Constructing 2D Sandwich-like MOF/MXene Heterostructures for Durable and Fast Aqueous Zinc-Ion Batteries

Two-dimensional metal–organic frameworks (2D MOFs) can be used as the cathodes for high-performance zinc-ion battery due to their large one-dimensional channels. However, the conventionally poor electrical conductivity and low structural stability hinder their advances. Herein, we report an alternately stacked MOF/MX heterostructure, exhibiting the 2D sandwich-like structure with abundant active sites, improved electrical conductivity and exceptional structural stability. Ex situ characterizations and theoretical calculations reveal a reversible intercalation mechanism of zinc ions and high electrical conductivity in the 2D heterostructure. Electrochemical tests confirm excellent Zn²⁺ migration kinetics and ideal pseudocapacitive behaviors. As a consequence, Cu-HHTP/MX shows a superior rate performance (260.1 mAh g⁻¹ at 0.1 A g⁻¹ and 173.1 mAh g⁻¹ at 4 A g⁻¹) and long-term cycling stability of 92.5 % capacity retention over 1000 cycles at 4 A g⁻¹.     

One-Pot Synthesis of Heterobimetallic Metal–Organic Frameworks (MOFs) for Multifunctional Catalysis

A one-pot synthesis of bimetallic metal–organic frameworks (Co/Fe-MOFs) was achieved by treating stoichiometric amounts of Fe and Co salts with 2-aminoterephthalic acid (NH₂-BDC). Monometallic Fe (catalyst A) and Co (catalyst F) were also prepared along with mixed-metal Fe/Co catalysts (B–E) by changing the Fe/Co ratio. For mixed-metal catalysts (B–E) SEM energy-dispersive X-ray (EDX) analysis confirmed the incorporation of both Fe and Co in the catalysts. However, a spindle-shaped morphology, typically known for the Fe-MIL-88B structure and confirmed by PXRD analysis, was only observed for catalysts A–D. To test the catalytic potential of mixed-metal MOFs, reduction of nitroarenes was selected as a benchmark reaction. Incorporation of Co enhanced the activity of the catalysts compared with the parent NH₂-BDC-Fe catalyst. These MOFs were also tested as electrocatalysts for the oxygen evolution reaction (OER) and the best activity was exhibited by mixed-metal Fe/Co-MOF (Fe/Co batch ratio=1). The catalyst provided a current density of 10 mA cm⁻² at 410 mV overpotential, which is comparable to the benchmark OER catalyst (i.e., RuO₂). Moreover, it showed long-term stability in 1 m KOH. In a third catalytic test, dehydrogenation of sodium borohydride showed high activity (turnover frequency=87 min⁻¹) and hydrogen generation rate (67 L min⁻¹ g⁻¹ catalyst). This is the first example of the synthesis of bimetallic MOFs as multifunctional catalysts particularly for catalytic reduction of nitroarenes and dehydrogenation reactions.     

Ionic electro-active polymer actuator based on cobalt-containing nitrogen-doped carbon/conducting polymer soft electrode

Nanoscale cobalt-containing nitrogen-doped porous carbon (CoNC) materials were prepared by thermolysis of a zeolitic imidazolate framework (ZIF), ZIF-67, at different temperatures and their application for ionic electro-active polymer (EAP) actuator was evaluated. CoNC-700, which was obtained from ZIF-67 pyrolysis at 700 °C, exhibits specific surface area of 753.86 m² g⁻¹, pore volume of 0.5768 cm³ g⁻¹, and specific capacitance of 120.7 F∙g⁻¹. CoNC/conducting polymer soft electrode were fabricated by unitizing effective interaction of CoNC with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). High-performance ionic actuators were developed for the first time using this CoNC/PEDOT:PSS soft electrode. The developed ionic EAP actuator exhibited large peak-to-peak displacement of 20.4 mm and high bending strain of 0.28% (3 V and 0.1 Hz). Therefore, ZIFs or metal organic frameworks (MOFs) can be applied to provide significant improvements in EAP actuators, which can play key roles as technological advances toward bioinspired actuating devices required for next-generation soft and wearable electronics.     

