共查询到20条相似文献,搜索用时 46 毫秒
1.
Zilun Chen Pu Zhou Xiaolin Wang Xiao li Jing Hou Xiaojun Xu Zongfu Jiang Zejin Liu 《Optics & Laser Technology》2009,41(6):710-713
The coherent beam addition of pulsed fiber lasers is an effective way to improve the average power and the peak pulse power. We demonstrate a new architecture based on mutual injection and phase modulation to generate synchronous pulsed fiber lasers. Firstly, we realize the synchronization of the pulses of three fiber lasers using this technique. Secondly, coherent addition of three synchronous pulsed fiber lasers is obtained. Experimental results show that the three fiber lasers are phase locked and have good temporal and spatial coherence under mutual injection locking. This method can be extended to combine more beams. 相似文献
2.
采用波长1064 nm,功率为1 W的种子激光实现了两路光纤激光的相干合成,采用了两只保偏光纤准直器接收两路光干涉信号,与利用透镜直接把干涉信号会聚在探测器上相比,这种耦合方式得到的光干涉信号的条纹对比度更高。对相位噪声以及相位噪声的带宽进行了研究,结果表明,相位噪声由电信号串扰以及环境扰动产生。通过人为拨动光纤来增加相位噪声带宽,当相位噪声带宽增加时,相位控制精度下降。提出了提高相位控制精度的方法,实验获得了桶中功率为21.3%、斯特列尔比为79%、相位控制精度为0.008的相干合成效果。 相似文献
3.
采用波长1064 nm,功率为1 W的种子激光实现了两路光纤激光的相干合成,采用了两只保偏光纤准直器接收两路光干涉信号,与利用透镜直接把干涉信号会聚在探测器上相比,这种耦合方式得到的光干涉信号的条纹对比度更高。对相位噪声以及相位噪声的带宽进行了研究,结果表明,相位噪声由电信号串扰以及环境扰动产生。通过人为拨动光纤来增加相位噪声带宽,当相位噪声带宽增加时,相位控制精度下降。提出了提高相位控制精度的方法,实验获得了桶中功率为21.3%、斯特列尔比为79%、相位控制精度为0.008的相干合成效果。 相似文献
4.
Yb-Bi pulsed fiber lasers 总被引:1,自引:0,他引:1
A new type of pulsed fiber laser is suggested and developed - Yb-Bi lasers. In such lasers the Yb fiber laser is Q-switched by use of a saturable absorber, a Bi-doped fiber placed in its own resonator, and pulsed lasing is obtained in both fiber lasers. Continous-wave diode-clad pumping of the Yb-Bi lasers at a 975 nm wavelength with power up to 16.5 W results in pulsed laser action in a spectral diapason of 1050-1200 nm with a maximum pulse energy of up to 100 microJ, an average power up to 7.5 W, and a repetition rate up to 100 kHz. 相似文献
5.
X. L. Wang P. Zhou Y. X. Ma H. T. Ma X. J. Xu Z. J. Liu Y. J. Zhao 《Laser Physics》2010,20(6):1453-1458
We demonstrate a scalable architecture for coherent combining of all-fiber pulsed lasers with hybrid phase control involving
passive phasing and active phasing for the first time. Synchronized and passive phased pulsed laser array is built by intra-activity
phase modulation. Active phase control on the passive phased pulsed laser array using stochastic parallel gradient descent
algorithm provides stable in-phase coherent beam combining pattern in a turbulent atmosphere. The fringe visibility is increased
from 0 two 0.43 and the power encircled in the main-lobe is 1.616 times increased when the system evolves from passive phasing
to hybrid phasing. The architecture can be easily scaled up to high power by increasing power of each individual laser, number
of laser elements and introduction of power amplifiers, which will lead a promising way for scaleable high power coherent
beam combining of pulsed lasers. 相似文献
6.
窄带耗散孤子锁模光纤激光器可以产生接近变换限制的皮秒脉冲,但受非线性相移的限制,输出脉冲重复频率不能通过增加腔长来降低,脉冲能量仅在0.1 nJ以下,严重制约着这类皮秒脉冲的实际应用。提出一种通过耦合器抽取腔内脉冲能量、抑制腔内非线性相移积累,进而允许增加腔长来降低窄带耗散孤子皮秒光纤激光脉冲重复频率的方法。运用该方法,成功地将激光器重复频率由35.2 MHz降低到了1.77 MHz,且脉冲时频特性保持不变。提出了一种基于级间FBG陷波滤波的抑制皮秒脉冲光纤放大中光谱展宽的方法。通过简单地使用级间陷波滤波器,既可窄化第一级光纤放大器后的输出脉冲谱宽,允许采用第二级光纤放大器进一步提升脉冲能量,而且,还可将脉冲重塑为近高斯形,利用高斯脉冲光谱展宽斜率小的特点,允许第二级光纤放大器将脉冲能量提升得更高。利用该方法,在RMS(均方值)谱宽保持0.4 nm以内的前提下,10 ps脉冲经标准单模光纤放大器后,能量可由0.2 nJ可提升到10 nJ以上。 相似文献
7.
8.
In this review article, the development of the double cladding optical fiber for high power fiber lasers is reviewed. The main technology for high power fiber lasers, including laser diode beam shaping, fiber laser pumping techniques, and amplification systems, are discussed in detail. 1050 W CW output and 133 W pulsed output are obtained in Shanghai Institute of Optics and Fine Mechanics, China. Finally, the applications of fiber lasers in industry are also reviewed. 相似文献
9.
