Influence of Schottky drain contacts on the strained AlGaN barrier layer of AlGaN/AlN/GaN heterostructure field-effect transistors

Rectangular Schottky drain AlGaN/AlN/GaN heterostructure field-effect transistors (HFETs) with different gate contact areas and conventional AlGaN/AlN/GaN HFETs as control were both fabricated with same size. It was found there is a significant difference between Schottky drain AlGaN/AlN/GaN HFETs and the control group both in drain series resistance and in two-dimensional electron gas (2DEG) electron mobility in the gate-drain channel. We attribute this to the different influence of Ohmic drain contacts and Schottky drain contacts on the strained AlGaN barrier layer. For conventional AlGaN/AlN/GaN HFETs, annealing drain Ohmic contacts gives rise to a strain variation in the AlGaN barrier layer between the gate contacts and the drain contacts, and results in strong polarization Coulomb field scattering in this region. In Schottky drain AlGaN/AlN/GaN HFETs, the strain in the AlGaN barrier layer is distributed more regularly.     

Thermal stability of tungsten and tungsten nitride Schottky contacts to AlGaN/GaN

Thin tungsten nitride (WNx) films were produced by reactive DC magnetron sputtering of tungsten in an Ar-N2 gas mixture. The films were used as Schottky contacts on AlGaN/GaN heterostructures. The Schottky behaviours of WNx contact was investigated under various annealing conditions by current-voltage (I-V ) measurements. The results show that the gate leakage current was reduced to 10-6 A/cm2 when the N2 flow is 400 mL/min. The results also show that the WNx contact improved the thermal stability of Schottky contacts. Finally, the current transport mechanism in WNx/AlGaN/GaN Schottky diodes has been investigated by means of I-V characterisation technique at various temperatures between 300 K and 523 K. A TE model with a Gaussian distribution of Schottky barrier heights (SBHs) is thought to be responsible for the electrical behaviour at temperatures lower than 523 K.     

Determination of the series resistance under the Schottky contacts of AlGaN/AlN/GaN Schottky barrier diodes

Rectangular AlGaN/AlN/GaN heterostructure field-effect transistors (HFETs) were fabricated,and the gate and the source of the HFETs consisted of AlGaN/AlN/GaN Schottky barrier diodes (SBDs).Based on the measured forward current-voltage and the capacitance-voltage characteristics of the AlGaN/AlN/GaN SBDs,the series resistance under the Schottky contacts (RS) was calculated using the method of power consumption,which has been proved to be valid.Finally,the method of power consumption for calculating R S was successfully used to study the two-dimensional electron gas electron mobility for a series of circular AlGaN/AlN/GaN SBDs.It is shown that the series resistance under the Schottky contacts cannot be neglected and is important for analysing and characterizing the AlGaN/AlN/GaN SBDs and the AlGaN/AlN/GaN HFETs.     

Determination of the series resistance under the Schottky contacts of AlGaN/AlN/GaN Schottky barrier diodes

Rectangular AlGaN/AlN/GaN heterostructure field-effect transistors (HFETs) were fabricated, and the gate and the source of the HFETs consisted of AlGaN/AlN/GaN Schottky barrier diodes (SBDs). Based on the measured forward current-voltage and the capacitance-voltage characteristics of the AlGaN/AlN/GaN SBDs, the series resistance under the Schottky contacts (R_S) was calculated using the method of power consumption, which has been proved to be valid. Finally, the method of power consumption for calculating R_S was successfully used to study the two-dimensional electron gas electron mobility for a series of circular AlGaN/AlN/GaN SBDs. It is shown that the series resistance under the Schottky contacts cannot be neglected and is important for analysing and characterizing the AlGaN/AlN/GaN SBDs and the AlGaN/AlN/GaN HFETs.     

