Standard enthalpies of formation in the gas phase and relative stability of tautomers of C-nitro-1,2,4-triazole and isomers of N-alkyl-C-nitro-1,2,4-triazole: quantum-chemical studies

Quantum-chemical calculations of the standard enthalpies of formation in the gas phase of C-nitro-1,2,4-triazole and isomers of N-alkyl-C-nitro-1,2,4-triazoles (Alk = Me, Et, i-Pr, t-Bu) were carried out by the B3LYP method using equations for the isodesmic reactions and isomerization reactions. The relative Gibbs free energies of tautomers and isomers in aqueous solution were calculated. For the tautomers of C-nitro-1,2,4-triazole the structural indexes of aromaticity were estimated and the electron population density of the Natural Bond Orbital was analyzed. The relative stabilities of the described tautomers and isomers in the gas phase and in solutions were discussed on the basis of the results of the calculations. Dedicated to Academician B. A. Trofimov in his 70^th jubilee. Translated from Khimiya Geterosiklicheskikh Soedinenii, No. 1, 83-94, January, 2009.     

The enthalpies of formation and evolved gas detection

The standard molar enthalpies of formation of H₄SiW₁₂O₄₀·6H₂O (I), H₄SiW₁₂O₄₀·6DMF·H₂O (II), H₄SiW₁₂O₄₀·8DMSO·H₂O (III) have been determined. Thermodynamic cycles were designed, and the heat of reactions in the thermodynamic cycles were measured calorimetrically. The infrared spectra were compared with those of the heteropoly anion α-H₄SiW₁₂O₄₀ [1] and of the ligands DMF and DMSO. The evolved gas from the adducts was monitored by a quadrupole mass spectrometer at a heating rate of 16 deg·min^?1.     

Standard enthalpies of formation of selected XYZ half-Heusler compounds

The standard enthalpies of formation of selected ternary half-Heusler type compositions XYZ (X = Au, Co, Fe, Ir, Ni, Pd, Pt, Rh, Ru; Y = Hf, Mn, Ti, Zr; Z = Ga, Sn) were measured using high temperature direct reaction calorimetry. The measured standard enthalpies of formation (in kJ/mole of atoms) of the half-Heusler compounds (prototype MgAgAs, Pearson symbol cF12, space group F-43m) are, IrMnSn (−29.4 ± 1.8); NiTiSn (−52.6 ± 2.4); PtHfSn (−98.8 ± 3.4); PtMnSn (−55.8 ± 2.6); PtTiSn (−93.6 ± 3.3); PtZrSn (−104.9 ± 3.8); for the B2 compound (prototype CsCl, Pearson symbol cP2, space group Pm-3m), RuMnGa (−26.9 ± 1.7); for the C1 structured (prototype CaF₂, Pearson symbol cF12, space group Pm-3m) or the C1_b structured compound IrMnGa (−40.9 ± 1.7). Indicative standard enthalpies of formation of the following compounds were obtained, half-Heusler compounds AuMnSn, CoTiSn, IrZrSn, NiHfSn, NiZrSn, PdHfSn, PdZrSn, RhTiSn; Heusler compound (prototype Cu₂MnAl, Pearson symbol cF16, space group Fm-3m) RhMnSn; hexagonal compound (prototype BeZrSi, Pearson symbol hP6, space group P6₃/mmc) PtMnGa and another type of hexagonal compound (prototype RhHfSn, Pearson symbol hP18, space group P-62c) RhHfSn, IrZrsn, RhZrSn. Values were compared with ab initio calculations from AFLOW and OQMD. Lattice parameters of these compounds were determined using X-ray diffraction (XRD) analysis. Microstructures were characterized using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Selected alloys were further annealed to investigate phase transformations and phase relationships.     

Non-Covalent Interactions in Molecular Systems: Thermodynamic Evaluation of the Hydrogen-Bond Strength in Amino-Ethers and Amino-Alcohols

The intramolecular hydrogen bond (intra-HB) is one of the best-known examples of non-covalent interactions in molecules. Among the different types of intramolecular hydrogen bonding, the NH⋅⋅⋅O hydrogen bond in amino-alcohols and amino-ethers is one of the weakest. In contrast to the strong OH⋅⋅⋅N intramolecular hydrogen bond, the strength of the NH⋅⋅⋅O bond can hardly be measured with conventional spectroscopic methods, even for simple amino-alcohols, since the band belonging to the NH⋅⋅⋅O conformer merges with the free OH band. In this work, we developed a combination of G4 calculations, and a method based on experimental vaporization enthalpies to determine the NH⋅⋅⋅O hydrogen bonding strength. The archetypal compounds for this study are 2-amino-1-ethanol and 3-amino-1-propanol as well as their respective methoxy analogs. Based on these molecules, different series were studied to investigate various factors influencing NH⋅⋅⋅O intra-HB strength. In the first series, the influence of alkylation near the hydroxy or methoxy group and the amino group in sterically hindered aminoalcohols was examined. In the second series, the influence of alkylation of the amino-group was investigated. In the third series, the effect of extending the alkyl chain between functional groups was studied.     

