A novel method to obtain electronic speckle pattern interferometry fringe patterns with high contrast

Traditional speckle fringe patterns of electronic speckle pattern interferometry （ESPI） are obtained by adding, subtracting, or multiplying the speckle patterns recorded before and after the deformation. However, these speckle fringe patterns are of limited visibility, especially for addition and multiplication fringe patterns. We propose a novel method to obtain speckle fringe patterns of ESPI from undeformed and deformed speckle patterns. The fringe pattern generated by our method is of high contrast and has better quality than subtraction fringe. The new method is simple and does not require more computational effort. The proposed method is tested on the experimentally obtained undeformed and deformed speckle patterns. The experimental results illustrate the performance of this approach.     

Center positioning of circular interference fringe patterns for fine measurement

A kind of center positioning method of the circular interference fringe patterns was reported in this paper. The whole process was programmed by Matlab for processing the gray-scale images without denoising preprocessing and binary format transformation. The gradient vector field (GVF) based on a complex-valued cost function was used to extract the skeletons of circular interference fringe patterns, and the coordinate of the center was calculated by statistical method in which partial skeletons were selected to calculate the center according to the space topological relationship. Finally, subpixel accuracy and perfect anti-noise ability of the proposed method are demonstrated by the simulation and experimental fringe patterns, respectively. Thus the technique can be used in precision measurement and fine interferometry.     

Variational denoising method for electronic speckle pattern interferometry

Traditional speckle fringe patterns by electronic speckle pattern interferometry (ESPI) are inherently noisy and of limited visibility, so denoising is the key problem in ESPI. We present the variational denoising method for ESPI. This method transforms the image denosing to minimizing an appropriate penalized energy function and solving a partial differential equation. We test the proposed method on computer-simulated and experimental speckle correlation fringes, respectively. The results show that this technique is capable of significantly improving the quality of fringe patterns. It works well as a pre-processing for the fringe patterns by ESPI.     

Batch skeleton extraction from ESPI fringe patterns using pix2pix conditional generative adversarial network

Optical Review - The key to measurement by electronic speckle pattern interferometry (ESPI) is to obtain accurate phase information from the ESPI fringe patterns. We propose a fast batch skeleton...     

The separation of out-of-plane displacement from in-plane components by fringe carrier method based on large image-shearing ESPI

A fringe carrier method for separating out-of-plane displacement from in-plane components based on large image-shearing electronic speckle pattern interferometry (ESPI) is presented. If the test object is respectively illuminated by two expanded symmetric illuminations in large image-shearing ESPI, two interferometers are formed. Carrier fringe patterns can be introduced by tilting reference surface a small angle. The carrier fringe patterns are demodulated after deformation of the object. Two phase maps, which include out-of-plane and in-plane displacement, can be obtained by using Fourier transform. Then out-of-plane displacement can be easily separated from in-plane displacement by simple operation between two unwrapped phase distributions. The principle of spatial carrier frequency modulation in large image-shearing ESPI is discussed. A typical three-point-bending experiment is completed. Experimental results are offered. The results show that the method offers high visibility of carrier fringes. And the system presented does not need a special beam as a reference light and has simple optical setup.     

热传导方程在散斑条纹图相位提取中的应用

去除电子散斑十涉条纹图中的噪声是提取条纹图相位的关键问题.利用热传导方程去除条纹图中的噪声,定性和定量分析了该方法的滤波性能.在此基础上,进一步将MBO算法和热传导方程应用于条纹二值化和相位图平滑过程中,并成功地从单幅模拟条纹图中提取了条纹图的相位.研究结果表明,热传导方程能有效减少散斑条纹图中的噪声,改善二值条纹图的边界.进而获得准确的相位分布.     

Determination of skeleton and sign map for phase obtaining from a single ESPI image

A robust method of determining the sign map and skeletons for ESPI images is introduced in this paper. ESPI images have high speckle noise which makes it difficult to obtain the fringe information, especially from a single image. To overcome the effects of high speckle noise, local directional computing windows are designed according to the fringe directions. Then by calculating the gradients from the filtered image in directional windows, sign map and good skeletons can be determined robustly. Based on the sign map, single image phase-extracting methods such as quadrature transform can be improved. And based on skeletons, fringe phases can be obtained directly by normalization methods. Experiments show that this new method is robust and effective for extracting phase from a single ESPI fringe image.     

