Experimental investigation on electro-mechanically coupled cyclic deformation of laterally constrained dielectric elastomer

A series of electro-mechanically coupled cyclic tests at large deformation are carried out to characterize the cyclic deformation of a laterally constrained dielectric elastomer (DE) in this work. In the strain-controlled cyclic tests of the dielectric elastomer (e.g., VHB 4910 DE) with a constant or cyclic voltage, cyclic stress softening occurs and is influenced by the phase-angle difference between the applied cyclic strain and cyclic voltage. In the stress-controlled cyclic tests of VHB 4910 DE with a constant or cyclic voltage, ratchetting (a cyclic accumulation of inelastic strain) takes place; the ratchetting strain is considerably enhanced by applying higher voltage level, higher stress level and lower stress rate, and is also affected by the phase-angle difference between the applied cyclic stress and cyclic voltage. Moreover, the remarkable recovery of residual strain after the cyclic tests demonstrates that the cyclic stress softening and ratchetting of VHB 4910 DE mainly stem from the viscoelasticity. The comprehensive experimental observations are very useful to develop, calibrate and validate an electro-mechanically coupled constitutive model of dielectric elastomers.     

Universal cyclic polymer templates

Two unique molecular templates for generating polymeric materials with a cyclic molecular architecture were developed by combining ring-expansion metathesis polymerization and click chemistry. These two universal cyclic polymers were used in three examples to demonstrate the wide range of potential materials enabled. They include functional cyclic polymers, cyclic polymer brushes, and cyclic gels.     

Reactions of 1-Hydro-5-carbaphosphatrane: Tautomerization between Five-Coordinate and Three-Coordinate Species

Oxidation, sulfurization, and selenation of a 1-hydro-5-carbaphosphatrane afforded the corresponding cyclic phosphonate, cyclic phosphonothioate, and cyclic phosphonoselenoate, respectively. These results indicate the existence of the tautomerization between the five-coordinate 5-carbaphosphatrane and the three-coordinate cyclic phosphonite.     

Cyclic edge-cuts in fullerene graphs

In this paper, we study cyclic edge-cuts in fullerene graphs. First, we show that the cyclic edge-cuts of a fullerene graph can be constructed from its trivial cyclic 5- and 6-edge-cuts using three basic operations. This result immediatelly implies the fact that fullerene graphs are cyclically 5-edge-connected. Next, we characterize a class of nanotubes as the only fullerene graphs with non-trivial cyclic 5-edge-cuts. A similar result is also given for cyclic 6-edge-cuts of fullerene graphs.     

Polymerization chemistry of the family of cyclic imino ethers

Characteristics of the polymerization mechanisms of the family of cyclic imino ethers are described. The variety of the mechanism of propagation has been systematized on the basis of the nature of propagating species, i.e., cationic or electrophilic covalent (dipole) species. In the polymerizations of 2-alkyl cyclic imino ethers (5- and 6-membered), propagation mechanism via one of these two different species has been established, which is dependent upon the relative nucleophilic reactivities of the monomer and the counter anion derived from initiator. The polymerization of cyclic pseudoureas having a cyclic amine substituent at 2-position proceeds in two different ways. Ionic propagation leads to the single isomerization/ring-opening polymerization involving only the cyclic imino ether ring. On the other hand, covalent propagation gives rise to the double isomerization ring-opening polymerization involving the two rings of cyclic imino ether and cyclic amine. Polymerization of 5-membered cyclic iminocarbonate with a sulfonate initiator proceeds through the isomerization/ring-opening of 2-oxazoline ring. The same monomer was isomerized to the corresponding cyclic urethane when it was treated with benzyl bromide.     

芳香环状低聚物组分分布与单体结构关系的研究

根据Jacoson-Stockmayer(J-S)环化理论,应用基质辅助激光解吸离子化飞行时间质谱(MAIDL-TOFMS),对一系列芳香环状低聚物组分分布进行分析,研究了芳香环状低聚物的组分分布与单体结构的关系,结果表明,在芳香聚酯、聚膦酸酯及芳香聚醚环状低聚物系列中,Incn与Inn呈良好的线性关系,符合J-S理论分布,在环状聚酯及聚膦酸酯系列中,低聚物的组分分布受双酚单体的中心键角影响,单体的中心键角在100°～120°之间,其中心键角愈小,γ值愈大,而在聚醚系列中,在固定一种单体的前提下,环化物的组分分布受另一单体键角的影响与环状聚酯和聚膦酸酯相一致.     

