the surface of the rubber powder to realize hydrophilic modification. The success of the grafting modification was confirmed by FTIR, contact angle testing, and thermogravimetric analysis. The hydrophilic modified waste rubber powder was used to reinforce the PAM hydrogel. Mechanical tests showed that the tensile strength and elongation at the break of the composite hydrogel reached 0.46 MPa and 1809%, respectively, which was much higher than those of pure PAM hydrogel. Such a phenomenon indicates that the waste rubber particles had a strengthening effect.     

Ion-exchange recovery of nickel(II) and cobalt(II) from sulfuric acid solutions

Sorption recovery of nickel(II) and cobalt(II) in their joint presence in sulfuric acid solutions was studied on new samples of domestic ion exchangers of CYBBER brand. It was shown that the ion exchangers under study have a high sorption capacity for ions of both nonferrous metals, depending on the structure of a sorbent and on the acidity of a contacting solution. It was found that, after Co(II) and Ni(II) ions are extracted from weak or strong sulfuric acid solutions, they can be effectively eluted from the ion exchangers under study with a 2 M hydrochloric acid solution to an extent of 85–95% (nickel) and 87–95% (cobalt).     

Synthesis of chitin derivatives and their metal complexes

Thiosemicarbazide, phosphoric acid and amidoxime derivatives of chitosan were synthesized and their ability for metal ion adsorptions was discussed. Thiosemicarbazide derivative, synthesized by treating chlorodeoxychitosan with ammonium thiocyanate followed by treatment with hydrazine, was considered to have cross-linked network structure. Phosphoric acid derivative containing both N-phosphonic acid and phosphoric acid groups was synthesized by cyanoethylation of chitosan using acrylonitrile, followed by treatment with hydroxylamine. These derivatives were found to adsorb effectively infinitesimal concentration (ppb order) of uranyl ion in seawater. Stability constants of some metal ion chitosan chelates were determined. To improve the selectivity in the adsorption of metal ions, a novel method utilizing metal ion as a template was adopted, and the results are discussed.     

Pulse-polarographic analysis of nucleic acids and proteins

Nucleic acids and proteins were studied by means of derivative and normal pulse polarography, and d.c. and a.c. polarography in connection with the dropping mercury electrode. It was shown that natural ribonucleic acids, as transfer, ribosomal and viral RNAs yield derivative pulse-polarographic peaks; from their heights and potentials conclusions can be made about their content of ordered structure in solution, similarly as in the case of deoxyribonucleic acids studied earlier. Synthetic single-stranded polyribo-cytidylic acid yields a well developed peak, whereas in the double-helical complex with polyriboguanylie acid it is inactive when using either derivative pulse polarography or d.c. polarography. Well developed peaks were obtained also with albumin (a protein containing reducible?S?S? groups), while only an inflex was observed on the d.c. polarogram. Proteins were also studied in media containing cobalt (Brdi?ka's solution) or nickel and it was shown that derivative pulse polarography due to its high sensitivity and accuracy enables us to carry out the measurements even in less common media than Brdi?ka's solution. This fact could be exploited in clinical chemistry as well as in the investigation of the nature of catalytic currents of proteins. The currents of double-helical polynucleotides obtained by means of normal pulse polarography exhibit a marked dependence on the initial potential and cannot represent a reliable indicator of structural changes of biopolymers in solution. They can however, be used in studies of the influence of the polynucleotide adsorption at different potentials on the subsequent reduction.     

漆原镍催化剂用于苯酚催化加氢

利用锌粉将NiCl₂液相还原制备漆原镍催化剂,考察了碱/酸活化方法、锌粉用量、还原温度、添加载体等条件下漆原镍催化苯酚加氢反应的性能。结果表明,锌粉还原的漆原镍催化剂可用NaOH或者乙酸活化处理,NaOH的效果优于乙酸。与不添加载体的催化剂相比,添加载体组分明显提高了金属镍的分散性和利用率。γ-Al₂O₃、CaCO₃、MgO均可作为漆原镍催化剂载体组分,而γ-Al₂O₃效果最好。还原剂锌粉用量、载体加入量过少或过多,都会造成催化剂活性降低,这与其影响金属镍的可接近性及分散性相关。无载体或加入载体的漆原镍催化剂均可在120~160 ℃催化苯酚加氢反应,主要产物为环己醇和环己酮,并以环己醇为主。     

