Influence of partial substitution of zinc for copper on electronic structures of YBa2Cu3O y

Summary By use of an approximate band-structure treatment based on the EHMO approach, the energy band structures for the Zn-doped superconductor YBa₂Cu_3–x Zn _x O _y were calculated in the present paper and the influence of partial substitution of zinc for copper on the electronic structures for orthorhombic YBa₂Cu₃O_y was studied. From analysis of the band structures and the densities of states for YBa₂Cu_3–x Zn _x O _y , it was demonstrated that the 2D Cu-O planes in the Y-Ba-Cu-O superconducting system have a direct and dominant influence on superconductivity, whereas the role of the 1D Cu-O ribbons and the O(4) atoms is also of some importance.     

Synthesis and ac susceptibility of YCa2Cu3O7−δ

The bulk superconducting YCa₂Cu₃O_7−δ compounds are prepared at an ordinary pressure of oxygen by conventional solid-state reaction method. The formation of sample is tested by means of XRD and is studied for their ac susceptibility below room temperature up to 77.5 K. The samples are found single-phase orthorhombic structure and found superconducting at 83.5 K. It is shown that the analysis is consistent with published data on YBa₂Cu₃O_7−δ oxide superconductor.     

尖晶石型LiMn2-xInxO4(x=0，0.01，0.02，0.05)的合成及电化学性能研究

以醋酸锰、氢氧化锂和三氧化二铟为原料,以柠檬酸为配位剂,采用溶胶-凝胶法制备了掺杂In的尖晶石LiMn2-xInxO4(x=0,0.01,0.02,0.05),采用XRD、SEM对目标材料进行了结构和形貌表征,采用恒流充放电、循环伏安(CV)以及交流阻抗(EIS)谱测试对材料进行了电化学性能表征,考察了不同In掺杂量对材料性能的影响。结果表明,当In掺杂量为1%时,LiMn1.99In0.01O4样品具有纯的尖晶石锰酸锂结构,在0.5C和3.4～4.35 V电压范围条件下,LiMn1.99In0.01O4的初始放电容量为119.9 mAh.g-1,经过1C 30次,2C 30次,再0.5C 5次循环后,其放电容量保持率为84.9%,显示了良好的电化学性能。掺杂1%的In的样品比未掺杂的样品具有更优的高温循环稳定性能。     

Electrochemical synthesis of Fe3O4-PB nanoparticles with core-shell structure and its electrocatalytic reduction toward H2O2

The Fe₃O₄-Prussian blue (PB) nanoparticles with core-shell structure have been in situ prepared directly on a nano-Fe₃O₄-modified glassy carbon electrode by cyclic voltammetry (CV). First, the magnetic nano-Fe₃O₄ particles were synthesized and characterized by X-ray diffraction. Then, the properties of the Fe₃O₄-PB nanoparticles were characterized by CV, electrochemical impedance spectroscopy, and superconducting quantum interference device. The resulting core-shell Fe₃O₄-PB-modified electrode displays a dramatic electrocatalytic ability toward H₂O₂ reduction, and the catalytic current was a linear function with the concentration of H₂O₂ in the range of 1 × 10⁻⁷~5 × 10⁻⁴ mol/l. A detection limit of 2 × 10⁻⁸ (s/n = 3) was determined. Moreover, it showed good reproducibility, enhanced long-term stability, and potential applications in fields of magnetite biosensors.     

Interaction Between Two Similar Plane Parallel Double Layers for (NH4)2Fe(SO4)2 or (NH4)2Cu(SO4)2 Type Complex Salt Electrolytes at Positive Surface Potential

Interaction energies between two similar plane parallel double layers for (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ type complex salt electrolytes at positive surface potential were expanded in a power series and accurate numeral results were given for 0.1 ≤ y _e  < y ₀ ≤ 20. The general expressions were given for the interaction energies of A _ν +B _ν′ +C_ν? type complex salt electrolytes at y > 0. The interaction energies for simple salts NaCl, CaCl₂, Na₂SO₄, FeCl₃, Na₃PO₄, Mg₃(PO₄)₂, Al₂(SO₄)₃, and complex salts (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ at y ₀ = 1 were compared. There was hardly difference between these simple salts and this complex salt for the interaction energies. The interaction energy for complex salt (NH₄)₂Fe(SO₄)₂ was close to that for simple salt Na₃PO₄.