大剪切电子散斑干涉的载频调制与位移场测量

将电子散斑干涉场的载波调制引入到大剪切电子散斑干涉中,通过对参考物的微小偏转引入载波条纹;利用傅里叶变换法,解调出了变形场的相位,从而实现了物体变形场的精确测量。讨论了大剪切载频的调制机理,理论分析表明,调制条纹的空间频率与参考面偏转的角度成正比;因此,控制参考面的偏转角度可实现不同位移量系统的调制。利用中心加载周边固定圆盘进行了典型实验,实验结果证明在大剪切电子散斑干涉技术中可以通过参考面的旋转高质量地实现电子散斑干涉条纹的调制,求解位移场。该系统具有系统简单,不需要专门引入参考光,条纹质量好等优点。该技术可扩展电子散斑干涉的应用范围,有一定的实际应用价值。     

A combined method for obtaining fringe orientations of ESPI

Fringe orientation can direct the processing of fringe patterns and provide basic information for understanding the fringe patterns. The gradient method is popularly used for its convenience but it is easily affected by noise. The plane-fit method is capable of obtaining precise local fringe orientation despite the high speckle noise but it is strict with the calculating window size. In this paper, a combined method is proposed. This method uses the plane-fit algorithm to get local gradients and uses the gradient method to get the orientation results from these gradients. It can be seen that this new method can get more accurate orientations for ESPI than both the gradient method and the plane-fit method.     

Automatic analysis of three-dimensional displacement field using ESPI

Electronic speckle pattern interferometry (ESPI) has been used to study the in-plane and out-of-plane displacements of the object. In order to improve the accuracy, a Fourier filtration algorithm has been used to remove the speckle noise and get the holographic-quality ESPI fringe pattern. The processing steps of this method are described in detail in this paper. In addition, a phase shifter, which is easily used with simplified structure and high stability, is also presented. It can be applied to various coherent arrangements in experiments to obtain phase shifted fringe patterns. Experiments of determining the 3D displacement field of a circular fixed plate with a uniform load have been carried out using these methods. The results presented in this paper indicate that the accuracy of this method is satisfactory.     

Electronic speckle-pattern interferometer using holographic optical elements for vibration measurements

We report a simple, compact electronic speckle-pattern interferometer (ESPI) incorporating holographic optical elements (HOEs) for the study of out-of-plane vibration. Reflection and transmission HOEs provide reference and object beams in the interferometer. The alignment difficulties with conventional ESPI systems are minimized using HOEs. The time-average ESPI subtraction method is used to generate the fringe pattern and remove background speckle noise by introducing a phase shift between consecutive images. The amplitude and phase maps are obtained using path-difference modulation.     

Evaluation of a method to determine interferometric phase derivatives

A recently published method for the determination of phase derivatives maps by direct manipulation of three or more phase-shifted interferograms is tested for accuracy. The method is evaluated on computer-simulated holographic and electronic speckle pattern interferometry fringes and the results are assesed through the calculation of two comparative parameters: the relative image difference and the linear correlation coefficient. It is shown that errors in the phase derivative strongly depend on the filtering method used for smoothing the fringe patterns. An experimentally recorded ESPI fringe pattern is used to confirm the predictions of the numerical simulations.     

High-speed ESPI and related techniques: overview and its application in the automotive industry

This paper provides an overview of recent developments and applications of high-speed electronic speckle pattern interferometry (ESPI) and related techniques ranging from high-speed pulsed laser techniques to high-speed camera methods. Different methods for extracting the phase distribution from high-speed ESPI fringe patterns are compared. Unique applications in the automotive industry using these techniques are provided. Finally, the outlook for high-speed ESPI and high-speed digital holographic interferometry are discussed.     

