飞秒激光对氟化镁烧蚀机理研究

用扫描电镜(SEM)研究了氟化镁在800nm超短脉冲激光作用下的单枪表面烧蚀形貌.根据烧蚀斑面积与激光脉冲能量间的对数关系，测得烧蚀阈值与激光脉宽的关系曲线(55—750fs).计算了导带电子的双光子吸收，改进了多速率方程模型，很好地解释了实验结果. 关键词： 飞秒激光 氟化镁 烧蚀机理 双光子吸收     

飞秒激光烧蚀硅表面产生等离子体的发射光谱研究

对中心波长为800 nm,脉宽为100 fs的激光脉冲烧蚀空气中硅(111)产生的等离子体发射光谱进行了时间和空间分辨研究. 结果表明,在等离子体羽膨胀初期(小于50 ns时间范围内),等离子体发射光谱主要由连续光谱构成,此后连续光谱强度逐渐减弱,线状光谱开始占主导地位;在羽体膨胀过程中离子谱线的存在时间短于原子谱线的存在时间. 由时间分辨发射光谱发现在羽体膨胀过程中等离子体辐射波长存在红移现象,波长红移量随时间演化呈二次指数衰减. 最后给出等离子体发射光谱谱线强度的时空演化规律. 关键词： 飞秒激光 脉冲激光烧蚀 等离子体 发射光谱     

PMP泡沫的飞秒激光烧蚀及切割方法

对密度为90 mg/cm3的PMP泡沫材料的飞秒激光烧蚀结果进行了分析,推导出该材料在脉宽50 fs、波长800 nm、重复频率为1000 Hz的飞秒激光作用下的蚀除阈值为0.91 J/cm2（100个激光脉冲）,获得了烧蚀直径分别随激光功率、脉冲数及聚焦物镜数值孔径的变化规律。相同飞秒激光加工系统下,对比了铜箔上获得的烧蚀形状,确定了PMP泡沫材料本身的多孔洞及其分布不均匀是造成烧蚀区域的形状不规则的重要因素。PMP泡沫在较高能量或是较长时间的飞秒激光作用下,烧蚀区域发生碳化的原因是由热作用引发的。提出了一种基于激光束耦合的飞秒激光切割厚度大于1 mm的薄膜-泡沫材料的方法,并获得了切割厚度大于1.5 mm、切割侧壁与光束光轴夹角小于5、切割面整洁的薄片。     

多脉冲飞秒激光对锗材料的烧蚀效应

 开展了脉宽为40 fs的不同数量激光脉冲对锗材料的烧蚀效应实验,采用扫描电镜、激光共聚焦显微镜等方法对不同数量的飞秒激光脉冲作用下锗材料表面烧蚀区进行了检测,并对作用后材料烧蚀形貌演化规律进行了分析,初步分析了锗材料烧蚀区周围形成的不同环区的形貌特征及成因,对各环区烧蚀形貌特征随激光作用脉冲数的增加而产生的形貌演化过程进行了观测。并给出单脉冲飞秒激光对锗材料的烧蚀阈值为1.2 J·cm^-2,采用激光共聚焦显微镜测得该阈值条件下单个飞秒激光脉冲对锗材料的烧蚀深度约为150 nm。     

多脉冲飞秒激光对锗材料的烧蚀效应

开展了脉宽为40 fs的不同数量激光脉冲对锗材料的烧蚀效应实验,采用扫描电镜、激光共聚焦显微镜等方法对不同数量的飞秒激光脉冲作用下锗材料表面烧蚀区进行了检测,并对作用后材料烧蚀形貌演化规律进行了分析,初步分析了锗材料烧蚀区周围形成的不同环区的形貌特征及成因,对各环区烧蚀形貌特征随激光作用脉冲数的增加而产生的形貌演化过程进行了观测。并给出单脉冲飞秒激光对锗材料的烧蚀阈值为1.2 J·cm-2,采用激光共聚焦显微镜测得该阈值条件下单个飞秒激光脉冲对锗材料的烧蚀深度约为150 nm。     

飞秒激光烧蚀金属靶的冲击温度

在明确飞秒激光与物质相互作用过程冲击温度概念的基础上, 讨论了飞秒激光烧蚀铝靶和铜靶过程中的冲击温度与其他物理量的关系, 利用飞秒激光烧蚀金属的双温模型提取了冲击温度的绝对值, 基于非傅里叶热传导模型计算了冲击温度的分布. 此项研究结果对飞秒激光安全加工含能材料有借鉴意义. 关键词： 飞秒激光 含能材料 烧蚀 冲击温度     