Supplemental files are available for this article. Go to the publisher's online edition of the Journal of Dispersion Science and Technology to view the free supplemental file.     

Efficient and scalable process for the synthesis of antihypercholesterolemic drug ezetimibe

An efficient and scalable process for the synthesis of antihypercholesterolemic drug ezetimibe through chiral Evans auxiliary (S)-4-phenyl-2-oxazolidinone is described. The key steps in this process are the condensation of (S)-3-(5-(4-fluorophenyl)-5,5-dimethoxypentanoyl)-4-phenyloxazolidin-2-one and N-(4-((tert-butyldimethylsilyl)oxy)benzylidene)-4-fluoroaniline, and the stereoselective reduction of ezetimibe-ketone with NaBH₄/I₂, which is first applied in the synthesis of ezetimibe. The process is concise, mild, easy to operate, and highly stereoselective (99.6% of de value of ezetimibe). In addition, three diastereomers of ezetimibe are synthesized and served as the references in quality control of the product.     

Ti掺杂的MgH2和Mg2NiH4的放氢性能

以TiF₃和Ti(OBu-n)₄为催化剂, 研究了Ti离子掺杂对MgH₂和Mg₂NiH₄放氢性能的影响. 结果表明, 未掺杂的MgH₂起始放氢温度为420 ℃, 掺杂TiF₃和Ti(OBu-n)₄后分别降低到360和410 ℃; Mg₂NiH₄在掺杂TiF₃后放氢温度由230 ℃降低到220 ℃, 而掺杂Ti(OBu-n)₄后没有变化. 可见无论对MgH₂或Mg₂NiH₄, 在降低放氢温度方面TiF₃都明显优于Ti(OBu-n)₄. 另外, 研究还发现, TiF₃掺杂对MgH₂放氢动力学有显著的提高, 但对Mg₂NiH₄没有明显的提高. 结合XRD和FTIR的测试分析, 我们认为: 催化作用很大程度上取决于氢化物自身的晶体结构和催化剂的电子结构; 降低氢化物放氢温度和提高动力学性能的原因是催化剂与氢化物之间的相互作用削弱了氢化物中Mg—H或Ni—H键, 使得活泼的H…H原子对容易形成, 从而有利于H₂的释出.     

Electrochemical reduction of NO on La2-x Sr x NiO4 based electrodes

The series La_2 − x Sr _x NiO₄ (x = 0.0, 0.05, 0.15, 0.25, 0.35, and 1.0) was tested for functionality as electrode materials for direct electrochemical reduction of NO. The materials were tested using cyclic voltammetry in 1% NO and 10% O₂ in Ar on a cone-shaped electrode. The best materials for the electrochemical reduction of NO are La₂NiO₄ and LaSrNiO₄, which have current densities for NO reduction 1.82 and 7.09 times higher, respectively, than for O₂ at 400 °C. Increasing the temperature decreased the ability to reduce NO before O₂ while the activity increased. The adsorbed species during direct decomposition was attempted, clarified using X-ray absorption near-edge structure experiments and thermogravimetry, but no conclusive results were obtained.     

低温合成超导体Ba1-xKxBiO3

先以BaCO₃和Bi₂O₃为原料由传统的固相反应制备纯BaBiO₃,然后在低温下将用KOH-KF熔盐处理这样的拓扑反应合成了Ba_1-xK_xBiO₃超导体. 所有样品均进行了粉末X射线衍射（XRD）和磁性表征. XRD结果表明,所得Ba_1-xK_xBiO₃样品均为纯相,且均可用赝立方晶胞指标化. 磁性测量表明所有样品具有超导电性,最高超导转变温度（T_c）为30.6 K. 讨论了反应时间、前驱体与熔盐质量比对超导转变温度的影响. 最佳的反应条件为：反应温度450 ℃,反应时间4 h,BaBiO₃：KOH：KF质量比1：5：2.5.     