Cyclic 7-edge-cuts in fullerene graphs

A fullerene graph is a planar cubic graph whose all faces are pentagonal and hexagonal. The structure of cyclic edge-cuts of fullerene graphs of sizes at most 6 is known. In the paper we study cyclic 7-edge connectivity of fullerene graphs, distinguishing between degenerate and non-degenerate cyclic edge-cuts, regarding the arrangement of the 12 pentagons. We prove that if there exists a non-degenerate cyclic 7-edge-cut in a fullerene graph, then the graph is a nanotube unless it is one of the two exceptions presented. We determined that there are 57 configurations of degenerate cyclic 7-edge-cuts, and we listed all of them.     

Effects of sodium salicylate on the febrile response and increased levels of cyclic AMP in cerebrospinal fluid during endogenous pyrogen-induced fever in rabbits

To further evaluate the causality between endogenous pyrogen (EP)-induced fever and cyclic adenosine-3',5'-monophosphate (cyclic AMP) level, the effects of sodium salicylate (SS) on the febrile response and increased levels of cyclic AMP in both cerebrospinal fluid (c.s.f.) and plasma during EP-induced fever in rabbits were observed. The results suggest that cyclic AMP is probably involved in the central mediation of EP-induced fever and that increased concentration of cyclic AMP in c.s.f. associated with EP-induced fever is not the result of temperature elevation but appears to be caused by the increased synthesis in the central nervous system. In addition it is confirmed that blood is impossibly a contributory source of increased cyclic AMP in c.s.f. during EP fever, and that SS may act subsequent to the increase in cyclic AMP.     

Promoter-Controlled Synthesis and Conformational Analysis of Cyclic Mannosides up to a 32-mer

Cyclodextrins are widely used as carriers of small molecules for drug delivery owing to their remarkable host properties and excellent biocompatibility. However, cyclic oligosaccharides with different sizes and shapes are limited. Cycloglycosylation of ultra-large bifunctional saccharide precursors is challenging due to the constrained conformational spaces. Herein we report a promoter-controlled cycloglycosylation approach for the synthesis of cyclic α-(1→6)-linked mannosides up to a 32-mer. Cycloglycosylation of the bifunctional thioglycosides and (Z)-ynenoates was found to be highly dependent on the promoters. In particular, a sufficient amount of a gold(I) complex played a key role in the proper preorganization of the ultra-large cyclic transition state, providing a cyclic 32-mer polymannoside, which represents the largest synthetic cyclic polysaccharide to date. NMR experiments and a computational study revealed that the cyclic 2-mer, 4-mer, 8-mer, 16-mer, and 32-mer mannosides adopted different conformational states and shapes.     

Cyclic polysiloxanes

The preparation, fractionation and characterisation of synthetic cyclic polysiloxanes (R(CH₃)SiO)_x are reviewed. Particular emphasis is given to the cyclic poly(dimethylsiloxanes) (PDMS) (R is CH₃) cyclic poly(phenylmethylsiloxanes)(PPMS) (R is C₆H₅) and cyclic poly(vinylmethylsiloxanes) (PVMS) (R is CH₂=CH). The application of high performance liquid chromatography (HPLC) and analytical and preparative gel permeation chromatography (GPC) to the preparation and characterisation of cyclic polysiloxanes is discussed. The methods include preparation of sharp fractions of relatively high molar mass cyclic polymers (with heterogeneity indices typically ca. 1.05) and comparison of the GPC and retention volumes of cyclics with the corresponding linear polymers. Investigations of the cyclic polymers prepared have been made using a number of experimental methods and techniques. These include dilute solution viscometry and low angle neutron scattering. Comparisons are drawn between cyclic PDMS and other cyclic polysiloxanes and also between cyclic polysiloxanes and the corresponding commercially-important linear polymers.     

