Reverse isotope dilution alpha spectrometry using plutionium-239 spike for determining plutonium concentration in high burn-up fuel samples without purification from americium-241 and a bulk of other impurities

A reverse isotope dilution alpha spectrometric /R-IDAS/ method using²³⁹Pu as a spike is described for the determination of plutonium concentration in high burn-up fuel samples wth²³⁸Pu/(²³⁹Pu+²⁴⁰Pu) alpha activity ratio >0.5, without resorting to any purification from²⁴¹Am and a bulk of other impurities. It involves the addition of a pre-clibrated spike solution to a known aliquot of the plutonium sample solution followed by source preparation using TEG as a spreading agent. The results obtained on a number of plutonium samples containing 20–80% of²⁴¹Am /alpha activity wise/ using this method are compared with those achieved by R-IDAS using purification with TTA, with respect to precision and accuracy. Precision and accuracy of 0.5% are demonstrated. This method eliminates the need of any separation and purification of plutonium from²⁴¹Am and a bulk of other impurities like uranium.     

A gamma-spectrometric method for the determination of plutonium isotope ratios

A gamma-spectrometric method using an intrinsic high resolution germanium detector has been developed for the determination of isotope ratios of plutonium from samples in solution form. The method is based on the assay of low energy gamma-rays of²³⁸Pu,²³⁹Pu,²⁴⁰Pu and²⁴¹Pu and does not require the use of branching intensities or the knowledge of detection efficiencies for different gamma rays. Since low energy gamma-rays are used, the effect of²⁴¹Am has also been studied. It is found that results are not affected up to 0.5 wt% of²⁴¹Am in plutonium samples. An accuracy of 3% is achievable in the determination of²⁴⁰Pu/²³⁹Pu and²⁴¹Pu/²³⁹Pu atom ratios as demonstrated by carrying out measurements on isotopic standards of plutonium.     

Behavior and distribution of <Superscript>239+240</Superscript>Pu and <Superscript>241</Superscript>Am in the east coast of Peninsular Malaysia marine environment

The present distributions of ^239+240Pu, ²⁴¹Am and activity ratio of ²⁴¹Am/^239+240Pu in surface seawater of the Peninsular Malaysia east coast were studied. The surface seawater samples were collected at 30 identified stations during the expedition conducted in 2008. ^239+240Pu activity concentrations in surface seawater of the studied area were in the range of 2.33 ± 0.20–7.95 ± 0.68 mBq/m³, meanwhile ²⁴¹Am activity concentrations ranged from MDA to 1.90 ± 0.23 mBq/m³. The calculated activity ratios of ²⁴¹Am/^239+240Pu were varied and disperse distributed with the ranged of 0.12–0.53. The relationships between anthropogenic radionuclide and oceanographic parameters such as turbidity and salinity were examined. The linearly relationships between ^239+240Pu and oceanographic parameters are important for better understanding of its transport processes and behavior in the east coast of Peninsular Malaysia marine environment. Thus, the differ of distribution of ^239+240Pu, ²⁴¹Am and ²⁴¹Am/^239+240Pu in the studied area mainly due to high affinity of ^239+240Pu to associate with sinking particles, mobility nature of ²⁴¹Am, degree of particle reactive of both anthropogenic radionuclides, scavenging and removal process; and others.     

Origin and release date assessment of environmental plutonium by isotopic composition

The origin and release date of environmental plutonium have been assessed by the measurement of plutonium and americium isotopic composition. The applicability and sensitivity of different plutonium isotope ratios, ²⁴⁰Pu/²³⁹Pu and ²⁴¹Pu/²³⁹Pu measured by inductively coupled plasma sector field mass spectrometry and ²³⁸Pu/²³⁹Pu analysed by alpha spectrometry, have been evaluated for origin determination in several types of environmental samples. With use of mixing models the contribution of different sources (e.g. global fallout or Chernobyl) can be calculated. By the measurement of the ²⁴¹Am/²⁴¹Pu isotope ratio, the release date (i.e. formation of ²⁴¹Pu by irradiation) can be estimated in environmental samples, which is an important parameter to distinguish recent plutonium release from previous (e.g. Chernobyl) emissions.     