Isostructural NiII Metal–Organic Frameworks (MOFs) for Efficient Electrocatalysis of Oxygen Evolution Reaction and for Gas Sorption Properties

Design and synthesis of stable, active and cost-effective electrocatalyst for water splitting applications is an emerging area of research, given the depletion of fossil fuels. Herein, two isostructural Ni^II redox-active metal–organic frameworks (MOFs) containing flexible tripodal trispyridyl ligand ( L ) and linear dicarboxylates such as terephthalate (TA) and 2-aminoterphthalate (H₂NTA) are studied for their catalytic activity in oxygen evaluation reaction (OER). The 2D-layered MOFs form 3D hydrogen bonded frameworks containing one-dimensional hydrophilic channels that are filled with water molecules. The electrochemical studies reveal that MOFs display an efficient catalytic activity towards oxygen evolution reaction in alkaline conditions with an overpotential as low as 356 mV. Further, these 2D-MOFs exhibit excellent ability to adsorb water vapor (180–230 cc g⁻¹ at 273 K) and CO₂ (33 cc g⁻¹ at 273 K). The presence of hydrophilic functionality in the frameworks was found to significantly enhance the electrocatalytic activity as well as H₂O sorption.     

Coordination-Modulated Metal Tetrathiafulvalene Octacarboxylate Frameworks for High-Performance Lithium-Ion Battery Anodes

Modulation of the ligands and coordination environment of metal–organic frameworks (MOFs) has been an effective and relatively unexplored avenue for improving the anode performance of lithium-ion batteries (LIBs). In this study, three MOFs are synthesized, namely, M₄(o-TTFOB)(bpm)₂(H₂O)₂ (where M is Mn, Zn, and Cd; o-H₈TTFOB is ortho-tetrathiafulvalene octabenzoate; and bpm is 2,2′-bipyrimidine), based on a new ligand o-H₈TTFOB with two adjacent carboxylates on one phenyl, which allows us to establish the impact of metal coordination on the performance of these MOFs as anode materials in LIBs. Mn-o-TTFOB and Zn-o-TTFOB, with two more uncoordinated oxygen atoms from o-TTFOB⁸⁻, show higher reversible specific capacities of 1249 mAh g⁻¹ and 1288 mAh g⁻¹ under 200 mA g⁻¹ after full activation. In contrast, Cd-o-TTFOB shows a reversible capacity of 448 mAh g⁻¹ under the same condition due to the lack of uncoordinated oxygen atoms. Crystal structure analysis, cyclic voltammetry measurements of the half-cell configurations, and density functional theory calculations have been performed to explain the lithium storage mechanism, diffusion kinetics, and structure-function relationship. This study demonstrates the advantages of MOFs with high designability in the fabrication of LIBs.     

Boosting the Iodine Adsorption and Radioresistance of Th-UiO-66 MOFs via Aromatic Substitution

Effective capture of radioactive iodine is of paramount importance for the safe and long-term storage of fission products in the nuclear fuel cycle. Herein, a series of functionalized Th-UiO-66 MOFs was employed as a model to investigate the effects of substituents on iodine adsorption in both solution and vapor states. Sorption studies revealed that the electro-donating amino group exhibits the most positive role on increasing the removal rate of iodine from cyclohexane and the uptake capacity of iodine vapor. Particularly, the disubstituted Th-UiO-66-(NH₂)₂ can effectively remove 91.9 % of iodine (300 mg L⁻¹) from cyclohexane and capture 969 mg g⁻¹ iodine vapor, significantly higher than 59.6 % and 334 mg g⁻¹ of untagged Th-UiO-66, respectively. In addition, the substituent effect on the radiolytic stability of MOFs was for the first time investigated, leading to the unearthing of one of the most radioresistant MOFs Th-UiO-66-NH₂ reported to date.     

A hexaazatriphenylene-based porous organic polymer for high performance supercapacitor

