A New Predictive Equation for the Surface Tensions of Aqueous Mixed Ionic Solutions Conforming to the Linear Isopiestic Relation

The linear isopiestic relation has been used, together with the fundamental Butler equations, to establish a new simple predictive equation for the surface tensions of the mixed ionic solutions. This newly proposed equation can provide the surface tensions of multicomponent solutions using only the data of the corresponding binary subsystems of equal water activity. No binary interaction parameters are required. The predictive capability of the equation has been tested by comparing with the experimental data of the surface tensions for the systems HCl–LiCl–H₂O, HCl–NaClO₄–H₂O, HCl–CaCl₂–H₂O, HCl–SrCl₂–H₂O, HCl–BaCl₂–H₂O, LiCl–NaCl–H₂O, LiCl–KCl–H₂O, NaCl–KCl–H₂O, KNO₃–NH₄NO₃–H₂O, and LiCl–NaCl–KCl–H₂O at 298.15 K; KNO₃–NH₄Cl–H₂O, KBr–Sr(NO₃)₂–H₂O, NaNO₃–Sr(NO₃)₂–H₂O, NaNO₃ –(NH₄)₂SO₄–H₂O, KNO₃–Sr(NO₃)₂– H₂O, NH₄Cl–Sr(NO₃)₂–H₂O, NH₄Cl– (NH₄)₂SO₄–H₂O, KBr–KCl–H₂O, KBr–KCl–NH₄Cl–H₂O, KBr–KNO₃– Sr(NO₃)₂–H₂O, KBr–NH₄Cl–Sr(NO₃)₂–H₂O, KNO₃–NH₄Cl–Sr(NO₃)₂–H₂O, and NH₄Cl–(NH₄)₂SO₄–NaNO₃–H₂O at 291.15 K; and KBr–NaBr–H₂O at temperatures from 283.15 to 308.15 K. The agreement is generally quite good.     

Zum Aufbau der Systeme V—(Fe,Co, Ni)—N

The constitution of the ternary systems V–Fe–N, V–Co–N, and V–Ni–N has been investigated by X-raymethods, metallographically and partly by microprobe analysis. Isothermal sections are presented for 1100°C and 1200°C respectively. Ternary complex nitrides have been observed in the systems V–Co–N and V–Ni–N. The compounds with formula V₄Co₂N (a=10.88–10.83±0.01 Å) and V₄Ni₂N (a=10.88–10.86±0.01 Å) crystallize with the partly filled Ti₂Ni-structure.

---

---

Mit 6 Abbildungen     

Deposition behaviors and patterning of TiO2 thin films on different SAMs surfaces from titanium sulfate aqueous solution

Patterning of TiO₂ thin films was successfully obtained on different self-assembled monolayers (SAMs) in aqueous solution by micro-contact printing (μCP) method. The substrates were immersed in an aqueous solution containing titanium sulfate (Ti(SO₄)₂) and hydrogen peroxide for deposition at 80 °C. The growth rates on various surfaces were as follows: sulfonic (–SO₃H) > amino (–NH₂) > methyl (–CH₃) > hydroxyl (–OH). According to the XPS results, SAMs with the terminal groups of –SO₃H and –NH₂ were favorable for the deposition. The TiO₂ film deposited on the SAM with the terminal group of –CH₃ could be easily peeled off. Clearly, TiO₂ patterns were obtained on the prepatterned surfaces of –SO₃H/–CH₃ and –NH₂/–CH₃ SAMs. The deposition mechanism might be relevant to electrostatic interaction, Stern layer, lone pair electrons and Van der Vaals forces. The TiO₂ film was anatase after annealing at 500 °C and comprised particles with an average diameter of ca. 10 nm.     

ZnO nanorods decorated calcined Mg–Al layered double hydroxides as photocatalysts with a high adsorptive capacity

The nanocomposites of magnesium–aluminium–carbonate–layered double hydroxides (Mg–Al–CO₃–LDHs) and ZnO nanorods were prepared via a homogeneous precipitation process. The presence of ZnO nanorods made the calcined Mg–Al–CO₃–LDHs, the strong adsorptive adsorbents for anions, have a photocatalytic activity. Both Mg–Al–CO₃–LDHs and the nanocomposites with various ZnO/Mg–Al–CO₃–LDHs mass ratios from 0.5:1 to 3:1 were characterized by X-ray diffraction, transmission electron microscope and UV–vis diffuse reflectance spectra. The nanocomposites quickly adsorbed the anionic dyes such as acid red G (ARG) without the light illumination, and the adsorbed dyes on the recovered nanocomposites were then degraded in a separated photocatalytic reactor. The adsorption ability of the nanocomposites and their photocatalytic activities for the removal of ARG were evaluated by the Fourier transform infrared spectra and UV–vis extinction spectra. The sample at 3:1 ZnO/Mg–Al–CO₃–LDHs mass ratio was shown to have higher photocatalytic efficiencies.     