Procedures to define Pu isotopic ratios characterizing a contaminated area in Palomares (Spain)

Plutonium isotopic ratios have been calculated in soils contaminated by the Palomares accident which occurred in 1966 (Almería, Southeastem Spain). Contrasted techniques have been used to determine the radionuclide activities:²³⁸Pu and^238+240Pu were analysed by -spectrometry prior purification on anion-exchange resins, the ratio²³⁹Pu/²⁴⁰Pu was estimated by -spectra deconvolution and²⁴¹Pu was directly measured by liquid scintillation counting and indirectly through quantification of in-grown²⁴¹Am from aged plutonium discs. The mean activity ratios²³⁸Pu/²³⁹Pu,²³⁹Pu/²⁴⁰Pu,²⁴¹Pu/²³⁹Pu, backdated to 1966, were 0.027±0.002 (1), 4.5±0.2 (1) and 8.2±0.8 (1), respectively, characterizing the accident of Palomares as the source term of the measured plutonium.     

ICP-MS analysis of plutonium activities and <Superscript>240</Superscript>Pu/<Superscript>239</Superscript>Pu ratio in alpha spectrometry planchet deposits

Plutonium isotopes were measured by alpha-spectrometry and ICP-MS in sediment samples from two European lakes: Blelham Tarn in U.K. and Stechlin lake in Germany. The ICP-MS measurements were made after alpha-spectrometry counting of the planchets. The planchets were prepared by traditional electrodeposition method after radiochemical extraction, separation and purification of the Pu fraction. A short radiochemical separation using plutonium selective resin, between the two spectrometry measures, is presented. The results show that these two complementary methods are in good agreement, the plutonium activity concentrations are the same. Alpha-spectrometry allows the ²³⁸Pu determination and ICP-MS individual measurement of ²³⁹Pu and ²⁴⁰Pu. ²³⁸Pu/^239+240Pu and ²⁴⁰Pu/²³⁹Pu ratios are calculated to determine the plutonium contamination source. With the results of these two techniques, it could be demonstrate that the plutonium is of global fallout origin.     

137Cs, 40K, 90Sr, 238, 239+240Pu, 241Am and 243+244Cm in forest litter and their transfer to some species of insects and plants in boreal forests: Three case studies

Results for ¹³⁷Cs, ⁴⁰K, ⁹⁰Sr, ^238,239+240Pu, ²⁴¹Am and ^243+244Cm measurements in plant, insects and forest litter samples collected at three sites in Poland are presented. New results are compared with some existing data for locations examined during previous studies. Insect samples were introduced now for the first time. Relatively high activities of ⁹⁰Sr were noticed for spruce bark beetle (Ips typographus) and those for ¹³⁷Cs, plutonium and ²⁴¹Am for forest dung beetle (Anoplotrupes stercorosus). Faster than caused by physical decay decrease of radiocesium activity was noticed for the majority of plant and litter samples. The results for ^239+240Pu for litter were similar to previous results, but the activities of ²³⁸Pu were smaller. The activity ratio between ²⁴¹Am and ^239+240Pu was found lower than expected for known proportions between global and Chernobyl fallout. Thus a kind of dynamic behavior of Pu and Am in the forest ecosystem is concluded. Transfer factors and aggregation coefficients were estimated and discussed for both plants and insects as well as between insects and the part of plants (or litter) they feed on. Many of them were never presented before.The authors are thankful to the Polish State Committee for Scientific Research for financial support of this investigation, Grant No. PG04 07520.     

137Cs, 40K, 90Sr, 238, 239+240Pu, 241Am and 243+244Cm in forest litter and their transfer to some species of insects and plants in boreal forests: Three case studies

Results for ¹³⁷Cs, ⁴⁰K, ⁹⁰Sr, ^238,239+240Pu, ²⁴¹Am and ^243+244Cm measurements in plant, insects and forest litter samples collected at three sites in Poland are presented. New results are compared with some existing data for locations examined during previous studies. Insect samples were introduced now for the first time. Relatively high activities of ⁹⁰Sr were noticed for spruce bark beetle (Ips typographus) and those for ¹³⁷Cs, plutonium and ²⁴¹Am for forest dung beetle (Anoplotrupes stercorosus). Faster than caused by physical decay decrease of radiocesium activity was noticed for the majority of plant and litter samples. The results for ^239+240Pu for litter were similar to previous results, but the activities of ²³⁸Pu were smaller. The activity ratio between ²⁴¹Am and ^239+240Pu was found lower than expected for known proportions between global and Chernobyl fallout. Thus a kind of dynamic behavior of Pu and Am in the forest ecosystem is concluded. Transfer factors and aggregation coefficients were estimated and discussed for both plants and insects as well as between insects and the part of plants (or litter) they feed on. Many of them were never presented before.The authors are thankful to the Polish State Committee for Scientific Research for financial support of this investigation, Grant No. PG04 07520.     

