Ni-CH_3CH_2NH_2/H_(1.78)Sr_(0.78)Bi_(0.22)Nb_2O_7复合层状钙钛矿的合成及光催化分解水产氢性能(英文)

自从分解水产氢被首次报道以来,许多光催化剂被开发出来并用于光催化分解水产氢.然而,由于光生电子和空穴的复合率普遍较高,大部分的光催化剂分解水产氢效率都很低.因此,开发新型高效的光催化材料至关重要.具有(Bi_2O_2)~(2+)(A_(m-1)M_mO_(3m+1))~(2-)通式的Aurivillius相层状钙钛矿材料因具有独特的层状结构、元素可调性以及优异的电荷传输和分离能力而广泛应用于光催化分解水和去除有机污染物.此外,当该类层状钙钛矿被剥离成超薄纳米片时,其光催化性能进一步提高.为了进一步提高层状钙钛矿的载流子分离能力,将客体(如贵金属,半导体等)通过化学反应的途径插入到层状钙钛矿的层间区域,从而合成出复合层状钙钛矿被广泛发展和应用.然而,引入的客体主要是贵金属和半导体,这类客体的高成本和不均匀分布制约了其进一步的应用.由于廉价、无毒和稳定等优点,镍基材料如Ni,NiO,Ni_2O_3,NiS,NiS_2,Ni(OH)2和Ni(OH)x等被广泛用作增强电极材料的光电性能和催化剂的光催化分解水产氢性能的助催化剂.本文采用简单的原位化学反应法制备出镍基配合物Ni-CH_3CH_2NH_2(Ni-EA)插层的Ni-CH_3CH_2NH_2/H_(1.78)Sr_(0.78)Bi_(0.22)Nb_2O_7(Ni-EA/HSNNs)复合层状钙钛矿;然后采用X-射线衍射(XRD)、傅立叶变换红外光谱(FTIR)、X-射线光电子能谱(XPS)、紫外-可见漫反射光谱等手段对Ni-EA/HSNNs光催化剂进行了系统的研究.XRD结果表明,引入Ni~(2+)后,HSNNs层间距减小并且平行于钙钛矿层的晶面结晶度增强,证明HSNNs沿垂直于钙钛矿层的方向出现了层层组装.FTIR和XPS结果表明,引入的Ni~(2+)与HSNNs层间和表面的乙胺分子之间存在较强的相互作用,结合高分辨透射电镜图可知,Ni的存在形态可能为配合物Ni-EA.由此可见,当向HSNNs中引入Ni~(2+)时,Ni~(2+)和HSNNs层间和表面的乙胺分子反应生成带正电的配合物Ni-EA,由于Ni-EA与HSNNs的钙钛矿层带有异种电荷,两者之间存在较强的静电相互作用力,从而引起钙钛矿纳米片HSNNs的层层组装,最后形成Ni-EA/HSNNs复合层状钙钛矿.光催化分解水产氢性能测试结果表明,当引入0.5 wt%Ni时,复合层状钙钛矿表现出最优的光催化性能.与HSNNs(241.58μmol/h)相比,0.5%Ni-EA/HSNNs的光催化分解水产氢速率(372.67μmol/h)提高了0.54倍,表现出与0.5%Pt/HSNNs可比拟的光催化活性,可见,非贵金属Ni具有替代贵金属Pt的能力.进一步的研究表明,镍基配合物Ni-EA显著增强了催化剂的光生载流子的传输和分离能力,从而提高了其光催化分解水产氢性能.该文为光催化分解水产氢提供了一种简便的合成非贵金属配合物助催化剂的方法.     

Copper-linked hexaniobate lindqvist clusters-variations on a theme

Four new one-dimensional materials and one dimer complex based on the linkage of [Nb6O19] clusters and [CuLx] (L=ethylenediamine (en), NH3, H2O) assemble under ambient conditions. These phases include the following: Rb4[Cu(en)2(H2O)2]3[(Nb6O19H2)2Cu(en)2].24H2O (1), space group P; [Cu(en)2(H2O)2]2[(Nb6O19H2)Cu(en)2].14H2O (2), space group P; Rb2[Cu(NH3)2(H2O)4][Cu(NH3)4(H2O)2]2{[Nb6O19][Cu(NH3)]2}(2).6H2O (3), space group P; {[Nb6O19][Cu(NH3)2(H2O)]2[Cu(H2O)4]2}.3H2O (4), space group P2/n; and {[Nb6O19][Cu(NH3)2(H2O)]2[Cu(H2O)4]2} (5), space group C2/m. All structures have been solved by single-crystal methods, and compounds 1-5 were characterized by thermogravimetric analysis, Fourier transform IR, chemical analysis, and magnetic measurements. It has been demonstrated that the conformation, charge, and geometry of the [Nb6O19]-[CuLx] chains can be modulated by varying the type and amount of the [CuLx]2+ species. The charge balance is provided by mixed Rb+/[CuLx]2+ or [CuLx]2+ cations only for structures 1-3, whereas 4 and 5 are neutral chains with no counterions. There are weak antiferromagnetic Cu2+-Cu2+ interactions in all phases. Compounds 2-5 represent the first examples in which the [Nb6O19] Lindqvist ion forms extended solids rather than dimers or decorated monomers when reacted with transition-metal, cationic complexes.     

