Electrochemical reduction of Bi2Sr2Ca1Cu2O8 superconductor single crystals

Single crystals and polycrystalline pellets of the high-temperature cuprate superconductor Bi₂Sr₂Ca₁Cu₂O₈ were doped at room temperature by electrochemical reduction at > 95% Coulombic efficiency using lithium dopant ions in propylene carbonate electrolyte. Cyclic voltammetry and potential step measurements on single crystals suggest an unusual reduction mechanism, with a diffusion coefficient for Li⁺ in the c-axis direction of bulk superconductor of ca. 3 × 10⁻¹¹ cm²s⁻¹. Sintered pellets of polycrystalline powder could be doped more rapidly, with an apparent diffusion coefficient of 7 × 10⁻⁸ cm²s⁻¹. X-ray susceptibility analysis show extensive disordering occurs on heavy Li doping, with a first-order transition from a crystalline/superconducting to an amorphous/non-superconducting phase. Single, crystals of Bi₂Sr₂Ca₁Cu₂O₈ exhibited a color change on reduction from metallic gray to golden bronze. The reduced material was highly air-sensitive, forming a hydroxide surface film on exposure to ambient atmosphere.     

Effect of branching in base polymer on ionic conductivity in hyperbranched polymer electrolytes

Novel hyperbranched polymer, poly[bis(diethylene glycol)benzoate] capped with a 3,5-bis[(3′,6′,9′-trioxodecyl)oxy]benzoyl group (poly-Bz1a), was prepared, and its polymer electrolyte with LiN(CF₃SO₂)₂, poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte, was all evaluated in thermal properties, ionic conductivity, and electrochemical stability window. The poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte exhibited higher ionic conductivity compared with a polymer electrolyte based on poly[bis(diethylene glycol)benzoate] capped with an acetyl group (poly-Ac1a), and the ionic conductivity of poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte was to be 7×10⁻⁴ S cm⁻¹ at 80 °C and 1×10⁻⁶ S cm⁻¹ at 30 °C, respectively. The existence of a 3,5-bis[(3′,6′,9′-trioxodecyl)oxy]benzoyl group as a branching unit present at ends in the base polymer improved significantly ionic conductivity of the hyperbranched polymer electrolytes. The polymer electrolyte exhibited the electrochemical stability window of 4.2 V at 70 °C and was stable until 300 °C.     

Band structures and proton-neutron interactions in Ta

Six rotational bands in the odd-odd nucleus ¹⁷⁴Ta have been populated with the ¹⁶⁰Gd(¹⁹F,5n) reaction. High-spin states were identified using the NORDBALL array. Both signatures of the doubly decoupled π1/2⁻ [541] ν1/2⁻ [521] band and semi-decoupled π1/2⁻ [541] ν7/2⁻ [633] band are observed, in addition to the high-K couplings of the π9/2⁻ [514] ν7/2⁺ [633], π9/2⁻ [514] ν5/2⁻ [512], π7/2⁺ [404] ν7/2⁺ [633], and π5/2⁺ [402] ν5/2⁻ [512] configurations. The signature splitting of the π1/2⁻ [541] ν7/2⁺ [633] band is inverted from the expected splitting, and this is interpreted as being due to a residual proton-neutron interaction. It is shown empirically that this interaction, together with deformation changes, can account for the increased crossing frequency associated with the alignment of i_13/2 neutrons in the π1/2⁻ [541] bands of odd-Z nuclei.     

