扩链法制备高分子量聚对二氧环己酮的研究

以辛酸亚锡为催化剂对对二氧环己酮单体(PDO)开环聚合合成聚对二氧环己酮(PPDO),在聚合的后期,用1,6-六亚甲基二异氰酸酯(HDI)为扩链剂进行扩链反应.研究了扩链剂用量对扩链反应的影响,加入相对于PPDO用量的0.78 wt%的HDI就能得到粘均分子量为2.35×105的PPDO.在分子量相近的情况下,扩链后产物的热稳定性和玻璃化转变温度均比未扩链的高,扩链前后的晶型没有发生变化,但结晶度大幅度降低,拉伸性能变化不大.     

聚乙烯亚胺接枝聚对二氧环己酮的合成与表征

以聚乙烯亚胺(PEI)为大分子引发剂,辛酸亚锡为催化剂,引发对二氧环己酮(PDO)单体开环聚合,通过graft from法制备了聚乙烯亚胺接枝聚对二氧环己酮接枝共聚物(PEI-g-PPDO).通过FTIR、1H-NMR、1H-13C-HMQC等对共聚物的分子结构进行了表征.共聚产物的接枝链长度、亲疏水链段含量等可以通过反应物中单体的含量进行有效调控;用DSC对共聚物的热性能和结晶性能研究表明,接枝链段长度越大、PPDO链段含量越高,共聚物的结晶性能也越好.采用芘探针法初步研究了共聚物在水中的胶束化行为,PEI-g-PPDO接枝共聚物在水中可以形成较稳定的聚集体.     

聚对二氧环己酮/聚乙二醇两亲性聚合物共网络的合成与表征

以辛酸亚锡为催化剂,季戊四醇(PTOL)为引发剂,引发对二氧环己酮(PDO)单体开环聚合,合成了以PTOL为核的四臂聚对二氧环己酮(4s-PPDO).通过直接将4s-PPDO预聚物和聚乙二醇(PEG)于熔点以上、惰性气体保护下与偶联剂甲苯二异氰酸酯(TDI)交联共聚得到聚对二氧环己酮/聚乙二醇(PPDO-b-PEG)两亲性共网络聚合物(PPDO-PEG APCNs).研究了两亲性聚合物共网络结构、配比组成、溶剂种类等对聚合物溶胀率的影响,结果表明APCNs在不同类型的溶剂中表现出不同的溶胀行为,可以通过调节偶联剂的用量及PPDO/PEG的投料比来满足不同的实际需求.通过示差扫描量热分析(DSC)详细研究APCNs的结晶性能,证实交联反应降低APCNs的结晶度和结晶尺寸.     

HDI作为扩链剂合成含PLLA和PBS链段的聚酯氨酯

以数均分子量为6350g/mol端羟基聚L-乳酸(PLLA-OH)与10500g/mol端羟基聚丁二酸丁二酯(PBS-OH)为预聚物,六亚甲基二异氰酸酯(HDI)为扩链剂,通过熔融反应制备了分子量高达30×104g/mol的可完全生物降解聚酯氨酯(PEU).研究了异氰酸根(NCO)与羟基比例对扩链反应的影响.结果表明,当[NCO]/[OH]=1∶1时,扩链效果最好,PEU分子量最大;PEU分子量随着预聚物中PBS含量增大而提高.通过核磁共振谱(1H-NMR)确定了PEU的结构与组成,并对聚酯氨酯进行了凝胶渗透色谱(GPC)、差示扫描量热(DSC)、热重分析(TGA)以及拉伸性能测试.DSC结果显示,扩链后PEU的结晶主要由PBS链段产生,而PLLA链段几乎不结晶;TGA结果表明,PEU的热降解分两步进行,第一步为PEU中PLLA链段的热降解,第二段为其中PBS链段的降解;拉伸测试结果表明,PBS与PLLA的共聚能够制备拉伸强度与断裂伸长率优异的聚合物材料.     

紫外光交联可降解聚对二氧环己酮/聚乙二醇薄膜制备与表征

以2,2-二甲氧基-2-苯基苯乙酮(DMPA)为引发剂,将四臂端丙烯酸酯聚对二氧环己酮(PPDO-4AC)和聚乙二醇双丙烯酸酯(PEG-DA)经紫外光照射制得PPDO/PEG交联薄膜.研究了光照时间和DMPA用量对PPDO/PEG交联薄膜凝胶含量的影响.DSC研究表明共聚物中两组分的相容性较好,Tg随着共聚物中PEG链...     