Probing crystal structures and transformation reactions of ammonium molybdates by 14N MAS NMR spectroscopy

The unique high-resolution feature offered by 14N magic-angle spinning (MAS) NMR spectroscopy of ammonium ions has been used to characterize the crystal structures of various ammonium molybdates by their 14N quadrupole coupling parameters, i.e., CQ, the quadrupole coupling constant, and etaQ, the asymmetry parameter. Two polymorphs of diammonium monomolybdate, (NH4)2MoO4, recently structurally characterized by single-crystal X-ray diffraction (XRD) and named mS60 and mP60, show distinct but different 14N MAS NMR spectra from each of which two sets of characteristic 14N CQ and etaQ values have been obtained. Similarly, the well-characterized ammonium polymolybdates (NH4)2Mo2O7, (NH4)6Mo7O24.4H2O, and (NH4)6Mo8O27.4H2O also give rise to distinct and characteristic 14N MAS NMR spectra. In particular, it is noted that simulation of the experimental (NH4)6Mo7O24.4H2O spectrum requires an iterative fit with six independent NH4+ sites. For the slow spinning frequencies employed (nu(r) = 1500-3000 Hz), all 14N MAS NMR spectra of the ammonium molybdates in this study are fingerprints of their identity. These different 14N MAS NMR fingerprints are shown to be an efficient tool in qualitative and quantitative assessment of the decomposition of (NH4)2MoO4 in humid air. Finally, by a combination of the 14N and 95Mo MAS NMR experiments performed here, it has become clear that a recent report of the 95Mo MAS spectra and data for the mS60 and mP60 polymorphs of (NH4)2MoO4 are erroneous because the sample examined had decomposed to (NH4)2Mo2O7.     

Preparation, properties, and reactivities of unprecedented oxo-sulfido Nb(IV) aqua ions and crystal structure of (Me2NH2)6[Nb5(mu3-S)2(mu3-O)2(mu2-O)2(NCS)14].3.5H2O

By treatment of Zn-reduced ethanolic solutions of NbCl5 with HCl in the presence of sulfide followed by cation-exchange chromatography, two oxo-sulfido niobium aqua ions, the red [Nb4(mu4-S)(mu2-O)5(H2O)10]4+ and the yellow-brown [Nb5(mu3-S)2(mu3-O)2(mu2-O)2(H2O)14]8+, were isolated. Both readily form their respective thiocyanate complexes, for which the structure for the former has been previously reported. Brown crystals of (Me2NH2)6[Nb5S2O4(NCS)14].3.5H2O (1) were isolated in the case of the latter, and the structure was determined by X-ray crystallography (space group: a = 15.4018(5) A, b = 21.1932(8) A, c = 22.0487(8) A, alpha=gamma = 90 degrees , beta = 103.4590(10) degrees , and R(1) = 0.0659). An unprecedented pentanuclear Nb5S2O48+ core is revealed in which short Nb-Nb distances (2.7995(8)-2.9111(8) A) are consistent with metal-metal bonding. A stopped-flow kinetic study of the 1:1 equilibration of NCS- with [Nb4(mu4-S)(mu2-O)5(H2O)10]4+ has been carried out. Equilibration rate constants are independent of [H(+)] in the range investigated (0.5-2.0 M) and at 25 degrees C; kf= 9.5 M(-1) s(-1), kaq = 2.6 x 10(-2) s(-1), and K = 365 M1). Conditions with first NCS- and then [Nb4(mu4-S)(mu2-O)5(H2O)10]4+ in excess revealed a statistical factor of 4, suggesting the presence of four kinetically equivalent Nb atoms. Attempts to study the 1:1 substitution of NCS- with [Nb5(mu3-S)2(mu3-O)2(mu2-O)2(H2O)14]8+ showed signs of saturation kinetics. Quantum chemical calculations using the density functional theory (DFT) approach were performed on both the Nb4O5S4+ and Nb5O4S28+ naked clusters. The highest occupied and lowest unoccupied molecular orbitals have dominant Nb(4d) character. The HOMO for Nb4O5S4+ is a nondegenerate fully filled MO, whereas for Nb5O4S28+, it is a nondegenerate partially filled MO with one unpaired electron. EPR spectroscopy on [Nb5(mu3-S)2(mu3-O)2(mu2-O)2(H2O)14]8+ shows that the molecule has total anisotropy (C2v), with all three tensors, gx= 2.399, gy= 1.975, and gz= 1.531, resolved. No hyperfine interaction expected from the nuclear moment of I = 9/2 for 93Nb was observed.     