Determination of oxygen in fluoride glass by proton activation analysis

Oxygen was determined in three kinds of ZrF₄-based fluoride glass [ZrF₄–BaF₂–GdF₃–AlF₃ (ZBGA), ZrF₄–BaF₂–LaF₃–YF₃–AlF₃–LiF–NaF (ZBLYALN) and ZrF₄–BaF₂–LaF₃–YF₃–AlF₃–LiF (ZBLYAL)] used for fabricating optical fiberby¹⁸O(p, n)¹⁸F reaction without significant nuclear interference. The main long life⁹⁶Nb nuclide was produced by the⁹⁶Zr(p,n) reaction in a non-destructive analysis of ZBGA-fluoride glass and reduced by using a coincidence system with Ge(Li) and NaI(T1) detectors. Substoichiometric separation of¹⁸F was also used to determine oxygen in fluoride glass, especially in glass containing yttrium as a component element because the⁸⁹Zr produced by the⁸⁹Y(p,n) reaction is a positron emitter, the same as¹⁸F. It was confirmed that the oxygen concentration in fluoride glass was 13–2460 ppm related to the loss by scattering.     

Extraction of actinium with di (2-ethylhexyl) phosphoric acid from hydrochloric and nitric acid solutions

The extraction of actinium with HDEHP from Cl^– and NO ₃ ^– systems has been investigated. It was found that extraction of actinium from HCl solutions is much better than from HNO₃ solutions. Stability constants of the actinium complexes Ac(X^–)²⁺, X^–=Cl^– or NO ₃ ^– , were determined. Our results show that actinium formed less stable complexes with Cl^– than with NO ₃ ^– ligands.     

Synthesis and Structure of Organoantimony Peroxides

Organoantimony peroxides (Ar₂SbO)₄(O₂)₂ (Ar = Ph, p-Tol) were synthesized by oxidation of triarylantimony with hydrogen peroxide in the presence of nitrosophenol or 4-chlorophenol in an ether solution. X-ray diffraction analysis of peroxides obtained revealed that four antimony atoms have octahedral coordination and are connected via bridging oxygen atoms and two peroxide groups. The C–Sb, Sb–O_br, Sb–OO, and O–O distances are equal to 2.106–2.127, 1.958–1.974, 2.202–2.246, 1.471, 1.470 Å (Ar = Ph) and 2.086–2.139, 1.932–1.983, 2.215–2.289, 1.445–1.466 Å (Ar = p-Tol).     

Spectroscopic study of vinylidene chloride—Vinyl chloride copolymers

Summary Deuteration technique was applied to study the micro structures of copolymer series VDC/VC by infrared spectroscopy and high resolution NMR. The CH₂ bending modes of chlorine atom containing polymers assigned as follows; –CCl₂CH₂CCl₂– 1405 cm^–1 (cryst.) and 1410 cm^–1 (amorph.), –CHClCH₂CCl₂– 1422 cm^–1, –CHClCH₂CHCl– 1428 cm^–1 (cryst.) and 1432 cm^–1 (amorph.) –CHClCH₂CH₂CHCl– 1445 cm^–1 and –CCl₂CH₂CH₂CCl₂– 1448 cm^–1. This infrared interpretation shows that only the head to tail addition occurs in the copolymerisation. Nine peaks of the methylene protons were observed clearly in the NMR spectra of the copolymers. The study of the deuterated copolymers revealed that the effects of the chemical groups until the third at both sides from the marked methylene and the stereo configuration of long VC part should be considered to assign the NMR spectra. The CCl₂ group made the chemical shift of the methylene proton to appear at lower magnetic field and the CHCl group gave the opposite behavior.

