Synthesis and Characterization of Antimony(III) Complexes of Thioamides,and Crystal Structure of {[Sb(Imt)2Cl2]2((2‐Imt)}Cl2(Imt=Imidazolidine‐2‐thione)

Antimony(III) complexes of thioamides [thioamides=thiourea (Tu), N,N′‐dimethylthiourea (Dmtu), tetramethylthiourea (Tmtu), imidazolidine‐2‐thione (Imt) and diazinane‐2‐thione (Diaz)] with the general formulae, Sb(thione)_nCl₃ (n=1, 2, 2.5, 3) were prepared and characterized by elemental analysis, IR and NMR (¹H, ¹³C) spectroscopic methods. The spectral data of the complexes are consistent with the coordination of the thiones to antimony(III). The crystal structure of one of them, {[Sb(Imt)₂Cl₂]₂(μ₂‐Imt)}Cl₂ ( 1 ), was determined by X‐ray crystallography, which shows that the complex is dinuclear consisting of two [Sb(Imt)₂Cl₂] units bridged by an Imt molecule. In 1 , the antimony atom is bonded to two chlorine atoms, two sulfur atoms of coordinated Imt molecules and one sulfur atom of a bridging Imt molecule. The antimony environment can be considered to be distorted octahedral with one Cl^? ion weakly bound to antimony.     

Synthesis,Characterization, and Singlet Oxygen Sensitization by Antimony (III/V) Corrole Complexes

The synthesis, structural, spectroscopic characterization, and DFT/TD-DFT calculations of antimony corroles are reported herein. The studied complexes can be described as [(Corr)Sb^III] and [(Corr)(oxo)Sb^V]₂, where Corr is the trianion of corrole. All these complexes are diamagnetic in nature as is evident from sharp peaks with normal chemical shifts in the ¹H NMR spectra. Single crystal XRD analysis reveals that the antimony(V) corrole complex is the bis-μ-oxo-bridged dinuclear antimony(V). Both the tetra and hexa-coordinated [(Corr)Sb^III] and [(Corr)(oxo)Sb^V]₂ antimony complexes adopt domed-structure with weak d-π electron coupling. The Sb−O bond distances in the co-facial dimer of [(Corr)(oxo)Sb^V]₂ are 1.9802(16) Å (DFT: 2.0141 Å ) (for Sb1−O1), and 1.9639(17) Å (DFT: 1.9957 Å ) (for Sb2−O2) respectively. We observed that even though iodosobenzene is frequently used to oxidize [(Corr)Sb^III] species, the oxidation of [(Corr)Sb^III] is indeed very facile in nature and it even occurred in the air-equilibrated CHCl₃ solution while storing for few days. Excitation of these antimony (III/V) corrole complexes in DCM/MeOH (1 : 1) at 77 K results in red emission with maxima at 640–720 nm. The singlet oxygen production of [(Corr)(oxo)Sb^V]₂ has a quantum yield of 69 % and is two times higher than the analogous [(Corr)Sb^III] derivatives.     

Preparation and Characterization of Dinuclear Chromium(III) Complexes of a Hexadentate Tetraaza‐Dithiophenolate Ligand

The ability of the tetraaza‐dithiophenolate ligand H₂L² (H₂L² = N,N′‐Bis‐[2‐thio‐3‐aminomethyl‐5‐tert‐butyl‐benzyl]propane‐1,3‐diamine) to form dinuclear chromium(III) complexes has been examined. Reaction of Cr^IICl₂ with H₂L² in methanol in the presence of base followed by air‐oxidation afforded cis,cis‐[(L²)Cr^III₂(μ‐OH)(Cl)₂]⁺ ( 1a ) and trans,trans‐[(L²)Cr^III₂(μ‐OH)(Cl)₂]⁺ ( 1b ). Both compounds contain a confacial bioctahedral N₂ClCr^III(μ‐SR)₂(μ‐OH)Cr^IIIClN₂ core. The isomers differ in the mutual orientation of the coligands and the conformation of the supporting ligand. In 1a both Cl^? ligands are cis to the bridging OH function. In 1b they are in trans‐positions. Reaction of the hydroxo‐bridged complexes with HCl yielded the chloro‐bridged cations cis,cis‐[(L²)Cr^III₂(μ‐Cl)(Cl)₂]⁺ ( 2a ) and trans,trans‐[(L²)Cr^III₂(μ‐Cl)(Cl)₂]Cl ( 2b ), respectively. These bridge substitutions proceed with retention of the structures of the parent complexes 1a and 1b .     