From quantum motifs to assemble nanoaggregates: the preparation of organo-molybdenum hybrid nanostructures

Nanoaggregates such as nanowires, nanoparticles, nanotubules, and nanoribbons were prepared from bulk crystals, which are shaped as needles (1), blocks (2), tubules (3α), and plates (3β), respectively, by grinding and ultrasonication. Nanowires have diameters of approximately 2 nm, lengths of thousands of nanmeters, and the distance between adjacent nanowires is approximately 2 nm. The diameters of nanoparticles range from 3 to 5 nm. Nanotubules display diameters of 70 nm and lengths of thousands of nanometers, and nanoribbons exhibit widths of approximately 50 nm and lengths of hundreds of nanometers. All of the bulk crystals have been synthesized by the wet chemical method. Single-crystal X-ray diffraction reveals that crystal 1 is constituted by infinite one-dimensional {[NH(3)CH(2)CH(NH(2))CH(3)](C(6)H(4)O(2))[μ(2)-OC(6)H(4)O](Mo(VI)-O-Na-O)[NH(2)CH(2)CH(NH(2))CH(3)]}(n) (1), which acts as a parallel aligned quantum wire forming lamellas that assemble themselves into multilayered architecture. Crystal 2 consists of discrete [NH(3)CH(2)CH(NH(2))CH(3)](2)[Mo(VI)O(2)(O(2)C(6)H(4))(2)] (2), which presents as quantum particles and repeats itself along a three-dimensional crystal lattice. Crystal 3α, formed under 5 °C, and 3β, crystallized above 10 °C, are both composed of (NH(3)CH(2)CH(2)NH(2))(2)[Mo(VI)O(2)(O(2)C(6)H(4))(2)](NH(2)CH(2)CH(2)NH(2))(0.5) (3) but are packed in different ways. In crystal 3α, four [Mo(VI)O(2)(O(2)C(6)H(4))(2)](2-) circle into a quantum tube that is further assembled into multitubular architecture. However, in crystal 3β, two [Mo(VI)O(2)(O(2)C(6)H(4))(2)](2-) form a bilayered quantum lamellar motif that is piled into multilayered architecture. TEM reveals that all of the morphologies of the nanoaggregates are associated with the structures of the quantum motifs in their crystal lattices, which provide successful and effective access to assemble controlled nanostructures from quantum motifs of fine-desired and well-ordered bulk crystals. The technology of grinding and ultrasonication to prepare nanoaggregates is simple and available.     

Tetra- to dodecanuclear oxomolybdate complexes with functionalized bisphosphonate ligands: activity in killing tumor cells

We report the synthesis and characterization of five novel Mo-containing polyoxometalate (POM) bisphosphonate complexes with nuclearities ranging from 4 to 12 and with fully reduced, fully oxidized, or mixed-valent (Mo(V), Mo(VI)) molybdenum, in which the bisphosphonates bind to the POM cluster through their two phosphonate groups and a deprotonated 1-OH group. The compounds were synthesized in water by treating [Mo(V)(2)O(4)(H(2)O)(6)](2+) or [Mo(VI)O(4)](2-) with H(2)O(3)PC(C(3)H(6)NH(2))OPO(3)H(2) (alendronic acid) or its aminophenol derivative, and were characterized by single-crystal X-ray diffraction and (31)P NMR spectroscopy. (NH(4))(6)[(Mo(V)(2)O(4))(Mo(VI)(2)O(6))(2)(O(3)PC(C(3)H(6)NH(3))OPO(3))(2)]·12H(2)O (1) is an insoluble mixed-valent species. [(C(2)H(5))(2)NH(2)](4)[Mo(V)(4)O(8)(O(3)PC(C(3)H(6)NH(3))OPO(3))(2)]·6H(2)O (2) and [(C(2)H(5))(2)NH(2)](6)[Mo(V)(4)O(8)(O(3)PC(C(10)H(14)NO)OPO(3))(2)]·18H(2)O (4) contain similar tetranuclear reduced frameworks. Li(8)[(Mo(V)(2)O(4)(H(2)O))(4)(O(3)PC(C(3)H(6)NH(3))OPO(3))(4)]·45H(2)O (3) and Na(2)Rb(6)[(Mo(VI)(3)O(8))(4)(O(3)PC(C(3)H(6)NH(3))OPO(3))(4)]·26H(2)O (5) are alkali metal salts of fully reduced octanuclear and fully oxidized dodecanuclear POMs, respectively. The activities of 2-5 (which are water-soluble) against three human tumor cell lines were investigated in vitro. Although 2-4 have weak but measurable activity, 5 has IC(50) values of about 10 μM, which is about four times the activity of the parent alendronate molecule on a per-alendronate basis, which opens up the possibility of developing novel drug leads based on Mo bisphosphonate clusters.     

