KF/Al_2O_3催化下4-芳基-9,10-二氢萘并[2,1-b]-4H-吡喃衍生物的合成

在KF/Al2O3催化下,α,β-不饱和腈或α,β-不饱和羧酸酯和7-甲氧基-1,2,3,4-四氢-2-萘酮反应,生成了一系列4-芳基-9,10-二氢萘并[2,1-b]-4H-吡喃衍生物.产物的结构通过红外光谱和核磁共振氢谱进行表征,并通过X单晶衍射分析进一步证实产物的结构.     

金属卟啉与过渡金属盐分步催化四氢萘合成α-四氢萘酮及反应机理

对以四氢萘为原料制备α-四氢萘酮的工艺进行了研究. 反应分两步进行: 首先以金属卟啉为催化剂催化空气氧化四氢萘,得到主要成分为α-四氢萘过氧化氢和α-四氢萘酮的氧化产物;然后以过渡金属盐为催化剂,将氧化产物中的α-四氢萘过氧化氢定向分解为α-四氢萘酮. 结果表明,四氢萘的金属卟啉催化氧化产物主要是α-四氢萘过氧化氢和α-四氢萘酮,仅得到微量的α-四氢萘醇. 含过渡金属CuⅠ和FeⅡ离子的盐类可以高选择性地将四氢萘氧化产物中α-四氢萘过氧化氢定向转化为α-四氢萘酮, FeⅡ离子的活性最高. 详细考察了不同金属卟啉及其浓度、温度对催化氧化四氢萘的影响;考察了不同金属离子及其浓度、温度对分解过程的影响. 对金属卟啉的催化氧化机理及过渡金属离子分解α-四氢萘过氧化氢机理进行了探讨.     

4-羟基-5，8-二甲氧基-萘-2-甲醛的合成

以2,5-二甲氧基苯甲醛为起始原料合成出了软毛柿木中分离到的天然产物4-羟基-5,8-二甲氧基-萘-2-甲醛,原料经过Stobbe缩合,环化,还原,氧化四步生成产物,并对醇选择性氧化成醛的过程进行了详细的研究．整个合成总的产率为32．2％．     

无溶剂条件下合成2-[3-氧代-1,3-二(未)取代苯基丙基]-1,2,3,4-四氢萘-1-酮

以3,4-二氢-1-萘酮和查尔酮为原料,在K2CO3-NaOH存在下,无溶剂室温研磨反应,方便地得到2-[3-氧代-1,3-二(未)取代苯基丙基]-1,2,3,4-四氢萘-1-酮.该方法具有反应条件温和、操作简单和产率较高等优点,并通过IR,1HNMR,元素分析确定了产物的结构,3b晶体结构通过X衍射测定.     

3-对甲氧基苯基-和3-对羟基苯基-1-氨基-3a,4,5,9b-四氢化-9b-羟基-3H-环戊烯并[a]萘-2-甲腈的合成和晶体结构

用低价钛试剂(TiCl₄-Zn)与2-氰基-3-对甲氧基苯基-3-(1-四氢萘酮-2-基)丙腈反应合成了3-对甲氧基苯基-1-氨 基-3a,4,5,9b-四氢化-9b-羟基-3H-环戊烯并[a]萘-2-甲腈和3-对羟基苯基-1-氨基-3a,4,5,9b-四氢化-9b-羟基-3H-环戊烯并[a]萘-2-甲腈, 并用X射线衍射分析确定了这两个产物的结构.     

氯化铜对6-甲氧基-2-酰基萘选择性氯化反应

甲氧基酰基萘;甲氧基萘;氯化铜对6-甲氧基-2-酰基萘选择性氯化反应     

KF/Al2O3催化下4-芳基-9,10-二氢萘并[2,1-b]-4H-吡喃衍生物的合成

在KF/Al₂O₃催化下, α,β-不饱和腈或α,β-不饱和羧酸酯和7-甲氧基-1,2,3,4-四氢-2-萘酮反应, 生成了一系列4-芳基-9,10-二氢萘并[2,1-b]-4H-吡喃衍生物. 产物的结构通过红外光谱和核磁共振氢谱进行表征, 并通过X单晶衍射分析进一步证实产物的结构.     

