Silicon-carbon unsaturated compounds. 73. Photolysis of cis- and trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane in the presence of tert-butyl alcohol and acetone

Irradiation of cis-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1a) in the presence of tert-butyl alcohol in hexane with a low-pressure mercury lamp bearing a Vycor filter proceeded with high stereospecificity to give cis-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2a), in 33% isolated yield, together with a 15% yield of 1-[(tert-butoxy)methylphenylsilyl]-4-(methylphenylsilyl)butane (3). The photolysis of trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1b) with tert-butyl alcohol under the same conditions gave stereospecifically trans-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2b) in 41% isolated yield, along with a 12% yield of 3. Similar photolysis of 1a and 1b with tert-butyl alcohol-d₁ produced 2a and 2b, respectively, in addition to 1-[(tert-butoxy)(monodeuteriomethyl)(phenyl)silyl]-4-(methylphenylsilyl)butane. When 1a and 1b were photolyzed with acetone in a hexane solution, cis- and trans-2,3-benzo-1-isopropoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (4a and 4b) were obtained in 25% and 23% isolated yield. In both photolyses, 1-(hydroxymethylphenylsilyl)-4-(methylphenylsilyl)butane (5) was also isolated in 4% and 5% yield, respectively. The photolysis of 1a with acetone-d₆ under the same conditions gave 4a-d₆ and 5-d₁ in 18% and 4% yields.     

Chiral recognition and supramolecular photoreaction of 1,1′-binaphthol with bovine and human serum albumins

In their pioneering study in 1991, Levi-Minzi and Zandomeneghi discovered that photoirradiation of racemic 1,1′-binaphthol (rac-1) in the presence of bovine serum albumin (BSA) in distilled water gave (R)-1 in 99 % enantiomeric excess (ee) after 77 % of the starting material had been consumed. No similar attempt was made with human serum albumin (HSA). In this study of the effects of phosphate buffer solution on the ground-state affinity and excited-state photobehavior of 1 with serum albumin we found that both BSA and HSA preferentially bind the (S) enantiomer of 1 and that photoreaction of rac-1 mediated by BSA and HSA affords (R)-1 in 98 % ee with 99 % conversion and in 46 % ee with 65 % conversion, respectively.     

A novel potassium ion membrane sensor based on rifamycin neutral ionophore

A novel potentiometric membrane sensor for potassium ion based on the use of rifamycin as a neutral ionophore is described. The sensing membrane is formulated with 2 wt.% rifamycin-SV, 69 wt.% dibutylsebacate plasticizer and 29 wt.% PVC. Linear and stable potential response with near-Nernstian slope of 56.7 +/- 0.2 mV decade(-1) are obtained over the concentration range 1 x 10(-1)-3 x 10(-5) M K(+). The detection limit is 0.3 microg ml(-1) K(+), the response time is 10-30 s and the working pH range is 4-11. Responses of the sensor toward alkali and alkaline earth metal ions are in the order K(+) > Rb(+) > Cs(+) > Na(+) > NH(4)(+) > Ba(2+) > Mg(2+) > Ca(2+) > Sr(2+) > Li(+). The selectivity coefficient data reveal negligible interference from transition metal ions. Direct potentiometric determination of K(+) in the presence of 10-50-fold excess of alkali and alkaline earth metals gives results with an average recovery of 99.1%, and a mean standard deviation of 1.2%. The data agree fairly well with those obtained by flame photometry.     

Asymmetric synthesis of (1R,2S,3R)-3-methylcispentacin and (1S,2S,3R)-3-methyltranspentacin by kinetic resolution of tert-butyl (+/-)-3-methylcyclopentene-1-carboxylate