Molecular precursors for ferroelectric materials: synthesis and characterization of Bi2M2(mu-O)(sal)4(Hsal)4(OEt)2 and BiM4(mu-O)4(sal)4(Hsal)3(O(i)Pr)4 (sal = O2CC6H4O,Hsal = O2CC6H4OH) (M = Nb,Ta)

Reactions between triphenyl bismuth, salicylic acid, and niobium or tantalum ethoxide have been explored. Four new coordination complexes incorporating bismuth and the group 5 metals niobium or tantalum have been synthesized and characterized spectroscopically, by elemental analysis, and by single crystal X-ray diffraction. The new complexes are Bi(2)M(2)(mu-O)(sal)(4)(Hsal)(4)(OEt)(2) (1a, M = Nb; 1b, M = Ta) and BiM(4)(mu-O)(4)(sal)(4)(Hsal)(3)(O(i)Pr)(4) (sal = O(2)CC(6)H(4)-2-O, Hsal = O(2)CC(6)H(4)-2-OH) (2a, M = Nb; 2b, M = Ta). Complexes 1a and 1b are isomorphous, as are 2a and 2b. The thermal and hydrolytic decomposition of 1a has been explored by DT/TGA and powder X-ray diffraction, while scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) were used to characterize the morphology and composition of the oxides. The heterobimetallic molecules are completely converted to the amorphous bimetallic oxide by heating to 500 degrees C in air. Decomposition of 1a or 1b at 650 degrees C produces the metastable high temperature form of BiNbO(4) as the major crystalline oxide phase. Heating samples of 1a to 850 degrees C favors conversion of the materials to the low temperature phase as well as disproportionation into Bi(5)Nb(3)O(15) and Nb(2)O(5). Thermal decomposition of 1a and 1b produces porous oxides, while hydrolytic decomposition of the complexes has been shown to produce nanometer scale bimetallic oxide particles. The potential of the complexes to act as single-source precursors for ferroelectric materials is considered.     

Single-step thermal carburization synthesis of Supported molybdenum carbides from molybdenum-containing methyl-silica

A novel synthesis route to obtain highly dispersed molybdenum carbides in porous silica is described. The synthesis was carried out by a single-step heat treatment of molybdenum-containing and methyl-modified silica (Mo-M-SiO2) in argon atmosphere at 973 K. Mo-M-SiO2 precursor was facilely obtained via a one-pot synthesis route, using (NH4)6Mo7O24 4H2O (AHM) as molybdenum sources and polymethylhydrosiloxane (PMHS) as silica sources at the initial synthetic step. The optimal C/Mo molar ratio in reaction system for complete carburization of molybdenum species was 7. The carburization process of molybdenum species followed a nontopotactic route involving a MoO2 intermediate phase, which was evidenced by XRD, N2 adsorption-desorption and in situ XPS. Formation mechanism of Mo-M-SiO2 precursor was also proposed by observation of the reaction between AHM and PMHS with TEM. Furthermore, by adding TEOS into silica sources and adjusting TEOS/PMHS mass ratio, crystal phase of molybdenum carbides transferred from β-Mo2C to α-MoC1-x, and SiO2 structure changed from microporous to micro/mesoporous. Catalytic performances of samples were tested using CO hydrogenation as a probe reaction. The supported molybdenum carbides exhibited high selectivity for higher alcohol synthesis compared with bulk β-Mo2C and α-MoC1-x.     

A novel organic-inorganic hybrid based on an 8-electron-reduced Keggin polymolybdate capped by tetrahedral, trigonal bipyramidal, and octahedral zinc: synthesis and crystal structure of (CH3NH3)(H2bipy)[Zn4(bipy)3(H2O)2MoV8MoVI4O36)(PO4)].4H2O

Hydrothermal reaction of H(3)PO(3), CH(3)NH(2), zinc(II) acetate, 4,4'-bipyridine (bipy), and (NH(4))(6)Mo(7)O(24).4H(2)O at 180 degrees C led to a novel organic-inorganic layered hybrid, [CH(3)NH(3)][H(2)bipy][Zn(4)(bipy)(3)(H(2)O)(2)Mo(V)(8)Mo(VI)O(36)(PO(4))].4H(2)O (1). Its structure was established by single-crystal X-ray diffraction. It crystallizes in the monoclinic space group P2(1)/c with cell parameters of a = 17.3032(2), b = 17.8113(3), and c = 23.4597 (4) A, beta = 106.410(1) degrees, V = 6935.6(2) A(3), and Z = 4. The structure of compound 1 features a novel 2D layer built from the 8e-reduced tetracapped Keggin [Zn(4)Mo(12)O(36)(PO(4))](3)(-) anions, which are further interconnected by bridging bipy ligands. The four zinc(II) ions are in tetrahedral, trigonal bipyramidal, and octahedral coordination geometries, respectively.     