Porous organic polymers (POPs) with high physiochemical stability and pseudocapacitive activity are crucial for supercapacitors with high specific capacitance and long cycle life. We report herein a hexaazatrinaphthylene-based POP (HPOP-1) for high-performance supercapacitor by introducing redox-active hexaazatrinaphthylene (HATN) moiety through Sonogashira–Hagihara coupling reaction. HATN moiety can undergo a proton-induced electron transfer redox reaction, which endows HPOP-1 with high pseudocapacitive activity. As electrode materials for supercapacitor application, HPOP-1 exhibits high specific capacitance (667 F g⁻¹ at 0.5 A g⁻¹) and long-term cyclic stability (90% capacitance retention after 10,000 cycles at 5 A g⁻¹) in a three-electrode system with 1 M H₂SO₄ as the electrolyte. In addition, HPOP-1 also exhibits a specific capacitance of 376 F g⁻¹ at 0.5 A g⁻¹ in 1 M KOH electrolyte. An asymmetric supercapacitor was further fabricated with HPOP-1 as negative electrode and rGO as positive electrode, respectively. The device delivers a specific capacitance of 63 F g⁻¹ at 0.5 A g⁻¹ and a rate performance of 37 F g⁻¹ at 5 A g⁻¹. Our work provides a facile approach for the design and preparation of pseudocapacitive POPs with high specific capacitance and long cycle life.     

Superprotonic Conductivity of MOFs Confining Zwitterionic Sulfamic Acid as Proton Source and Conducting Medium

A few metal–organic frameworks (MOFs), which typically use strong acids as proton sources, display superprotonic conductivity (≈10⁻¹ S cm⁻¹); however, they are rare due to the instability of MOFs in highly acidic conditions. For the first time, we report superprotonic conductivity using a moderately acidic guest, zwitterionic sulfamic acid (HSA), which is encapsulated in MOF-808 and MIL-101. HSA acts not only as a proton source but also as a proton-conducting medium due to its extensive hydrogen bonding ability and zwitterion effect. A new sustained concentration gradient method results in higher HSA encapsulation compared to conventional methods, producing 10HSA@MOF-808-(bSA)₂ and 8HSA@MIL-101. These MOFs show impressive superprotonic conductivity of 2.47×10⁻¹ and 3.06×10⁻¹ S cm⁻¹, respectively, at 85 °C and 98 % relative humidity, and maintain stability for 7 days.     

Non-enzyme electrochemical sensing fabrics and wearable applications based on bimetallic NiCo-MOFs

Portable sweat analysis devices for real-time monitoring of health-related biomarkers with great detection accuracy and high sensitivity are attracting public interest. Here, we report a flexible fabric sweat analysis devices bimetallic Metal Organic Frameworks (MOFs) for detection of glucose in sweat without any biological enzymes. The synergy between Ni²⁺ and Co²⁺ and the large surface area (424.41 m² g⁻¹) and high porosity (0.0542 cm³ g⁻¹) of NiCo-MOF make NiCo-MOF an interesting electrode modification material in the working electrode. Furthermore, the ultra-high porosity and huge surface area of the MOFs structure are required for electrocatalysts in alkaline media. On the basis of the above, we have developed a fabric-based analytical patch, which is sufficient for simultaneous real-time detection of glucose in sweat.     

Bimetallic Anionic Organic Frameworks with Solid-State Cation Conduction for Charge Storage Applications

A new phosphonate-based anionic bimetallic organic framework, with the general formula of A₄−Zn−DOBDP (wherein A is Li⁺ or Na⁺, and DOBDP⁶⁻ is the 2,5-dioxido-1,4-benzenediphosphate ligand) is prepared and characterized for energy storage applications. With four alkali cations per formula unit, the A₄−Zn−DOBDP MOF is found to be the first example of non-solvated cation conducting MOF with measured conductivities of 5.4×10⁻⁸ S cm⁻¹ and 3.4×10⁻⁸ S cm⁻¹ for Li₄- and Na₄- phases, indicating phase and composition effects of Li⁺ and Na⁺ shuttling through the channels. Three orders of magnitude increase in ionic conductivity is further attained upon solvation with propylene carbonate, placing this system among the best MOF ionic conductors at room temperature. As positive electrode material, Li₄−Zn−DOBDP delivers a specific capacity of 140 mAh g⁻¹ at a high average discharge potential of 3.2 V (vs. Li⁺/Li) with 90 % of capacity retention over 100 cycles. The significance of this research extends from the development of a new family of electroactive phosphonate-based MOFs with inherent ionic conductivity and reversible cation storage, to providing elementary insights into the development of highly sought yet still evasive MOFs with mixed-ion and electron conduction for energy storage applications.     