AlGaN/GaN肖特基结参数分析与电流运输机理研究

通过对AlGaN/GaN HEMT器件肖特基栅电流输运机理的研究,在变温下采用I-V法对AlGaN/GaN上的Ni/Au肖特基势垒高度和理想因子进行了计算. 通过对不同电流机理的分立研究,得到了更为准确的势垒高度值_b. 通过分析温度在300—550K之间肖特基反向泄漏电流的特性,得出结论：AlGaN材料的表面漏电不是HEMT器件反向泄漏电流的主要来源. 关键词： AlGaN/GaN异质结 肖特基结 理想因子     

Influence of thermal stress on the characteristic parameters of AlGaN/GaN heterostructure Schottky contacts

Ni Schottky contacts on AlGaN/GaN heterostructures have been fabricated. The samples are then thermally treated in a furnace with N₂ ambient at 600 ^circC for different times (0.5, 4.5, 10.5, 18, 33, 48 and 72 h). Current-voltage (I-V) and capacitance-voltage (C-V) relationships are measured, and Schrödinger's and Poisson's equations are self-consistently solved to obtain the characteristic parameters related to AlGaN/GaN heterostructure Schottky contacts: the two-dimensional electron gas (2DEG) sheet density, the polarization sheet charge density, the 2DEG distribution in the triangle quantum well and the Schottky barrier height for each thermal stressing time. Most of the above parameters reduce with the increase of stressing time, only the parameter of the average distance of the 2DEG from the AlGaN/GaN interface increases with the increase of thermal stressing time. The changes of the characteristic parameters can be divided into two stages. In the first stage the strain in the AlGaN barrier layer is present. In this stage the characteristic parameters change rapidly compared with those in the second stage in which the AlGaN barrier layer is relaxed and no strain is present.     

AlGaN/GaN异质结Ni/Au肖特基表面处理及退火研究

采用O₂等离子体及HF溶液对AlGaN/GaN异质结材料进行表面处理后，Ni/Au肖特基接触特性比未处理有了明显改善，反向泄漏电流减小3个数量级.对制备的肖特基接触进行200—600℃ 5min的N₂气氛退火，发现退火冷却后肖特基反向泄漏电流随退火温度增大进一步减小.N₂气中600℃退火后肖特基二极管C-V特性曲线在不同频率下一致性变好，这表明退火中Ni向材料表面扩散减小了表面陷阱密度；C-V特性曲线随退火温度增大向右移动，从二维电子气耗尽电压绝对值减小反映了肖特基势垒的提高. 关键词： AlGaN/GaN 肖特基接触 表面处理 退火     

Influence of thermal stress on the relative permittivity of the AlGaN barrier layer in an AlGaN/GaN heterostructure Schottky contacts

Ni Schottky contacts on AlGaN/GaN heterostructures were fabricated. Some samples were thermally treated in a furnace with N₂ ambience at 600 °C for different times (0.5 h, 4.5 h, 10.5 h, 18 h, 33 h, 48 h, and 72 h), the others were thermally treated for 0.5 h at different temperatures (500 °C, 600 °C, 700 °C, and 800 °C). With the measured current—voltage (I—V) and capacitance—voltage (C—V) curves and by self-consistently solving Schrodinger's and Poisson's equations, we found that the relative permittivity of the AlGaN barrier layer was related to the piezoelectric and the spontaneous polarization of the AlGaN barrier layer. The relative permittivity was in proportion to the strain of the AlGaN barrier layer. The relative permittivity and the strain reduced with the increased thermal stress time until the AlGaN barrier totally relaxed (after 18 h at 600 °C in the current study), and then the relative permittivity was almost a constant with the increased thermal stress time. When the sample was treated at 800 °C for 0.5 h, the relative permittivity was less than the constant due to the huge diffusion of the contact metal atoms. Considering the relation between the relative permittivity of the AlGaN barrier layer and the converse piezoelectric effect, the conclusion can be made that a moderate thermal stress can restrain the converse piezoelectric effect and can improve the stability of AlGaN/GaN heterostructure devices.     

Characterization of Ohmic contacts on GaN/AlGaN heterostructures

The surface morphology and electrical resistance of the contacts on semiconductor devices are strongly influenced by metallization scheme and annealing conditions. In this work is presented an investigation of Ohmic contacts formed by metal-semiconductor alloying on epitaxial GaN/AlGaN heterostructures. After the deposition of metallic multi-layers (Ti, Al, Au and Pt), the process of rapid thermal annealing was carried out in nitrogen, argon and forming gas atmosphere.A series of the samples with different sequences of metallic layers and diverse thicknesses was prepared by employing electron beam evaporation and lift-off deposition techniques. The chemical composition of the samples before and after annealing was studied by means of X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) techniques combined with low energy Ar⁺ ion sputtering. The sputtering has been carried out in two different modes: by using constant (square) or gradually narrowed sputtered area. The changes in the chemical state of constituent elements and compositional profiles of the contacts after thermal annealing were revealed from the obtained results. Among the technological problems, influencing on the quality of the contact, were found to be the oxidation and nitridation of the contact surface during thermal annealing, as well as the intermediate sub-layers of Al and Ti oxides, formed during the deposition of metallic multi-layered structure.     