Lipase-catalyzed ring-opening polymerization of molecularly pure cyclic oligomers for use in synthesis and chemical recycling of aliphatic polyesters

The lipase-catalyzed ROP of molecularly pure cyclic oligomers with a definite degree of oligomerization is analyzed with respect to the molecular weights of the resulting polymers and certain kinetic parameters of the enzymatic reaction. Cyclic BA dimers, trimers, and tetramers polymerize faster than the equivalent monomer; however, the latter produces PBA of significantly higher molecular weight. The reason is that the ring opening of the cyclic monomer is slow, leading to a lower initiator concentration than that produced by the cyclic BA dimer and trimer. Similarly, the cyclic BS dimer produces PBS of higher molecular weight than that obtained from the cyclic BS trimer.     

Cyclic allene intermediates in intramolecular dehydro Diels-Alder reactions: labeling and theoretical cycloaromatization studies

A comprehensive theoretical and experimental investigation of dehydro Diels-Alder reactions examining the evolution of the cyclic allene intermediates under conditions for intramolecular and ionic and radical intermolecular cycloaromatization processes is reported. Theoretical calculations showed that the most favored intramolecular path for cycloaromatization of 1,2,4-cyclohexatriene 4 and its benzoannulated derivative 14, strained cyclic allenes, consists of a pair of successive [1,2] H shifts rather than a [1,5] shift. Cycloaromatization of cyclic allenes may follow both inter- and intramolecular pathways, depending on the experimental conditions (use of protic or aprotic solvents). For synthetic purposes, the best procedure is to use a protic solvent to promote the ionic intermolecular route, the fastest and highest yielding. When the reaction is carried out in CCl4, intermolecular radical addition of chlorine to the cyclic allene competes with intramolecular aromatization paths. Theoretical calculations predict a low barrier for the reaction of cyclic allenes with carbon tetrachloride, and that the cyclic allenes act as nucleophiles in this reaction.     

THE EFFECT OF ULTRAVIOLET LIGHT ON THE CYCLIC NUCLEOTIDE SYSTEM OF HUMAN FIBROBLASTS

Abstract— The concentrations of cyclic AMP and cyclic GMP in human skin fibroblasts in culture were determined after exposing the cells to varying fluences of UV (254 nm) light. The cyclic nucleotide concentrations of cells irradiated in the log phase of growth were unchanged relative to controls. In contrast, there was a rise in the concentration of cyclic AMP in cells irradiated after they reached confluency. The increase in concentration was observed as early as 30 min after irradiation, reached a maximum of about 200% of control at 4 to 6 h after exposure, and returned to control values by 24 h after irradiation. The effect was proportional to a UV fluence from 5 to 20 J/m², and was blocked by the addition of the UV absorbing agent para-aminobenzoic acid. In contrast, our results indicated that UV light had no effect on the concentration of cyclic GMP in human fibroblast cell cultures. Because of the importance of cyclic nucleotides in the regulation of cellular function, it is reasonable to hypothesize that changes in cyclic AMP induced by UV light may affect the extranuclear functions of irradiated cells.     

Synthesis of biaryl-linked cyclic peptoids

Peptoids, a class of peptidomimetic, have gained considerable attention as potential therapeutic agents due to properties such as biocompatibility and resistance to enzymatic degradation. In linear peptoids, conformational heterogeneity can arise due to cis/trans isomerization around the backbone tertiary amide bond which has led to an increasing interest in cyclic peptoids. Biaryl linkages appear as a common structural motif in many synthetic and naturally occurring cyclic peptides but they are yet to be utilized in the formation of cyclic peptoids. Herein, we describe the application of a solid-phase Suzuki cross-coupling strategy as a means to prepare of a series of biaryl-linked cyclic peptoids. The methodology presented allows access to a range of novel biaryl containing cyclic peptoids with varying ring sizes.     