新型氧离子导体La2Mo1.9Al0.1O9-α陶瓷的合成及电性能

通过高温固相法合成了La2Mo1.9Al0.1O9-α陶瓷样品. XRD测试结果表明, 该样品为一立方相结构, Al3＋离子在 Mo6＋位置的固溶摩尔浓度为5%时能完全抑制La2Mo2O9的相变. 采用交流阻抗谱、氧浓差电池、氧泵等电化学方法系统地研究了该陶瓷样品在600～1000 ℃下的离子导电特性. 结果表明, 氧浓差电池电动势的实测值与理论值吻合得很好, 离子迁移数为1, 表明该陶瓷样品在该温度下氧气气氛中为一纯离子导体; 氧浓差电池放电及氧的电化学透过(氧泵)实验结果进一步证实了该样品在氧气气氛中为一纯氧离子导体; 1000 ℃时其氧离子电导率达到了0.12 S•cm－1, 明显高于相同条件下母体及La2Mo1.9Ga0.1O9-α的氧离子电导率.     

Structure and properties of the Mo3Nb2O14 oxide

Mixed Nb-Mo oxides were prepared by solid-state reaction of Nb(V) and Mo(VI) oxides at 973-1123 K. Optimal conditions were determined for the formation of the Mo3Nb2O14 compound. As established by Rietveld refinement of the powder X-ray diffraction patterns, the Mo3Nb2O14 oxide has the tetragonal cell with a = 23.150(6) A and c = 3.998(4) A and a tunnel structure similar to that of the Mo5O14 oxide. The solids were characterized by several physical techniques, including scanning and transmission electron microscopy, FT-IR, UV-visible diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, and electron spin resonance spectroscopy. It has been shown that the Mo3Nb2O14 solid prepared in air at 973-1073 K after cooling to room temperature contains high amounts of Mo(V) species (ca. 1% of total molybdenum). The presence of paramagnetic species correlates with the intense green color of the solids and the strong d-d transition band in the UV-visible spectra, typical for the d1 species. The amount of paramagnetic species does not depend on the solid annealing and/or on the small variations of its composition. Neither is it related to the oxygen release upon the solid heating, being therefore an intrinsic property of the Mo3Nb2O14 oxide. The unusual stabilization of reduced Mo species in the highly oxidizing conditions was explained by the substitution disorder between Nb and Mo atoms. It is supposed that a configuration containing mu3 oxygen bonded to three Mo(VI) atoms is unstable and decomposes, leading to a Mo(V) center and a hole in the valence band.     

Photocatalyst of lamellar aggregates of RuOx-loaded perovskite nanosheets for overall water splitting

Overall photocatalytic splitting of water was achieved using a restacked aggregate of exfoliated nanosheets of Ca(2)Nb(3)O(10), which was synthesized by flocculating a colloidal suspension of the nanosheets with alkali-metal ions and a trace amount of ruthenium red, a trinuclear complex of ([(NH(3))(5)Ru-O-Ru(NH(3))(4)-O-Ru(NH(3))(5)]Cl(6). The as-restacked material showed the evolution of H(2) gas from water immediately after UV irradiation, while O(2) evolution was observed only after some induction time, which may be understood by the possible oxidation of ruthenium red to RuO(x) in the initial stage. The restacked aggregate, which was heated at 773 K to convert the ruthenium complex to the oxide, underwent the stoichiometric splitting of water upon initiation of UV illumination, verifying the hypothesis. Total decomposition of water could not be attained with the bulk layered host of KCa(2)Nb(3)O(10) as well as its RuO(x)-loaded forms obtained via a conventional impregnation procedure. This clearly demonstrates the effectiveness of the present exfoliation-restacking route for loading RuO(x) to improve and enhance the photocatalytic activities of layered semiconducting materials. A homogeneous distribution of RuO(x)was suggested by XPS depth-profile analysis on the materials obtained through the exfoliation-restacking process.     