Vibrational frequencies and force constants of N2O4 in complexes with molecules of different solvents determined by Raman spectra andAb initio calculation

The Raman spectra of N₂O₄ solutions in organic solvents have been recorded. The frequencies ofv ₁,v ₂, andv ₃ bands of N₂O₄ increase with increasing solvent electron-donor properties. Especially large changes ofv ₃ N-N stretching band have been observed (254.5 cm^–1 in n-hexane, 276.5 cm^–1 in 1,4-dioxane). The ab initio calculations have shown that the interaction between N₂O₄ and electron-donor molecules causes an increase of N-N and N-O stretching and O-N-O bending force constants of N₂O₄ in agreement with the results of Raman study.     

Supramolecular aggregation in new crystals with nonlinear optical properties: 2-aminophenol-HClO4, 3-aminophenol-HClO4 and 4-aminophenol-HClO4

Three new hybrid crystals of 2-aminophenol-HClO₄ (2-AP-HClO₄, 1), 3-aminophenol-HClO₄ (3-AP-HClO₄, 2) and 4-aminophenol-HClO₄ (4-AP-HClO₄, 3) were obtained and their crystal structures determined. The 1 crystallises in centrosymmetric space group C2/c of monoclinic system while the other two (2 and 3) crystallise in the non-centro symmetric space group P2₁ and P2₁2₁2₁, respectively. The oppositely charged units of the crystals, i.e. positively charged 2-APH⁺, 3-APH⁺ and 4-APH⁺ and ClO₄⁻, interact via weak N⁺–HO and O–HO hydrogen bonds forming 3D-supramolecular network. Relative to KDP the SHG efficiencies are 0.62 for 2 and 0.33 for 3, measured at 1064 nm using the Kurtz–Perry method.     

The superconductor system of 2H-Tantalum disulfide intercalated with polyglycine

It was hypothesized that the formation of polypeptide bonds inside a lamellar superconducting compound such as 2H-TaS₂ could enhance the superconducting transition temperature. The preparation of tantalum disulfide intercalated with polyglycine is described. The intercalated systems were characterized by powder X-ray diffraction and thermogravimetric analysis. Superconducting transition temperatures were also measured. The results show that the system 2H-TaS₂/polyglycine does not have a more favourableT _cvalue than 2H-TaS₂/glycine.     

NiFe2O4/T-ZnOw复合材料的制备及电磁波吸收性能

采用铁氧体化学镀在四角氧化锌晶须(T-ZnOw)表面包覆NiFe2O4镀层,制备了NiFe2O4/T-ZnOw复合材料。利用X射线衍射仪、扫描电镜、能谱分析仪对镀覆前后T-ZnOw的结构、形貌等进行了表征。利用矢量网络分析仪研究了NiFe2O4/T-ZnOw复合材料的电磁波吸收性能。结果表明,化学镀覆后,在T-ZnOw表面包覆了尖晶石型NiFe2O4镀层,生成了NiFe2O4/T-ZnOw复合材料,该材料为磁损耗型材料。化学镀覆过程中T-ZnOw的装载量会影响复合材料的介电常数和磁导率,当T-ZnOw装载量为0.2g时,所制备的复合材料具有最大的介电常数、磁导率、介电损耗和磁损耗,当吸收层厚度达到3 mm时,反射率在14 GHz处达到-11 dB。     

On the crystal chemistry of three copper(II)-arsenates: Cu3(AsO4)2-III,Na4Cu(AsO4)2, and KCu4(AsO4)3