Structural and lithium intercalation studies of Mn(0.5−x)CaxTi2(PO4)3 phases (0≤x≤0.50)

Materials from the Mn_(0.5−x)Ca_xTi₂(PO₄)₃ (0≤x≤0.50) solid solution were obtained by solid-state reaction in air at 1000 °C. Selected compositions were investigated by powder X-ray diffraction analysis, ³¹P nuclear magnetic resonance (NMR) spectroscopy and electrochemical lithium intercalation. The structure of all samples determined by Rietveld analysis is of the Nasicon type with the R space group. Mn²⁺/Ca²⁺ ions occupy only the M1 sites in the Ti₂(PO₄)₃ framework. The divalent cations are ordered in one of two M1 sites, except for the Mn_0.50Ti₂(PO₄)₃ phase, where a small departure from the ideal order is observed by XRD and ³¹P MAS NMR. The electrochemical behaviour of Mn_0.50Ti₂(PO₄)₃ and Mn_(0.5−x)Ca_xTi₂(PO₄)₃ phases was characterised in Li cells. Two Li ions can be inserted without altering the Ti₂(PO₄)₃ framework. In the 0≤y≤2 range, the OCV curves of Li//Li_yMn_0.50Ti₂(PO₄)₃ cells show two main potential plateaus at 2.90 and 2.50–2.30 V. Comparison between the OCV curves of Li//Li_(1+y)Ti₂(PO₄)₃ and Li//Li_yMn_0.50Ti₂(PO₄)₃ shows that the intercalation occurs first in the unoccupied M1 site of Mn_0.50Ti₂(PO₄)₃ at 2.90 V and then, for compositions y>0.50, at the M2 site (2.50–2.30 V voltage range). The effect of calcium substitution in Mn_0.50Ti₂(PO₄)₃ on the lithium intercalation is also discussed from a structural and kinetic viewpoint. In all systems, the lithium intercalation is associated with a redistribution of the divalent cation over all M1 sites. In the case of Mn_0.50Ti₂(PO₄)₃, the stability of Mn²⁺ either in an octahedral or tetrahedral environment facilitates cationic migration.     

Comblike polymer electrolyte with main chain glass transition near room temperature

A new amorphous comblike polymer (CBP) based on methylvinyl ether/maleic anhydride altering copolymer backbone and on oligooxyethylene side chain was synthesized. The dynamic mechanical properties of CBP and its Li salt complexes were investigated by means of DDV-ll-EA type viscoelastic spectrometry. Results showed that there were two glass transitions (-transition and β-transition) in the temperature range from − 100 to 100 °C. The β-transition was assigned to oligo-PEO side chains and the temperature of β-transition increases with increasing Li salt content. The -transition was assigned to the main chain of CBP. The temperature of the -transition (T) is also dependent upon the Li-salt content, but not monotonie. The value of T lies between 30–45 °C in the Li salt concentration range studied, near room temperature. It was found that the CBP-Li salt complexes showed an unusual dependence of ionic conductivity on Li salt content. There are two peaks in the plot of the ionic conductivity vs. Li salt concentration, which has been ascribed to the movability of the CBP main chain at ambient temperature. The temperature dependence of the ionic conductivity indicated that the Arrhenius relationship was not obeyed, and the plot of log σ against 1/(T − T₀) showed the unusual dual VTF behavior when using side chain glass transition temperature (T_β) as T₀.     

Lithium scandium phosphate-based electrolytes for solid state lithium rechargeable microbatteries

Li₃Sc₂(PO₄)₃ is a promising candidate for use as an electrolyte in solid state lithium rechargeable microbatteries due to its stability in air, ease of preparation, and resistance to dielectric breakdown. The room temperature ionic conductivity was optimized resulting in an increase of over two orders of magnitude to 3×10⁻⁶S/cm. The formation of Li₃(Sc_2−xM_x)(PO₄)₃, where M=Al³⁺ or Y³⁺, resulted in the decrease of porosity, greater sinterability, and considerable enhancement of the ionic conductivity. Yttrium substitutions enhanced the conductivity slightly while aluminum increased the room temperature ionic conductivity to 1.5×10⁻⁵S/cm for x=0.4. Preliminary electron beam evaporation of Li₃Sc₂(PO₄)₃ yielded amorphous thin films with ion ic conductivity as high as 5×10⁻⁵S/cm and a composition of Li_4.8Sc_1.4(PO₄)₃.     