Determination of the chemical nature of active surface sites present on bulk mixed metal oxide catalysts

CH3OH temperature programmed surface reaction (TPSR) spectroscopy was employed to determine the chemical nature of active surface sites for bulk mixed metal oxide catalysts. The CH3OH-TPSR spectra peak temperature, Tp, for model supported metal oxides and bulk, pure metal oxides was found to be sensitive to the specific surface metal oxide as well as its oxidation state. The catalytic activity of the surface metal oxide sites was found to decrease upon reduction of these sites and the most active surface sites were the fully oxidized surface cations. The surface V5+ sites were found to be more active than the surface Mo6+ sites, which in turn were significantly more active than the surface Nb5+ and Te4+ sites. Furthermore, the reaction products formed also reflected the chemical nature of surface active sites. Surface redox sites are able to liberate oxygen and yield H2CO, while surface acidic sites are not able to liberate oxygen, contain either H+ or oxygen vacancies, and produce CH3OCH3. Surface V5+, Mo6+, and Te4+ sites behave as redox sites, and surface Nb5+ sites are Lewis acid sites. This experimental information was used to determine the chemical nature of the different surface cations in bulk Mo-V-Te-Nb-Ox mixed oxide catalysts (Mo(0.6)V(1.5)Ox, Mo(1.0)V(0.5)Te(0.16)Ox, Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox). The bulk Mo(0.6)V(1.5)Ox and Mo(1.0)V(0.5)Te(0.16)Ox mixed oxide catalytic characteristics were dominated by the catalytic properties of the surface V5+ redox sites. The surface enrichment of these bulk mixed oxide by surface V5+ is related to its high mobility, V5+ possesses the lowest Tammann temperature among the different oxide cations, and the lower surface free energy associated with the surface termination of V=O bonds. The quaternary bulk Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox mixed oxide possessed both surface redox and acidic sites. The surface redox sites reflect the characteristics of surface V5+ and the surface acidic sites reflect the properties normally associated with supported Mo6+. The major roles of Nb5+ and Te4+ appear to be that of ligand promoters for the more active surface V and Mo sites. These reactivity trends for CH3OH ODH parallel the reactivity trends of propane ODH because of their similar rate-determining step involving cleavage of a C-H bond. This novel CH3OH-TPSR spectroscopic method is a universal method that has also been successfully applied to other bulk mixed metal oxide systems to determine the chemical nature of the active surface sites.     

How does the synthesis temperature impact hybrid organic-inorganic molybdate material design?

We investigate the reactivity of MoO(4)(2-) toward six organoammonium cations (+)(Me(3-x)H(x)N)(CH(2))(2)(NH(y)Me(3-y))(+) (x, y = 1-3) at different synthesis temperatures ranging from 70 to 180 °C. A total of 16 hybrid organic-inorganic materials have been synthesized at an initial pH of 2, via ambient pressure and hydrothermal routes, namely, (H(2)en)[Mo(3)O(10)]·H(2)O (1), (H(2)en)[Mo(3)O(10)] (2), (H(2)en)[Mo(5)O(16)] (3), (H(2)MED)(2)[Mo(8)O(26)]·2H(2)O (4), (H(2)MED)[Mo(5)O(16)] (5), (N,N-H(2)DMED)(2)[Mo(8)O(26)]·2H(2)O (6), (N,N-H(2)DMED)(2)[Mo(8)O(26)]·2H(2)O (7), (N,N'-H(2)DMED)(2)[Mo(8)O(26)] (8), (N,N'-H(2)DMED)[Mo(5)O(16)] (9), (H(2)TriMED)(2)[Mo(8)O(26)]·4H(2)O (10), (H(2)TriMED)(2)[Mo(8)O(26)]·2H(2)O (11), (H(2)TriMED)[Mo(7)O(22)] (12), (H(2)TMED)(2)[Mo(8)O(26)]·2H(2)O (13), (H(2)TMED)(2)[Mo(8)O(26)] (14), (H(2)TMED)(2)[Mo(8)O(26)] (15), and (H(2)TMED)[Mo(7)O(22)] (16). All of these compounds contain different polyoxomolybdate (Mo-POM) blocks, i.e., discrete β-[Mo(8)O(26)](4-) blocks in 6, 10, 13, 14, (1)/(∞)[Mo(3)O(10)](2-), and (1)/(∞)[Mo(8)O(26)](4-) polymeric chains in 1, 2, 4, 7, 8, and 15, respectively, and (2)/(∞)[Mo(5)O(16)](2-) and (2)/(∞)[Mo(7)O(22)](2-) layers in 3, 5, 9, 12, and 16, respectively. The structures of 5, 9, and 14 have been resolved by single-crystal X-ray analyses. The characterization of the different Mo-POM blocks in 1-16 by Fourier transform Raman spectroscopy is reported. The impact of the synthesis temperature on both the composition and topology of the Mo-POM blocks is highlighted.     

