Synthesis and fluorescence study of 3-aminoalkylamidonapthalimides

A new series of fluorescent 3-aminoalkylamidonapthalimides were synthesized starting form 1,8-naphthalic anhydride. The structure of these compounds was characterized by ¹H NMR, ¹³C NMR, IR and Mass spectral analysis. The solvent effect on ¹H and ¹³C NMR of these compounds was studied in CDCl₃, CDCl₃:DMSO-d₆ (7:3, v/v) and DMSO-d₆. NMR chemical shift of the ortho and para protons and meta carbons of naphthalene ring showed maximum variation on moving from CDCl₃ to DMSO-d₆. In CDCl₃ solvent naphthalene ring may exist in slightly puckered form while in DMSO-d₆ it attains maximum planar configuration. Fluorescent properties of the title compounds and their precursors were investigated in different solvents like chloroform, ethanol, acetonitrile, acetone, DMSO and water. 3-Aminoalkylamidonapthalimides exhibited improved fluorescence than their precursors. Cyclic amino derivatives yielded higher fluorescence quantum efficiency in protic solvents, ethanol and water. Acylic amino derivatives yielded high fluorescence quantum efficiency in chloroform solvent. The maximum fluorescence quantum yield up to 0.14 was found for butyl amine derivative in chloroform solvent. In general proton accepting nucleophilic solvents like acetone and DMSO quenched the fluorescence.     

Solvation in binary mixtures of water and polar aprotic solvents: theoretical calculations of the concentrations of solvent-water hydrogen-bonded species and application to thermosolvatochromism of polarity probes

Thermo-solvatochromism of two polarity probes, 2,6-diphenyl-4-(2,4,6-triphenyl- pyridinium-1-yl)phenolate, RB, and 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl) phenolate, WB, in aqueous acetone, Me2CO, and aqueous dimethylsulfoxide, DMSO, has been studied. The data obtained have been analyzed according to a recently introduced solvation model that explicitly considers the presence of 1:1 organic solvent-water hydrogen-bonded species, S-W, in the bulk binary mixture and its exchange equilibria with (S) and (W) in the solvation shell of the probe. Calculations require reliable values of Kdissoc, the dissociation constant of S-W. Previously, this has been calculated from the dependence of the densities of binary solvent mixtures on their composition. Using iteration, the volume of the hydrogen-bonded species, VS-W, and Kdissoc were obtained simultaneously from the same set of experimental data. This approach may be potentially suspect because Kdissoc, and VS-W are highly correlated. Therefore, we extended a recently introduced approach for the calculation of Valcohol-W to binary mixtures of water with acetone, acetonitrile, N,N-dimethylformamide, DMSO, and pyridine. This approach includes: Determination of VS-W from ab initio calculations by the COSMO solvation model; correction of these volumes for the nonideal behavior of the binary solvent mixtures at different temperatures; use of corrected VS-W as a constant (not an adjustable parameter) in the equation that is employed to calculate Kdissoc (from density versus binary solvent composition). Solvation of RB and WB by Me2CO-W showed different behavior from that of aqueous DMSO. Thus, water is able to displace Me2CO more efficiently than DMSO from the probe solvation shell. Me2CO-W and DMSO-W displace their corresponding precursor solvents; this is more efficient for the former case because the strong DMSO-W interactions attenuate the solvation capacity of this species. Temperature increase resulted in desolvation of both probes, due to concomitant decrease of the structures of the component solvents.     

Spectrophotometric determination of water in organic solvents with solvatochromic dyes

The correlation between the absorbance at a fixed wave-length of a betaine dye in an organic solvent and the water content of the same solvent has been investigated. The betaine dyes investigated are 2,4,6-triphenyl-N-(3,5-diphenyl-4-hydroxyphenyl)pyiidinium betaine (I), 1-methyl-8-hydroxyquinolinium betaine (II), 1-methyl-6-hydroxyquinolinium betaine (III) and 2-methyl-5-isoquinolinium betaine (IV), and the organic solvents are ethanol, isopropanol, acetone, dioxan, acetonitrile and pyridine. The possibility of determining a trace amount of water in an organic solvent is demonstrated. The sensitivity of the method depends on solvent and dye but for example, 0.06 mg of water in 1 ml of acetonitrile can be detected with III with an ordinary spectrophotometer. The limitations of practical applications are discussed.     