Studies of lithium intercalation in 3R-WS2

The lithium intercalation into the layered dichalcogenide 3R-WS₂ has been investigated by electrochemical reduction and by chemical reaction in n-butyl lithium solution. Essential results are (a) a charge transfer of nearly 0.6e⁻/W in Li_xWS₂, (b) a small increase of the c-axis parameter of about 0.6%, and (c) a high mobility of the Li⁺-ions. The chemical diffusion coefficient of Li⁺-ions is estimated to be 8 × 10⁻⁹ cm² s⁻¹ in the composition range 0 ≤ x ≤ 0.25. The appearance of a structural transformation from 3R-WS₂ to 2H-Li_xWS₂ is interpreted on grounds of instabilities in the interlayer structure.     

The role of Sb(5+) in the structure of Sb(2)O(3)-B(2)O(3) binary glasses--an NMR and Mössbauer spectroscopy study

Glasses of general formula xSb₂O₃ (1−x)B₂O₃ (0x0.8) have been prepared by conventional melt- quenching. Mössbauer spectroscopy shows that a fraction of the Sb³⁺ is converted to Sb⁵⁺ and this fraction increases with x. High-field ¹¹B MAS NMR gives well-resolved resonances from boron atoms which are 3- and 4-coordinated to oxygen. The fraction of 4-coordinated boron, N₄, goes through a maximum value of 0.12±0.01 at x=0.5. The position of the maximum in N₄ is consistent with the cation potential for Sb³⁺, as observed for other systems. However, the low value of N₄ at this maximum is not so readily explained. The values are similar to those predicted if [BO₄]⁻ were stabilised by [SbO₄]⁺ but the trends with composition are different.     

Preparation and characterization of a lithium ion conducting electrolyte based on poly(trimethylene carbonate)

In this paper, the results of preliminary studies of two new solvent-free polymer electrolytes based on poly(trimethylene carbonate), p(TMC), with lithium trifluoromethanesulphonate, (triflate), and lithium perchlorate are described. Thin films of these electrolytes were obtained by evaporation of solvent from homogeneous mixtures of known masses of host polymer and salt. Electrolytes with compositions of n between 1.5 and 85, where n represents the molar ratio of (O=COCH₂CH₂CH₂O) units per lithium ion, have been prepared. These solvent-free electrolytes were characterized by measurements of total ionic conductivity, differential scanning calorimetry (DSC) and thermogravimetry (TGA). As expected from previous studies with these salts in poly(ethylene oxide), PEO, the triflate-based system showed superior thermal stability but with a lower total ionic conductivity than that of the perchlorate-containing electrolyte. The highest conductivity (approximately 3×10⁻⁴ Ω⁻¹ cm⁻¹) was found at 95°C with the electrolyte composition of (TMC)₂LiClO₄.     

A new 9 K superconducting organic salt composed of the bis (ethylenedithio) tetrathiafulvalene (ET) electron-donor molecule and the tetrakis (trifluoromethyl) cuprate (III) anion, [Cu(CF3)4]

We report the discovery of a second, higher-T_c superconducting organic charge-transfer salt derived from the electron-donor molecule BEDT-TTF (or ET), the novel organometallic anion [Cu(CF₃)₄]⁻, and the neutral solvent molecule 1, 1, 2-trichloroethane (TCE). We have very recently reported that this charge-transfer system yields a new superconducting phase salt, _L- (ET)₂Cu(CF₃)₄·TCE, with inductive onset T_crmc=4.0 K at ambient pressure. This phase salt ( denotes a particular packing arrangement of the ET organic donor molecules) is electrocrystallized in the habit of hexagonal plates. Crystals possessing a needle-like habit electrocrystallize simultaneously with these plates, and we find these needles to be a distinctly different superconducting phase with diamagnetic onset T_c=9.2±0.1 K at ambient pressure. On the basis of our experiments, we denote this new superconducting phase as _H−(ET)₂Cu(CF₃)₄·(TCE)_x,X<1.     