增容剂对聚对二氧环己酮/聚乳酸复合材料体外降解的影响

以聚对二氧环己酮与聚乳酸的无规共聚物作为增容剂,在聚对二氧环己酮/聚乳酸复合物中添加不同比例的增溶剂后,在37℃的缓冲溶液(pH 7.44)中,进行为期八周的体外降解实验,定期观察其吸水率与质量损失,pH值以及机械性能的改化,结果发现增容剂的添加,加快了聚对二氧环己酮/聚乳酸复合物的降解速度。     

以季戊四醇为引发剂的星形聚对二氧环己酮的合成

本文以辛酸亚锡(SnOct2)为催化剂,以季戊四醇(PTOL)为引发剂,引发对二氧环己酮PDO单体开环聚合,合成了具有新颖结构的星形PPDO,研究了单体和引发剂的比例、单体和催化剂的比例、温度、时间等反应条件对聚合反应的影响,结果表明,通过调节PDO和PTOL的比例可以控制聚合产物的分子量。     

聚对二氧环己酮/聚乙二醇多嵌段共聚物的合成与表征

首先合成双端羟基的聚对二氧环己酮预聚物(PPDO)和双端羧基的聚乙二醇预聚物(PEG),然后以丁二酸酐/二环己基碳二亚胺(DCC)将PPDO与PEG偶联共聚,得到PPDO/PEG多嵌段共聚物.通过1H-NMR和GPC表征了聚合物的结构和分子量.采用差示扫描量热法(DSC)和热重分析(TGA)研究了共聚物的结晶性能和热稳定性.用透析法制备了共聚物纳米粒子,并用动态光散射(DLS)表征了共聚物纳米粒子的粒径及分散度,结果表明,随着共聚物亲水链段PEG含量的增加,其纳米粒子更易形成,粒子粒径随共聚物分子量增大而增大.     

增塑剂对对二氧环己酮均聚物及共聚物可吸收缝合线结构与性能的影响

以对二氧环己酮均聚物和对二氧环己酮 乙交酯共聚物为原料 ,加入无毒性增塑剂 (邻苯二甲酸酯 )进行纺丝 ,得到聚对二氧环己酮单丝缝合线 (PDS)和对二氧环己酮 乙交酯共聚物单丝缝合线 (PDG) .用DSC、WAXD、声速法对缝合线的结构与性能进行了测试 ,研究了增塑剂含量对缝合线的物理力学性能的影响 .研究结果表明 ,增塑剂使样品的玻璃化转变温度Tg 降低 ,聚合物结晶完善程度降低 .一定含量的增塑剂能够赋予缝合线较好的柔性 ,并使缝合线的初始强度有不同程度的提高     

赖氨酸乙酯扩链聚氨酯弹性体的制备

以1,6-六亚甲基二异氰酸酯(HDI)为硬段、聚碳酸酯二元醇(PCDL)为软段、赖氨酸乙酯盐酸盐(Lys-OEt)作为扩链剂合成一种新型聚碳酸酯型聚氨酯弹性体.通过力学性能测试、原子力显微镜(AFM)、红外光谱分析和细胞培养,探讨了聚氨酯弹性体软硬段比例、扩链剂对材料性能的影响和材料的细胞毒性.结果表明:随着硬段含量的增加,聚氨酯的机械性能提高.采用Lys-OEt扩链的聚氨酯弹性体拉伸强度达到18.6 MPa,在Lys-OEt、1,4-丁二醇(BDO)、二羟甲基丙酸(DMPA)3种扩链剂中力学性能最佳.初步的细胞培养实验证明,该材料具有良好的细胞相容性.     

A new approach to prepare high molecular weight poly(p-dioxanone) by chain-extending from dihydroxyl terminated propolymers

As poly(p-dioxanone) (PPDO) with a high molecular weight (viscosity-average molecular weight (M_ν) > 100,000 g/mol) is not easy to be obtained in a short time, a new approach has been developed to produce high molecular weight poly(p-dioxanone) (HPPDO-T) by chain-extending reaction of hydroxyl-terminated PPDO (HPPDO) prepolymers using toluene-2,4-diisocyanate (TDI) as chain extender. Here HPPDO prepolymers were synthesized via ring-opening polymerization of p-dioxanone (PDO) monomer initiated by 1,4-butanediol (BD) with Stannous octoate (SnOct₂) as catalyst. The resulting polymers, having a highest M_ν of 250,000 g/mol, were characterized by ¹H NMR, TG, DSC and WXRD. HPPDO prepolymers can react with TDI more effectively than the PPDO prepolymers initiated by mono-functional initiators, and the molecular weights of resulting chain-extended products increase several decade times in an hour comparing to the prepolymers. The chain extended products HPPDO-T have better thermal stability, and higher glass transition temperatures and lower crystallization rates than PPDO homopolymer.     