Spectrophotometric determination of water in organic solvents with solvatochromic dyes-II

The correlation between the absorbance of a merocyanine dye in an organic solvent and the water content of the solvent has been investigated. The merocyanine dyes investigated are 1-methyl-4-[(4-oxocyclohexa-2, 5-dienylidene)-ethylidene]-1,4-dihydropyridine (I), 1-methyl-4-[(2-oxocyclohexa-3,5-dienylidene)-ethylidene]-1, 4-dihydropyridine, 1-methyl-2-[(4-oxocyclohexa-2,5-dienylidene)-ethylidene]-1, 2-di-hydropyridine and 1-methyl-2-[(oxocyclohexa-3,5-dienylidene)-ethyl-idene]-1, 2-dihydropyridine, and the organic solvents are isopropanol, acetone, acetonitrile and pyridine. The possibility of determining a trace amount of water in an organic solvent is demonstrated, and a procedure is proposed for the determination of trace water in pyridine. The sensitivity of the method depends on the solvent, being more sensitive in an aprotic solvent than in a protic one ; for example, 0.05 or 0.27 mg of water in 1 ml of acetonitrile or of isopropanol respectively can be detected with I, by use of an ordinary spectrophotometer.     

Understanding the enthalpic and entropic contributions to solvent effects on osmium tetroxide complexation with pyridine

Solvent effects on the complex formation of osmium tetroxide (which is the most reliable reagent available for the cis-hydroxylation of alkenes) and pyridine were investigated using spectrophotometric techniques in different solvents (benzene, chloroform, acetone, acetonitrile, anisole, tetrahydrofuran, nitrobenzene and nitromethane). The enthalpy and entropy exhibit opposing effects on stability constant with the change in solvent. In these solvents, the entropy and enthalpy of the reaction are found to be mainly influenced by the donor number (DN) of the solvents.     

Solubility and Thermodynamic Properties of A Hexanediamine Derivative in Pure Organic Solvents and Nonaqueous Solvent Mixtures

The solubility of N,N′-Bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine in seven pure solvents (acetonitrile, acetone, methyl acetate, ethyl acetate, propyl acetate, isopropyl acetate and isobutyl acetate) and two binary solvent mixtures (acetone?+?acetonitrile and methyl acetate?+?acetonitrile) were measured from 273.15 to 303.15 K at atmospheric pressure by a dynamic method. The solubility data in these pure solvents were correlated by the modified Apelblat model, the Wilson model and the NRTL model, and that in the binary solvents mixture were fitted to the CNIBS/R–K model and the NRTL model. Furthermore, the mixing thermodynamic properties in pure and binary solvent systems were calculated and are discussed, based on the NRTL model. Finally, the applicability of the model of Zhang et al. (Ind Eng Chem Res 51:6933–6938, 2012) in correlating solubility data versus dielectric constant was extended from organic solvent–water mixtures to pure organic solvents and nonaqueous organic solvent mixtures. It was found that the dissolution behavior of a compound in the binary solvent mixtures can be predicted to some extent from those in pure solvents.     

Analytical investigations of the behavior of silole-core dendrimers with peripheral globotriaose in water and acetone/water mixed solvent

A new compound having a 2,3,4,5-tetraphenylsilole derivative on the center silicon of Dumbbell(1)6Gb3; Silole-Dumbbell(1)6Gb3 (1) was previously reported. It was found that 1 exhibited strongly increased fluorescence both in water and in a 96% acetone/water mixed solvent. The physical behavior of 1 in water and in the 96% acetone/water mixed solvent was investigated, and analyses including fluorescence quantum yields, dynamic-light-scattering (DLS), atomic-force-microscopy (AFM), and fluorescence microscopy were carried out. It was clarified that 1 dynamically formed different types of aggregates in water and in higher acetone concentrations to yield high aggregation-induced emission (AIE) effects due to the formation of micelle-like particles in water and inversion-type micelles in the acetone/water mixed solvent, respectively.     