Impedance studies on polyacrylonitrile–CuX2–DMSO (X=Cl, Br, CF3SO3) solid polymer electrolyte

A series of polyacrylonitrile–dimethylsulfoxide–CuX₂ (X=CF₃SO₃⁻, Cl⁻, Br⁻), films (foils) were prepared by means of the solution cast technique. The thickness of the foils was between 0.04 and 0.09 cm and they contained 70–80 wt.% of the solvent. Conductivities of the solid electrolytes were obtained from impedance measurements. The conductivity increases with the increase of the salt content up to 8 wt.%; at higher concentrations (>8 wt.%) the conductivity is more or less stable, and reaches, in the case of Cu(CF₃SO₃)₂ and CuCl₂, the level of ca. 10⁻³ Ω⁻¹ cm⁻¹ at room temperature. The foils based on the CuBr₂ show even higher conductivity, close to 10⁻² Ω⁻¹ cm⁻¹ at room temperature, a value comparable to that characteristic for liquid solutions. The temperature variation of the conductivity for all the systems studied is of the Arrhenius type. The activation energy, determined from linear plots lnσ=f(T⁻¹), is of the order ca. 14 kJ mol⁻¹ for the PAN/CuBr₂/DMSO and of ca. 21 kJ mol⁻¹ for the PAN/CuCl₂/DMSO and the PAN/Cu(CF₃SO₃)₂/DMSO systems.     

Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition

Polycrystalline (1−x)Ta₂O₅−xTiO₂ thin films were formed on Si by metalorganic decomposition (MOD) and annealed at various temperatures. As-deposited films were in the amorphous state and were completely transformed to crystalline after annealing above 600 °C. During crystallization, a thin interfacial SiO₂ layer was formed at the (1−x)Ta₂O₅−xTiO₂/Si interface. Thin films with 0.92Ta₂O₅–0.08TiO₂ composition exhibited superior insulating properties. The measured dielectric constant and dissipation factor at 1 MHz were 9 and 0.015, respectively, for films annealed at 900 °C. The interface trap density was 2.5×10¹¹ cm⁻² eV⁻¹, and flatband voltage was −0.38 V. A charge storage density of 22.8 fC/μm² was obtained at an applied electric field of 3 MV/cm. The leakage current density was lower than 4×10⁻⁹ A/cm² up to an applied electric field of 6 MV/cm.     

High temperature transport processes in lithium niobate

The electrical conductivity of single crystal lithium niobate (LiNbO₃) was determined as a function of temperature for various oxygen partial pressures. The electrical conductivity is proportional to P_o2^−1/4 which can be explained by a defect equilibrium involving singly ionized oxygen vacancies and electrons.

Measurements of electrical transport numbers at 1000°K show the electrical conductivity of LiNbO₃ to be ionic at one atmosphere of oxygen and electronic at low oxygen partial pressures.

Thermoelectric measurements indicate that LiNbO₃ at low oxygen partial pressures is n-type and that the concentration of electrons at 1000°K and in an atmosphere of 50% C0/50% CO₂a is 4 × 10¹⁷cm³ with a mobility of 1.7 cm²V sec.

The diffusion of oxygen in LiNbO₃ was determined as a function of temperature at an oxygen partial pressure of 70 Torr. by measuring O¹⁸/O¹⁶ isotope exchange with the gas phase as a function of time. The diffusion data may be represented by D = 3.03 × 10⁻⁶ exp (−29.4 kcal mole⁻¹/RT)cm²sec. Consideration of the Nernst-Einstein relation for oxygen and the variation in conductivity with Li₂O activity indicate that the ionic conduction is caused by transport of lithium ions.     