Photoreductive self-assembly from [Mo7O24]6- to carboxylates-coordinated {Mo142} Mo-blue nanoring in the presence of carboxylic acids

The primary steps of the photoredox reaction between [Mo7O24]6- and carboxylic acid electron (and proton) donors in aqueous solutions are investigated by the chemically induced dynamic electron spin polarization (CIDEP) spectroscopy. The excitation of the O-->Mo ligand-to-metal charge-transfer (LMCT) bands of [Mo7O24]6- in the presence of CH3CO2H induces the emissive electron spin polarization (ESP) of *CH2CO2 and *CH3 radicals with an accompanying formation of the one-electron reduced species [Mo7O23(OH)]6-, which is demonstrated by the triplet mechanism involving the O --> Mo LMCT triplet states. The prolonged photolysis of the solution containing [Mo7O24]6- and CH3CO2H at pH = 3.4 leads to the formation of the acetate/propionate-coordinated {Mo142} Mo-blue nanoring, [MoV28MoV(I)114O429H10(H2O)(49)(CH3)CO2 triple bond Ac5(C2H5CO2 triple bond Pr)]30- (1a) through the formation of the cis-configured dimeric dehydrative condensation to two-electron reduced Mo-blue [(Mo7O23)2]10- ({Mo14}). 1a is isolated as a [NH4]+/[Me3NH]+-mixed salt which is formulated as [NH4]27[Me3NH]3[Mo(V)28Mo(VI)114O429H10(H2O)49(CH3CO2)5(C2H5CO2)].150 +/- 10H2O (1) by results of elementary analysis, single-crystal X-ray analysis, 1H NMR, IR, and UV/Vis measurements, and manganometric redox titration. Based on the building-block sequence of for 1a, the bottom-up processes from [Mo7O24]6- to the {Mo142} ring in the coexistence of beta-[Mo8O26]4- are discussed by (i) the stabilization of the molecular curvature of {Mo14} through both the intramolecular transfer of monomolybdates and the intermolecular transfer of monomolybdates as degradation fragments of beta-[Mo8O26]4-, to yield {Mo21} and {Mo20} building blocks, (ii) the outer-ring formation resulting from seven successive two-electron-photoreductive condensations among {Mo21} and {Mo20}, and (iii) inner-ring formation resulting from eight successive dehydrative condensations between monomolybdate linkers attached to the neighboring head Mo sites.     

Hydrothermal synthesis and structure of a new helical chain constructed from only molybdenum-oxide building blocks

The compound [NH(3)(CH(2))(2)NH(2)(CH(2))(2)NH(3)](2)[Mo(9)O(30)] was synthesized at 170 degrees C via hydrothermal techniques from the starting materials of Na(2)MoO(4).H(2)O, NH(2)(CH(2))(2)NH(CH(3))(2)NH(2), and H(2)O. The compound crystallizes in the space group C2/c of the monoclinic system with a = 21.308(4) A, b = 9.234(2) A, c = 19.195(4) A, beta = 120.27(3) degrees, V = 3261.9(11)A(3), Z = 4. Two novel and symmetrically related helices coexist in the centrosymmetric solid, in which the two kinds of helices appear in the left-handed and right-handed enantiomorphs, respectively. This is the first example of a helical chain structure consisting of only molybdenum-oxide building blocks. The central axis about each helical chain is a 2-fold screw axis.     

Synthesis, structure, and magnetic properties of the oxalate-based bimetallic ferromagnetic chain {[K(18-crown-6)][Mn(H2O)2Cr(ox)3]}infinity (18-crown-6 = C12H24O6, ox = C2O4(2-))

The salt [K(18-crown-6)][Mn(H2O)2Cr(ox)3.0.5(18-crown-6) (1) has been prepared and structurally and magnetically characterized. It crystallizes in the P2(1)/c space group [a = 21.011(2) A, b = 11.265(2) A, c = 15.748(3) A, beta = 105.952(6) degrees , V = 3584(1) A3, and Z = 4] and contains [Mn(H2O)2Cr(ox)3]infinity chains connected through hydrogen bonding to form 2D anionic networks. The magnetic exchange is ferromagnetic [J = +2.23(2) cm(-1)] in the chain and also in between chains, reaching bulk ferromagnetic ordering below 3.5 K.     

Homo- and heterobimetallic niobium(v) and tantalum(v) peroxo-tartrate complexes and their use as molecular precursors for Nb-Ta mixed oxides