基于非线性偏微分方程的灰度图像骨架线提取方法

基于变分法提出用于计算灰度图像梯度矢量场的非线性偏微分控制方程,利用图像梯度矢量场的拓扑性,可实现骨架线的提取。该方法的主要优点是它的简单性,可直接应用于灰度图像,不需要任何的分割处理。把提出的方法应用于牛顿环干涉条纹中,并与广泛使用的分块二值化细化算法和极值跟踪法进行了比较,实验结果表明了本方法的良好性能。     

Improved evaluation of electronic speckle pattern interferograms by photogrammetric image analysis

Electronic speckle pattern interferometry (ESPI) is a well-established tool for non-destructive testing. It allows the quantitative determination of surface deformations and micro-movements with a sub-micrometer resolution. In the case of objects which are extended in depth, however, the evaluation and interpretation of the resulting correlation fringe patterns can be affected by perspective image distortions as well as by a varying image size. In this paper a method for combination of ESPI with a photogrammetric 3D coordinate measurement is presented. In this way, interferogram data are precisely allocated in 3D-space. Furthermore, it is possible to take into account a spatially varying sensitivity vector. The utilizability of the method is demonstrated by a deformation measurement on a stone sculpture.     

Parameter estimation of optical fringes with quadratic phase using the fractional Fourier transform

Optical fringes with a quadratic phase are often encountered in optical metrology. Parameter estimation of such fringes plays an important role in interferometric measurements. A novel method is proposed for accurate and direct parameter estimation using the fractional Fourier transform (FRFT), even in the presence of noise and obstacles. We take Newton׳s rings fringe patterns and electronic speckle pattern interferometry (ESPI) interferograms as classic examples of optical fringes that have a quadratic phase and present simulation and experimental results demonstrating the performance of the proposed method.     

基于图切割的相位展开

剪切散斑干涉术中,普遍采取相移法提取相位,只可得到被包裹的相位信息,进一步量化计算之前,必须展开相位,但是大量的散斑噪音使相位展开变得非常困难.本文提出基于图切割理论的相位展开算法,将相位展开等价于整数的最优估计问题,通过最小化能量函数展开相位,无需对散斑包裹相位图进行滤波,就可以从包含大量散斑噪音的包裹相位图中准确地提取出真实相位,极大程度地保留了相位包裹图中的细节信息.对于同一幅模拟的散斑包裹相位图,传统的质量导向枝切法和最小二乘法的均方根误差分别为11.7076和4.9775,新算法的均方根误差则为0.9459,数值模拟与实验结果均验证了新算法优良的抗噪性能.     

平行式向列液晶实现相移剪切电子散斑干涉术的研究

研究了向列型液晶的相位调制特性，采用平行式向列液昌作为相移器建立了相移剪切电子散斑干涉计量系统。该方法将相移技术引入到剪切电子散斑干涉术中，提高了检测精度，采用了相关条纹法求解相位，简化了计算；相移方法简单，可靠。用该系统进行应变场的测量实验，取得了满意的效果。     

Point load determination of static elastic moduli using laser speckle interferometry

Electronic speckle interferometry (ESPI) is used to determine the Young's modulus E and Poisson ratio ν of an isotropic material. Micron scale deformations of the surface of the block of polymethyl-methacrylate (PMMA) are induced by normal application of a known near-point force. These deformations are recorded in speckle interferometric fringe patterns. An iterative minimum error inversion technique is developed to obtain the elastic properties from the positions of fringe peaks and troughs observed in the fringe patterns. Sensitivity tests of the method on calculated fringe patterns using measured experimental uncertainties suggest the technique will provide measures of the elastic moduli to better than 5%. In an experimental test on a bloc of PMMA (acrylic) the technique gave values of E and ν that differed from corresponding measures obtained using more conventional strain-gauge methods by less than 4%.     

Mechanical characterization of unplasticised polyvinylchloride thick pipes by optical methods

In this work a number of techniques (electronic speckle pattern interferometry, holographic interferometry, strain gauge and finite element method) are brought to bear in order to establish consistency in the results of strain measurement. This is necessary if optical non-destructive testing methods, such as those used here, are to gain acceptance for routine industrial use. The FE model provides a useful check. Furthermore, ESPI fringe data facilitates the extension of FE models, an approach that is of growing importance in component testing.

The use of in-plane and out-of-plane sensitive electronic speckle pattern interferometry (ESPI) for non-destructive material characterization of thick unplasticised polyvinylchloride (uPVC) pipes is presented. A test rig has been designed for stressing pipes by internal pressure. ESPI gives a complete mapping of the displacement field over the area imaged by the video camera. The results for the strain of uPVC obtained from ESPI data and from strain gauges are in good agreement. The value of Young's modulus has been obtained from the fringe data and compared with results obtained using holographic interferometry and from strain gauge measurements. The FE model also produces fringe data that is consistent with the ESPI results.