溴化铜对6-甲氧基-2-酰基萘的选择性溴化反应

甲氧基酰基萘;甲氧基溴酰基萘;溴化铜对6-甲氧基-2-酰基萘的选择性溴化反应     

无溶剂条件下合成2-[3-氧代-1,3-二(未)取代苯基丙基]-1,2,3,4-四氢萘-1-酮

以3,4-二氢-1-萘酮和查尔酮为原料, 在 K₂CO₃-NaOH 存在下, 无溶剂室温研磨反应, 方便地得到2-[3-氧代-1,3-二(未)取代苯基丙基]-1,2,3,4-四氢萘-1-酮. 该方法具有反应条件温和、操作简单和产率较高等优点, 并通过IR, ¹H NMR, 元素分析确定了产物的结构, 3b晶体结构通过X衍射测定.     

2-乙酰基-6-甲氧基萘的多相催化氢化

乙酰基溴甲基萘;甲氧基萘基;2-乙酰基-6-甲氧基萘的多相催化氢化     

A Facile Synthesis of Ethyl 2,4-Dimethoxy-6-perfluoroalkyl-benzoates via Acyclic Precursors

Introduction Polysubstituted arenes are important intermediates in synthetic medicines and dyestuffs, and the fluorinated analogues are more attractive as a result of their lipo-philicity and the increment of activity.1,2 Therefore, to study the convenient and efficient synthesis of polysub-stituted arenes is valuable in organic synthetic method-ology. We have designed a simple synthesis of fluori-nated polysubstituted arenes through the intramolecular Wittig reaction of a new phosphorous ylid…     

Studies on Functionally-substituted Azines. 8. Synthesis and Transformations of 1-Arylsulfonylamido-4-methoxy-6-methylpyrimidines

The action of arylsulfonyl chlorides on 2-amino-4-methoxy-6-methylpyrimidine in pyridine gave 2-arylsulfonylamido-4-methoxy-6-methylpyrimidines, which were alkylated at the amide fragment, while the action of hydrazine hydrate led to nucleophilic replacement of the methoxy group. The resultant hydrazinopyrimidines were converted into azidopyrimidines and N-pyrimidinyldithiocarbazinates. Potassium salt of 2-p-toluenesulfonylamido-4-methoxy-6-methylpyrimidine dithiocarbazinate reacted with dimethyl sulfate to give the S-methyl derivative, while the reaction with chloroacetonitrile gave thiazolidinylaminopyrimidine. The chlorination using N-chlorosuccinimide yielded only 5-chloropyrimidines.     

One-pot synthesis of 2-trifluoromethylchromones

We report a simple and suitable method for the preparation of useful 2-trifluoromethylchromones in one step, in high yields and avoiding the use of solvents. We were able to detect the intermediate of this reaction. Furthermore a mechanism for the formation of the 7-methoxy-3-trifluoroacetyl-2-trifluoromethylchromone through the unexpected double trifluoroacetylation of 4-methoxy-2-hydroxyacetophenone followed by dehydration is also proposed. All compounds are fully identified and characterized by spectroscopic techniques.     

Alkyl Esters of 2-[5-Chloro(bromo)-6-methoxy-4-methylpyrimidinyl-2-oxy]alkanoic Acids

The reaction of a mixture of formaldehyde and sodium cyanide or of lactic acid nitrile with trimethyl(6-methoxy-4-methylpyrimidinyl-2)ammonium chloride give the 2-(6-methoxy-4-methylpyrimidinyl-2-oxy)alkanoic acid nitriles. They were subsequently converted to the corresponding alkyl esters by a Pinner reaction and then to their 2-(5-halo-6-methoxy-4-methylpyrimidinyl-2-oxy) derivatives using N-halosuccinimides.     