Conjugate addition of lithium dibenzylamide to tert-butyl (+/-)-3-methylcyclopentene-1-carboxylate occurs with high levels of stereocontrol, with preferential addition of lithium dibenzylamide to the face of the cyclic alpha,beta-unsaturated acceptor anti- to the 3-methyl substituent. High levels of enantiorecognition are observed between tert-butyl (+/-)-3-methylcyclopentene-1-carboxylate and an excess of lithium (+/-)-N-benzyl-N-alpha-methylbenzylamide (10 eq.) (E > 140) in their mutual kinetic resolution, while the kinetic resolution of tert-butyl (+/-)-3-methylcyclopentene-1-carboxylate with lithium (S)-N-benzyl-N-alpha-methylbenzylamide proceeds to give, at 51% conversion, tert-butyl (1R,2S,3R,alphaS)-3-methyl-2-N-benzyl-N-alpha-methylbenzylaminocyclopentane-1-carboxylate consistent with E > 130, and in 39% yield and 99 +/- 0.5% de after purification. Subsequent deprotection by hydrogenolysis and ester hydrolysis gives (1R,2S,3R)-3-methylcispentacin in > 98% de and 98 +/- 1% ee. Selective epimerisation of tert-butyl (1R,2S,3R,alphaS)-3-methyl-2-N-benzyl-N-alpha-methylbenzylaminocyclopentane-1-carboxylate by treatment with KO'Bu in 'BuOH gives tert-butyl (1S,2S,3R,alphaS)-3-methyl-2-N-benzyl-N-alpha-methylbenzylaminocyclopentane-1-carboxylate in quantitative yield and in > 98% de, with subsequent deprotection by hydrogenolysis and ester hydrolysis giving (1S,2S,3R)-3-methyltranspentacin hydrochloride in > 98% de and 97 +/- 1% ee.     

Reaction of azulene with 1,2-bis[4-(dimethylamino)phenyl]-1,2-ethanediol in a mixed solvent of methanol and acetonitrile in the presence of hydrochloric acid: a facile one-pot synthesis and properties of new triarylethylenes possessing an azulen-1-yl group

Reaction of azulene (1) with 1,2-bis[4-(dimethylamino)phenyl]-1,2-ethanediol (2) in a mixed solvent of methanol and acetonitrile in the presence of 36% hydrochloric acid at 60 °C for 3 h gives 2-(azulen-1-yl)-1,1-bis[4-(dimethylamino)phenyl]ethylene (3) (8% yield), 1-(azulen-1-yl)-(E)-1,2-bis[4-(dimethylamino)phenyl]ethylene (4) (28% yield), and 1,3-bis{2,2-bis[4-(dimethylamino)phenyl]ethenyl}azulene (5) (9% yield). Besides the above products, this reaction affords 1,1-di(azulen-1-yl)-2,2-bis[4-(dimethylamino)phenyl]ethane (6) (15% yield), a meso form (1R,2S)-1,2-di(azulen-1-yl)-1,2-bis[4-(dimethylamino)phenyl]ethane (7) (6% yield), and the two enantiomeric forms (1R,2R)- and (1S,2S)-1,2-di(azulen-1-yl)-1,2-bis[4-(dimethylamino)phenyl]ethanes (8) (6% yield). Furthermore, addition reaction of 3 with 1 under the same reaction conditions as the above provides 6, in 46% yield, which upon oxidation with DDQ (=2,3-dichloro-5,6-dicyano-1,4-benzoquinone) in dichloromethane at 25 °C for 24 h yields 1,1-di(azulen-1-yl)-2,2-bis[4-(dimethylamino)phenyl]ethylene (9) in 48% yield. Interestingly, reaction of 1,1-bis[4-(dimethylamino)phenyl]-2-(3-guaiazulenyl)ethylene (11) with 1 in a mixed solvent of methanol and acetonitrile in the presence of 36% hydrochloric acid at 60 °C for 3 h gives guaiazulene (10) and 3, owing to the replacement of a guaiazulen-3-yl group by an azulen-1-yl group, in 91 and 46% yields together with 5 (19% yield) and 6 (13% yield). Similarly, reactions of 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (12) and 1,1-bis{4-[2-(dimethylamino)ethoxy]phenyl}-2-(3-guaiazulenyl)ethylene (13) with 1 under the same reaction conditions as the above provide 10, 2-(azulen-1-yl)-1,1-bis(4-methoxyphenyl)ethylene (16), and 1,3-bis[2,2-bis(4-methoxyphenyl)ethenyl]azulene (17) (93, 34, and 19% yields) from 12 and 10 and 2-(azulen-1-yl)-1,1-bis{4-[2-(dimethylamino)ethoxy]phenyl}ethylene (18) (97 and 58% yields) from 13.     