---

Zusammenfassung Mit deuterierten Monomeren wurde die Mikrostruktur der Copolymerenserie Vinyliden-Chlorid/Vinyl-Chlorid im Infraroten und mit hochauflösender Kernresonanz untersucht. Für die Biegeschwingung der Chloratome enthaltenden Polymeren der Methylengruppe ergeben sich folgende Werte: –CCl₂CH₂CCl₂– 1405 cm^–1 (krist.) und 1410 cm^–1 (amorph.), –CHClCH₂CCl₂– 1422 cm^–1, –CHClCH₂CHCl– 1428 cm^–1 (krist.) und 1432 cm^–1 (amorph.), –CHClCH₂CH₂CHCl– 1445 cm^–1 und –CCl₂CH₂CH₂CCl₂– 1448 cm^–1.Diese Interpretation des Infraroten zeigt, daß nur die Kopf-Schwanz-Addition bei der Copolymerisation stattfindet. Neun Maxima des Methylenprotons wurden deutlich in den NMR-Spektren der Copolymeren beobachtet. Die Untersuchungen an den deuterierten Copolymeren zeigen, daß die Effekte der chemischen Gruppen bis zur dritten nach beiden Seiten vom markierten Methylen und die Stereokonfiguration von langen Vinyl-Chlorid-Anteilen betrachtet werden müssen, um die NMR-Spektren zu beschreiben. Die CCl₂-Gruppe läßt die chemische Verschiebung des Methylen-protons bei geringeren magnetischen Feldern und die CHCl-Gruppe bei höheren erscheinen.

---

---

With 5 figures in 13 details and 4 tables     

Negative ion formation in compounds relevant to SF6 decomposition in electrical discharges

Dissociative and nondissociative electron attachment in the electron impact energy range 0–14 eV are reported for SOF₂ SOF₄, SO₂F₂, SF₄, SO₂, and SiF₄ compounds which can be formed by electrical discharges in SF₆. The electron energy dependences of the mass-identified negative ions were determined in a time-of-flight mass spectrometer. The ions studied include F^– and SOF ₂ ^–* from SOF₂; SOF ₃ ^– and F^– from SOF₄; SO₂F ₂ ^–* , SO₂F^–, F ₂ ^– , and F^– from SO₂F₂; SF ₄ ^–* and F^– from SF₄; O^–, SO^–, and S^– from SO₂; and SiF ₃ ^– and F^– from SiF₄. Thermochemical data have been determined from the threshold energies of some of the fragment negative ions. Lifetimes of the anions SOF ₂ ^–* , SO₂F ₂ ^–* , and SF ₄ ^–* are also reported.     

Extraction characteristics of pertechnetate with tetraphenylarsonium in the presence of chloride,nitrate and perchlorate anions

Selected extraction systems of TcO ₄ ^– –(H,Na)A–H₂O/R(TcO₄,A)–CHCl₃, C₆H₅NO₂ type, where A=Cl^–, NO ₃ ^– , ClO ₄ ^– , R=(C₆H₅)₄As⁺, were studied. The solvent extraction of sub- and super-stoichiometric ratio of TcR was performed. The solubility of (C₆H₅)₄AsTcO₄ in water, chloroform and nitrobenzene were determined too. The results of the extractions are presented in the form of TcO ₄ ^– distribution dependencies on the phase composition and the extraction constants of individual TcO ₄ ^– , Cl^–, NO ₃ ^– , ClO ₄ ^– anions and TcO ₄ ^– -Cl^–, TcO ₄ ^– –NO ₃ ^– , TcO ₄ ^– –ClO ₄ ^– ion pairs.     

1, 2-Dithiolium salts

A new method for the synthesis of 1, 2-dithiolium hydrogen sulfates by the oxidation of 1, 2-dithiole-3-thiones with hydrogen peroxide in acetic acid has been developed. From 4-(p-tolyl) 1, 2-dithiolium hydrogen sulfate a series of salts containing anions of inorganic, heteroorganic, and organic acids (Cl^–, Br^–, I^–, ClO ₄ ^– , CNS^–, VO ₃ ^– , HMoOO ₄ ^– , S₂O ₃ ^2– , S₂O ₈ ^2– , Cr₂O ₇ ^2– , Fe(CN) ₆ ^3– , Fe(CN) ₆ ^4– , B(C₆H₅) ₄ ^– , F₃CCOO^–, C₆H₂(NO₂)₃O^–) has been obtained. 4-(p-tolyl)-1, 2-dithiolium salts containing the anions NO ₂ ^– , NO ₃ ^– , ClO ₃ ^– , BrO ₃ ^– , SO ₃ ^2– , SO ₄ ^2– , S₂O ₅ ^2– and Cl₃CCOO^– dissolve in water and do not precipitate in double decomposition reactions. The reactions of 4-(p-tolyl)-1, 2-dithiolium hydrogen sulfate with sodium sulfite, disulfide, and hydrogen sulfide lead to the formation of bis[4-(p-tolyl)-1, 2-dithiol-3-yl] sulfide and disulfide and the sodium salt of 4-(p-tolyl-1, 2-dithiole-3-thiol, respectively. The reaction of 4-(p-tolyl)-1, 2-dithiolium hydrogen sulfate with solutions of salts of the alkali metals containing the anions of weak acids F^–, CNO^–, HCO ₃ ^– , CO ₃ ^2– , B₄O ₇ ^2– , HAsO ₄ ^2– , PO ₄ ^3– , CH₃COO^–, ClCH₂COO^–, etc.) forms bis[4-(p-tolyl)-1, 2-dithlol-3-yl] oxide. [8, Table 3].For part I, see [1].     