Intersubband absorption in strained AlGaN/GaN double quantum wells

The intersubband absorption of the four-energy-level system in strained AlGaN/GaN double quantum wells is calculated by considering the polarization effect and the strain modification on material parameters (e.g., the conduction band offset, the electron effective mass and the static dielectric constant). It is found that the electron wavefunctions mainly locate at the left well and penetrate into the left barrier. The absorption spectrum exhibits multiple peaks contributed by different transitions. The position and height of absorption peaks are not very sensitive to the structural parameters (i.e., composition and thickness) of the central barrier because of the strong built-in electric field. However, the coupling between two wells can be enhanced by strain modulation.     

Schottky forward current transport mechanisms in AlGaN/GaN HEMTs over a wide temperature range

The behavior of Schottky contacts in AlGaN/GaN high electron mobility transistors(HEMTs) is investigated by temperature-dependent current–voltage(T –I–V) measurements from 300 K to 473 K. The ideality factor and barrier height determined based on the thermionic emission(TE) theory are found to be strong functions of temperature, while present a great deviation from the theoretical value, which can be expounded by the barrier height inhomogeneities. In order to determine the forward current transport mechanisms, the experimental data are analyzed using numerical fitting method,considering the temperature-dependent series resistance. It is observed that the current flow at room temperature can be attributed to the tunneling mechanism, while thermionic emission current gains a growing proportion with an increase in temperature. Finally, the effective barrier height is derived based on the extracted thermionic emission component, and an evaluation of the density of dislocations is made from the I–V characteristics, giving a value of 1.49 × 107cm-2.     

Effect of heating on electrical transport in AlGaN/GaN Schottky barrier diodes on Si substrate

Thermal properties of the AlGaN/GaN Schottky barrier diodes were investigated, using a pulsed-IV measurement technique. The thermally degraded mobility in the DC-bias configuration was restored, when the pulse-bias voltages were applied. It was observed that heat generation was minimized, using a pulse width of 500 ns and pulse period of 10 ms. For the SBDs consisting of 5 μm of anode–cathode distance, on-resistance measured by the pulse-IV and DC-IV were 1.6 and 6.2 Ω-mm, respectively. We also demonstrated the device-width dependence of the thermal properties of the SBDs. We found that the performance of the power devices can be greatly influenced by the heat generation.     

Hydrogen Sensors Based on AlGaN/AlN/GaN Schottky Diodes

Pt/AlGaN/AlN/GaN Schottky diodes are fabricated and characterized for hydrogen sensing. The Pt Schottky contact and the Ti/Al/Ni/Au ohmic contact are formed by evaporation. Both the forward and reverse currents of the device increase greatly when exposed to hydrogen gas. A shift of 0.3 V at 300 K is obtained at a fixed forward current after switching from N2 to 10%H2＋N2. The sensor responses under different concentrations from 50ppm H2 to 10%H2＋N2 at 373K are investigated. Time dependences of the device forward current at 0.5 V forward bias in N2 and air atmosphere at 300 and 373K are compared. Oxygen in air azcelerates the desorption of the hydrogen and the recovery of the sensor. Finally, the decrease of the Schottky barrier height and sensitivity Of the sensor are calculated.     

New GaN Schottky barrier diode employing a trench on AlGaN/GaN heterostructure

A new GaN Schottky barrier diode employing a trench structure, which is proposed and fabricated, successfully decreases a forward voltage drop without sacrificing any other electric characteristics. The trench is located in the middle of Schottky contact during a mesa etch. The Schottky metal of Pt/Mo/Ti/Au is e-gun evaporated on the 300 nm-deep trench as well as the surface of the proposed GaN Schottky barrier diode. The trench forms the vertical Au Schottky contact and lateral Pt Schottky contact due to the evaporation sequence of Schottky metal. The forward voltage drops of the proposed diode and conventional one are 0.73 V and 1.25 V respectively because the metal work function (5.15 eV) of the vertical Au Schottky contact is considerably less than that of the lateral Pt Schottky contact (5.65 eV). The proposed diode exhibits the low on-resistance of 1.58 mΩ cm² while the conventional one exhibits 8.20 mΩ cm² due to the decrease of a forward voltage drop.     