Reactions of azulenes with 1,2-diaryl-1,2-ethanediols in methanol in the presence of hydrochloric acid: comparative studies on products, crystal structures, and spectroscopic and electrochemical properties

Although reaction of guaiazulene (1a) with 1,2-diphenyl-1,2-ethanediol (2a) in methanol in the presence of hydrochloric acid at 60 °C for 3 h under aerobic conditions gives no product, reaction of 1a with 1,2-bis(4-methoxyphenyl)-1,2-ethanediol (2b) under the same reaction conditions as 2a gives a new ethylene derivative, 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (3), in 97% yield. Similarly, reaction of methyl azulene-1-carboxylate (1b) with 2b under the same reaction conditions as 1a gives no product; however, reactions of 1-chloroazulene (1c) and the parent azulene (1d) with 2b under the same reaction conditions as 1a give 2-[3-(1-chloroazulenyl)]-1,1-bis(4-methoxyphenyl)ethylene (4) (81% yield) and 2-azulenyl-1,1-bis(4-methoxyphenyl)ethylene (5) (15% yield), respectively. Along with the above reactions, reactions of 1a with 1,2-bis(4-hydroxyphenyl)-1,2-ethanediol (2c) and 1-[4-(dimethylamino)phenyl]-2-phenyl-1,2-ethanediol (2d) under the same reaction conditions as 2b give 2-(3-guaiazulenyl)-1,1-bis(4-hydroxyphenyl)ethylene (6) (73% yield) and (Z)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1-phenylethylene (7) (17% yield), respectively. Comparative studies of the above reaction products and their yields, crystal structures, spectroscopic and electrochemical properties are reported and, further, a plausible reaction pathway for the formation of the products 3-7 is described.     

An efficient enzymatic synthesis of benzocispentacin and its new six- and seven-membered homologues

A very efficient enzymatic method was developed for the synthesis of new enantiomeric benzocispentacin and its six- and seven-membered homologues through the Lipolase (lipase B from Candida antarctica) catalyzed enantioselective (E > 200) ring opening of 3,4-benzo-6-azabicyclo[3.2.0]heptan-7-one, 4,5-benzo-7-azabicyclo[4.2.0]octan-8-one, and 5,6-benzo-8-azabicyclo[5.2.0]nonan-9-one with H2O in iPr2O at 60 degrees C. The (1R,2R)-beta-amino acids (ee > or = 96%, yields > or = 40%) and (1S,6S)-, (1S,7S)-, and (1S,8S)-beta-lactams (ee > 99%, yields > or = 44%) produced could be easily separated. The ring opening of racemic and enantiomeric beta-lactams with 18% HCl afforded the corresponding beta-amino acid hydrochlorides.     

A thorough study on the reaction of DMAD with 1-arylaminoimidazole-2-thiones. Expeditious synthesis of imidazo[2,1-b][1,3]thiazoles through a novel arylamino rearrangement

Upon reaction of 1-arylamino-imidazole-2-thiones 1 with dimethyl acetylenedicarboxylate (DMAD) in the presence of 2.2 equiv of sodium hydride, imidazothiazoles 4 were exclusively formed (71-82% yield). However, from the reaction of 1 with DMAD in the absence of base, only the S-substituted products 5 were formed as an E/Z mixture (53-55%), which could also be converted to 4 with 2.0 equiv of sodium hydride (65-68%). Furthermore, 5a-E/Z was converted to arylamino-substituted derivatives 8a upon reaction with 1.1 equiv of sodium hydride in 78% yield. Formation of 8a (75% yield) was also possible by reaction of thione 1a with DMAD in the presence of sodium methoxide in methanol. Substitution on the imidazole 3-NH of thione 1a leading to 6a-Z was observed either by heating 1a with DMAD (91%) or by heating the 5a-E/Z mixture in benzene (90% yield). Finally, when 5a-E reacted with acetic anhydride the acetylated derivative 7a-Z was the only isolated product (58%). Full assignment of all ¹H and ¹³C NMR chemical shifts has been unambiguously achieved.     