Optimizing Fe-Based Metal-Organic Frameworks through Ligand Conformation Regulation for Efficient Dye Adsorption and C2H2/CO2 Separation

Regulating the structure of metal-organic frameworks (MOFs) by adjusting the ligands reasonably is expected to enhance the interaction of MOFs on special molecules/ions, which has significant application value for the selective adsorption of guest molecules. Herein, two tricarboxylic ligands H₃L−Cl and H₃L−NH₂ were designed and synthesized based on the ligand H₃TTCA by replacing part of the benzene rings with C=C bonds and modifying the chlorine and amino groups on the 4-position of the benzene ring. Two 3D Fe-MOFs ( UPC-60-Cl and UPC-60-NH₂ ) with the new topology types were constructed. As the C=C bonds of the ligands have flexible torsion angles, UPC-60-Cl features three types of irregular 2D channels, while UPC-60-NH₂ has a cage with two types of windows on the surface. The synergistic effect of unique channels and modification of functional groups endows UPC-60-Cl and UPC-60-NH₂ with high adsorption capacity for organic dyes. Compound UPC-60-Cl shows high adsorption capacity for CV (147.2 mg g⁻¹), RHB (100.3 mg g⁻¹), and MO (220.9 mg g⁻¹), whereas UPC-60-NH₂ exhibits selective adsorption of MO (158.7 mg g⁻¹). Meanwhile, based on the diverse pore structure and modification of active sites, UPC-60-Cl and UPC-60-NH₂ show the selective separation of equimolar C₂H₂/CO₂. Therefore, reasonable regulation of organic ligands plays a significant role in guiding the structure diversification and performance improvement of MOFs.     

A Strategy for Constructing Pore-Space-Partitioned MOFs with High Uptake Capacity for C2 Hydrocarbons and CO2

Introduction of pore partition agents into hexagonal channels of MIL-88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4,4′-dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore-space partition. The Co₂V-pacs MOFs exhibit near or at record high uptake capacities for C₂H₂, C₂H₄, C₂H₆, and CO₂ among MOFs. The storage capacity of C₂H₂ is 234 cm³ g⁻¹ (298 K) and 330 cm³ g⁻¹ (273 K) at 1 atm for CPM-733-dps (the Co₂V-BDC form, BDC=1,4-benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low-energy-cost adsorbent regeneration. CPM-733-dps is stable and shows no loss of C₂H₂ adsorption capacity following multiple adsorption–desorption cycles.     

Two-Dimensional Germanium Sulfide Nanosheets as an Ultra-Stable and High Capacity Anode for Lithium Ion Batteries

Lithium ion batteries (LIBs) at present still suffer from low rate capability and poor cycle life during fast ion insertion/extraction processes. Searching for high-capacity and stable anode materials is still an ongoing challenge. Herein, a facile strategy for the synthesis of ultrathin GeS₂ nanosheets with the thickness of 1.1 nm is reported. When used as anodes for LIBs, the two-dimensional (2D) structure can effectively increase the electrode/electrolyte interface area, facilitate the ion transport, and buffer the volume expansion. Benefiting from these merits, the as-synthesized GeS₂ nanosheets deliver high specific capacity (1335 mAh g⁻¹ at 0.15 A g⁻¹), extraordinary rate performance (337 mAh g⁻¹ at 15 A g⁻¹) and stable cycling performance (974 mAh g⁻¹ after 200 cycles at 0.5 A g⁻¹). Importantly, our fabricated Li-ion full cells manifest an impressive specific capacity of 577 mAh g⁻¹ after 50 cycles at 0.1 A g⁻¹ and a high energy density of 361 Wh kg⁻¹ at a power density of 346 W kg⁻¹. Furthermore, the electrochemical reaction mechanism is investigated by the means of ex-situ high-resolution transmission electron microscopy. These results suggest that GeS₂ can use to be an alternative anode material and encourage more efforts to develop other high-performance LIBs anodes.     

Carbonyl-rich Poly(pyrene-4,5,9,10-tetraone Sulfide) as Anode Materials for High-Performance Li and Na-Ion Batteries

Organic carbonyl electrode materials are widely employed for alkali metal-ion secondary batteries in terms of their sustainability, structure designability and abundant resources. As a typical redox-active organic electrode materials, pyrene-4, 5, 9, 10-tetraone (PT) shows high theoretical capacity due to the rich carbonyl active sites. But its electrochemical behavior in secondary batteries still needs further exploration. Herein, PT-based linear polymers (PPTS) is synthesized with thioether bond as bridging group and then employed as an anode material for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). As expected, PPTS shows improved conductivity and insolubility in the non-aqueous electrolyte. When used as an anode material for LIBs, PPTS delivers a high reversible specific capacity of 697.1 mAh g⁻¹ at 0.1 A g⁻¹ and good rate performance (335.4 mAh g⁻¹ at 1 A g⁻¹). Moreover, a reversible specific capacity of 205.2 mAh g⁻¹ at 0.05 A g⁻¹ could be obtained as an anode material for SIBs.     