Poly(ethylene oxide-co-epichlorohydrin)/NaI: a promising polymer electrolyte for photoelectrochemical cells

We have investigated the thermal and ionic conductivity properties of the elastomer poly(ethylene oxide-co-epichlorohydrin) filled with NaI and I₂. The reason for using this composition is its potential application as electrolyte in photoelectrochemical cells. This copolymer was characterized as a function of NaI concentration, temperature and relative humidity. According to the data obtained, the Na⁺ ion interacts with the ethylene oxide repeating units by means of Lewis type acid–base interactions. The empirical Vogel–Tamman–Fulcher equation was used to model the conductivity and temperature relationships, indicating that the conduction occurs in the amorphous phase of the copolymer. The sample with 9.0% (w/w) of NaI presents a conductivity of 1.5×10⁻⁵ S cm⁻¹ in a dry atmosphere (30°C, [H₂O]<1 ppm) and 2.0×10⁻⁴ S cm⁻¹ at 86% relative humidity (22°C).     

The effect of oxygen vacancy on the oxide ion mobility in LaAlO3-based oxides

The electrical property of (La_1−xSr_x)_1−z(Al_1−yMg_y)O_3−δ (LSAM; x≤0.3, y≤0.15 and z≤0.1) was measured using the DC four-probe method as a function of temperature (500–1000°C) and oxygen partial pressure (1–10⁻²² atm). Among LSAMs, (La_0.9Sr_0.1)AlO_3−δ showed the highest ionic conductivity, σ_i=1.3×10⁻² S cm⁻¹ at 900°C. A simultaneous substitution at A and B sites or A site deficiency is expected to create larger oxygen vacancy and higher ionic conductivity. However, it showed a negative effect. The effect of the vacancy increase did not effect monotonously the ionic conductivity. It was found that the concentration of oxygen vacancy, [V_O], influences not only the oxide ion conductivity, σ_i, but also the mobility, μ_v, of [V_O]. These properties exhibit a maximum at around [V_O]=0.05. With the increase in [V_O], the activation energy, E_a, of the ionic conduction dropped from 1.8 to ca. 1.0 eV at [V_O]=0.05 and became almost constant at [V_O]>0.05. The dependency of the pre-exponential term, μ⁰_v, and E_a on [V_O] was analyzed and their effect on μ_v and σ_i was discussed with respect to crystal structure and defect association. It was estimated that the crystal structure mainly governs these properties. The effect of defect association could not be ignored but is considered to be a complicated correlation.     

Diffusion of W on A W(211) plane

The diffusion of W on a (211) plane of a W field emitter has been re-examined by means of the fluctuation autocorrelation method. Diffusion along channels yielded E = 16.8 ± 0.5 kcal, D₀ = (3 ± 1) × 10⁻⁵ cm² s⁻¹. For diffusion across channels E =6.6 kcal, D₀ = 4 × 10⁻⁹cm² s⁻¹ at T < 752 K, and E = 24 kcal, D₀ = 5 × 10⁻⁴ cm² s⁻¹ at T > 752 K. The results for diffusion along channels yield E and D₀ values intermediate between recent results by Wang and Ehrlich [Surf. Sci. 206 (1988) 451] using field ion microscopy (E = 19 kcal, D₀ = 7.7 × 10⁻³ cm² s⁻¹) and Tringides and Gomer [J. Chem. Phys. 84 (1986) 4049], using the same method as the present work but a larger slit (E = 13.3 kcal, D₀ = 7 × 10⁻⁷ cm² s⁻¹). The results for cross channel diffus good agreement with those of Tringides and Gomer below 752 K, where these authors stopped. The new high temperature results suggest that the channel wall exchange mechanism postulated by Tringides and Gomer for cross channel diffusion at low T gives way to diffusion by climbing over the channel walls with higher E but also higher D₀ above 752 K. Possible reasons for the discrepancies between these three sets of results and the absence of cross channel diffusion in the work of Wang and Ehrlich are briefly discussed.     