Synthesis of indenes by ytterbium-catalyzed carboalkoxylation/Friedel-Crafts reaction of arylidenecyclopropanes with acetals

Ytterbium-catalyzed tandem carboalkoxylation/Friedel-Crafts reaction of arylidenecyclopropanes 1 with acetals 2 afforded the corresponding indene derivatives 3 in good to high yields. For example, in the presence of 10 mol % of Yb(OTf)₃ the reaction of 1-phenylbenzylidenecyclopropane 1a with the dimethyl acetals of benzaldehyde 2a, p-tolualdehyde 2b, and p-anisaldehyde 2c gave 1,3-diphenyl-2-(2-methoxyethyl)indene 3a, 2-(2-methoxyethyl)-3-phenyl-1-(p-tolyl)indene 3b, and 1-(p-anisyl)-2-(2-methoxyethyl)-3-phenylindene 3c in 82%, 80%, and 80% yields, respectively.     

Convenient synthesis of antisepsis agent TAK-242 by novel optical resolution through diastereomeric N-acylated sulfonamide derivative

A convenient synthesis method of antisepsis agent TAK-242 ((R)-1) through diastereomeric resolution was developed. By condensation of racemate rac-1 with chiral acid (S)-O-acetylmanderic acid (6a), the desired diastereomer 5a was isolated with 98% de in 39% yield by simple crystallization. Deacylation of 5a with aq NaOH followed by recrystallization provided (R)-1 with 99% ee in 20% yield from rac-1.     

A short-cut from 1-acetyl adamantane to 2-(1-adamantyl)pyrroles

The oxime of 1-acetyl adamantane 2 is added to acetylene (KOH/DMSO, 70 °C, initial acetylene pressure 13 atm, 30 min) to afford the corresponding O-vinyl oxime 5 in 80% yield. The latter upon heating (DMSO, 120 °C, 1 h) gives 2-(1-adamantyl)pyrrole 3, 1-acetyl adamantane 1, and adamantane (6:3:1 mass ratio), the yield of the pyrrole 3 being 83% (based on 1-acetyl adamantane 1 consumed). Under harsher conditions (NaOH/DMSO, 130 °C, atmospheric pressure of acetylene, 4 h) oxime 2 reacts with acetylene to furnish pyrrole 3, 1-acetyl adamantane 1, 1-vinyl adamantane 9, and adamantane (6:7:3:1 mass ratio), with the isolated yield of pyrrole 3 reaching 34%. Under pressure (NaOH/DMSO, 120 °C, initial acetylene pressure 14 atm, 1 h) the same reaction leads to 2-(1-adamantyl)-1-vinylpyrrole 4 and ketone 1 in 48% (based on consumed ketone 1) and 24% yields, respectively. The pyrrole 4 is easily deprotected to the corresponding 1H-pyrrole 3 in 77% yield by treatment (aqueous MeCN) with Hg(OAc)₂ and NaBH₄.     

Synthesis of certain 1,7,7-trimethyl-bicyclo[2.2.1]heptane derivatives with anticonvulsant, hypoglycemic and anti-inflammatory potential

Starting from (1,7,7-trimethyl-bicyclo[2.2.1]hept-2-ylideneamino)-acetic acid methyl esters 6a, 6b, the aryl esters of exo-2-[methyl-(1,7,7-trimethyl-bicyclo[2.2.1]hept-2-yl)-amino]-ethanol (10a-f) and exo-2-[methyl-(1,7,7-trimethyl-bicyclo[2.2.1]hept-2-yl)-amino-2-phenyl-ethanol (10g-n) are prepared. Also, from the reaction of 1,7,7-trimethyl-bicyclo[2.2.1]heptan nitramine 4 with either 2-amino-1-(4-nitrophenyl)-propane-1,3-diol (17) or 1-aminomethyl-cyclohexanol (18), the alcohol exo-1-[(1,7,7-trimethyl-bicylo[2.2.1]hept-2-ylamino)-methyl]-cyclohexanol (13), exo-1-(4-aminophenyl)-2-(1,7,7-trimethyl-bicyclo[2.2.1]hept-2-ylamino)-propane-1,3-diol (14) and 1-(4-aminophenyl)-2-[methyl-1,7,7-trimethylbicyclo[2.2.1]hept-2-yl]-amino]-propane-1,3-diol (16) are synthesized. At a dose level of 12.5 mg/kg, compounds 16 and 14 show a significant anticonvulsant protection against pentylenetetrazole seizures (100% and 83% protection, respectively) compared with diphenylhydantoin sodium (50 mg/kg, 100%) and deramciclane fumarate (25 mg/kg, 83%), used as reference drugs. Compound 10b at dose level of 50 mg/kg displayed 41%, hypoglycemic activity, compared with gliclazide (10 mg/kg, 23%) as reference drug. Furthermore, the prepared compounds are screened for their anti-inflammatory potential at a dose level of 50 mg/kg. Compounds 10i, 10g, 14 and 10m exhibited 92%, 90%, 88% and 80% inhibition in rat paw weight, respectively, with no sign of ulcerogenicity, compared with indomethecin (5 mg/kg, 81%).     

