Supercapacitor based on graphene and ionic liquid electrolyte

A new kind of supercapacitor by using chemical reduced graphene (CRG) as electrode material and ionic liquid with addition of acetonitrile as electrolyte is assembled and investigated. CRG materials with high surface area are prepared by chemical reduction of graphene oxide. The capacitive properties of the supercapacitor composed of the CRG and ionic liquid electrolyte are studied by electrical impedance spectroscopy, cyclic voltammetry and galvanostatic charge–discharge. With the combined advantages of graphene and ionic liquid, the supercapacitor shows perfect performance. The supercapacitor possesses wide cell voltage and good stability. The specific capacitance, energy density, and specific power density of the present supercapacitor are 132?Fg^??, 143.7?Wh?kg^??, and 2.8?kW?kg^??, respectively. The results demonstrate the potential application of electrical energy storage devices with high performance based on this new kind of supercapacitor.     

Supercapacitor based on graphene and ionic liquid electrolyte

A new kind of supercapacitor by using chemical reduced graphene (CRG) as electrode material and ionic liquid with addition of acetonitrile as electrolyte is assembled and investigated. CRG materials with high surface area are prepared by chemical reduction of graphene oxide. The capacitive properties of the supercapacitor composed of the CRG and ionic liquid electrolyte are studied by electrical impedance spectroscopy, cyclic voltammetry and galvanostatic charge–discharge. With the combined advantages of graphene and ionic liquid, the supercapacitor shows perfect performance. The supercapacitor possesses wide cell voltage and good stability. The specific capacitance, energy density, and specific power density of the present supercapacitor are 132 Fg⁻¹, 143.7 Wh kg⁻¹, and 2.8 kW kg⁻¹, respectively. The results demonstrate the potential application of electrical energy storage devices with high performance based on this new kind of supercapacitor.

     

LiMn2O4 hollow nanosphere electrode material with excellent cycling reversibility and rate capability

Lithium-rich Li_1.05Mn₂O₄ hollow nanospheres have been successfully prepared by air-calcining lithiated MnO₂ precursor at a low temperature of 550 °C, which was synthesized by chemical lithiation of hollow MnO₂ nanospheres with LiI at 70 °C for 12 h. The lithium-rich Li_1.05Mn₂O₄ hollow nanospheres exhibit an excellent cycling stability and rate capability as a cathode material for rechargeable lithium batteries: it maintains 90% of its initial capacity after 500 cycles, and keeps 70% of the reversible capacity at 0.1 C rat, even at 15 C rate.     

Self-assembled electrodes based on polyaniline grafted with reduced graphene oxide and polystyrene sulfonate

Journal of Solid State Electrochemistry - In this work, composites based on polyaniline (PAni) grafted with reduced graphene oxide (rGO) were obtained by the in situ chemical polymerization of...     

A Li-S battery with ultrahigh cycling stability and enhanced rate capability based on novel ZnO yolk-shell sulfur host

Currently,lithium-sulfur(Li-S)batteries still suffer from fast capacity decay,poor coulombic efficiency(CE)and short cycling lifespan,which result from the severe shuttle effect issue caused by high solubility and rapid diffusion of lithium polysulfides(Li PSs)in organic electrolytes.Here,yolk-shell zinc oxide(YSZn O)spheres are synthesized and for the first time,applied as a host for Li-S batteries to tackle this challenge.The polar Zn O exhibits high chemical anchoring ability toward Li PSs while the unique yolk-shell structure not only provides an additional physical barrier to Li PSs but also enables much more uniform sulfur distribution,thus significantly suppressing Li PSs shuttling effect meanwhile promoting sulfur conversion reactions.As a result,the YS-Zn O enables the Li-S battery to display an initial specific capacity of1355 m Ah g^-1 and an outstanding capacity retention capability(~89.44%retention rate)even after 500 cycles with the average CE of~99.46%at the current of 0.5 C.By contrast,the capacity of conventional-Zn O-nanoparticles based battery severely decays to 472 m Ah g^-1 after cycling for 500 times.More impressively,the S/YS-Zn O based Li-S battery can maintain a low decay rate of 0.040%every cycle and high average CE of 98.82%over 1000 cycles at 3 C.     

High-performance supercapacitor electrodes based on graphene hydrogels modified with 2-aminoanthraquinone moieties

2-Aminoanthraquinone (AAQ) molecules were covalently grafted onto chemically modified graphene (CMG), and the AAQ functionalized CMG sheets were self-assembled into macroporous hydrogels for supercapacitor electrodes. The electrode based on the AAQ modified self-assembled graphene hydrogel (AQSGH) showed a high specific capacitance of 258 F g(-1) at a discharge current density of 0.3 A g(-1), which is much larger than that of a pure graphene hydrogel (193 F g(-1)). Furthermore, the AQSGH electrode exhibited excellent rate capability and a long cycle life. This is mainly due to the covalently bonded AAQ moieties contributing additional redox capacitance. Furthermore, the highly conductive graphene hydrogel scaffold provided a large specific surface area for forming electric double layers and convenient routes for charge transfer and electrolyte diffusion.     