Plutonium in lungs and livers of persons from Chernobyl fallout affected areas in Byelorussia

^239+240Pu and-when possible-also the ratio²³⁸Pu/^239+240Pu was determined in the lungs and livers of 15 residents from Chernobyl-fallout contaminated areas in Byelorussia. In several cases various sections of the lungs were analyzed separately. With the exception of one person the activity concentrations of^239+240Pu, were always within the range expected from the global fallout of weapon tests in the sixties and did not indicate any contribution of Chernobyl-derived plutonium.     

Isotopic analysis of plutonium using a combination of alpha and internal conversion electron spectroscopy

A combination alpha and conversion electron spectrometer was developed to quantify ²³⁹Pu/²⁴⁰Pu and ²³⁸Pu/²⁴¹Am isotopic ratios of plated sources. The spectrometer was constructed with a commercially available low noise passivated ion-implanted planar silicon (PIPS) detector that was cooled to 77 K with liquid nitrogen. The combination spectrometer was used to quantify alpha-particles, conversion electrons, gamma-rays and X-rays associated with the decay of various plutonium isotopes and ²⁴¹Am. Two amplifiers operated in parallel with different gains allowed for simultaneous acquisition of the lower energy region (21-60 keV) for internal conversion electrons, gamma-rays and X-rays, and the higher energy region (5050 keV-5550 keV) for alpha-particles. Energy resolutions of 2.2 keV FWHM (full-width at half maximum) for the 38.7 keV M conversion electrons and 11.2 keV for the 5499.2 keV alpha-particles from ²³⁸Pu were measured. The energy resolution combined with a spectral deconvolution method was sufficient to be able to quantify the radioactivity using the alpha-spectra as well as the electron spectra; however, quantification of the radioactivity using the internal conversion electron spectra was more problematic because of the presence of X-rays, gamma-rays, Compton scatter electrons and the number of electron peaks present. Deconvolution of the alpha-spectra yielded ²³⁹Pu and ²⁴⁰Pu activities (as % of total Pu activity), which differed from expected values by -3.0% to 5.4%. Deconvolution of an internal conversion electron spectrum of a high ²³⁹Pu and low ²⁴¹Am activity sample yielded ²³⁹Pu and ²⁴⁰Pu activities, which differed by -17.1 and -35.5% relative to the alpha-measurements, respectively. Determination of the Pu activity using the electron spectra was more problematic in samples where the ²⁴¹Am activity dominated. Determination of ²³⁸Pu and ²⁴¹Am activity by the electron spectroscopy data was also obtained and compared with the alpha-spectroscopy results. Theoretical investigation of the removal of ²⁴¹Am or use of a 400 eV electron spectrometer indicated that the internal conversion electron spectra could be used to determine the ²³⁸Pu, ²³⁹Pu, ²⁴⁰Pu/²⁴¹Am (when present) activity with and without spectral deconvolution, respectively.     

Age determination of plutonium using inductively coupled plasma mass spectrometry

The age of plutonium is defined as the time since the last separation of the plutonium isotopes from their daughter nuclides. In this paper, a method for age determination based on analysis of ²⁴¹Pu/²⁴¹Am and ²⁴⁰Pu/²³⁶Pu using ICP-SFMS is described. Separation of Pu and Am was performed using a solid phase extraction procedure including UTEVA, TEVA, TRU and Ln-resins. The procedure provided separation factors adequate for this purpose. Age determinations were performed on two plutonium reference solutions from the Institute for Reference Materials and Measurements, IRMM081 (²³⁹Pu) and IRMM083 (²⁴⁰Pu), on sediment from the Marshall Islands (reference material IAEA367) and on soil from the Trinity test site (Trinitite). The measured ages based on the ²⁴¹Am/²⁴¹Pu ratio corresponded well with the time since the last parent-daughter separations of all the materials. The ages derived from the ²³⁶U/²⁴⁰Pu ratio were in agreement for the IRMM materials, but for IAEA367 the determination of ²³⁶U was interfered by tailing from ²³⁸U, and for Trinitite the determined age was biased due to formation of ²³⁶U in the detonation of the “Gadget”.     