A convenient synthesis of 1′-H-spiro-(indoline-3,4′-piperidine) and its derivatives

A simple synthetic route has been developed to prepare 1′-H-spiro(indoline-3,4′-piperidine) (1d). Dialkylation of 2-fluorophenylacetonitrile with N-(tert-butyloxycarbonyl)-bis(2-chloroethyl)amine (5) gave 6. Deprotection of Boc followed by cyclization resulted 1d in 67% overall yield. Selective Boc or Cbz protection of 1′-N gave 1a or 1b with 90 and 85% yield, respectively. Thus, in a five-step procedure, 1a and 1b were synthesized from commercially available reagents in over 50% overall yield. All 3 compounds (1a, 1b and 1d) can be utilized as templates to synthesize compounds for GPCR targets.     

Synthesis of Spiro and Fused Five Membered N-Heterocycles from Alkylidenephosphoranes

Triketoindan-2-oxime reacted readily with ethoxycarbonylmethylene triphenylphosphorane to give mainly the corresponding spiro-pyrrole (38%) along with the fused 1-hydroxydihydropyrrole (14%), whereas the spiro-dimer (29%) was obtained from the reaction of the oxime with methoxycarbonylmethylenetriphenyl phosphorane in addition to the corresponding 1-hydroxydihydropyrrole (31%). Conversely, Wittig products, mono-olefin (52%) and diolefin (<7%) along with the reduced substrate (10%), were observed when the oxime was treated with a cyano ylide. The reactions of the oxime with allyl- and vinyl phosphonium salts proceeded under phase-transfer catalysis to afford fused oxazole (46%) and spiro[2]oxazole (17%), while with the latter the fused 1-hydroxypyrrole (55%) was produced.     

Low-temperature enzymatic hydrolysis resolution in mini-emulsion media

A low-temperature mini-emulsion medium for the enzymatic resolution of 1-phenylethanol is described for the first time. The enzymatic hydrolysis resolution of 1-phenylethyl esters with different chain-lengths in the presence of Candida antarctica lipase B in mini-emulsion media was shown to be significantly controlled by temperature. In this system, the direct effect of temperature on the mini-emulsion size was observed. For the longer 1-phenylethyl ester, 1-phenylethyl dodecanoate, the enzymatic resolution was promoted exclusively at low temperatures. The preparative mini-emulsion enzymatic reaction of 1-phenylethyl dodecanoate at 4 °C afforded the isolation of (R)-phenylethanol with a yield of 36 % with an ee of 99 %. (S)-Phenylethanol was isolated with a 51 % yield with an ee of 79 %.     

Preparation of Optically Enriched Secondary Alkyllithium and Alkylcopper Reagents—Synthesis of (−)‐Lardolure and Siphonarienal

Optically enriched secondary alkyl iodides were converted into secondary alkyllithium and secondary alkylcopper compounds with very high retention of configuration. Quenching with various electrophiles, including chiral epoxides, provided a range of chiral molecules with high enantiomeric purity (>90 % ee). This method has been applied in an iterative fashion in the total synthesis of (?)‐lardolure in 13 steps and 5.4 % overall yield (>99 % ee, dr>99:1) and siphonarienal in 15 steps and 5.6 % overall yield (>99 % ee, dr>99:1) starting from commercially available ethyl (R)‐3‐hydroxybutyrate (>99 % ee).     