New water-soluble bimetallic peroxo-tartrato complexes of niobium(V) and/or tantalum(V) have been prepared, characterized from the structural and spectroscopic point of view, and used as molecular precursors for Nb-Ta mixed oxides. Two new homometallic complexes, (gu)5[Nb2(O2)4(tart)(Htart)] x 4H2O (1a) and (gu)6[Ta2(O2)4(tart)2] x 4H2O (2a), and the corresponding heterometallic complex, (gu)5[NbTa(O2)4(tart)(Htart)] x 4H2O (3), have been obtained. The crystal structures of the homometallic compounds, (gu)5[Nb2(O2)4(tart)(Htart)] x 6H2O x 1H2O2 (1b) and (gu)6[Ta2(O2)4(tart)2] x 6H2O (2b), have been determined, showing, for both cases, two 8-fold-coordinated metal atoms, each surrounded by oxygen atoms belonging to two bidentate peroxides, two monodentate carboxylato, and two alkoxo groups from both bridging tartrato ligands. The coordination polyhedron around each metal atom is a dodecahedron. The thermal treatment of complexes 1a, 2a, and 3 in air at 700 or 800 degrees C, depending of the Ta content, provided Nb2O5, Ta2O5, and the solid solution TaNbO5, respectively. The thermal treatment of a 1:1 Nb/Ta molar ratio mixture of 1a and 2a has also been studied. BET and SEM measurements have been carried out and reveal these oxides possess relatively high specific surface areas and display a porous character. Comparison between the use of homo- and heterometallic precursors is discussed.     

Synthesis and Crystal Structure of an Incomplete Cubane-type Mo3S4 Cluster with the N-N-O Type Tridentate Ligand:{Mo3S4[NH2CH2CH(O)CH2NH2]3}(DTP)·(H2O)2·(DMF)

A new cluster {Mo3S4[NH2CH2CH(O)CH2NH2]3}(DTP)·(H2O)2·(DMF) (DTP = diethyldithiophosphate) has been synthesized via ligand substitution reaction of Mo3S4(DTP)4(H2O) with an alkaline ligand 1,3-diamino-2-propanol(DAPROH) in a mixed organic solvent, and its crys- tal structure was determined with the following data: Mo3S6PC16H48O8N7, Mr = 977.76, triclinic, space group P, Z = 2, a = 10.319(2), b = 12.843(3), c = 15.335(3)(A), α = 65.26(3), β = 82.18(3), γ = 70.67(3)o, V = 1741.7(6) (A)3, Dc = 1.864 g/cm3, μ = 1.517 mm-1, F(000) = 988, the final R = 0.0794 and wR = 0.2111 for 6318 observed reflections (I>2σ(I)). The structure analysis indicates that all DTP ligands of Mo3S4(DTP)4(H2O) are replaced and each DAPRO molecule acts as a tri- dentate ligand chelating to each Mo atom of the Mo3S4 core. Different from the precursor, the clus- ter symmetry is elevated to C3. In addition, the UV-spectrum of the title compound was measured.     

Polyoxomolybdenum(V/VI)-sulfite compounds: synthesis, structural, and physical studies

Reaction of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) in the mixed-solvent system H(2)O/CH(3)CN (pH = 5) resulted in the formation of the tetranuclear cluster (NH(4))(4)[Mo(4)(VI)SO(16)] x H(2)O (1), while the same reaction in acidic aqueous solution (pH = 5) yielded (NH(4))(4)[Mo(5)(VI)S(2)O(21)] x 3H(2)O (2). Compound {(H(2)bipy)(2)[Mo(5)(VI)S(2)O(21)] x H(2)O}(x) (3) was obtained from the reaction of aqueous acidic solution of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) (pH = 2.5) and 4,4'-bipyridine (4,4'-bipy). The mixed metal/sulfite species (NH(4))(7)[Co(III)(Mo(2)(V)O(4))(NH(3))(SO(3))(6)] x 4H(2)O (4) was synthesized by reacting Na(2)Mo(VI)O(4) x 2H(2)O with CoCl(2) x 6H(2)O and (NH(4))(2)SO(3) with precise control of pH (5.3) through a redox reaction. The X-ray crystal structures of compounds 1, 2, and 4 were determined. The structure of compound 1 consists of a ring of four alternately face- and edge-sharing Mo(VI)O(6) octahedra capped by the trigonal pyramidal sulfite anion, while at the base of the Mo(4) ring is an oxo group which is asymmetrically shared by all four molybdenum atoms. Compound 3 is based on the Strandberg-type heteropolyion [Mo(5)(VI)S(2)O(21)](4-), and these coordinatively saturated clusters are joined by diprotonated 4,4'-H(2)bipy(2+) through strong hydrogen bonds. Compound 3 crystallizes in the chiral space group C2. The structure of compound 4 consists of a novel trinuclear [Co(III)Mo(2)(V)SO(3)(2-)] cluster. The chiral compound 3 exhibits nonlinear optical (NLO) and photoluminescence properties. The assignment of the sulfite bands in the IR spectrum of 4 has been carried out by density functional calculations. The cobalt in 4 is a d(6) octahedral low-spin metal atom as it was evidenced by magnetic susceptibility measurements, cw EPR, BVS, and DFT calculations. The IR and solid-state UV-vis spectra as well as the thermogravimetric analyses of compounds 1-4 are also reported.