Reaction of butylmercury nitrate with Lewis bases

The reaction of butylmercury nitrate with organic bases has been studied in four solvents. BuHgNO₃ is molecular in benzene and acetone but ionic in water; in acetonitrile there is an equilibrium between molecular and ionic species. In benzene solution bases form 1 : 1 adducts, 3-coordinate with pyridine, 4-methylpyridine, bipyridine, Et₃N, Bu₃N, PBu₃, PPh₃ or diphos, 4-coordinate with tetramethyldiaminoethane. Adduct stabilities and enthalpies of formation are reported. In acetone solution bases displace nitrate, in water bases displace coordinated water and in acetonitrile they displace nitrate or coordinated solvent; in all three solvents the end products are BuHg · base⁺ and NO₃^-. Enthalpies are reported for these reactions.Distribution of BuHgNO₃ between benzene and water is concentration dependent. Addition of phosphines increases the proportion of the mercury in the benzene phase; addition of heterocyclic bases increases the proportion in the aqueous phase; addition of tertiary amines first increases the proportion in the benzene phase, then, with higher base concentrations, that in the aqueous phase.     

The basicity of pyridine and its tendency towards cationic homoconjugation in non‐aqueous media

Acid dissociation constant, pK_a, of protonated pyridine, determined in the polar protophobic aprotic solvent, acetone, has been compared with pK_a values of the pyridinium ion in a variety of other polar solvents including aprotic protophobic ones, acetonitrile, benzonitrile, nitrobenzene, nitromethane, and propylene carbonate, in the protophilic aprotic dimethyl sulfoxide and N,N‐dimethylformamide, as well as in the amphiprotic methanol. On the basis of the set of these pK_a values, the effect of the medium on the basicity of pyridine is discussed. Further, based on the cationic homoconjugation constants of pyridine conjugated with the pyridinium cation in the non‐aqueous solvents, the tendency of pyridine towards homoconjugation reactions has also been discussed. Finally, both the basicity of pyridine and its tendency towards cationic homoconjugation has been compared with analogous properties of pyridine N‐oxide.     

Preferential Solvation in Aqueous–Organic Mixed Solvents Using Solvatochromic Indicators

Solvatochromism of the twisted intramolecular charge-transfer (TICT) fluorescence of 4-(N,N-dimethylamino)benzonitrile (DMABN) in pure water, methanol, ethanol, 1-propanol, 2-propanol, acetone, acetonitrile, and in the corresponding aqueous–organic binary mixed solvents was systematically studied and an empirical solvent polarity scale (F _B) based on the DMABN solvatochromism was defined. The F _B parameters of the explored binary mixed solvents as a function of solvent composition were analyzed by a stepwise solvent-exchange (SSE) model to clarify the preferential solvation (PS) of the probe dye in these binary mixed solvents. Solvation diagrams toward DMABN in the mixed solvents, i.e., the local solvent composition in the solvation shell of DMABN molecules was depicted as a function of bulk solvent composition to visualize the PS in these mixed solvents. For comparison, a similar PS analysis was applied to the solvatochromism of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1- yl)phenolate (ET-30) and pyrene (Py) in these mixed solvents; the responsive PS pattern of the mixed solvents toward the specific indicator dye of DMABN, ET-30, and Py was then discussed in terms of the chemical properties of the probe dye, the properties of the mixed solvents, and the solute–solvent and solvent–solvent interactions.     

Extreme fluorescence sensitivity of some aniline derivatives to aqueous and nonaqueous environments: mechanistic study and its implication as a fluorescent probe