Prediction of hydrocarbon enthalpies of formation by various thermochemical schemes

The correlation consistent composite approach (ccCA) has been used to compute the enthalpies of formation (ΔH_f′s) for 60 closed‐shell, neutral hydrocarbon molecules selected from an established set (Cioslowski et al., J. Chem. Phys. 2000 , 113, 9377). This set of thermodynamic values includes ΔH_f's for hydrocarbons that span a range of molecular sizes, degrees of aromaticity, and geometrical configurations, and, as such, provides a rigorous assessment of ccCA's applicability to a variety of hydrocarbons. The ΔH_f's were calculated via atomization energies, isodesmic reactions, and hypohomodesmotic reactions. In addition, for 12 of the aromatic molecules in the set that are larger than benzene, the energies of ring‐conserved isodesmic reactions were used to calculate the ΔH_f′s. Using an atomization energy approach to determine the ΔH_f′s, the lowest mean absolute deviation (MAD) from experiment achieved by ccCA for the 60 hydrocarbons was 1.10 kcal mol^?1. The use of the mixed Gaussian/inverse exponential complete basis set extrapolation scheme (ccCA‐P) in conjunction with hypohomodesmotic reaction energies resulted in a MAD of 0.87 kcal mol^?1. This value is compared with MADs of 1.17, 1.18, and 1.28 kcal mol^?1 obtained via the Gaussian‐4 (G4), Gaussian‐3 (G3), and Gaussian‐3(MP2) [G3(MP2)] methods, respectively (using the hypohomodesmotic reactions). © 2012 Wiley Periodicals, Inc.     

Enthalpies of formation and O-O and C-O bond strengths in polyoxides RO x R′ and RO x

Bond strengths in RO-OOR, ROO-OH, and ROO-OOR (R, R = H, Me, Et, and Bu) molecules, calculated by the semiempirical quantum-chemical methods, were used to determine the enthalpies of formation of polyoxides RO _x R (x = 3, 4) and related radicals and the bond strengths (D/kcal mol^–1) in these molecules:D(ROOO-OR) = 33.2±0.9,D(ROOO-OH) = 37.5±0.7,D(R-O _x R) = 76.0±1.2,D(H-000) = 58.6,D(R-000) = 42.8±0.8. A new value of Benson's polyoxide thermochemical increment, _f H°[O-(O)₂] = 11.1±1.0 kcal mol^–1, was suggested.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2190–2193, September, 1996.     

Determinations of combustion and formation enthalpies of C_(60)and C_(70)

Ｆｕｌｌｅｒｅｎｅｓａｒｅａｋｉｎｄｏｆｃａｒｂｏｎａｌｌｏｔｒｏｐｅｓｆｏｕｎｄｒｅｃｅｎｔｌｙ,ａｎｄｈａｖｅｄｉｓｔｉｎｃｔｉｖｅｓｔｒｕｃｔｕｒｅｓａｎｄｐｒｏｐｅｒｔｉｅｓ.Ｆｏｒｅｘａｍｐｌｅ,Ｃ60ｈａｓａｆｏｏｔｂａｌｌｌｉｋｅｃａｒｂｏｎｓｋｅｌｅｔｏｎｗｉｔｈ20ｓｉｘｍｅｍｂｅｒｅｄｒｉｎｇｓ,12ｆｉｖｅｍｅｍｂｅｒｅｄｒｉｎｇｓａｎｄａｌａｒｇｅｂａｌｌｓｈｅｌｌｌｉｋｅπｂｏｎｄｓｙｓｔｅｍ.Ａｌｔｅｒｎａｔｉｖｅｌｙ,Ｃ70ｈａｓａｎｅｌｌｉｐｓｏｉｄｌｉｋｅｃａｒｂｏｎｓｋｅｌ…     

Accurate prediction of enthalpies of formation for a large set of organic compounds