SYNTHESIS AND CHARACTERIZATION OF ANTI-2-FURAN CARBOXALDOXIME COMPLEXES WITH COBALT(II), COPPER(II & I) AND SILVER(I)

Abstract

The ligand, 2-furan carboxaldoxime exists in two geometrical isomeric forms: anti-(β-form) and syn-(α-form). Six different complexes of Co(II), Cu(II), Cu(I) and Ag(I) with anti-2-furan carboxaldoxime (FDH) have been prepared and characterized by elemental analysis, molecular weights, conductance studies, magnetic moments and infra-red spectral studies. These are [Co(FDH)₄Cl₂], [Co(FD)₂], [Cu(CH₃COO)₂ (FDH)]₂, [Cu(FD)(OH)]₂, Cu(FDH)₂ Cl and AgNO₃·2FDH. Under the similar conditions, syn- form does not form any complex with these metal ions. The complexes [Co(FDH)₄Cl₂] and [Co(FD)₂] are neutral, monomeric and para-magnetic (μ=4.88 and 4.52 BM respectively); the former may be considered as octahedral with FDH acting as monodentate, and the latter as tetrahedral with FD^? as a bidentate ligand. Both the Cu(II) complexes are neutral, dimeric, weakly para-magnetic (μ=0.44 and 0.28 BM respectively) with the bridging acetato groups in [Cu(CH₃ COO)₂ (FDH)]₂ and with bridging hydroxo groups in [Cu(FD)(OH)]₂. The Cu(I) complex may be polymeric, being insoluble in most solvents. The Ag(I) compound is cationic 1:1 electrolyte in nitrobenzene. In all these complexes the ligand functions as monodentate and/or bidentate, coordinating with furan oxygen and oxime oxygen in the latter case. The C[sbnd]O[sbnd]C stretching frequency of furan may be taken as the criterion for the denticity of this ligand which is observed at 1240 cm^?1 (in the free ligand). A shift to lower frequency is observed in the complex if the ligand acts as bidentate. However this frequency is not affected if the ligand acts as monodentate coordinating through the oxime oxygen atom. The ligand has been shown to be present in the ionized and/or unionized form in these complexes.     

FeIII in a high-spin state in bis(5-bromosalicylaldehyde 4-ethylthiosemicarbazonato-κ3O,N1,S)ferrate(III) nitrate monohydrate,the first example of such a cationic FeIII complex unit

The synthesis and crystal structure (100 K) of the title compound, [Fe(C₁₀H₁₁BrN₃OS)₂]NO₃·H₂O, is reported. The asymmetric unit consists of an octahedral [Fe^III(HL)₂]⁺ cation, where HL^? is H-5-Br-thsa-Et or 5-bromosalicylaldehyde 4-ethylthiosemicarbazonate(1?) {systematic name: 4-bromo-2-[(4-ethylthiosemicarbazidoidene)methyl]phenolate}, a nitrate anion and a noncoordinated water molecule. Each HL^? ligand binds via the thione S, the imine N and the phenolate O atom, resulting in an Fe^IIIS₂N₂O₂ chromophore. The ligands are orientated in two perpendicular planes, with the O and S atoms in cis and the N atoms in trans positions. This [Fe(HL)₂](anion)·H₂O compound contains the first known cationic Fe^III entity containing two salicylaldehyde thiosemicarbazone derivatives. The Fe^III ion is in the high-spin state at 100 K. In addition, a comparative IR spectroscopic study of the free ligand and the ferric complex is presented, demonstrating that such an analysis provides a quick identification of the degree of deprotonation and the coordination mode of the ligand in this class of metal compounds. The variable-temperature magnetic susceptibility measurements (5–320 K) are consistent with the presence of a high-spin Fe^III ion with a zero-field splitting D = 0.439 (1) cm^?1.     