Quantum Chemical Calculation of Conformations and Rotation Barriers of Functional Groups in Arylsulfonyl Halides

The semiempirical PM3 method is used to calculate the potential functions of internal rotation of the functional groups –SO₂Cl, –NO₂, –CH₃, –OCH₃, and –NH₂ of benzenesulfonyl halide molecules (PhSO₂Hal, Hal = F, Cl, Br, I) and twelve substituted derivatives of benzenesulfonyl chloride. Molecular conformations have been determined and internal rotation barriers of the functional groups have been calculated. For meta- and para-substituted benzenesulfonyl chlorides, the projection of the S–Hal bond is perpendicular to the plane of the benzene ring. The rotation barriers of the –SO₂Hal group of benzenesulfonyl halides increase in the series Hal = F, Cl, Br, I. The rotation barriers of the –SO₂Cl group of benzenesulfonyl chloride with meta- and para-substituents slightly increase with the electron-donor properties of the substituent. The rotation barriers of the functional groups of ortho-substituted benzenesulfonyl chlorides are 3 or 4 times as high as those of the meta- and para-isomers. For para-substituted benzenesulfonyl chlorides, the rotation barriers of the functional groups increase in the order –CH₃, –NO₂, –SO₂Cl, –OCH₃, –NH₂.     

Thermodynamics of aqueous gallium chloride. Apparent molar volumes and heat capacities at 25°C

Apparent molar volumes and heat capacities of aqueous GaCl₃ have been measured at 25°C in binary GaCl₃ solutions up to 3 mol-kg^–1, and in ternary GaCl₃-HCl solutions, containing 0.1345 mol-kg^–1 HCl to suppress hydrolysis, up to a concentration of 1 mol-kg^–1 GaCl₃. Using the Pitzer interaction model for the excess properties, and using ridge regression for the derivation of physically meaningful regression parameters, the measurements yield the following results for the standard molar properties and Pitzer parameters at 25°C: V⁰(GaCl₃)=12.85 cm³-mol^–1; ₀ ^v (GaCl₃)=1.10×10^–4 kg-mol^–1–J^–1–cm^–3; _v ¹ (GaCl₃)=2.12×10^–3 kg–mol^–1–J^–1–cm³; Cv(GaCl₃)=1.34×10^–5 kg²–J^–1–cm³; V^o(GaOHCl₂)=13.84 cm³–mol^–1; C _o ^p (GaCl₃)=–480.8 J–K^–1–mol^–1; _J ⁰ (GaCl₃)=–8.02×10^–6 kg–mol^–1–K^–2; _J ¹ (GaCl₃)=0.73×10^–4 kg–mol^–1–K^–2; C_J(GaCl₃)=–2.52×10^–6 kg²-mol^–2-K^–2; C _p ⁰ (GaOHCl₂)=20.4 J-K^–1-mol^–1. The latter parameter has only mathematical significance, its physical meaning is unclear. Comparison of the present experimental results for the standard molar properties of Ga³⁺ with semi-empirical correlations casts doubt upon the general validity of these correlation methods for trivalent cations.     

IR-Spektralanalyse von Gl?sern des Systems TeO2?V2O5

Studies of glasses and their crystalline products in the TeO₂–V₂O₅ system were made in the 1400–400 cm^–1 range. A continuous shift of the V=O-band from 1020 cm^–1 to 940 cm^–1 was found in the glasses with decreasing concentration of V₂O₅, as well as a sharp decrease in the intensity at 830 cm^–1. On the basis of the results obtained, it is concluded that with increasing TeO₂ content, the structure of the glasses is changed, caused by the breaking of the V–O–V bonds and the formation of Te–O–Te bridges.The IR-spectrum of the 2TeO₂·V₂O₅ compound in both crystalline and vitreous states was studied for the first time. The behaviour of the absorption bands is related to the structure of the glasses studied.     