Simultaneous determination of plutonium and americium in soils by extraction chromatography

A radiochemical method is described for the determination of²³⁸Pu,^239(240)Pu and²⁴¹Am in a single soil sample. Plutonium is separated from a HNO₃ leaching solution by a Microthene-TNOA column; amcricium is coprecipitated by oxalic acid, decontaminated from polonium by a TNOA-column in HCl medium, separated from the rare earth elements by a Microthene-HDEHP column, eluted with a 0.07M DTPA+1M lactic acid solution and finally purified by a PMBP-TOPO extraction. The method supplies a good decontamination of Am and Pu from natural alpha emitters; starting from 50 g soil, the average yields were 75.1±13.4% for plutonium and 57.7±10.8% for Am.^239(240)Pu,²³⁸Pu and²⁴¹Am concentrations (mBq/kg) in three different kinds of soil were the following: 255, 10.4, 81.3 (uncultivated soils); 236, 11.6, 76.7 (cultivated soils); 46, 1.9, 19.8 (river sediment). The average ratios²³⁸Pu to^239(240)Pu and²⁴¹Am to^239(240)Pu were 0.044 and 0.350, respectively.     

A combined method for the determination of the isotopic vector of plutonium isotopes in environmental samples

A combination of alpha-spectrometry, liquid scintillation counting (LSC) and accelerator mass spectrometry (AMS) was used for the determination of plutonium isotopes. ²³⁸Pu and ^239+240Pu were measured by alpha-spectrometry after separation of Pu by anion-exchange using ²³⁶Pu tracer as recovery monitor. After alpha-measurement, one part of the sample was dissolved for determining ²⁴¹Pu by LSC. Another part was used for the measurement of the ²⁴⁰Pu/²³⁹Pu atom ratio by AMS at VERA. Thus, it was possible to obtain complete information on the Pu isotopic composition of the samples. This method was applied to environmental reference samples and samples contaminated from nuclear reprocessing.     

Geographical distribution of plutonium derived from the atomic bomb in the eastern area of Nagasaki

In order to know the distribution of plutonium derived from the Nagasaki atomic bomb, soil samples were measured to determine the ²⁴⁰Pu/²³⁹Pu isotope ratio of and concentrations of ^239+240Pu and ¹³⁷Cs. The ^239+240Pu concentrations in soils, except for Nishiyama area, were close to the average concentration of soil collected in Japan. In soils collected at the Nishiyama area and at the eastern area of Nagasaki Prefecture and at part of northern area in Kumamoto Prefecture, the ²⁴⁰Pu/²³⁹Pu ratios were lower than the global fallout values. This suggests that plutonium from the atomic bomb was deposited in the eastern area from the hypocenter reaching up to 100 km eastwards.     

Application of autoradiographic methods for contaminant distribution studies in soils

In order to determine physical location of contaminants in soil, solidified soil "thin" sections, which preserve the undisturbed structural characteristics of the original soil, containing weapons-grade plutonium from Rocky Flats Environmental Test (RFETS), were prepared. Two autoradiographic methods were used in radionuclide mapping, contact autoradiography using CR-39® plastic alpha-track detectors and neutron-induced autoradiography that produced fission fragment tracks in Lexan® plastic detectors. The combination of the two autoradiographic methods allowed to distinguish alpha-emitting particles of natural U, ^239+240Pu and non-fissile alpha-emitters. ocations of 990 alpha "stars" caused by ^239+240Pu and ²⁴¹Am "hot particles" were recorded, particles were sized, their size-frequency and depth distributions were analyzed. Several large colloidal conglomerates of ^239+240Pu and ²⁴¹Am "hot particles" were found in soil profiles.     

The isotopic composition of plutonium in the National Institute of Standards and Technology Standard Reference Material 4351, human lung

The Standard Reference Material 4351 from the National Institute of Standards and Technology is acknowledged to be inhomogeneous. The value of a single analysis for²³⁹Pu+²⁴⁰Pu could lie within a wide range, but the accuracy of the analysis can be corroborated by comparing the corresponding²³⁸Pu/²³⁹Pu+²⁴⁰Pu or²⁴⁰Pu/239Pu values with the relationships between these ratios and the total plutonium concentration.     

Multi-isotopic determination of plutonium (239Pu, 240Pu, 241Pu and 242Pu) in marine sediments using sector-field inductively coupled plasma mass spectrometry