The three copper(II)-arsenates were synthesized under hydrothermal conditions; their crystal structures were determined by single-crystal X-ray diffraction methods:Cu₃(AsO₄)₂-III:a=5.046(2) Å,b=5.417(2) Å,c=6.354(2) Å, =70.61(2)°, =86.52(2)°, =68.43(2)°,Z=1, space group ,R=0.035 for 1674 reflections with sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a=4.882(2) Å,b=5.870(2) Å,c=6.958(3) Å, =98.51(2)°, =90.76(2)°, =105.97(2)°,Z=1, space group ,R=0.028 for 2157 reflections with sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a=12.234(5) Å,b=12.438(5) Å,c=7.307(3) Å, =118.17(2)°,Z=4, space group C2/c,R=0.029 for 1896 reflections with sin / 0.80 Å^–1.Within these three compounds the Cu atoms are square planar [4], tetragonal pyramidal [4+1], and tetragonal bipyramidal [4+2] coordinated by O atoms; an exception is the Cu(2)^[4+1] atom in Cu₃(AsO₄)₂-III: the coordination polyhedron is a representative for the transition from a tetragonal pyramid towards a trigonal bipyramid. In KCu₄(AsO₄)₃ the Cu(1)^[4]O₄ square and the As(1)O₄ tetrahedron share a common O—O edge of 2.428(5) Å, resulting in distortions of both the CuO₄ square and the AsO₄ tetrahedron. The two Na atoms in Na₄Cu(AsO₄)₂ are [6] coordinated, the K atom in KCu₄(AsO₄)₃ is [8] coordinated by O atoms.Die drei Kupfer(II)-Arsenate wurden unter Hydrothermalbedingungen gezüchtet und ihre Kristallstrukturen mittels Einkristall-Röntgenbeugungsmethoden ermittelt:Cu₃(AsO₄)₂-III:a = 5.046(2) Å,b = 5.417(2) Å,c = 6.354(2) Å, = 70.61 (2)°, = 86.52(2)°, = 68.43(2)°,Z = 1, Raumgruppe ,R = 0.035 für 1674 Reflexe mit sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a = 4.882(2) Å,b = 5.870(2) Å,c = 6.958(3) Å, = 98.51(2)°, = 90.76(2)°, = 105.97(2)°,Z = 1, Raumgruppe ,R = 0.028 für 2157 Reflexe mit sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a = 12.234(5) Å,b = 12.438(5) Å,c = 7.307(3) Å, = 118.17(2)°,Z = 4, Raumgruppe C2/c,R = 0.029 für 1896 Reflexe mit sin / 0.80 Å^–1.Die Cu-Atome in diesen drei Verbindungen sind durch O-Atome quadratisch planar [4], tetragonal pyramidal [4 + 1] und tetragonal dipyramidal [4 + 2]-koordiniert; eine Ausnahme ist das Cu(2)^{[4 + 1]}-Atom in Cu₃(AsO₄)₂-III: Das Koordinationspolyeder stellt einen Vertreter des Übergangs von einer tetragonalen Pyramide zu einer trigonalen Dipyramide dar. In KCu₄(AsO₄)₃ haben das Cu(1)^[4]O₄-Quadrat und das As(1)O₄-Tetraeder eine gemeinsame O—O-Kante von 2.428(5) Å, was eine Verzerrung der beiden Koordinationsfiguren CuO₄-Quadrat und AsO₄-Tetraeder bedingt. Die zwei Na-Atome in Na₄Cu(AsO₄)₃ sind durch O-Atome [6]-koordiniert, das K-Atom in KCu₄(AsO₄)₃ ist [8]-koordiniert.

---

Zur Kristallchemie dreier Kupfer (II)-Arsenate: Cu₃(AsO₄)₂-III, Na₄Cu(AsO₄)₂ und KCu₄(AsO₄)₃

     

Comparative computational investigation of N and F substituted polyoxoanionic compounds: The case of Li2FeSiO4 electrode material

First principles calculations are used to anticipate the electrochemistry of polyoxoanionic materials consisting of XO_{4 − y}A_y (A = F, N) groups. As an illustrative case, this work focuses on the effect of either N or F for O substitution upon the electrochemical properties of Li₂FeSiO₄. Within the Pmn2₁–Li₂FeSiO₄ structure, virtual models of Li₂Fe₂^2.5+SiO_3.5N_0.5 and Li_1.5Fe²⁺SiO_3.5F_0.5 have been analyzed. We predict that the lithium deinsertion voltage associated to the Fe^3+/Fe⁴⁺ redox couple is decreased by both substituents. The high theoretical specific capacity of Li₂FeSiO₄ (330 mAh/g) could be retained in N-substituted silicates thanks to the oxidation of N³⁻ anions, whilst Li_1.5Fe²⁺SiO_3.5F_0.5 has a lower specific capacity inherent to the F substitution. Substitution of N/F for O will respectively improve/worsen the electrode characteristics of Li₂FeSiO₄.     