Enthalpies of formation of some phases present in the Y−Ba−Cu−O system by solution calorimetry

Enthalpies of some of the phases in the Y–Ba–Cu–O system were determined by solution calorimetry using a Calvet microcalorimeter. The standard enthalpies of formation for the phases were found to be YBa₂Cu₃O_6.60, –2627.9; YBa₂Cu₃O_6.77, –2641.8; YBa₂Cu₃O_6.90, –2652.0; YBa₂Cu₃O_6.99, –2659.3; Y₂Cu₂O₅, –2198.6; Y₂BaCuO₅, –2656.4; BaCuO_2.33, –788.6; and BaCuO_2.42, –796.2 kJ-mol^–1.     

Quantitative chemical analysis on paper: Determination of phosphate in the presence of large quantities of other ions

Summary A rapid method has been developed for the determination of phosphate by means of filter paper impregnated with lead iodide. A sample is added to the impregnated filter paper by means of a capillary, and after irrigation to cause migration of the ions a white spot is obtained as the lead iodide is converted into the phosphate. The weight of the spot is dependent on the p_H and the quantity of phosphate present.The determination is possible in the presence of SCN^–, Cl^–, Br^–, NO₃ ^–, CO₃ ^–, I^–, IO₃ ^–, CH₃COO^–, B₄O₇ ^2–, F^–, Sb₂O₇ ^4–, K⁺, Na⁺, NH₄ ⁺, OH^–, H⁺, succinic, citric and tartaric acids. The determination is impossible in the presence of C₂O₄ ^2–, SO₄ ^2–, MoO₄ ^2–, NO₂ ^–, SO₃ ^2–, S^2–, CrO₄ ^2–, or CO₃ ^2–.The method permits the determination of 7–100g of phosphate with an accuracy of 2%.

---

Zusammenfassung Ein schnelles Verfahren zur Phosphatbestimmung wird besehrieben, bei dem man sich eines mit Bleijodid imprägnierten Filterpapiers bedient. Die Probe wird mit einer Kapillare auf das Papier aufgebracht. Man erleichtert die Ionenbewegung durch geeignete Befeuchtung und erhält einen weißen Fleck infolge Umsetzung des Bleijodids in -phosphat. Das Gewicht des Fleckens hängt vom p_H und von der Phosphatmenge ab.Die Bestimmung ist möglich in Gegenwart von SCN^–, Cl^–, Br^–, NO₃ ^–, CO₃ ^–, J^–, JO₃ ^–, CH₃COO^–, B₄O₇ ^2–, F^–, Sb₂O₇ ^4–, K⁺, Na⁺, NH₄ ⁺, OH^–, H⁺, Bernsteinsäure, Zitronensäure und Weinsäure; sie ist nicht möglich bei Gegenwart von C₂O₄ ^2–, SO₄ ^2–, MoO₄ ^2–, NO₂ ^–, SO₃ ^2–, S^2–, CrO₄ ^2– oder CO₃ ^2–. 7 bis 100g Phosphat können mit einer Genauigkeit von 2% bestimmt werden.

---

Résumé On a développé une méthode rapide pour le dosage des phosphates sur papier-filtre imprégné d'iodure de plomb. On dépose l'échantillon sur le papier-filtre imprégné, à l'aide d'un capillaire, et, après humidification pour provoquer la migration des ions, on obtient une tache blanche quand l'iodure de plomb est converti en phosphate. Le poids de la tache dépend du p_H et de la quantité de phosphate présent.Le dosage est possible en présence de SCN^–, Cl^–, Br^–, NO₃ ^–, CO₃ ^–, I^–, IO₃ ^–, CH₃COO^–, B₄O₇ ^2–, F^–, Sb₂O₇ ^4–, K⁺, Na⁺, NH₄ ⁺, OH^–, H⁺, et des acides succinique, citrique et tartrique. Il est impossible en présence de C₂O₄ ^2–, SO₄ ^2–, MoO₄ ^2–, NO₂ ^–, SO₃ ^2–, S^2–, CrO₄ ^2– ou CO₃ ^2–.La méthode permet le dosage de 7 à 100g de phosphate avec une précision de 2%.