Among the transuranic elements present in the environment, plutonium isotopes are mainly attached to particles, and therefore they present a great interest for the study and modelling of particle transport in the marine environment. Except in the close vicinity of industrial sources, plutonium concentration in marine sediments is very low (from 10⁻⁴ ng kg⁻¹ for ²⁴¹Pu to 10 ng kg⁻¹ for ²³⁹Pu), and therefore the measurement of ²³⁸Pu, ²³⁹Pu, ²⁴⁰Pu, ²⁴¹Pu and ²⁴²Pu in sediments at such concentration level requires the use of very sensitive techniques. Moreover, sediment matrix contains huge amounts of mineral species, uranium and organic substances that must be removed before the determination of plutonium isotopes. Hence, an efficient sample preparation step is necessary prior to analysis. Within this work, a chemical procedure for the extraction, purification and pre-concentration of plutonium from marine sediments prior to sector-field inductively coupled plasma mass spectrometry (SF-ICP-MS) analysis has been optimized. The analytical method developed yields a pre-concentrated solution of plutonium from which ²³⁸U and ²⁴¹Am have been removed, and which is suitable for the direct and simultaneous measurement of ²³⁹Pu, ²⁴⁰Pu, ²⁴¹Pu and ²⁴²Pu by SF-ICP-MS.     

Estimation of isotopic composition of plutonium from thermal reactors by neutron coincidence counting through isotopic correlation technique

Correlations have been established between %Eff ²⁴⁰Pu and various plutonium isotopes formed in thermal reactors. Based on these correlations, a method has been developed for the estimation of isotopic composition of plutonium obtained from thermal reactors. The method is simple, fast, non-destructive and finds application for the verification of plutonium isotopic composition in the finished products of known plutonium content. The method could be applied in the nuclear fuel fabrication to verify and confirm the fissile content (²³⁹Pu+²⁴¹Pu) specification. It has also been shown that in principle, similar correlations could be established for Pu obtained from different thermal reactor fuels with reactor specific fitting parameters.     

241Pu concentration in southern Baltic Sea ecosystem

Summary ²⁴¹Pu concentrations were calculated indirectly in different compartments of the southern Baltic ecosystem by the activity measurements of²⁴¹Am isotope from the increase of the<span lang=EN-GB style='font-size:12.0pt;font-family:Symbol;mso-bidi-font-family:Symbol; mso-ansi-language:EN-GB'>b-emitting²⁴¹Pu at 16-18 years after the Chernobyl accident. Enhanced levels of²⁴¹Pu were observed in all analyzed samples. Maximum values (0.408 and 0.367 mBq^. g^-1d.w.) of the estimated²⁴¹Pu concentrations were found in sediments of Internal Puck Bay and Gdańsk Bay, respectively, and in the suspended matter from water of Gdańsk Bay (77.8 mBq^.g^-1d.w.). The highest²⁴¹Pu/^239+240Pu activity ratio was found in the suspended matter (1500) and water (140). The²⁴¹Pu activity of the air dust was very high in April 1986, 3643±34.3 mBq^.g^-1d.w., and the²⁴¹Pu/^239+240Pu activity ratio was 56, but the highest²⁴¹Pu/^239+240Pu activity ratio of the air dust was measured in August. Then the²⁴¹Pu concentration in air dust decreased quickly to values similar to those before the Chernobyl accident.<span style='font-size:12.0pt'>This study provides new data for the ²⁴¹Pu concentrations in various compartments of the Baltic Sea ecosystem.     

Determination of Pu isotopes in sediment cores in the Sea of Okhotsk and the NW Pacific by sector field ICP-MS

Summary Studies on the environmental behavior of plutonium in the marine environment require an analytical method with high sensitivity and capability to provide the isotopic composition of Pu in marine samples. In this work, as part of our on-going project on Pu environmental behavior in the Pacific Ocean, a sector field ICP-MS method combined with an off-line anion-exchange chromatography system was optimized for the determination of Pu and its atomic ratio of ²⁴⁰Pu/²³⁹Pu in sediment core samples. Using a conical concentric nebulizer and 150-second counting time, we were able to lower the detection limit of Pu down to 0.35 fg. The mass discrimination effect was evaluated using a mixed Pu isotope standard solution with certified a ²⁴⁰Pu/²³⁹Pu isotope ratio (NBS-947). The overall performance of the analytical method was validated by the determination of Pu and its isotope composition in an ocean sediment reference material (IAEA-368). Both the ^239+240Pu activity and ²⁴⁰Pu/²³⁹Pu atomic ratio were found to be in good agreement with the certified and/or literature values. As an important application, we employed the analytical method to investigate the vertical profiles of ^239+240Pu activity and ²⁴⁰Pu/²³⁹Pu atomic ratio in sediment cores in the Sea of Okhotsk and the NW Pacific. It was found that the Bikini close-in fallout Pu could be transported as far as the Sea of Okhotsk. The results provided evidence to support our hypothesis on the oceanic current transportation of Bikini close-in fallout Pu in the NW Pacific and its marginal seas.