Self-disproportionation of enantiomers of heterocyclic compounds having a tertiary trifluoromethyl alcohol center on chromatography with a non-chiral system

Self-disproportionation of enantiomers of heterocycles having a tertiary trifluoromethyl alcohol center on an achiral silica-gel stationary phase is discussed. During the chromatographic separation of an enantiomerically enriched mixture of 1-(3,4-dimethoxyphenethyl)-3-hydroxy-3-(trifluoromethyl)-6,7-dihydro-1H-indole-2,4(3H,5H)-dione (1) by eluting with ether on a non-chiral regular silica-gel significant enantiomeric enrichment was observed. Separation of non-racemic samples of 1 with enantiomeric excess values of 10-54% was carefully investigated: enantiomerically pure 1 with 99.9% ee was obtained by the use of 1 with at least 40% ee. A remarkable enantiomeric enrichment in the faster eluting fractions was also observed for compound 1 with only 30% ee to transform into 80% ee. Other enantiomeric mixtures of heterocyclic molecules containing a trifluoromethyl alcohol moiety at their quaternary carbon center were also examined from an SDE view point.     

Novel synthesis of 1-aryl-1-trifluoromethylallenes

3,3-Bis(phenylthio)-1,1,1,2,2-pentafluorobutane 1 was reacted with aryllithium reagents (6 equiv) in ether at low to room temperature for 1-6 h to provide 2-aryl-1,1,1-trifluoro-3-phenylthio-2-butene 2 in 80-96% yields. Bromination of 2 with NBS in acetonitrile at reflux for 1-7 h afforded the corresponding allylic bromides 3 in 61-96% yields. Treatment of 3 with MCPBA (1.5 equiv) in methylene chloride at reflux temperature for 1-12 h resulted in the formation of 1-aryl-1-trifluoromethylallenes 4 in 74-96% yields.     

Isolation of secondary metabolites from Hortia oreadica (Rutaceae) leaves through high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) with a two-phase solvent system (hexane–ethanol–acetonitrile–water 10:8:1:1, v/v) was applied to examine the leaves of Hortia oreadica, which afforded the known limonoid guyanin (1), the alkaloids rutaecarpin (2) and dictamnine (6), the dihydrocinnamic acid derivatives methyl 5,7-dimethoxy-2,2-dimethyl-2H-1-benzopyran-6-propanoate (3), 5,8-dimethoxy-2,2-dimethyl-2H-1-benzopyran-6-propanoic acid (4), together with the new E-3,4-dimethoxy-α(3-hydroxy-4-carbomethoxyphenyl)cinnamic acid (5). The recovery of compounds 1–6 was determined by comparison with LC-atmospheric pressure chemical ionization MS/MS data: 66.2%, 93.1%, 102.5%, 101.2%, 99.0% and 84.9%, respectively. Compound 3 showed IC₅₀ of 23.6 μM against Plasmodium falciparum and 15.6 μM against Trypanosoma brucei rhodesienses and was not toxic to KB cells (IC₅₀ > 100 μM).     

Hexabromide salt of a tiny octaazacryptand as a receptor for encapsulation of lower homolog halides: structural evidence on halide selectivity inside the tiny cage

Tiny azacryptand 1,4,7,10,13,16,21,24-octaazabicyclo[8.8.8]hexacosane (L) upon reaction with 48% hydrobromic acid (containing <0.05% chloride contamination) forms hexabromide salt (1). Single crystal X-ray crystallographic investigation of the hexaprotonated bromide (1) shows no guest encapsulation inside the tiny cage. This bromide salt 1 with an empty proton cage has been utilized as the receptor for encapsulation of chloride (2) and fluoride (3). Crystallographic results of mixed chloride/bromide (2) and fluoride/bromide (3) complexes of L are examined, which show monotopic recognition of chloride in the case of 2 and fluoride in the case of 3 inside the proton cage with five bromide and three water molecules outside the cavity. Single crystals obtained from an experiment on mixed anionic system (chloride and fluoride), 1 shows selective encapsulation of fluoride, which supports the formation of complex 3 and crystals obtained upon treatment of 2 with tetrabutyl ammonium fluoride also yields complex 3. In a separate reaction between L and 49% hydrobromic acid containing higher chloride contamination (<0.2%) forms chloride/bromide salt (2). ¹H NMR studies of 1 with sodium chloride and fluoride support the encapsulation of the respective anions inside the proton cage.