笼形聚偕氨肟树脂的研究──Ag(Ⅰ)在树脂上的吸附过程

测定了Ag+离子在笼形聚偕胺肟树脂（CAO）及其酸、碱处理产物（ACAO、BCAO）上的吸附容量．Ag+离子在BCAO树脂上吸附容量较高,但同非选择性吸附,在ACAO上的吸附容量则与处理树脂的酸的pKa值有关．用高pKa值的硼酸、苯酸和对氨基酚处理所得的ACAO树脂的吸附容量接近BCAO树脂的水平,认为是胶后胺肟基发生互变异构所致．吸附动力学表明Ag+离子在H3BO3/ACAO和C6H5OH/ACAO树脂上进行多层吸附．在吸附中伴随有氧化还原反应并生成Ag（O）微晶的过程．     

Metal complex catalysts immobilized in polymer gels

A number of polymer gels have been prepared using tertiary ethylene‐propylene‐ethylidenenorbomene copolymer as a rubber base with grafted poly‐4‐vinylpyridine, polymethacrylic acid and polymethacrylamide ligand chains. The grafted copolymers were crosslinked and complexes of nickel, zirconium and titanium were immobilized in the formed crosslinked copolymers. After treatment with organoaluminium compounds the obtained catalysts demonstrate high catalytic activity in the reactions of dimerization of lower olefins. Structures of the complexes and the catalytic activity of the gel immobilized catalysts have been investigated.     

Determination of ultra trace amounts of cobalt and nickel in water samples by inductively coupled plasma-optical emission spectrometry after preconcentration on modified C18-silica extraction disks

A highly sensitive and accurate method for preconcentration and determination of ultra trace amounts of cobalt and nickel ions in water samples is proposed. The preconcentration is achieved using C₁₈-silica extraction disks modified with 5-(6-methoxy-2-benzothiazoleazo)-8-aminoquinoline (MBTAQ). The retained ions on the prepared solid phase was eluted with 10 ml of 0.01 M nitric acid and measured by inductively coupled plasma-optical emission spectrometry (ICP-OES). The influence of the type and amount of eluent used, pH, sample and eluent flow rates, amount of MBTAQ and the effect of other ions on extraction efficiency were investigated. The limits of detection of the method were 0.08 and 0.06 μg l^− 1 for cobalt and nickel, respectively, and provide an enrichment factor of 100. The results obtained on 10 successive extractions and elution cycles revealed relative standard deviations of 1.5 and 1.0% for cobalt and nickel, respectively. The proposed method has been applied to the determination of ultra trace amounts of cobalt and nickel ions in natural and synthetic water samples with satisfactory results.     

Determination of ultra trace amounts of cobalt and nickel in water samples by inductively coupled plasma-optical emission spectrometry after preconcentration on modified C18-silica extraction disks

A highly sensitive and accurate method for preconcentration and determination of ultra trace amounts of cobalt and nickel ions in water samples is proposed. The preconcentration is achieved using C₁₈-silica extraction disks modified with 5-(6-methoxy-2-benzothiazoleazo)-8-aminoquinoline (MBTAQ). The retained ions on the prepared solid phase was eluted with 10 ml of 0.01 M nitric acid and measured by inductively coupled plasma-optical emission spectrometry (ICP-OES). The influence of the type and amount of eluent used, pH, sample and eluent flow rates, amount of MBTAQ and the effect of other ions on extraction efficiency were investigated. The limits of detection of the method were 0.08 and 0.06 μg l^− 1 for cobalt and nickel, respectively, and provide an enrichment factor of 100. The results obtained on 10 successive extractions and elution cycles revealed relative standard deviations of 1.5 and 1.0% for cobalt and nickel, respectively. The proposed method has been applied to the determination of ultra trace amounts of cobalt and nickel ions in natural and synthetic water samples with satisfactory results.     

接枝型偕胺肟树脂/SiO_2功能复合微粒的制备

用偶联剂γ-(甲基丙烯酰氧)丙基三甲氧基硅烷(KH-570)对微米级硅胶进行了表面化学改性,采用溶液聚合法,在改性硅胶微粒表面接枝丙烯腈(AN),制备了接枝微粒PAN/SiO2。用盐酸羟胺对接枝PAN进行偕胺肟(AO)化转变,制得了接枝有偕胺肟树脂(PAO)的复合型功能微粒PAO/SiO2。采用红外光谱(FT-IR)、热失重(TGA)及扫描电子显微镜(SEM)等测试技术,对接枝微粒PAN/SiO2以及功能微粒PAO/SiO2进行了表征,考察了制备条件对AN的接枝聚合过程及对PAN的偕胺肟化转变过程的影响规律。结果表明,适宜的接枝聚合条件为:引发剂质量分数为1.5%,反应温度为75℃。接枝聚合5h可制得接枝度为0.14g/g的接枝微粒PAN/SiO2。受偕胺肟基团空间位阻的影响,PAN的偕胺肟化转变反应不能进行彻底,适宜的PAN/SiO2偕胺肟化转变反应条件为:介质pH值为6～7,温度70℃,反应时间4h。所制得的功能微粒PAO/SiO2腈基转化率约为78%。     