Conductivity anisotropy in directionally solidified CaZrO3---CaSZ and MgO-MgSZ eutectics

The results of the impedance spectroscopy measurements on eutectic samples based on zirconium oxide are presented here. Samples of CaZrO₃---ZrO₂(cubic) and MgO---ZrO₂(cubic) have been grown by a directional solidification procedure such that the different phases appear nearly oriented along the growth direction (lamellae in the system of CaZrO₃-ZrO₂(cubic) and fibers of MgO in a ZrO₂ matrix in the other system). The DC electrical conductivity has been measured by impedance spectroscopy along and across the growth axis. For CaZrO₃---ZrO₂ the coductivity is clearly anisotropic. The following values for σT have been obtained: the conductivity at 600 °C equals 2.0 × 10⁻⁶ Ω⁻¹ cm⁻¹ perpendicular to the fiber axis and 1.4 × 10⁻⁵ Ω⁻¹ cm⁻¹ parallel to it and with an activation energy of 1.3 eV for σT. For MgO---ZrO₂(cubic) the isotropic value of the conductivity at 600 °C is 10⁻⁴ Ω⁻¹ cm⁻¹ with activation energy for σT of 1.5 eV. The anisotropic conductivity in the CaZrO₃---ZrO₂ (cubic) system has been explained by a model of an ordered stacking of oxygen conducting (cubic ZrO₂) and non-conducting (CaZrO₃ or MgO) phases.     

Lithium insertion to ReO3-type metastable phase in the Nb2O5–WO3 system

Lithium insertion to distorted ReO₃-type metastable solid solution Nb_xW_1−xO_3−x/2 (0≤x<0.25) has been studied by chemical and electrochemical methods. In the course of lithium insertion into tetragonal compounds, transition to a cubic phase was found to occur in the region where values of y (in Li_yNb_xW_1−xO_3−x/2) fall between 0.2 and 0.3, and the phase transition was found to depend on the conditions of the reaction. Changes in OCV and lattice parameters in tetragonal region (y<0.2) were discussed from the viewpoint of the ordering of lithium ions. Also, the component diffusion coefficient of lithium in tetragonal compounds Li_0.1Nb_xW_1−xO_3−x/2 (0≤x≤0.23) was found to increase with niobium content when x≤0.10, and to saturate at 4×10⁻⁹ cm²/s.     

An electrochemical investigation of Li intercalation in the sol-gel LiMn2O4 spinel oxide

An alternative approach for obtaining the LiMn₂O₄ spinel phase is provided by the use of the sol-gel method in aqueous solution. The main electrochemical properties of the sol-gel LiMn₂O₄ phase are reported. In addition to chronopotentiometric and voltammetric experiments, the kinetics of the electrochemical insertion–extraction of lithium in Li_xMn₂O₄ (0.25<x<1) has been investigated using ac impedance spectroscopy. The strong variation of the chemical diffusion coefficient D_Li vs x, in the range 10⁻⁸–10⁻¹¹ cm² s⁻¹ (D_Li is found to be maximum for x=0.55) is critically discussed.     

Positivity of energy in five dimensional classical unified field theories, II

Five dimensional classical unified field theories as well as Yang-Mills theory with gauge group U(1), are described in terms of a Lorentzian five dimensional space V₅ with metric tensor γβ which admits a space-like Killing vector ζ. It is assumed that: (1) V₅ has the topology of V₄ x S¹, S¹ is a circle and V₄ is a four dimensional Lorentzian space that is asymptotically flat and (2) the Einstein tensor Γ_β of V₅ satisfies Γ_β Uυ^{β 0} where U and υ are future oriented time-like vectors with γ_βυζ^β = 0. The spinor approach of Witten [4], Nester [3] and Moreschi and Sparling [5] is used to show that the conserved five dimensional energymomentum vector P = ifΓ_β = 0 then V₅ must admit a time-like Killing vector. Lichnerowicz's results [1] then imply that V₅ must be flat. A lower bound for P⁴ (the mass) similar to that found by Gibbons and Hull [6] is obtained.