单脉冲飞秒激光烧蚀炸药过程的热效应研究

飞秒激光能够在极短时间内烧蚀炸药产生高温高压等离子体。可以利用飞秒激光对含能材料或含能元器件进行精密加工。深入认识飞秒激光烧蚀炸药过程中,炸药内部的热效应是发展飞秒激光加工炸药技术的基础。建立了单脉冲飞秒激光烧蚀炸药过程的流固耦合计算模型,考虑了在高温高压等离子体和炸药自热反应的共同作用下,炸药内部的热效应。对飞秒激光烧蚀TNT炸药过程进行了流体力学数值模拟。计算结果表明：TNT炸药中未烧蚀区域产生了热效应,峰值温度高于TNT炸药的点火温度,但由于炸药内热效应区域极小,高温持续时间极短,因此炸药内温度迅速下降,没有发生点火现象。     

飞秒激光烧蚀氟化钙晶体表面特性

采用飞秒激光对氟化钙晶体表面进行加工。通过调控激光参数,采用静止聚焦和动态扫描两种方式在晶体表面加工出一系列微结构(烧蚀孔和烧蚀线)。分别对两种加工方式烧蚀后的氟化钙晶体表面微结构进行系统研究,包括参数依赖关系、材料表面烧蚀阈值等。计算结果表明:在静止聚焦情况下,累积因子为0.0033;在动态扫描情况下,当扫描方向与激光偏振方向垂直或平行时,累积因子分别为0.0043和0.0052。飞秒激光加工过程中的脉冲累积效应能够对晶体的烧蚀产生重要影响。     

飞秒激光脉冲序列烧蚀硅的孔型质量研究

为了改善高能流密度飞秒激光的烧蚀质量,使用法布里珀罗腔产生子脉冲间隔在1～3 500 ps内连续可调的飞秒激光脉冲序列,系统探究了单个飞秒高斯脉冲与不同脉冲间隔的脉冲序列在硅上烧蚀的孔型质量。实验结果显示,子脉冲间隔在50～100 ps范围内时,孔边缘的冠状重熔物大大减少,其厚度仅为单个飞秒高斯脉冲的40%,周围基底几乎没有粘连的粉尘或热损伤痕迹,孔型品质因子数值从单个飞秒脉冲的0.52提升至0.89。本文报道的飞秒激光脉冲序列,基于后续子脉冲与喷出物的二次烧蚀原理,子脉冲间隔在50～100 ps范围内时,后续子脉冲能够最大程度的雾化喷出物,从而减少冠状重熔物与高温粉尘污染损伤,烧蚀质量得到改善。     

Designs for optimizing depth of focus and spot size for UV laser ablation

The proposed optical systems are designed for extending the depths of foci (DOF) of UV lasers, which can be exploited in the laser-ablation technologies, such as laser machining and lithography. The designed systems are commonly constructed by an optical module that has at least one aspherical surface. Two configurations of optical module, lens-only and lens-reflector, are presented with the designs of 2-lens and 1-lens-1-reflector demonstrated by commercially optical software. Compared with conventional DOF-enhanced systems, which required the chromatic aberration lenses and the light sources with multiple wavelengths, the proposed designs are adapted to the single-wavelength systems, leading to more economical and efficient systems.     

Manipulation of doughnut focal spot by image inverting interferometry

Based on image inverting interference combined with phase modulation, we theoretically demonstrate that the doughnut focal spot can readily be manipulated, and either shrinkage or expansion of size of the central dark spot is possible in a large scale (peak-to-peak value: 0.555λ-0.830λ, or 93.3%-140.8% compared with the standard one). As the interference and phase modulation can both be achieved by a double Porro prism, it is feasible to introduce this approach into optical tweezers to improve their performance. As much as 33.9% intensity of stimulated emission depletion (STED) beam can be reduced if the further optimized configuration is utilized in STED microscopy.     

Laser ablation threshold determination by photoelectric emission

Laser-induced surface damage introduces a dramatic change in the photoelectric properties of metallic and semiconductor substrates. Hence, by varying the applied laser intensity, ultra-short- pulsed laser-induced photoemission (in the mono- or multiphotonic regime according to the applied wavelength) can be used to monitor in situ surface structural changes. Results for a model system (thin diamond-like carbon (DLC) layer on an Si carrier) are presented, where, after ablation of the DLC layer, we observed a rapid increase in the photoelectric contribution from the underlying substrate. High-sensitivity measurements are presented for Au and W substrates where due to laser- induced damage within the escape depth of electrons and because of the apparition of ionized species upon ablation, the measured charge can indicate the onset of surface damage. Results are presented for various wavelengths (213 nm, 266 nm and 532 nm) and discussed in the light of previous results of threshold measurements obtained by optical methods.     