Photografting of polymers onto nanosized silica surface initiated by eosin moieties immobilized onto the surface

The photograft polymerization of various vinyl monomers onto nanosized silica surfaces was investigated. It was initiated by eosin moieties introduced onto the silica surface. The preparation of the silica with eosin moieties was achieved by the reaction of eosin with benzyl chloride groups on the silica surface.These were introduced by the reaction of surface silanol groups with 4‐(chloromethyl)phenyltrimethoxysilane in the presence of t‐butyl ammonium bromide as a phase‐transfer catalyst. The photopolymerization of various vinyl monomers, such as styrene, acrylamide, acrylic acid, and acrylonitrile was successfully initiated by eosin moieties on the silica surface in the presence of ascorbic acid as a reducing agent and by oxygen. The corresponding polymers were grafted from the silica surface. The grafting efficiency (percentage of grafted polymer to total polymer formed) in the photoinitiation system was much larger than that in the radical polymerization initiated by surface radicals; these radicals were formed by the thermal decomposition of azo groups introduced onto the silica surface. It was found that the polymer‐grafted silica gave stable dispersions in good solvents of grafted polymer and the wettability of the surfaces can be easily controlled by grafting of polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 600–606, 2005     

Separation and concentration of cobalt from ammoniacal solutions containing cobalt and nickel by emulsion liquid membranes using 5,7-dibromo-8-hydroxyquinoline (DBHQ)

The separation and concentration of cobalt from ammoniacal solutions containing nickel and cobalt by an emulsion liquid membranes (ELMs) using 5,7-dibromo-8-hydroxyquinoline as extractant has been presented. Membrane solution consists of a diluent (kerosene), a surfactant (Span 80), a modifier (tributylphosphate), and an extractant (DBHQ). Very dilute sulphuric solution containing EDTA as complexing agent, buffered at pH 5.0, has been used as a stripping solution. pH of ammoniacal feed solution containing cobalt and nickel was adjusted to 9.0 with hydrochloric acid. The important variables governing the permeation of cobalt have been studied. These variables are membrane composition, pH of the feed solution, cobalt and nickel concentrations of the feed solution, mixing speed, surfactant concentration, extractant concentration, EDTA concentration and pH of the stripping solution, and phase ratio. After the optimum conditions had been determined, it was possible to selectively extract 99.0% of cobalt from ammoniacal feed solution containing Co²⁺ and Ni²⁺ ions. The separation factors of cobalt with respect to nickel, based on initial feed concentration, have experimentally found to be of as high as 247.5 for about equimolar Co–Ni feed solutions.     

In situ metal particle preparation in cross-linked poly(2-acrylamido-2-methyl-1-propansulfonic acid) hydrogel networks

Anionic hydrogels of poly(2-acrylamido-2-methyl-1-propansulfonic acid) (p(AMPS)) were prepared with a different amount of cross-linker extent and used for in situ preparation of magnetic and metal particles. The metal particles with various sizes were obtained inside the three-dimensional polymer matrixes by absorption of the corresponding metal ions from their aqueous solutions followed by the reduction in the presence of strong reducing agent. In addition to iron particles, cobalt, nickel, copper nanoparticles, and CdS, quantum dot has been prepared by utilizing hydrogel matrix as a template for inorganic/organic composite synthesis. It was observed that the amount of cross-linkers (0.5%, 0.75%, and 1% with respect to monomer mole ratio) used in this study for bare p(AMPS) has not significantly influenced the morphology of the hydrogels or the size of the iron particles while having great effect on swelling of p(AMPS) hydrogels in water. Copolymeric hydrogels of AMPS with acrylamide in different composition were also prepared. Thermogravimetric analysis and transmission electron microscopy results showed that the AMPS content of the copolymeric hydrogel has great impact on both the metal ion loading capacity and the size of the resultant metal particles.