A novel hydrazine electrochemical sensor based on the high specific surface area graphene

An ultrasensitive platform is presented for the determination of hydrazine by combining the high specific surface area and higher electrical conductivity of poly(sodium styrenesulfonate) (PSS) graphene nanocomposite film with amperometric detection. The PSS-graphene were synthesized by the Hummers method and used to modify a glassy carbon electrode. The material was characterized by scanning electron microscopy and is found to be suitable for sensing hydrazine. The overpotential of hydrazine on the modified electrode is 0.31 V which is lower than in many electrochemical sensors. The calibration curve for hydrazine is linear in the range from 3.0 to 300 µmol L^?1, and the detection limit is as low as 1 µmol L^?1. This is the first report in which such a high sensitivity and low limit of detection has been achieved. It is concluded that PSS graphene represents an efficient electron mediator for sensing hydrazine.     

Realization and characterization of flexible supercapacitors based on doped graphene electrodes

Journal of Solid State Electrochemistry - High energy consumption leads to the development of various energy types. As a result, the storage of these different types of energy becomes a key issue....     

Bio-electrocatalysis of NADH and ethanol based on graphene sheets modified electrodes

Characterization and application of graphene sheets modified glassy carbon electrodes (graphene/GC) have been presented for the electrochemical bio-sensing. A probe molecule, potassium ferricyanide is employed to study the electrochemical response at the graphene/GC electrode, which shows better electron transfer than graphite modified (graphite/GC) and bare glassy carbon (GC) electrodes. Based on the highly enhanced electrochemical activity of NADH, alcohol dehydrogenase (ADH) is immobilized on the graphene modified electrode and displays a more desirable analytical performance in the detection of ethanol, compared with graphite/GC or GC based bio-electrodes. It also exhibits good performance of ethanol detection in the real samples. From the results of electrochemical investigation, graphene sheets with a favorable electrochemical activity could be an advanced carbon electrode materials for the design of electrochemical sensors and biosensors.     

Carbon monoxide adsorption on Pt/Pt electrodes modified with silver adatoms

Adsorption of carbon monoxide on the Pt/Pt surface in the presence of preliminarily accumulated different amounts of UPD silver (_Ag) is studied by using voltammetry, electrode washings, and analytical techniques. It is found that carbon monoxide is adsorbed only on the sites unoccupied by Ag_ad and rather than displacing the latter atoms to the noticeable extent. The fraction of carbon monoxide chemisorbed in the linear form increases with _Ag. The shape of anodic voltammetric curves and the number of peaks in the region where the mixed layer CO_ads + Ag_ad is desorbed strongly depend on the CO_ads : Ag_ad ratio; at small and medium _Ag, three and more peaks are observed. Electroanalytic detection of silver passed to solution in various potential ranges in the course of the mixed-layer oxidation allowed us to identify the processes corresponding to different peaks.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 241–246.Original Russian Text Copyright © 2005 by Maksimov, Podlovchenko.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.     

A flexible solid-state supercapacitor based on graphene/polyaniline paper electrodes

The direct coating of graphene sheets obtained by electrochemical exfoliation on commercial paper renders the preparation of highly conductive flexible paper substrate for subsequent deposition of polyaniline(PANi) nanorods via electrochemical polymerization. The deposition of PANi can be well-controlled by adjusting the electrochemical polymerization time, leading to the formation of PANi coated graphene paper(PANi-GP). The as-prepared electrode exhibited high areal capacitance of 176 mF cm~(-2) in threeelectrode system at a current density of 0.2 mA cm~(-2), which is around 10 times larger than that of pristine graphene paper due to the pseudocapacitive behavior of PANi. In-situ Raman test was used to determine the molecular changes during redox process of PANi. More importantly, all-solid-state symmetric capacitor assembled with two PANi-GP electrodes in a polymer electrolyte delivered an areal capacitance of 123 mF cm~(-2), corresponding to an areal energy density of 17.1 μWh cm~(-2) and an areal power density of 0.25 m W cm~(-2). The symmetric capacitor held a capacitive retention of 74.8% after 500 bending tests from 0 to 120°, suggesting the good flexibility and mechanical stability. These results showed the great promising application in flexible energy-storage devices.     

Gram-scale synthesis of nanomesh graphene with high surface area and its application in supercapacitor electrodes

Graphene that had nanomeshes, only one to two graphene layers, and specific surface areas of up to 1654 m(2) g(-1) was produced on gram-scale by template growth on porous MgO layers. Its unique porous structure gave excellent electrochemical capacitance (up to 255 F g(-1)), cycle stability and rate performance.     