新型含哌嗪-磺酰胺的2(5H)-呋喃酮类化合物的合成及其抗癌活性

以糠醛为原料,经氧化、醚化和重结晶制得5-甲氧基-3,4-二溴-2(5H)-呋喃酮（4）; 4与哌嗪经Michael加成消除反应制得5-甲氧基-4-哌嗪基-3-溴-2(5H)-呋喃酮（5）; 5与取代磺酰氯经磺酰化反应合成了7 个新型的含哌嗪-磺酰胺的2(5H)-呋喃酮类化合物(7a~7g),其结构经¹H NMR, ¹³C NMR, IR和HR-MS表征。初步的生物活性研究(MTT法)表明,7a~7g均能显著抑制人宫颈癌Hela细胞的增殖,其中5-甲氧基-4-(对乙酰氨基苯磺酰基-哌嗪基)-3-溴-2(5H)-呋喃酮（7f）的抑制活性最佳,其IC₅₀为0.03 μM(24 h)。     

2-取代吲哚的染料敏化光氧化反应

2-苯基吲哚 (1a) 在甲醇中的染料敏化光氧化反应给出2-苯基-2-(2'-苯基-3'-吲哚基)二氢吲哚-3-酮 (2a) 和2-甲氧基-2-苯基二氢吲哚-3-酮 (4a), 相应N-甲基取代产物由1-甲基-2-苯基吲哚 (1b) 的类似反应获得。发现反应产物分布随吲哚 (1) 的浓度和介质酸度的变化而变化。对反应机理进行了推测, 其中当1a的反应在乙腈中进行时, 分离到了相应的反应中间体: 2-苯基-3H-吲哚-3-酮 (3a)。     

新型苯并二氢呋喃合二酮酸类化合物的合成及其与整合酶分子对接研究

以阿魏酸甲酯为原料,通过氧化偶联构建2-芳基苯并二氢呋喃骨架,再经傅克酰基化和酯缩合反应依次制得(E)-3-［2-(4-羟基-3-甲氧基-5-乙酰基)苯基-3-甲氧羰基-7-甲氧基-2,3-二氢苯［b］并呋喃-5-基］丙烯酸甲酯（3）和(E)-3-［2-(4-羟基-3-甲氧基-5-甲氧羰基乙酰基)苯基-3-甲氧羰基-7-甲氧基-2,3二氢苯并［b］呋喃-5-基］丙烯酸甲酯（4）; 4经水解反应合成3-【2-羟基-3-甲氧基-5-｛5-［2-（甲氧基羰基）乙烯基］-7-甲氧基-3-甲氧羰基-2,3-二氢苯并［b］呋喃-2-｝基】苯基-3-氧丙酸（5）,化合物3~5未见文献报道,其结构经¹H NMR, ¹³C NMR和MS(ESI)表征。采用分子对接软件Autodock vina对化合物2~5与HIV-1整合酶核心部位高度同源的PFV IN（PDB: 3L2V）进行对接,计算结果显示该类化合物能与整合酶形成稳定的复合物,具有1,3-二酮基团的化合物3, 4和5能与整合酶中金属离子产生螯合作用,其中化合物5的结合作用最强。     

Sur l'orientation et les anomalies de l'acetylation des Bz-méthoxy nitro-2 benzofurannes

4-Methoxy-, 5-methoxy- and 7-methoxy-2-nitrobenzofurans have been acetylated via the Friedel-Crafts reaction under the same reaction conditions. 2-Nitrobenzofuran does not undergo acetylation while 6-methoxy-2-nitrobenzofuran only produces decomposition products. As a result of the positive acetylation reactions, 7-acetyl-4-methoxy-, 4-acetyl-5-methoxy- and 4-acetyl-7-methoxy-2-nitrobenzofuran have been prepared. As side products in the acetylation reactions, 4-methoxy-3-(4′-methoxy-2′-nitro-7′-benzofuranyl)-2,3-dihydrobenzofuran-2-one was isolated when 4-methoxy-2-nitrobenzofuran was the starting material and, likewise, when 5-methoxy-2-nitrobenzofuran was the starting material, 3-chloro-5-methoxy-2,3-dihydrobenzofuran-2-one was obtained. Furthermore, 5-methoxy-2-nitrobenzofuran participated in an unexpected chlorination leading to 4-chloro-5-methoxy-2-nitrobenzofuran.     