Ni(II) and Cu(II) complexes of new unsymmetrical N2O2 Schiff bases derived from 3-(2-aminobenzylimino)-1-phenylbutan-1-ol: synthesis,structure, antibacterial properties,and electrochemistry

Two new N₂O₂ unsymmetrical Schiff bases, H₂L¹ = 3-[({o-[(E)-(o-hydroxyphenyl)methylideneamino]phenyl}methyl)imino]-1-phenyl-1-buten-1-ol and H₂L² = 3-[({o-[(E)-(2-hydroxy-1-naphthyl)methylideneamino]phenyl}methyl)imino]-1-phenyl-1-buten-1-ol, and their copper(II) and nickel(II) complexes, [CuL¹] (1), [CuL²] (2), [NiL¹] (3), and [NiL²] (4), have been synthesized and characterized by elemental analyses and spectroscopic methods. The crystal structures of these complexes have been determined by X-ray diffraction. The coordination geometry around Cu(II) and Ni(II) centers is described as distorted square planar in all complexes with the CuN₂O₂ coordination more distorted than the Ni ones. The electrochemical studies of these complexes indicate a good correlation between the structural distortion and the redox potentials of the metal centers. The ligand and metal complexes were also screened for their in vitro antibacterial activity.     

Synthesis, characterization and antimicrobial studies of mixed ligand silver(I) complexes of triphenylphosphine and heterocyclic thiones: Crystal structure of bis[{(μ-diazinane-2-thione)(diazinane-2-thione)(triphenylphosphine)silver(I) nitrate}]

Mixed ligand silver(I) complexes of triphenylphosphine and heterocyclic thiones (imidazolidine-2-thione (Imt), diazinane-2-thione (Diaz) and 2-mercaptopyridine (Mpy)) having the general formulae [(Ph₃P)Ag(thione)₂]NO₃ and [(Ph₃P)₂Ag(thione)]NO₃ were prepared and characterized by elemental analysis, IR and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. The crystal structure of one of the complexes, [Ag(Ph₃P)(Diaz)₂]₂(NO₃)₂ (1) was determined by X-ray crystallography. The title complex (1) is dinuclear, having each silver atom coordinated to three thione sulfur atoms of Diaz and to one phosphorus atom of PPh₃ in a nearly tetrahedral environment, with an average P-Ag-S bond angle of 108.5°. The spectral data of the complexes are consistent with sulfur coordination of the thiones to silver(I). Antimicrobial activities of the complexes were evaluated by minimum inhibitory concentrations and the results showed that the complexes exhibit a wide range of activity against two gram-negative bacteria (E. coli, P. aeruginosa) and molds (A. niger, P. citrinum), while the activities were poor against yeasts (C. albicans, S. cerevisiae).     

Synthesis,spectral, thermal and crystallographic investigations on oxovanadium(IV) and manganese(III) complexes derived from heterocyclic β-diketone and 2-amino ethanol

Novel mononuclear oxovanadium(IV) and manganese(III) complexes [VO(L¹)₂·H₂O] (1); [VO(L²)₂·H₂O] (2); [VO(L³)₂·H₂O] (3); [Mn(L¹)₂]ClO₄·H₂O (4); [Mn(L²)₂] ClO₄·H₂O (5); [Mn(L³)₂]ClO₄·H₂O (6) were prepared by condensation of 1 mol of VOSO₄·5H₂O or Mn(OAc)₃· 2H₂O with 2 mol of ligand HL¹, HL² or HL³ (where HL¹ = 4-[(2-hydroxy-ethylamino)-methylene]-5-methyl-2- phenyl-2,4-dihydro-pyrazol-3-one; HL²=4-[(2-hydroxy-ethylamino)-methylene]-5-methyl-2-p-tolyl-2,4-dihydro-pyrazol-3-one; HL³=4-{4-[(2-hydroxy-ethyl-amino)-methyl]-3-methyl-5-oxo-4,5-dihydropyrazol-1-yl} benzene sulfonic acid). The resulting complexes were characterized by elemental analyses, molar conductance, magnetic and decomposition temperature measurements, electron spin resonance, FAB mass, IR and electronic spectral studies. From TGA, DTA and DSC, the thermal behaviour and degradation kinetic were studied. Electronic spectra and magnetic susceptibility measurements indicate distorted octahedral stereochemistry of oxovanadium(IV) complexes and regular octahedral stereochemistry of manganese(III) complexes. Hamiltonian and bonding parameters found from ESR spectra indicate the metal ligand bonding is partial covalent. The X-ray single crystal determination of one of the representative ligand was carried out which suggests existence of amine-one tautomeric form in the solid state. The ¹H-NMR spectra support the existence of imine-ol form in solution state. The LC-MS studies sustain the¹H-NMR result. The electronic structure of the same representative ligand was optimized using 6-311G basis set at HF level ab initio studies to predict the coordinating atoms of the ligand.     