Geometrically robust image watermarking using scale-invariant feature transform and Zernike moments

In order to resist geometric attacks, a robust image watermarking algorithm is proposed using scaleinvariant feature transform (SIFT) and Zernike moments. As SIFT features are invariant to rotation and scaling, we employ SIFT to extract feature points. Then circular patches are generated using the most robust points. An invariant watermark is generated from each circular patch based on Zernike moments.The watermark is embedded into multiple patches for resisting locally cropping attacks. Experimental results show that the proposed scheme is robust to both geometric attacks and signal processing attacks.     

Thermal feature extraction of servers in a datacenter using thermal image registration

Thermal cameras provide fine-grained thermal information that enhances monitoring and enables automatic thermal management in large datacenters. Recent approaches employing mobile robots or thermal camera networks can already identify the physical locations of hot spots. Other distribution information used to optimize datacenter management can also be obtained automatically using pattern recognition technology. However, most of the features extracted from thermal images, such as shape and gradient, may be affected by changes in the position and direction of the thermal camera. This paper presents a method for extracting the thermal features of a hot spot or a server in a container datacenter. First, thermal and visual images are registered based on textural characteristics extracted from images acquired in datacenters. Then, the thermal distribution of each server is standardized. The features of a hot spot or server extracted from the standard distribution can reduce the impact of camera position and direction. The results of experiments show that image registration is efficient for aligning the corresponding visual and thermal images in the datacenter, and the standardization procedure reduces the impacts of camera position and direction on hot spot or server features.     

Plasma dynamics and determination of ablation parameters using the near-target magnified imaging during pulsed laser ablation

A comparative study of the ultrafast dynamics on ZnO thin films deposited on flat Si substrates and on Si micro-cones following ultrashort laser excitation has been carried out using time-resolved optical spectroscopy. By monitoring the transient band gap renormalization induced by nonlinearly excited carriers it is found that fast electron scattering and trapping occurs more efficiently in the micro-cones as compared to the flat films. This enhanced trapping efficiency is attributed to the defects and imperfections that are introduced by the increased surface roughness due to the conical shape.     

Effective signal-to-noise ratio improvement by parametric image amplification

We show experimentally that parametric optical preamplification greatly improves the signal-to-noise ratio of an image if the detector has a poor quantum efficiency and/or a great level of readout noise. Results are fully consistent with the theory of quantum-noise-limited amplification.     

Reflected image of a strongly focused spot

We describe the reflection of a strongly focused beam from an interface between two dielectric media. If the beam is incident from the optically denser medium, the image generated by the reflected light is strongly aberrated. This situation is encountered in high-resolution confocal microscopy and data sampling based on solid immersion lenses and oil immersion objectives. The origin of the observed aberrations lies in the nature of total internal reflection, for which there is a phase shift between incident and reflected waves. This phase shift displaces the apparent reflection point beyond the interface, similarly to the Goos-H?nchen shift.     

轫致辐射中电子束焦斑漂移现象的抑制

电子束焦斑偏离轴线中心的现象严重影响器件辐射效应实验的效率。介绍了一种简单有效的抑制电子束焦斑偏心的方法,研制了一种小尺寸不锈钢阴极,比较了不锈钢阴极和传统环形天鹅绒阴极在"强光一号"装置上的实验结果。实验结果表明对于小尺寸不锈钢阴极,最大辐射剂量位于靶面中心的概率为67%,位于35mm圆圈内的概率为100%。相比传统环形天鹅绒阴极(最大剂量落于中心位置的概率约20%,有60%以上概率偏离中心2~3cm)的实验统计数据,焦斑的偏心现象得到明显的抑制。     

轫致辐射中电子束焦斑漂移现象的抑制

电子束焦斑偏离轴线中心的现象严重影响器件辐射效应实验的效率。介绍了一种简单有效的抑制电子束焦斑偏心的方法,研制了一种小尺寸不锈钢阴极,比较了不锈钢阴极和传统环形天鹅绒阴极在强光一号装置上的实验结果。实验结果表明对于小尺寸不锈钢阴极,最大辐射剂量位于靶面中心的概率为67%,位于f35 mm圆圈内的概率为100%。相比传统环形天鹅绒阴极(最大剂量落于中心位置的概率约20%,有60%以上概率偏离中心2~3 cm)的实验统计数据,焦斑的偏心现象得到明显的抑制。