Synthesis of Co3O4/Carbon Heteroaerogels with Ultrahigh Capacitance via Polyethyleneimine Intercalation of Co2BIM4 Nanosheets

The development of metal–organic frameworks (MOFs)-based supercapacitors have attracted intense concentration in recent years due to their regularly arranged porous and tunable pore sizes. However, the performance of the MOFs-derived supercapacitors is also low because of their poor electrical conductivity and rarely accessible active sites. In the present work, we developed a Co-MOF (namely Co₂BIM₄, BIM=benzimidazole) nanosheets derived Co₃O₄/nitrogen-doped carbon (Co₂BIM₄-Co₃O₄/NC) heteroaerogel as a novel supercapacitor electrode. The 3D Co₂BIM₄-Co₃O₄/NC heteroaerogels were obtained by directly intercalating polyethyleneimine (PEI) into the interlayers of Co₂BIM₄ nanosheets and following by carbonizing the resulting Co₂BIM₄/PEI composite. The Co₂BIM₄-Co₃O₄/NC electrode possessed 3D conductive framework with an overlapped hetero-interface and expanded interlayers, leading to fast and stable charge transfer/diffusion and an enhanced pseudocapacitance performance. Therefore, the Co₂BIM₄-Co₃O₄/NC electrode showed ultrahigh capacitance of 2568 F g⁻¹ at 1 A g⁻¹, 1747 F g⁻¹ at 10 A g⁻¹, and excellent long cycling time with a capacitance preservation of 92.7 % following 10000 cycles at 10 A g⁻¹, which is very promising for applications in supercapacitors and other energy storage devices.     

Pseudocapacitive Lithium Storage of Cauliflower-Like CoFe2O4 for Low-Temperature Battery Operation

Binary transition-metal oxides (BTMOs) with hierarchical micro–nano-structures have attracted great interest as potential anode materials for lithium-ion batteries (LIBs). Herein, we report the fabrication of hierarchical cauliflower-like CoFe₂O₄ (cl-CoFe₂O₄) via a facile room-temperature co-precipitation method followed by post-synthetic annealing. The obtained cauliflower structure is constructed by the assembly of microrods, which themselves are composed of small nanoparticles. Such hierarchical micro–nano-structure can promote fast ion transport and stable electrode–electrolyte interfaces. As a result, the cl-CoFe₂O₄ can deliver a high specific capacity (1019.9 mAh g⁻¹ at 0.1 A g⁻¹), excellent rate capability (626.0 mAh g⁻¹ at 5 A g⁻¹), and good cyclability (675.4 mAh g⁻¹ at 4 A g⁻¹ for over 400 cycles) as an anode material for LIBs. Even at low temperatures of 0 °C and −25 °C, the cl-CoFe₂O₄ anode can deliver high capacities of 907.5 and 664.5 mAh g⁻¹ at 100 mA g⁻¹, respectively, indicating its wide operating temperature. More importantly, the full-cell assembled with a commercial LiFePO₄ cathode exhibits a high rate performance (214.2 mAh g⁻¹ at 5000 mA g⁻¹) and an impressive cycling performance (612.7 mAh g⁻¹ over 140 cycles at 300 mA g⁻¹) in the voltage range of 0.5–3.6 V. Kinetic analysis reveals that the electrochemical performance of cl-CoFe₂O₄ is dominated by pseudocapacitive behavior, leading to fast Li⁺ insertion/extraction and good cycling life.     