Novel platinum(II) and (IV) complexes of naphthaldimine schiff bases

Naphthaldimines containing N₂O₂ donor centers react with platinum(II) and (IV) chlorides to give two types of complexes depending on the valence of the platinum ion. For [Pt(II)], the ligand is neutral, [(H₂L¹)PtCl₂]·3H₂O (1) and [(H₂L³)₂Pt₂Cl₄]·5H₂O (3), or monobasic [(HL²)₂Pt₂Cl₂]·2H₂O (2) and [(HL⁴)₂Pt]·2H₂O (4). These complexes are all diamagnetic having square-planar geometry. For [Pt(IV)], the ligand is dibasic, [(L¹)Pt₂Cl₄(OH)₂]·2H₂O (5), [(L²)Pt₃Cl₁₀]·3H₂O (6), [(L³)Pt₂Cl₄(OH)₂]·C₂H₅OH (7) and [(L⁴)Pt₂Cl₆]·H₂O (8). The Pt(IV) complexes are diamagnetic and exhibit octahedral configuration around the platinum ion. The complexes were characterized by elemental analysis, UV-Vis and IR spectra, electrical conductivity and thermal analyses (DTA and TGA). The molar conductances in DMF solutions indicate that the complexes are non-ionic. The complexes were tested for their catalytic activities towards cathodic reduction of oxygen.     

Reductive Catenation of Phosphine Antimony Complexes

Reactions of triarylphosphines with fluoroantimony(III) triflates give phosphine antimony(III) complexes, which undergo spontaneous reductive elimination of fluorophosphonium cations. The resulting phosphine antimony(I) complexes catenate to give the first examples of cationic antimony bicyclic compounds, [(R₃P)₄Sb₆]⁴⁺, featuring a bicyclo[3.1.0]hexastibine framework stabilized by four phosphine ligands. The unprecedented 14‐electron redox process illustrates the generality of the reductive catenation method.     

A square‐planar hydrated cationic tetrakis(methimazole)gold(III) complex

The cationic pseudo‐square‐planar complex tetrakis(1‐methyl‐2,3‐dihydro‐1H‐imidazole‐2‐thione‐κS)gold(III) trichloride sesquihydrate, [Au(C₄H₆N₂S)₄]Cl₃·1.5H₂O, was isolated as dark‐red crystals from the reaction of chloroauric acid trihydrate (HAuCl₄·3H₂O) with four equivalents of methimazole in methanol. The Au^III atoms reside at the corners of the unit cell on an inversion center and are bound by the S atoms of four methimazole ligands in a planar arrangement, with S—Au—S bond angles of approximately 90°.     

Electrochemical Synthesis and Characterization of Tin(IV) Complexes of Dianionic Terdentate Schiff Base Ligands

Tin(IV) complexes of the series of dianionic terdentate Schiff bases N‐[(2‐pyrroyl)methylidene]‐N′‐tosylbenzene‐1,2‐diamine, (H₂L¹), N‐[(2‐hydroxyphenyl)methylidene]‐N′‐tosylbenzene‐1,2‐diamine (H₂L²) and some R substituted 2‐{[(2‐hydroxyphenyl)imino]methyl}phenols [R = H (H₂L³), 4,6‐(OCH₃)₂ (H₂L⁴), 3‐(OC₂H₅) (H₂L⁵) and 3,5‐Br₂ (H₂L⁶)] have been synthesized. The compounds were obtained by the electrochemical oxidation of a tin anode in a cell containing an acetonitrile solution of the corresponding ligand. The complex [SnL¹₂] was also obtained by reaction of SnCl₂·2H₂O and H₂L¹ in methanol in the presence of triethylamine. The crystal structure of the ligand [H₂L⁶] and the complexes [SnL¹₂] (1) , [SnL²₂] (2) , [SnL³₂] (3) and [SnL⁶₂] (6) were determined by X‐ray diffraction. In the complexes, the tin atom is in an octahedral environment coordinated by two dianionic terdentate ligands. Spectroscopic data for the complexes (IR, ¹H and ¹¹⁹Sn NMR and mass spectra) are discussed and related to structural information.     