Cyclic alkoxyamines for nitroxide‐mediated radical polymerization

A 5‐membered cyclic alkoxyamine and a 17‐membered cyclic alkoxyamine were synthesized and used in the polymerization of styrene. Polymerizations using the 5‐membered cyclic alkoxyamine resulted in polymers with uncontrolled molecular weights and high polydispersities. Polymerizations using the 17‐membered cyclic alkoxyamine produced oligomeric polymers in which multiple polymer chains are linked through NO‐C bonds. EPR homolysis experiments revealed that the 5‐membered cyclic alkoxyamine does not dissociate to form a nitroxide species, even at temperatures as high as 403 K. In contrast, the 17‐membered cyclic alkoxyamine does dissociate to form nitroxide, but the rate of dissociation is slower than that of parent acyclic alkoxyamine 2,2,5‐trimethyl‐3‐(1‐phenylethoxy)‐4‐phenyl‐3‐azahexane. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8049–8069, 2008     

肉桂腈电化学还原反应机理

采用循环伏安法研究了肉桂腈在乙腈溶液中的电还原行为,其在-1.46和-2.0V处各存在一个还原峰.第一个峰处恒电位电解得到了线性、环化氢化二聚产物以及苯基戊二腈;第二个峰处电解得到了饱和二氢还原产物苯丙腈.结合循环伏安模拟判定了整个电还原的具体反应机理是肉桂腈通过电化学-电化学-化学-化学(EECC)反应机理生成苯丙腈,同时经历自由基-自由基(RR)过程得到线性和环化二聚产物,肉桂腈还可以与乙腈的共轭碱反应得到苯基戊二腈.最终通过循环伏安模拟求得相应反应的动力学常数,自由基-自由基耦合反应速率常数为104L·mol-.1s-1,第二个电子转移反应速率常数为0.3cm.s-1,其后质子化反应的速率常数为105s-1.     

Fragmentation and sequencing of cyclic peptides by matrix-assisted laser desorption/ionization post-source decay mass spectrometry.

A series of synthetic cyclic decapeptides and other smaller cyclic peptides were analyzed using matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. The investigated compounds were cyclized in a head-to-tail manner and contained non-proteinaceous amino acids, such as D-phenylalanine, D,L-4-carboxyphenylalanine, epsilon-aminocaproic acid, and gamma-aminobutyric acid, and were synthesized in a program to develop inhibitors of pp60(c-src) (Src), a tyrosine kinase that is involved in signal transduction and growth regulation. Post-source decay (PSD) spectra of the cyclic peptides featured abundant sequence ions. Two preferential ring opening reactions were detected resulting in linear fragment ions with an N-terminus of proline and a C-terminus of glutamic acid, respectively. MALDI-PSD spectra even permitted de novo sequencing of some cyclic peptides. Systematic studies on cyclic peptides using this method of fragmentation have not been reported to date. This work presents an easy mass spectrometric method, MALDI-PSD, for the characterization and identification of cyclic peptides.     

Determination of cyclic structure for polydithiane using electrospray ionization mass spectrometry

Disulfide polymers obtained by ring‐opening polymerization have been considered to have a possibility of a cyclic catenane structure as judged from their test properties on the loss modulus and stress–strain. Electrospray ionization mass spectrometry (ESI‐MS) was used to detemine molecular structure of polydithiane and polyoxyethylene to find whether they are present as a cyclic or as a linear structure. The results indicated that the polydithiane possesses the cyclic structure, and analysis of the isotope distribution of the spectral ions further showed that the polymer consists entirely of the cyclic structure without contamination of a linear polymer. A linear chain polymer with a benzylmercaptan end group was synthesized, and the ESI‐MS analysis revealed that the polymer was a mixture of both the cyclic and the linear polymer. The cyclic polymer is probably formed by back‐biting of the highly reactive sulfur radicals that had been formed during the polymerization reaction. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4403–4406, 2000     

Cyclic phosphonium ylides

Synthetic approaches to cyclic phosphonium ylides are reviewed and the syntheses are classified according to reaction type rather than ring size. Particular attention is paid to syntheses leading to isolable or easily characterizable cyclic ylides and a number of other reactions in which cyclic phosphonium ylides are postulated as transient intermediates are discussed. There is also a brief discussion regarding structure and bonding in certain of the more stable cyclic ylides such as the 1,1-disubslituted phosphorins and certain diphosph(V)orins.