Effects of solvent water on the photophysical properties of a series of meta- and para-substituted anilines have been investigated by means of time-resolved fluorescence, transient absorption, and photoacoustic measurements. Some aniline derivatives exhibit extremely short fluorescence lifetime (tau(f)) and small quantum yield (Phi(f)) in water (e.g., tau(f) = 45 ps and Phi(f) = 0.0019 for m-cyanoaniline (m-ANCN) in H(2)O), which is in marked contrast with their much larger values in nonaqueous solvents (tau(f) = 7.3 ns and Phi(f) = 0.14 for m-ANCN in acetonitrile). Photoacoustic and transient absorption measurements show that the remarkable fluorescence quenching of m-ANCN in water is attributed almost exclusively to fast internal conversion. The lifetime measurements of m-ANCN in H(2)O/acetonitrile binary solvent mixtures reveal that the quenching is related to variation of hydrogen-bonding interactions between the amino group and water molecules and the conformational change of the amino group upon electronic excitation. Similar fluorescence quenching due to solvent water is also found for N-alkylated m-ANCNs. The drastic differences in the fluorescence intensity and lifetime of m-ANCNs under hydrophobic and hydrophilic environments and also the large solvent polarity dependence of the fluorescence band position suggest the possibility that they can be utilized as fluorescent probes for investigating the microenvironment of biological systems. In suspensions of human serum albumin (HSA) in water, remarkable enhancement of the fluorescence intensity and lifetime is observed for m-ANCN and its N-alkylated derivatives, demonstrating that m-ANCNs can be a candidate for novel fluorescent probe with small molecular size.     

The use of acetone as a substitute for acetonitrile in analysis of peptides by liquid chromatography/electrospray ionization mass spectrometry

The recent worldwide shortage of acetonitrile has prompted interest in alternative solvents for liquid chromatography/mass spectrometry (LC/MS). In this work, acetone was substituted for acetonitrile in the separation of a peptide mixture by reversed‐phase high‐performance liquid chromatography (RP‐HPLC) and in the positive electrospray ionization mass spectrometry (ESI‐MS) of individual peptides. On both C12 and C18 stationary phases, the substitution of acetone for acetonitrile as the organic component of the mobile phase did not alter the gradient elution order of a five‐peptide retention standard, but did increase peak width, shorten retention times, and increase peak tailing. Positive ESI mass spectra were obtained for angiotensin I, bradykinin, [Leu⁵]‐enkephalin, and somatostatin 14 dissolved in both acetonitrile/water/formic acid (25%/75%/0.1%) and acetone/water/formic acid (25%/75%/0.1%). Under optimized ESI‐MS conditions, the mass spectral response of [Leu⁵]‐enkephalin was increased two‐fold when the solvent contained acetone. The substitution of acetone for acetonitrile resulted in only slight changes in the responses of the remaining peptides. A higher capillary voltage was required for optimum response when acetone was used. Compared with acetonitrile/water/formic acid (50/50/0.1%), more interfering species below m/z = 140 were found in the ESI‐MS spectra of acetone/water/formic acid (50/50/0.1%). Copyright © 2009 John Wiley & Sons, Ltd.     

Organic solvent high-field amplified stacking for basic compounds in capillary electrophoresis

Many water-miscible organic solvents, especially acetonitrile and acetone, bring along significant degrees (approximately 30 times) of stacking by electroinjection through high-field amplified injection for the basic compounds compared to that for aqueous buffers or water. The relative stacking of different compounds in acetonitrile or acetone is different compared to that for water. Stacking by electroinjection in organic solvents is less stringent and easier to accomplish in practice. Acids and salts, in aqueous solutions, can ruin the stacking for both organic and aqueous solvents; however, this effect can be better tolerated by diluting the sample in acetonitrile. Thus, this stacking is termed "organic solvent high-field amplified injection". This stacking by electroinjection is enhanced by increasing the electrophoresis buffer concentration and can be better than that by pressure injection. From the practical aspects, some cationic drugs present in serum such as amiodarone can be detected at the therapeutic levels by electroinjection on the capillary after protein precipitation by acetonitrile.     

Enhanced deep-red luminescence of tris(hexafluoroacetylacetonato)samarium(III) complex with phenanthroline in solution by control of ligand coordination