This article describes a multiparameter calibration model, which improves the accuracy of density functional theory (DFT) for the prediction of standard enthalpies of formation for a large set of organic compounds. The model applies atom based, bond based, electronic, and radical environmental correction terms to calibrate the calculated enthalpies of formation at B3LYP/6‐31G(d,p) level by a least‐square method. A diverse data set of 771 closed‐shell compounds and radicals is used to train the model. The leave‐one‐out cross validation squared correlation coefficient q² of 0.84 and squared correlation coefficient r² of 0.86 for the final model are obtained. The meanabsolute error in enthalpies of formation for the dataset is reduced from 4.9 kcal/mol before calibration to 2.1 kcal/mol after calibration. Five‐fold cross validation is also used to estimate the performance of the calibration model and similar results are obtained. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Uncatalyzed peptide bond formation between two double amino acid molecules in the gas phase

The gas phase mechanism for peptide bond formation between two double amino acid (DAA) molecules ((NH₂)₂C(COOH)₂) is investigated in the absence of any catalysts. Two different paths, concerted and stepwise, each leading to both cis and trans DAA‐DAA dipeptide products (four mechanisms total) are examined on the basis of theoretical calculations carried out at the CCSD(T)/aug‐cc‐pVDZ//MP2/aug‐cc‐pVDZ level. The investigation indicates that the concerted mechanism leading to the trans configuration of the peptide bond in the DAA‐DAA dipeptide product is thermodynamically favored by about 5 kcal mol^?1 and requires slightly less energy than the remaining pathways considered. Moreover, the peptide bond formation process between two DAA molecules in the gas phase resembles the analogous reactions between two natural amino acids.     

Determinations of combustion and formation enthalpies of C60 and C70

By using a micro-bomb calorimeter, the standard enthalpies of combustion of C₆₀ and C₇₀ have been determined to be - (25 947.1±8.5) and - (29 956.1 ± 8.9) kJ/mol respectively. A g. 1. c. analysis indicated that the amounts of residual organic solvents in the samples were very small, and their effects on the final results were negligible. The energy of combustion ofC60 determined in this work is in agreement in the uncertainty interval with that determined by means of traditional calorimeter using macro amount of sample. The enthalpies of formation of these two substances have been derived. The strain energies in the molecules of C₆₀ and C₇₀ were estimated by a bond energy scheme and by using corannulene as the model compound, the results estimated from different methods are very close. Project supported by the National Natural Science Foundation of China (Grant No. 29473143)     

Gas-phase enthalpies of formation of the fluorobenzenes family and their dewar isomers from ab initio calculations

The standard gas-phase enthalpies of formation, at T = 298.15 K, of the complete series of fluorobenzene and their corresponding dewar isomers have been determined by means of the CBS-QB3 and G3MP2B3 composite approaches. These values have been estimated by using appropriate supporting reactions, such as, reactions of atomization or of atom substitution. The results show that there is a linear dependence between the enthalpy of the most stable n-fluorobenzene and the corresponding n-fluorodewar benzene (n = 0, 1, …, 6). Further, the estimates are always more negative than the experimental results and so, suggested enthalpies of formation for 1,2,3-, 1,2,4- and 1,3,5-trifluorobenzenes and for 1,2,3,4- and 1,2,3,5-tetrafluorobenzenes are those retrieved from G3MP2B3 calculations added by 8 kJ/mol. The interaction of four different M⁺ ions with fluorobenzene and the three difluorobenzenes shows that the σ-interaction with 1,2-difluorobenzene is stronger than π-interaction on these fluorobenzenes.     

N-Heterocyclic carbenes: state of the art in transition-metal-complex synthesis

Recently, transition-metal complexes containing nucleophilic N-heterocyclic carbenes (NHCs) have been receiving increased attention in the literature, largely due to their favorable application in homogeneous catalysis. This article reviews the principles of known preparative procedures of such complexes that have been developed over the past 30 years since the independent isolation of chromium and mercury imidazolin-2-ylidene complexes by Öfele and Wanzlick. The discussion will focus exclusively on the preparation of complexes of nitrogen heterocycles and makes no claim to be exhaustive. These complexes exhibit all the principles of NHC ligands and appear most frequently in the literature.     