High reversible capacity and rate capability of ZnCo2O4/graphene nanocomposite anode for high performance lithium ion batteries

A facile and straightforward method was adopted to synthesize ZnCo₂O₄/graphene nanocomposite anode. In the first step, pure ZnCo₂O₄ nanoparticles were synthesized using urea-assisted auto-combustion synthesis followed by annealing at a low temperature of 400 °C. In the second step, in order to synthesize ZnCo₂O₄/graphene nanocomposite, the obtained pure ZnCo₂O₄ nanoparticles were milled with 10 wt% reduced graphene nanosheets using high energy spex mill for 30 s. The ZnCo₂O₄ nanoparticles, with particle sizes of 25–50 nm, were uniformly dispersed and anchored on the reduced graphene nanosheets. Compared with pure ZnCo₂O₄ nanoparticles anode, significant improvements in the electrochemical performance of the nanocomposite anode were obtained. The resulting nanocomposite delivered a reversible capacity of 1124.8 mAh g⁻¹ at 0.1 C after 90 cycles with 98% Coulombic efficiency and high rate capability of 515.9 mAh g⁻¹ at 4.5 C, thus exhibiting one of the best lithium storage properties among the reported ZnCo₂O₄ anodes. The significant enhancement of the electrochemical performance of the nanocomposite anode could be credited to the strong synergy between ZnCo₂O₄ and graphene nanosheets, which maintain excellent electronic contact and accommodate the large volume changes during the lithiation/delithiation process.     

Electrodes with extremely high hydrogen overvoltages as substrate electrodes for stripping analysis based on bismuth-coated electrodes

Hydrogen evolution bothers stripping analysis significantly. Dioctyl phthalate-based carbon paste electrode exhibits extremely wide cathodic potential window. It is explored as a powerful substrate electrode to solve the problem of hydrogen evolution and further improve reproducibility for stripping analysis using bismuth-coated electrodes for the first time. It was successfully applied to the simultaneous determination of Zn²⁺, Cd²⁺, and Pb²⁺. Linear responses are obtained for Zn²⁺ in the range of 10–100 μg L⁻¹ and for Pb²⁺ and Cd²⁺ in the range of 5–100 μg L⁻¹. The detection limits for Zn²⁺, Cd²⁺, and Pb²⁺ are 0.1 μg L⁻¹, 0.22 μg L⁻¹ and 0.44 μg L⁻¹, respectively. The method has been successfully applied to the determination of Zn²⁺, Cd²⁺, and Pb²⁺ in waste water samples. The detection strategy based on the combination of dioctyl phthalate-based carbon paste electrode and bismuth-coated electrodes holds great promise for stripping analysis.     

A novel network composite cathode of LiFePO4/multiwalled carbon nanotubes with high rate capability for lithium ion batteries

A novel network composite cathode was prepared by mixing LiFePO₄ particles with multiwalled carbon nanotubes for high rate capability. LiFePO₄ particles were connected by multiwalled carbon nanotubes to form a three-dimensional network wiring. The web structure can improve electron transport and electrochemical activity effectively. The initial discharge capacity was improved to be 155 mA h/g at C/10 rate (0.05 mA/cm²) and 146 mA h/g at 1C rate. The comparative investigation on MWCNTs and acetylene black as a conducting additive in LiFePO₄ proved that MWCNTs addition was an effective way to increase rate capability and cycle efficiency.     

Sb-Cu alloy cathode with a novel lithiation mechanism of ternary intermetallic formation: Enabling high energy density and superior rate capability of liquid metal battery

Antimony(Sb) is an attractive cathode for liquid metal batteries(LMBs) because of its high theoretical voltage and low cost.The main obstacles associated with the Sb-based cathodes are unsatisfactory energy density and poor rate-capability.Herein,we propose a novel Sb₆₄Cu₃₆ cathode that effectively tackles these issues.The Sb₆₄Cu₃₆(melting point:525℃) cathode presents a novel lithiation mechanism involving sequentially the generation of Li₂C...     

A novel protein analytical method based on hybrid-aptamer and DNA-arrayed electrodes

A novel protein assay method based on a DNA array was developed, in which human immunoglobulin E (hIgE) and its DNA aptamer were used as an analytical model. The target protein hIgE was captured by the aptamer in homogeneous solution and then the resulting hIgE-aptamer complex was hybridized onto probes self-assembled on the DNA array. Measured by electrochemical impedance spectroscopy (EIS), the charge transfer resistance (Rct) of electrodes before and after hybridization was compared. To test the selectivity of the method, four different probes with one to three mismatched bases were immobilized on respective electrodes. The results showed that the complex could be hybridized and detected out on the electrodes modified with the fully complementary sequences. In addition, the DNA array could be employed to analyze multiple samples selectively with the matched aptamer.     

Facile fabrication of porous NiO films for lithium-ion batteries with high reversibility and rate capability

We report the high-rate capability and good cyclability of three-dimension nanoporous NiO films as the anodes of lithium-ion batteries. The NiO films are fabricated by immersing foam nickel substrates in an 80 °C aqueous solution containing ammonia and potassium peroxydisulfate, and subsequent heat treatment at 500 °C. At a rate of 1.0 C, the film electrodes maintain a capacity of 560 mAh g⁻¹ as well as capacity retention of 97% after 100 discharge/charge cycles. When the current density is increased to 14C, 42% of the capacity can be retained. Owing to the ease of large-scale fabrication and superior electrochemical performance, these NiO films will be promising anodes for high-energy-density lithium-ion batteries.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.