The effect of solvent molecule on the emission properties of Sm(hfa)3(phen)2 (hfa = hexafluoroacetylacetonato, phen = phenanthoroline) was investigated using acetone, acetonitrile, and pyridine. 5G(5/2) --> 5H(9/2) transition intensities in pyridine were found to be larger than those in corresponding acetone and acetonitrile. The radiative rate constant in pyridine (4.8 x 10(2) s(-1)) was 2 times larger than those in acetonitrile (2.6 x 10(2) s(-1)) and acetone (2.3 x 10(2) s(-1)), although the nonradiative transition via vibrational relaxation (k(nr) = 1.7 x 10(4) s(-1)) in pyridine was the same as those in acetone and acetonitrile (k(nr) = 1.8 x 10(4) s(-1)), resulting in the enhanced emission quantum yield of Sm(III) complex in pyridine (2.7%). The coordination structures of Sm(hfa)3(phen)2 in acetonitrile, acetone, and pyridine were estimated by X-ray single-crystal analyses. These results indicate that enhancement of the emission properties in pyridine is due to faster radiative rate related to formation of asymmetrical nine-coordinated structure, Sm(hfa)3(phen)(py) (py = pyridine).     

Solvatochromism of the π* ← n transition of acetone by combined quantum mechanical—classical mechanical calculations

The solvent shift of the π* ← n transition of acetone in water, acetonitrile, and tetrachloromethane was calculated in a combined quantum mechanical—classical mechanical approach, using both dielectric continuum and explicit, polarizable molecular solvent models. The explicit modeling of solvent polarizability allows for a separate analysis of electrostatic, induction, and dispersion contributions to the shifts. The calculations confirm the qualitative theories about the mechanisms behind the blue shift in polar solvents and the red shift in nonpolar solvents, the solvation of the ground state due to electrostatic interactions being preferential in the former, and favorable dispersion interaction with the excited state, in the latter case. Good quantitative agreement for the solvent shift between experiment (+1,700, +400, and −350 cm⁻¹ in water, acetonitrile, and tetrachloromethane, respectively) and the explicit solvent model (+1,821, +922, and −381 cm⁻¹) was reached through a modest Monte Carlo sampling of the solvent degrees of freedom. A consistent treatment of the solvent could only be realized in the molecular solvent model. The dielectric-only model needs reparameterization for each solvent. © 1996 John Wiley & Sons, Inc.     

杂多阴离子的相转移化学 Ⅰ.取代的Keggin及Dawson结构杂多阴离子在非极性溶剂中的溶剂化行为研究

利用四庚基溴化铵将Keggin结构的杂多阴离子ZW~1~1O~3~9M(H~2O)^n^-(Z=Si,Ge,P,M=Ni^2^+,Cu^2^+,Cr^3^+,Co^2^+,n=4～6)和Dawson结构的杂多阴离子P~2W~1~7O~6~1M(H~2O)^n^-(M=Ni^2^+,Cu^2^+,Cr^3^+,Co^2^+,n=7,8) 从水溶液中转移至非极性溶剂(苯或甲苯)中,并观察到在水溶液中难以进行的配位水的脱去反应,形成配位不饱和的杂多阴离子.当加入Lewis碱如丙酮,吡啶等,可迅速恢复饱和配位,其电子吸收光谱也相应变化,基本恢复到配位饱和时的数值,有ESR信号.实验表明,在非极性溶剂中,配体之间相互进行的取代反应,吡啶的配位能力最强, 发生了取代反应ZW~1~1O~3~9M(L)^n^-+Py→ZW~1~1O~3~9M(Py)^n^-+L(L=丙酮,乙腈等).同时我们也研究了温度,杂多阴离子浓度,惰性气体流量对杂多阴离子在非极性溶剂中的溶剂化行为的影响,得到了相转移的一般规律,为杂多阴离子在非极性溶剂中的催化研究提供了理论依据     

Specific-ion effects in non-aqueous systems

It is widely acknowledged that specific-ion effects are ubiquitous in aqueous systems and undoubtedly are essential to the fundamental processes of life, although a deep fundamental understanding of specific-ion effects remains an important challenge. Specific-ion effects in non-aqueous solvents are known but have attracted far less attention, yet knowledge of specific-ion effects in non-aqueous systems is likely to provide important information for guiding, evaluating and testing our theories of specific-ion effects. Here, the literature on specific-ion effects in non-aqueous solvents is surveyed with a view to determining if the Hofmeister series or lyotropic series so universally observed in aqueous systems is widely evident in non-aqueous systems. Particular attention has been applied to experiments on non-aqueous systems that are known to exhibit Hofmeister series in aqueous systems with the aim of determining if a consistent ion ordering in the strength of specific-ion effects is observed in other solvents. We find that specific-ion effects are ubiquitous in non-aqueous solvents, that both Hofmeister and lyotropic series are widely observed, although not necessarily for the same class of experiment. Moreover, we find that Hofmeister and lyotropic series are observed in non-aqueous solvents even for experiments in which these series are not observed for water. Additionally, series reversal is seen for a given experiment when the solvent is changed. All this poses significant challenges for our understanding of specific-ion effects in aqueous and non-aqueous systems and also provides guideposts for future investigations.     