聚对二氧环己酮的合成及其结晶性能

以对二氧环己酮为原料,经开环聚合反应合成了聚对二氧环己酮（PPDO）。用DSC曲线研究了PPDO的非等温结晶以及非等温冷结晶性能。采用Ozawa方程拟合了PPDO的非等温结晶曲线。采用莫志深方程拟合了PPDO非等温冷结晶曲线。     

高分子量聚对二氧环己酮体外降解研究

对高分子量(Mν=2.8×105)的聚对二氧环己酮条状样品在37℃磷酸缓冲溶液(PBS)中的降解行为进行了研究,通过定期观察其吸水率与质量损失,pH,特性黏数,降解过程中样品形态与晶体结构,热力学性能与机械性能的改化,发现此高分子量的聚对二氧环己酮在体外降解过程中质量损失与吸水率变化不大,但分子量下降明显,同时样品表面缺陷逐渐增加;结晶度与玻璃化温度随之改变,但其晶体结构基本保持不变;到第6周时,其力学强度基本消失.证明高分子量PPDO具有较慢的降解速度,显示出很好的稳定性.     

A novel aromatic–aliphatic copolyester consisting of poly(1,4‐dioxan‐2‐one) and poly(ethylene‐co‐1,6‐hexene terephthalate): Preparation,thermal, and mechanical properties

A novel multiblock aromatic–aliphatic copolyester poly(ethylene‐co‐1,6‐hexene terephthalate)‐copoly(1,4‐dioxan‐2‐one) (PEHT‐PPDO) was successfully synthesized via the chain‐extension reaction of dihydroxyl teminated poly(ethylene‐co‐hexane terephthalate) (PEHT‐OH) with dihydroxyl teminated poly(1,4‐dioxan‐2‐one) (PPDO‐OH) prepolymers, using toluene‐2,4‐diisocyanate as a chain extender. To produce PEHT‐OH prepolymer with an appropriate melting point which can match the reaction temperature of PEHT‐OH prepolymer with PPDO‐OH prepolymer, 1,6‐hexanediol was used to disturb the regularity of poly(ethylene terephthalate) segments. The chemical structures and molecular weights of PEHT‐PPDO copolymers were characterized by ¹H NMR, FTIR, and GPC. The DSC data showed that PPDO‐OH segments were miscible well with PEHT‐OH segments in amorphous state and that the crystallization of copolyester was predominantly contributed by PPDO segments. The TGA results indicated that the thermal stability of PEHT‐PPDO was improved comparing with PPDO homopolymer. The novel aromatic–aliphatic copolyesters have good mechanical properties and could find applications in the field of biodegradable polymer materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2828–2837, 2010     

三乙基铝-乙酰基丙酮金属配合物-水配合体系引发对二氧环己酮(PDO)开环聚合的研究

近年来,生物降解材料受到了越来越广泛的关注．聚对二氧环己酮(PPDO)具有优异的生物相容性、生物可吸收性、生物降解性和良好的柔韧性,目前已被成功地应用于医用材料领域．而在环境材料如薄膜、板材、发泡材料等领域也具有广泛的应用前景．PPDO作为一种新材料,虽然早在20世纪70年代就已经合成出来,     

A facile approach to preparation of long-chain-branched poly(p-dioxanone)

Long-chain-branched poly(p-dioxanone)s (LCB-PPDOs) with different branch densities were prepared via the chain-extending reaction of hydroxyl group terminated linear bi-functional PPDO (2a-PPDO) and star-like tri-functional PPDO (3a-PPDO) prepolymers, which were synthesized by the ring-opening polymerization of p-dioxanone (PDO) using 1,4-butanediol (BD) and trimethylolpropane (TMP) as multi-functional initiators, respectively. The undesirable gelation was successfully depressed by adjusting the chain length and feed ratio of prepolymers. The average molecular weight between branch points (M_b) and the average number of branch per 100,000 g/mol (B_n) of LCB-PPDOs were calculated from the ¹H NMR spectra. The average number of branch ranged from 0 to 6.72 branch points per 100,000 g/mol, and the number-average molecular weights between branch points ranged from 6900 to 20,500 g/mol. The results of differential scanning calorimetry (DSC) showed that the crystallization behavior of LCB-PPDOs was changed evidently with the branch density. Small-amplitude dynamic oscillatory rheometer was used to investigate the rheological properties of the melts of LCB-PPDO including zero-shear viscosity, storage modulus, relaxation times and loss angle, which largely depended on the branch density and length of LCB-PPDOs. Therefore, the rheological behaviors of PPDO can be well-controlled via synthesizing LCB-PPDOs with the desired architectures.