Reaction of Dimethyl Acetylenedicarboxylate With 2-Mercaptoperimidine and 2-Mercaptobenzimidazole

A mixture of equimolar quantities of dimethyl acetylenedicarboxylate ( 2 ) with either 2-mercaptoperimidine ( 1 ) or 2-mercaptobenzimidazole ( 5 ) was heated in absolute benzene in the presence of triphenylphosphine as a catalyst under reflux conditions for 1 h (the reaction was monitored by TLC until the consumption of the starting materials). The solvent was concentrated under vacuum and the residue was subjected to chromatographic plates using toluene-ethylacetate (2:1) as an eluent. The products in each reaction were separated as two migrating zones. Each zone was removed from the plate and recrystallized from the appropriate solvent. The products of the first reaction are 10-methoxy-11-oxo-11H-8-thia-7,11a-diaza-benzo[de]anthracene-9-carboxylic acid methyl ester ( 3 ) and 8-thia-7,10a-diaza-cyclopenta[a]phenalene-9,10-dicarboxylic acid dimethyl ester ( 4 ), while the products of the second reaction are 3-methoxy-4-oxo-4H-1-thia-4a,9-diaza-fluorene-2-carboxylic acid methyl ester ( 10 ) and benzo[4, 5]imidazo[2,1-b]thiazole-2,3-dicarboxylic acid dimethyl ester ( 11 ). The mechanisms of the observed reactions are suggested.     

Ring-closing metathesis for the synthesis of substituted indenols,indenones, indanones and indenes: Tandem RCM-dehydrogenative oxidation and RCM-formal redox isomerization

A number of substituted indenols have been synthesized using ruthenium-mediated ring-closing metathesis (RCM) with Grubbs second generation catalyst as the key step. The required dienes were synthesized by two strategies. The first entailed the isomerization of 2-allyl-3-isopropoxy-4-methoxybenzaldehyde to its styrene derivative, isopropoxy-4-methoxy-2-propenylbenzaldehyde using [RuClH(CO)(PPh₃)₃]. This compound and 3-isopropoxy-4-methoxy-2-(1-phenyl-propenyl)-benzaldehyde were then treated with vinyl- or isopropenyl-magnesium bromide to afford four of the scaffolds required for the metathesis. As the compound 3-isopropoxy-4-methoxy-2-(1-methyl-2-propenyl)benzaldehyde proved to be difficult to isomerize, the diene substrates 1-[3-isopropoxy-4-methoxy-2-(1-methylpropenyl)-phenyl]-prop-2-en-1-ol and 1-[3-isopropoxy-4-methoxy-2-(1-methylpropenyl)-phenyl]-2-methylprop-2-en-1-ol were synthesized by the addition of the Grignard reagents to 3-isopropoxy-4-methoxy-2-(1-methyl-2-propenyl)benzaldehyde, followed by isomerization of the arylallyl group to the thermodynamically favoured isomer with potassium t-butoxide. The use of harsher conditions (higher temperature and catalyst loadings) for the metathesis reactions resulted in the formation of substituted indenones, formed by a tandem RCM-dehydrogenative oxidation in the absence of a hydrogen acceptor. Further manipulations of the reaction conditions generated two substituted indanones by way of a tandem RCM-formal redox isomerization sequence. Finally the synthesis of some substituted indenes was accomplished from their corresponding dienes by the use of RCM.