Solvents and Techniques For The Extraction Of Polynuclear Aromatic Hydrocarbons From Filter Samples Of Diesel Exhaust

Abstract

The amounts of five polynuclear aromatic hydrocarbons-fluoranthene, pyrene, benzo(a)anthracene, benzo(k)fluoranthene, and benzo(a)pyrene-extracted by six solvents with four extraction techniques have been determined for diesel exhaust particulate collected on Teflon-coated glass fiber filters. Samples were analyzed by high pressure liquid chromatography with fluorescence detection. Toluene and methylene chloride gave higher recoveries than methanol, isopropanol, acetonitrile, and acetone for benzo(a)anthracene, benzo(k)fluoranthene, and benzo(a)pyrene. Soxhlet extraction for two hours (approximately 48 cycles) with toluene or acetonitrile was more effective than simple mechanical agitation, ultrasonic agitation for 15 minutes or immersion in refluxing ‘solvent’ for two hours.     

Basicity comparison for di-substituted 4-nitropyridine derivatives in polar non-aqueous media

Acid dissociation, as well as cationic homoconjugation equilibria have been studied potentiometrically in systems involving four di-substituted 4-nitropyridines and conjugate cationic acids in the polar non-aqueous solvents - aprotic protophobic acetonitrile (AN) and propylene carbonate (PC), the amphiprotic methanol (MeOH), and in the aprotic protophilic dimethyl sulfoxide (DMSO). The influence of solvent effect on the obtained acidity constants has been discussed. The acidity constants (expressed as pK_a values) were compared with those previously determined in another polar protophobic aprotic solvent - acetone (AC), and obtained for the unsubstituted pyridine (Py). A comparison of the acid dissociation constants determined in all media studied has proved that the strength of the cationic acids increases on going from acetonitrile through propylene carbonate, acetone, and methanol to dimethyl sulfoxide. Furthermore, the values of acidity constants in the non-aqueous media have shown that in all the solvents studied they change according to the substituent effects. It has been also found that substituted 4-nitropyridine derivatives studied exhibit no tendency towards cationic homoconjugation in acetonitrile, propylene carbonate, and methanol and dimethyl sulfoxide. Moreover, it has been demonstrated that the acid dissociation constants determined by potentiometric titration method in all the solutions investigated correlate well with the calculated energy parameters of the protonation reactions in the gaseous phase.     

Forensic analysis of anthraquinone,azo, and metal complex acid dyes from nylon fibers by micro-extraction and capillary electrophoresis

The extraction and separation of dyes present on textile fibers offers the possibility of enhanced discrimination between forensic trace fiber evidence. An automated liquid sample handling workstation was programmed to deliver varying solvent combinations to acid-dyed nylon samples, and the resulting extracts were analyzed by an ultraviolet/visible microplate reader to evaluate extraction efficiencies at different experimental conditions. Combinatorial experiments using three-component mixture designs varied three solvents (water, pyridine, and aqueous ammonia) and were employed at different extraction temperatures for various extraction durations. The extraction efficiency as a function of the three solvents (pyridine/ammonia/water) was modeled and used to define optimum conditions for the extraction of three subclasses of acid dyes (anthraquinone, azo, and metal complex) from nylon fibers. The capillary electrophoresis analysis of acid dye extracts is demonstrated using an electrolyte solution of 15 mM ammonium acetate in acetonitrile/water (40:60, v/v) at pH 9.3. Excellent separations and discriminating diode array spectra are obtained even for dyes of similar color. Figure Capillary electropherogram of three acid dyes extracted from nylon 6,6 thread