Zn_2GeO_4纳米棒的制备及发光性质

采用水热合成法制备了纯菱形相的Zn_2GeO_4纳米棒,研究了水热制备前驱体溶液的pH值对材料尺寸及形貌的影响以及Zn_2GeO_4纳米棒的光学性质。扫描电子显微镜(SEM)测试结果表明,随着前驱体溶液pH值的变化样品逐渐由微米级块状结构生长成为纳米颗粒,并且进一步形成纳米棒结构。纳米棒的尺寸由长200 nm变化到500 nm。室温光致发光(PL)光谱中观察到位于450和530 nm两个不同的发光峰,其分别源于Zn_2GeO_4的不同缺陷能级。     

快离子导体LiTi2(PO4)3在LiNi0.8Co0.1Mn0.1O2正极材料表面的原位反应包覆及其电化学性能

通过原位反应法,利用富镍层状金属氧化物LiNi_0.8Co_0.1Mn_0.1O₂（LNCM811）正极材料表面残余的氢氧化锂和碳酸锂,与C₈H₂₀O₄Ti和（NH₄）H₂PO₄反应,在LNCM811表面原位生成快离子导体LiTi₂（PO₄）₃（LTP）包覆层。这种原位反应的包覆方法有利于移除LNCM811表面有害的残留物氢氧化锂和碳酸锂。而且,获得的LTP均匀包覆层不仅可以有效地抑制LNCM811表面和电解液的直接接触及其副反应,还可以确保充放电循环过程中LNCM811正极材料的快速Li⁺传导。因此,在LTP包覆层的多重作用下,LTP包覆的LNCM811正极材料具有优异的循环稳定性和倍率性能：在0.2C时,首次放电比容量高达200.6 mAh·g^-1,200圈后的可逆容量依然有155.7 mAh·g^-1;在2C和5C的高电流密度下,200圈后的可逆容量仍然有126.4和111.9 mAh·g^-1。     

Formation of different products during photo-catalytic reaction on TiO<Subscript>2</Subscript> suspension in water with and without 2-propanol under diverse ambient conditions

Studies on photo-catalytic reduction of CO₂ using TiO₂ photo-catalyst (0.1%, w/v) as a suspension in water was carried out at 350 nm light. CO₂ from both commercially available source, as well as generated in situ through 2-propanol oxidation, was used for this study. The photolytic products such as hydrogen (H₂), carbon monoxide (CO) andmethane (CH₄) generated were monitored in TiO₂ suspended aqueous solution with and without a hole scavenger, viz., 2-propanol. Similar photolytic experiments were also carried out with varying ambient such as air, O₂, N₂ and N₂O. The yields of CO and CH₄ in all these systems under the present experimental conditions were found to be increasing with light exposure time. H₂ yield in N₂-purged systems containing 2-propanol was found to be more as compared to the without 2-propanol system. The rate of H₂ production in N₂-purged aqueous solutions containing 0.1% TiO₂ suspension were evaluated to be 0.226 and 5.8 μl/h, without and with 0.5 M 2-propanol, respectively. This confirmed that 2-propanol was an efficient hole scavenger and it scavenged photo-generated holes (h⁺), allowing its counter ion, viz., e⁻, to react with water molecule/H⁺ to yield more H₂. The formation of both CO and CH₄ in the photolysis of CO₂-purged aqueous solutions containing suspended TiO₂ in absence of 2-propanol reveal that the generation of CH₄ is taking place mainly through CO intermediate. In presence of air/O₂, the yield of H₂ in the system without 2-propanol was observed to be negligible as compared to the system containing 2-propanol in which low yield of H₂ was obtained with a formation rate of approx. 0.5 μl/h.