     

An aqueous thermodynamic model for a high valence 4∶2 electrolyte Th4+−SO 4 2− in the system Na+−K+−Li+−NH 4 + −Th4+−SO 4 2− −HSO 4 − −H2O to high concentration

An aqueous thermodynamic model that is valid from zero to high concentration is proposed for the Na⁺–K⁺–Li⁺–NH ₄ ⁺ –Th⁴⁺–SO ₄ ^2– –HSO ₄ ^– –H₂O system. The model is based on the aqueous ion-interaction model of Pitzer and coworkers. The thorium sulfate complex species Th(SO₄)₂(aq) and Th(SO₄) ₃ ^2– are also included in the model. The final thermodynamic model presented here accurately predicts all reliable thermodynamic data, including solvent extraction and solubility data, for the Na⁺–K⁺–Li⁺–NH ₄ ⁺ –Th⁴⁺–SO ₄ ^2– –HSO ₄ ^– –H₂O system to high concentration. The aqueous thermodynamics of high-valence (3:2, 4:2), electrolytes are complicated by very strong specific ion interactions or ion pairing in dilute solution and by an effective redissociation of aqueous complex species at high concentration. Methods of treating these complications, in terms of valid aqueous thermodynamic models, are discussed in detail for the high-valence Th⁴⁺–SO ₄ ^2– –H₂O system.     

Kinetics of Sulfur Oxide, Sulfur Fluoride, and Sulfur Oxyfluoride Anions with Ozone

Rate constants and product branching ratios were measured for eleven sulfur oxide, sulfur fluoride, and sulfur oxyfluoride anions reacting with O₃. The SO^– ₂ ion reacts rapidly to form –O^– ₃, SO^– ₃, and e^–. The temperature dependence of the branching ratio shows more reactive detachment and less SO^– ₃ formation at higher temperature. SO^– ₃ reacts with O₃, forming SO^– ₄ at 1/3 to 1/4 of the collisional rate from 200 to 500 K, respectively. At 300 K, SF^– ₆ charge transfers to O₃ at 20% of the collisional rate. F₂SO^– ₂ reacts with O₃ at a few percent of the collision rate, forming both O^– ₃ and FSO^– ₃; The ion F₃SO^– reacts slowly with O₃ to form F₃SO^– ₂. The ions SO^– ₄, SF^– ₅, FSO^– ₂, FSO^– ₃, F₃SO^–, and F₅SO^– are unreactive with O₃. A trend is noted relating the ion reactivity with the coordination of the central sulfur atom, i.e., the number of S–F bonds plus two times the number of S=O bonds. Only ions with a sulfur coordination of 4 or 6 are reactive, although the reaction rate constants are generally small. The reactivity trends appear to be partially explained by spin conservation. These reactions are all sufficiently slow, so O₃ reactions should not play a major role in SF₆/O₂ discharges. All ions studied have been found to be unreactive with O₂.     

Influence of Anions on Electrochemical Properties of Polypyrrole-Modified Electrodes

The influence of anions ClO₄ ^–, NO₃ ^–, Cl^–, SO₄ ^2–, and DDS^– (dodecyl sulfate) on the cyclic voltammetric response of polypyrrole-modified electrodes is studied. The change in the film composition is examined by electron probe microanalysis. It is established that essential changes in the shape of voltammograms take place during cycling if the anions are not sufficiently freely mobile in the polymer film and insertion of cations from the solution is necessary to guarantee electroneutrality of the system. Some differences between the mobility of Cl^– ions and ClO₄ ^– or NO₃ ^– ions are in good agreement with the results of semi-empirical quantum chemical calculations showing that the interaction of Cl^– and Br^– ions with pyrrole oligomers is stronger than that of NO₃ ^– or ClO₄ ^– ions. Nevertheless, it is established that the peak current determined from voltammograms increases linearly with the increase of the scan rate with very high correlation coefficient. It means that it is possible to describe the behavior of ClO₄ ^–, NO₃ ^– and Cl^– ions in the framework of the model of free ions. The redox behavior of the PPy films doped with anions of low mobility such as SO₄ ^2– and DDS^– depends essentially on the nature of cations in the test solution. It is found that the mobility of cations increases in the row Li⁺ < Na⁺ < K⁺ < Cs⁺. The mobility of DDS^– ions in the PPy in ethanolic solution is significantly higher and their electrochemical properties are quite similar to PPy|Cl or NO₃ ^– film in aqueous solution.