Comparison of electrical characteristic between AlN/GaN and AlGaN/GaN heterostructure Schottky diodes

Ni/Au Schottky contacts on AlN/GaN and AlGaN/GaN heterostructures are fabricated.Based on the measured current–voltage and capacitance–voltage curves,the electrical characteristics of AlN/GaN Schottky diode,such as Schottky barrier height,turn-on voltage,reverse breakdown voltage,ideal factor,and the current-transport mechanism,are analyzed and then compared with those of an AlGaN/GaN diode by self-consistently solving Schrdinger’s and Poisson’s equations.It is found that the dislocation-governed tunneling is dominant for both AlN/GaN and AlGaN/GaN Schottky diodes.However,more dislocation defects and a thinner barrier layer for AlN/GaN heterostructure results in a larger tunneling probability,and causes a larger leakage current and lower reverse breakdown voltage,even though the Schottky barrier height of AlN/GaN Schottky diode is calculated to be higher that of an AlGaN/GaN diode.     

Effect of CO on Characteristics of AlGaN/GaN Schottky Diode

Pt Schottky diode gas sensors for CO are fabricated using A1GaN/GaN high electron mobility transistor（HEMTs）structure. The diodes show a remarkable sensor signal （3 mA, in N2, 2mA in air ambient） biased 2 V after 1% CO is introduced at 50℃. The Schottky barrier heights decrease for 36meV and 27meV in the two cases respectively. The devices exhibit a slow recovery characteristic in air ambient but almost none in the background of pure N2, which reveals that oxygen molecules could accelerate the desorption of CO and offer restrictions to CO detection.     

AlGaN/GaN高电子迁移率晶体管肖特基高温退火机理研究

在不同应力条件下,研究了AlGaN/GaN高电子迁移率晶体管高温退火前后的电流崩塌、栅泄漏电流以及击穿电压的变化.结果表明,AlGaN/GaN高电子迁移率晶体管通过肖特基高温退火以后,器件的特性得到很大的改善.利用电镜扫描(SEM)和X射线光电子能谱(XPS)对高温退火前、后的肖特基接触界面进行深入分析,发现器件经过高温退火后,Ni和AlGaN层之间介质的去除,并且AlGaN材料表面附近的陷阱减少,使得肖特基有效势垒提高,从而提高器件的电学特性. 关键词： AlGaN/GaN高电子迁移率晶体管 肖特基接触 界面陷阱     

Quantum transport in low-dimensional AlGaN/GaN systems

In this work, we investigated the magnetotransport properties of a two dimensional electron gas hosted in an AlGaN/AlN/GaN heterostructure and one-dimensional devices fabricated on it. At cryogenic temperature, high mobility and long mean free path is achieved, allowing ballistic transport experiments. Longitudinal resistivity measured in Hall bar geometry shows well-developed Shubnikov–de Haas oscillations with amplitude modulation. Amongst possible mechanisms, the zero-field spin splitting may be the origin of the observed effects. Split gate quantum point contacts were fabricated by electron beam lithography. Linear conductance measurements at zero magnetic field show clear quantized conductance plateaus at 2e ²/h and 4e ²/h. Non-perfectly quantized conductance values are found for higher plateaus, suggesting the presence of impurity scattering.     

Two-dimensional electron transport in AlGaN/GaN heterostructures

We present a theoretical study of electron transport properties of two-dimensional electron gas in AlGaN/GaN heterostructures. By assuming a drifted Fermi–Dirac distribution and taking into account all major scattering mechanisms, including polar optical and acoustic phonons, background impurities, dislocation and interface roughness, the momentum- and energy-balance equations derived from Boltzmann equation are solved self-consistently. The dependence of the electron drift velocity and electron temperature as a function of the applied electric field are obtained and discussed.     

Determination of the relative permittivity of the AlGaN barrier layer in strained AlGaN/GaN heterostructures

Using the measured capacitance--voltage curves and the photocurrent spectrum obtained from the Ni Schottky contact on a strained Al_0.3Ga_0.7N/GaN heterostructure, the value of the relative permittivity of the AlGaN barrier layer was analysed and calculated by self-consistently solving Schr?dinger's and Poisson's equations. It is shown that the calculated values of the relative permittivity are different from those formerly reported, and reverse biasing the Ni Schottky contact has an influence on the value of the relative permittivity. As the reverse bias increases from 0 V to --3~V, the value of the relative permittivity decreases from 7.184 to 7.093.