Preparation, photophysical, and electrochemical properties of two polynuclear Ru(II) polypyridyl complexes containing imidazole-based ligands

A tripodal ligand L¹ and dipodal ligand L² containing imidazole rings have been synthesized by the reaction of 1,10-phenanthroline-5,6-dione with 2,2??-bipyridine-4,4??-dicarbaldehyde and 4-methyl-2,2??-bipyridine-4??-carbaldehyde, respectively, in the presence of ammonium acetate. Both ligands have two kinds of nonequivalent coordinating sites: one involving the phenanthroline moiety and the other involving the 2,2??-bipyridine moiety. The Ru(II) complexes, [(bpy)₆Ru₃(L¹)](PF₆)₆ and [(bpy)₄Ru₂(L²)](PF₆)₄ (bpy?=?2,2??-bipyridine), have been obtained by refluxing Ru(bpy)₂Cl₂·2H₂O with each ligand in solution. The two complexes display MLCT absorptions at 465 and 480?nm, respectively, and emission at 665 and 675?nm, respectively, in CH₃CN solution. Electrochemical studies of both complexes show one Ru(II)-centered oxidation at around 1.29?V and three ligand-centered reductions.     

DNA-binding properties and antioxidant activity of lanthanide complexes with the Schiff base derived from 3-carbaldehyde chromone and isonicotinyl hydrazine

Structural analyses indicate that the ligand and lanthanide ions form mononuclear 10-coordinate ([Ln L₂ · (NO₃)₂] · NO₃ [Ln(III) = La, Sm, Nd, and Yb; L is chromone-3-carbaldehyde-(isonicotinoyl) hydrazone) complexes with 1 : 2 metal-to-ligand stoichiometry. DNA-binding studies show that the ligand and its lanthanide complexes can bind to calf thymus DNA via an intercalation mode with binding constants of 10⁵ (mol L^?1)^?1, and the lanthanide complexes bind stronger than the free ligand alone. Antioxidant activities of the ligand and lanthanide complexes were determined by superoxide and hydroxyl radical scavenging methods in vitro. The ligand and complexes possess strong scavenging effects, and the lanthanide complexes show stronger antioxidant activities than the ligand and some standard antioxidants, such as vitamin C.     

A Diruthenium Complex of an N-Pyridyl-o-aminophenol Derivative: A Route to Mixed Valency

An N-pyridyl-o-aminophenol derivative that stabilises mixed-valence states of ruthenium ions is disclosed. A diruthenium complex, [(L_IQ⁰)Ru₂Cl₅] ⋅ MeOH ( 1⋅ MeOH) is successfully isolated, in which L_IQ⁰ is the o-iminobenzoquinone form of 2-[(3-nitropyridin-2-yl)amino]phenol (L_APH₂). In 1 , L_IQ⁰ oriented towards one ruthenium centre is a non-innocent NO-donor redox ligand, whereas another oriented towards another ruthenium centre is an innocent pyridine-donor redox ligand. Complex 1 is a diruthenium(II,III) mixed-valence complex, [Ru^II(L_IQ⁰)(μ-Cl)₂Ru^III], with a minor contribution from the diruthenium(III,III) state. [Ru^III(L_ISQ^.−)(μ-Cl)₂Ru^III] contains L_ISQ^.−, which is the o-iminobenzosemiquinonate anion radical form of the ligand. Complexes 1 ⁻ and 1 ⁺ are diruthenium(II,II), [Ru^II(L_IQ⁰)(μ-Cl)₂Ru^II], and diruthenium(III,III), [Ru^III(L_IQ⁰)(μ-Cl)₂Ru^III], complexes, respectively, of L_IQ⁰. Complex 1 ²⁻ is a diruthenium(II,II) complex of the o-iminobenzosemiquinonate anion radical (L_ISQ^.−), [Ru^II(L_ISQ^.−)(μ-Cl)₂Ru^II], with a minor contribution from the diruthenium(III,II) form, [Ru^III(L_AP²⁻)(μ-Cl)₂Ru^II]. Complex 1 ²⁺ is a diruthenium(III,IV) mixed-valence complex of L_IQ⁰, [Ru^III(L_IQ⁰)(μ-Cl)₂Ru^IV]. Complexes 1 and 1 ²⁺ exhibit inter-valence charge-transfer transitions at λ=1300 and 1370 nm, respectively.     