Coherent beam combination of adaptive fiber laser array with tilt-tip and phase-locking control
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
We present an experimental study on tilt-tip(TT) and phase-locking(PL) control in a coherent beam combination(CBC) system of adaptive fiber laser array.The TT control is performed using the adaptive fiber-optics collimator(AFOC),and the PL control is realized by the phase modulator(PM).Cascaded and simultaneous controls of TT and PL using stochastic parallel gradient descent(SPGD) algorithm are investigated in this paper.Two-fiber-laser-,four-fiber-laser-,and six-fiber-laser-arrays are employed to study the TT and PL control.In the cascaded control system,only one high-speed CMOS camera is used to collect beam data and a computer is used as the controller.In a simultaneous control system one high-speed CMOS camera and one photonic detector(PD) are employed,and a computer and a control circuit based on field programmable gate array(FPGA) are used as the controllers.Experimental results reveal that both cascaded and simultaneous controls of TT using AFOC and PL using PM in fiber laser array are feasible and effective.Cascaded control is more effective in static control situation and simultaneous control can be applied to the dynamic control system directly.The control signals of simultaneous PL and TT disturb each other obviously and TT and PL control may compete with each other,so the control effect is limited. 相似文献
10.
In this review article, the development of the double cladding optical fiber for high power fiber lasers is reviewed. The
main technology for high power fiber lasers, including laser diode beam shaping, fiber laser pumping techniques, and amplification
systems, are discussed in detail. 1050 W CW output and 133 W pulsed output are obtained in Shanghai Institute of Optics and
Fine Mechanics, China. Finally, the applications of fiber lasers in industry are also reviewed.
相似文献
11.
12.
《中国光学快报(英文版)》2020,(7)
High-repetition-rate(HRR) pulsed fiber lasers have attracted much attention in various fields. To effectively achieve HRR pulses in fiber lasers, dissipative four-wave-mixing mode-locking is a promising method. In this work, we demonstrated an HRR pulsed fiber laser based on a virtually imaged phased array(VIPA), serving as a comb filter. Due to the high spectral resolution and low polarization sensitivity features of VIPA, the 30 GHz pulse with high quality and high stability could be obtained. In the experiments, both the single-waveband and dual-waveband HRR pulses were achieved. Such an HRR pulsed fiber laser could have potential applications in related fields, such as optical communications. 相似文献
13.
为提高光纤激光器无源自调整相干合成阵列的效率、稳定性和可扩展性,提出了基于公共光纤环形腔耦合与单模光纤滤波的光纤激光器相干合成方案。将多个2×2的光纤耦合器分别插入各单元激光器的谐振腔,利用耦合器余下的端口,两两相连构成公共环形耦合腔。采用单模光纤滤波技术,提高了各输出激光束之间相位锁定的稳定性。利用该方案在实验上实现了三路光纤激光器的被动锁相输出,实验测得的远场干涉光斑、输出功率及光谱均表明该方案适于构建性能较好的光纤激光器相干合成阵列。 相似文献
14.
15.
16.
自相位调制(SPM)效应会展宽窄线宽脉冲光纤激光的光谱宽度,降低其相干性.通过相位调制对SPM引起的非线性相移进行预补偿,能够使脉冲激光在光纤中进行放大和传输后保持种子激光的光谱特性.基于三波耦合方程开展数值仿真,研究了在对SPM进行"欠补偿","完全补偿"和"过补偿"的情况下,SPM预补偿对受激布里渊散射阈值和激光光谱特性的影响.开展了SPM预补偿实验研究,将脉冲激光的光谱宽度从1.4 GHz压缩到120 MHz.研究内容可以为窄线宽脉冲光纤激光系统的设计搭建提供参考. 相似文献
17.
报道了一种基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器.该激光器采用环形腔结构,利用自制的三层石墨烯薄膜作为可饱和吸收体实现锁模.同时在腔内插入一个窄带光纤光栅,约束腔内起振的纵模数,适当调节抽运功率和偏振控制器的角度,得到了重复频率为3.8 MHz、脉宽在3.8—94.3 ns之间灵活可调的2μm纳秒锁模脉冲输出,整个脉宽调节范围超过90 ns.此外,由于获得的兆赫兹纳秒锁模脉冲时间带宽积在49—1119范围内,即存在强烈的啁啾,因而可作为2μm波段啁啾脉冲放大系统中的种子源使用. 相似文献
18.
通过耦合激光混沌相位控制同步系统和光纤信道,提出外部光注入半导体激光器激光混沌相 位控制光纤同步以及混沌相位相移键控外调制光纤保密通信系统理论模型,数值实现了在相 位控制器控制下的远程光纤混沌同步.理论分析了光纤自相位调制对混沌信号以及对同步的 影响,导出了光纤混沌最大传输距离公式.通过连续键控调制相位控制器实现了光纤激光混 沌相位相移键控编码调制发射,设置接收系统相位控制器控制激光相位相移实现了光纤激光 混沌同步解调.数值模拟了具有比特率50Mbit/s远程光纤混沌数字编码通信系统的应用,详 细地进行了在远距离光纤传输中的系统参数失配以及系统抗噪声能力的数值分析.
关键词:
混沌
同步
光纤混沌通信
半导体激光器
相位 相似文献
19.