Rechargeable Sodium-Ion Battery Based on Polyazaacene Analogue Anode

The high theoretical specific capacity, strong structural designability and relatively inexpensive manufacturing cost make the exploration of organic electrode materials more attractive in recent years. In this article, owing to the large π-conjugated structure, plenty of nitrogen heteroatoms and multiring aromatic system, polyazaacene analogue poly(1,6-dihydropyrazino[2,3 g]quinoxaline-2,3,8-triyl-7-(2H)-ylidene-7,8-dimethylidene) (PQL) was applied as the anode in sodium-ion batteries (SIBs). PQL was almost insoluble in conventional liquid organic electrolyte (1 M NaClO₄ in ethylene carbonate (EC)/dimethyl carbonate (DMC) (v:v=1 : 1) with 5 % fluoroethylene carbonate (FEC)), which strongly improved its cycle stability. The initial discharge capacity was obtained to be 1825 mAh g⁻¹ at the current density of 100 mA g⁻¹ and stabilized at 317 mAh g⁻¹ after 400 cycles with the coulombic efficiency as high as 97 %. It not only showed good rate capability at high current densities (202, 183 mAh g⁻¹ at 1 A g⁻¹ and 1.5 A g⁻¹) but also had a superior energy density around 290 Wh kg⁻¹.     

Reticular Synthesis of Metal-Organic Frameworks by 8-Connected Quadrangular Prism Ligands for Water Harvesting

Utilization of rigid, highly connected organic linkers is critical for the reticular synthesis of functional metal–organic frameworks (MOFs). However, highly-stable MOFs (e.g. Al/Cr/Zr-based MOFs) based on rigid ligands with more than 6 coordinating functions have been rarely achieved thus far. Herein, we describe the construction of two bcu Zr-based MOFs (named ZrMOF-1 and ZrMOF-2) from peripherally extended pentiptycene ligands (H₈PEP-1 and H₈PEP-2) with rigid quadrangular prism shape possessing 8 carboxylic groups at the prism vertices. Particularly, ZrMOF-1 exhibits microporous structure with large Bruno-Emmett-Teller surface area and high water stability, endowing it a promising water harvesting material with a high water uptake capacity of 0.83 g_H2O g_MOF⁻¹ at P/P₀=0.90 and 25 °C, a steep uptake at a low P/P₀ of 0.30, and excellent durability over 500 water adsorption-desorption cycles. Moreover, self-consistent charge density functional tight-binding calculations were carried out, rationalizing the water adsorbing process and amount in ZrMOF-1.     

A Novel Aluminum-Based Metal-Organic Framework with Uniform Micropores for Trace BTEX Adsorption

Metal-organic frameworks (MOFs) are potential porous adsorbents for benzene, toluene, ethylbenzene and xylene (BTEX). A novel MOF, using low toxic aluminum (Al) as the metal, named as ZJU-620(Al), with uniform micropore size of 8.37±0.73 Å and specific surface area of 1347 m² g⁻¹, was synthesized. It is constructed by one-dimensional rod-shaped AlO₆ clusters, formate ligands and 4,4′,4′′-(2,4,6-trimethylbenzene-1,3,5-triyl) tribenzoic ligands. ZJU-620(Al) exhibits excellent chemical-thermal stability and adsorption for trace BTEX, e.g., benzene adsorption of 3.80 mmol g⁻¹ at P/P₀=0.01 and 298 K, which is the largest one reported. Using Grand Canonical Monte Carlo simulations and Single-crystal X-ray diffraction analyses, it was observed that the excellent adsorption could be attributed to the high affinity of BTEX molecules in ZJU-620(Al) micropores because the kinetic diameters of BTEX are close up to the pore size of ZJU-620(Al).     

Oxygen Vacancies-rich Manganese Oxide with Flower-like Nanosheets for High Performance Supercapacitors

Here, flower-like manganese oxide with enriched oxygen vacancies were reported for high performance supercapacitors. The moderate oxygen-vacancy were achieved by controlling annealing atmosphere. Benefiting from improving the conductivity and the density of active sites, MnO_x−Ar sample as an electrode material has remarkable specific capacity (339 mAh g⁻¹ at 0.5 A g⁻¹), extraordinary rate capability (90 % capacity retention at 1 A g⁻¹), and good cycling property (90 % capacity retention at 1 A g⁻¹ after 5000 cycles). Additionally, the asymmetric supercapacitor (ASC) was assembled which used the MnO_x−Ar sample as cathode and Kochen Black (KB) as anode, which displayed a remarkable energy density (16 Wh kg⁻¹) at a large power density (7593 W kg⁻¹). These results, on the one hand, further expand the application of MnO₂-based materials, and on the other hand, offer a new perspective for the oxygen non-stoichiometry in material electrochemistry.