One‐Step Versus Multistep Equilibrium of Carbazole‐Bridged Dinuclear Zinc(II) Complex Formation: Metal‐Assisted π‐Association and ‐Dissociation Processes

This work demonstrates a selection criteria that determines whether molecular assembly occurs through a one‐step or stepwise manner in ligand‐bridged dinuclear zinc(II) (Zn²⁺) complex formation, which is associated with the π stacking of building blocks. The building blocks of carbazole ligands ( L¹ and L⁴ ) that contain two imidazole moieties at the 3,6‐positions form 4:2 complexes (i.e., [ L ]₄?(Zn²⁺)₂) at a molar ratio of 0.50 ([Zn²⁺]/[ L ]₀=0.50), thereby providing π stacking between the carbazole ligands. At the molar ratio of 0.67 ([Zn²⁺]/[ L ]₀=0.67), the 4:2 complexes change to 3:2 complexes (i.e., [ L ]₃?(Zn²⁺)₂) with no π‐stacked carbazole unit. In contrast, when the imidazole groups in L¹ are replaced with benzoimidazole groups ( L³ ), L³ also yields the 4:2 complex [( L³ )₄?(Zn²⁺)₂] at a molar ratio of 0.50. However, there is no structural transition from ( L³ )₄?(Zn²⁺)₂ to other complex species above a molar ratio of 0.50. Similarly, when two imidazole groups are introduced into the carbazole ring at 2,7‐positions ( L⁵ ), L⁵ also gives the 4:2 complex [( L⁵ )₄?(Zn²⁺)₂] that shows no structural transition to other complex species at a higher molar ratio.     

Synthesis,crystal structure,and antibacterial activity of mononuclear nickel(II) and cobalt(III) Schiff-base complexes

Four new mononuclear complexes, [Ni(L¹)(NCS)₂] (1), [Ni(L²)(NCS)₂] (2), [Co(L¹)(N₃)₂]ClO₄ (3), and [Co(L²)(N₃)₂]ClO₄ (4), where L¹ and L² are N,N′-bis[(pyridin-2-yl)methylidene]butane-1,4-diamine and N,N′-bis[(pyridin-2-yl)benzylidene]butane-1,4-diamine, respectively, have been prepared. The syntheses have been achieved by reaction of the respective metal perchlorate with the tetradentate Schiff bases, L¹ and L², in presence of thiocyanate (for 1 and 2) or azide (for 3 and 4). The complexes have been characterized by microanalytical, spectroscopic, single crystal X-ray diffraction and other physicochemical studies. Structural studies reveal that 1–4 are distorted octahedral geometries. The antibacterial activity of all the complexes and their constituent Schiff bases have been tested against Gram-positive and Gram-negative bacteria.     

Palladium(II)-Based Self-Assembled Heteroleptic Coordination Architectures: A Growing Family

Metal-driven self-assembly is one of the most effective approaches to lucidly design a large range of discrete 2D and 3D coordination architectures/complexes. Palladium(II)-based self-assembled coordination architectures are usually prepared by using suitable metal components, in either a partially protected form (PdL′) or typical form (Pd; charges are not shown), and designed ligand components. The self-assembled molecules prepared by using a metal component and only one type of bi- or polydentate ligand (L) can be classified in the homoleptic series of complexes. On the other hand, the less explored heteroleptic series of complexes are obtained by using a metal component and at least two different types of non-chelating bi- or polydentate ligands (such as L^a and L^b). Methods that allow the controlled generation of single, discrete heteroleptic complexes are less understood. A survey of palladium(II)-based self-assembled coordination cages that are heteroleptic has been made. This review article illustrates a systematic collection of such architectures and credible justification of their formation, along with reported functional aspects of the complexes. The collected heteroleptic assemblies are classified here into three sections: 1) [(PdL′)_m(L^a)_x(L^b)_y]-type complexes, in which the denticity of L^a and L^b is equal; 2) [(PdL′)_m(L^a)_x(L^b)_y]-type complexes, in which the denticity of L^a and L^b is different; and 3) [Pd_m(L^a)_x(L^b)_y]-type complexes, in which the denticity of L^a and L^b is equal. Representative examples of some important homoleptic architectures are also provided, wherever possible, to set a background for a better understanding of the related heteroleptic versions. The purpose of this review is to pave the way for the construction of several unique heteroleptic coordination assemblies that might exhibit emergent supramolecular functions.     