Addition of carbenes to the sidewalls of single-walled carbon nanotubes

The addition of carbenes CX(2) (X=H, Cl) to single-walled carbon nanotubes (SWNTs) was investigated by density functional theory and finite, hydrogen-terminated nanotube clusters or periodic boundary conditions in conjunction with basis sets of up to polarized triple-zeta quality. For armchair [(3,3) to (12,12)] and zigzag tubes [(3,0) to (18,0)], reaction of CH(2) with the C--C bond oriented along the tube axis (A) is less exothermic than with those C--C bonds having circumferential (C) orientation. This preference decreases monotonically with increasing tube diameter for armchair, but not for zigzag tubes; here, tubes with small band gaps have a very low preference for circumferential addition. Axial addition results in cyclopropane products, while circumferential addition produces "open" structures for both armchair and zigzag tubes. The barriers for addition of dichlorocarbene to a (5,5) SWNT, studied for a finite C(90)H(20) cluster, are higher than that for addition to C(60), in spite of similar diameters of the carbon materials. Whereas addition of CCl(2) to [60]fullerene proceeds in a concerted fashion, addition to a (5,5) armchair SWNT is predicted to occur stepwise and involve a diradicaloid intermediate according to B3LYP, PBE, and GVB-PP computations. Addition to C bonds of (5,5) armchair tubes resulting in the thermodynamically more stable insertion products is kinetically less favorable than that to A bonds yielding cyclopropane derivatives.     

Phosphorous disulfide and its ions in the electronic ground state: a gas phase theoretical study

Ab initio molecular orbital theory and density functional theory calculations were performed on the electronic ground states of the open-shell PS₂ molecule and its singly charged ions. A comparison of the optimized molecular structures indicates as the stepwise one-electron reduction of the PS₂⁺ ion, to yield PS₂ and PS₂⁻, provokes a symmetric elongation of both PS bonds along with a bending of its linear equilibrium geometry. The ionization potential (IP), adiabatic electron affinity (EA_ad), and atomization energy (AE) of the open-shell PS₂ molecule were calculated at different levels of theory. The following values were obtained at the more realistic UMP4SDTQ/6-311+G(3df)//UHF/6-311+G(3df) level of theory: IP=8.32 eV, EA_ad=3.03 eV and AE=12.40 eV. At the same level of theory, the calculated vertical detachment energy (VDE) of the PS₂⁻ anion is 3.22 eV. The donor–acceptor complexes formed in the gas-phase upon interaction of either one or two ammonia molecules with PS₂⁺ were also investigated. The calculated gas-phase binding energies indicate that the formation of the bis-adduct is favored over that of the mono-adduct by a binding energy gain of about 20 kcal/mol.     

Molecular enthalpies 3: Ground-state thermodynamic and computed enthalpies of the valence isomers of benzene

This paper is a study of benzene, Dewar benzene, benzvalene, [3]prismane, and 3,3-bicyclopropenyl by the MM2, MM3, MNDO, AM1, and PM3 calculational methods. Comparisons are made with experimental results and ab initio molecular orbital calculations from the literature.     

Nearest-Neighbour and Non-Nearest-Neighbour Non-Covalent Interactions between Substituents in the Aromatic Systems: Experimental and Theoretical Investigation of Functionally Substituted Benzophenones

Benzophenone derivatives exhibit not only biological activity but also act as photo initiator and UV blocker. We carried out experimental and theoretical thermochemical studies of hydroxy- and methoxy-substituted benzophenones. Standard molar enthalpies of vaporisation were obtained from the temperature dependence of vapour pressures measured by the transpiration method. The thermodynamic data on phase transitions available in the literature (crystal–gas, crystal–liquid, and liquid–gas) were also collected and evaluated. High-level quantum chemical methods G3MP2 and G4 were used to estimate the standard molar enthalpies of formation of substituted benzophenones in the gas phase and establish agreement between experimental and theoretical results. The application of the “centrepiece” group-contribution approach to hydroxy- and methoxy-substituted benzophenones was demonstrated. A quantitative assessment of the hydrogen bond was carried out using various approaches based on experimental data and quantum chemical calculations.     

Experimental and Theoretical Investigation on the Thermochemistry of 3-Methyl-2-benzoxazolinone and 6-Nitro-2-benzoxazolinone

The determination of the reliable thermodynamic properties of 2-benzoxazolinone derivatives is the main goal of this work. Some correlations are established between the energetic properties determined and the structural characteristics of the title compounds, and the reactivity of this class of compounds is also evaluated. Static-bomb combustion calorimetry and high-temperature Calvet microcalorimetry were used to determine, respectively, the standard molar enthalpies of formation in the solid state and the standard molar enthalpies of sublimation, both at T = 298.15 K. Using the results obtained for each compound, the respective gas-phase standard molar enthalpy of formation was derived. High-level quantum chemical calculations were performed to estimate the same property and the results evidence good accordance. Moreover, the gas-phase relative thermodynamic stability of 2-benzoxazolinone derivatives was also evaluated using the respective gas-phase standard molar Gibbs energy of formation. In addition, the relationship between the energetic and structural characteristics of the benzoxazolinones is presented, evidencing the enthalpic increments associated with the presence of a methyl and a nitro groups in the molecule, and this effect is compared with similar ones in other structurally related compounds.