Synthesis,antimicrobial activity and molecular docking of di‐ and triorganotin (IV) complexes with thiosemicarbazide derivatives

Six organotin (IV) complexes with two ligands derived from 2,3‐butanedione and thiosemicarbazide have been synthesized and fully characterized by several spectroscopic techniques, including ¹¹⁹Sn NMR and single crystal X‐ray diffraction. Reactions of the ligand diacetyl‐2‐(thiosemicarbazone)‐3‐(3‐hydroxy‐2‐naphthohydrazone), L¹H₂, with SnR₂Cl₂ (R = Me, Bu, Ph) lead to the obtaining of complexes 1 – 3 with general formula [SnR₂L¹] (R = Me 1 , R = Bu 2 , R = Ph 3 ), in which the ligand is doubly deprotonated and behaves as a N₂SO donor, whereas from the reactions of diacetyl‐2‐thiosemicarbazone, HATs, with the same organotin precursors any complex could be isolated. By contrast, reaction of HATs with SnR₃Cl induces the ligand cyclization to form a 1,2,4‐triazine‐3‐thione that binds to the metal as a monoanionic donor in a mono or bidentate manner to form compounds 4 – 6 with formula [SnR₃L²] (R = Me 4 , R = Bu 5 , R = Ph 6 ). The antimicrobial activity of the ligands and the six complexes was tested towards bacteria and fungi, including clinical isolated strains. The results show that the ligands are devoid of activity, except HATs that displays activity against Bacillus subtilis. Conversely, the complexes exhibit good antimicrobial properties against Gram positive and negative bacteria, yeasts and moulds. The best results are obtained for complexes [SnBu₃L²] 5 and [SnPh₃L²] 6 , indicating that their more lipophilic nature could play an important role in the ease of microbial cell penetration. In some cases, these complexes display similar or higher activity than that of ampicillin and miconazole, used as antibacterial and antifungal positive controls, respectively. Docking study with DHPS protein (S. aureus) has shown that out of six drugs, the compound 6 has the best binding affinity (?8.5 Kcal/mol).     

Rhodium and Iridium Complexes of Anionic Thione and Selone Ligands Derived from Anionic N-Heterocyclic Carbenes

The lithium salts of anionic N-heterocyclic thiones and selones [{(WCA-IDipp)E}Li(toluene)] ( 1 : E=S; 2 : E=Se; WCA=B(C₆F₅)₃, IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene), which contain a weakly coordinating anionic (WCA) borate moiety in the imidazole backbone were reacted with Me₃SiCl, to furnish the silylated adducts (WCA-IDipp)ESiMe₃ ( 3 : E=S; 4 : E=Se). The reaction of the latter with [(η⁵-C₅Me₅)MCl₂]₂ (M=Rh, Ir) afforded the rhodium(III) and iridium(III) half-sandwich complexes [{(WCA-IDipp)E}MCl(η⁵-C₅Me₅)] ( 5 – 8 ). The direct reaction of the lithium salts 1 and 2 with a half or a full equivalent of [M(COD)Cl]₂ (M=Rh, Ir) afforded the monometallic complexes [{(WCA-IDipp)E}M(COD)] ( 9 – 12 ) or the bimetallic complexes [μ₂-{(WCA-IDipp)E}M₂(COD)₂(μ₂-Cl)] ( 13 – 16 ), respectively. The bonding situation in these complexes has been investigated by means of density functional theory (DFT) calculations, revealing thiolate or selenolate ligand character with negligible metal-chalcogen π-interaction.