锗酸锌纳米棒@石墨烯复合负极材料的制备及储锂性质

以二氧化锗和二水合醋酸锌为原料,采用水热法制备了锗酸锌纳米棒,并将其与氧化石墨烯复合,制备了石墨烯包覆的锗酸锌纳米棒三维复合材料. SEM等测试表明,锗酸锌纳米棒均匀地穿插在石墨烯片中,阻止了石墨烯片之间相互堆垛,而石墨烯片层之间相互连接,形成三维的空间导电网络,提高了材料的电子导电性.电化学测试表明,石墨烯片作为稳定的框架,能够有效缓冲活性物质在脱嵌锂过程中产生的体积变化,在500 mA·g^-1电流密度下循环190次后, Zn₂GeO₄@RGO复合材料的嵌锂容量仍有1189.5 mAh·g^-1;在3.2 A·g^-1的大电流密度下,嵌锂容量达到449.5mAh·g^-1,表明该复合材料具有优异的长循环稳定性和良好的倍率性能.     

锂离子电池负极硅-热解碳-石墨复合材料的制备及性能

以沥青为碳前驱物,通过加热分解法制备了具有不同热解碳含量的硅-热解碳-石墨复合材料,并测试及分析了材料的形貌、结构及电化学性能。结果表明,沥青质量在320～560℃的温度区间内迅速减小,沥青质量的减小是由于氢元素的去除。经过高温分解制得的热解碳与沥青的质量比率为65%。在硅-热解碳-石墨复合材料中,硅颗粒分散在石墨表面,热解碳覆盖在硅颗粒表面,热解碳增强了硅颗粒与石墨间的界面结合力。适当含量的热解碳增大了复合材料的放电比容量且改善了循环稳定性;过量的热解碳不能进一步提升复合材料的放电容量。     

Carbon-Coated SiO2 Composites as Promising Anode Material for Li-Ion Batteries

Porous silica-based materials are a promising alternative to graphite anodes for Li-ion batteries due to their high theoretical capacity, low discharge potential similar to pure silicon, superior cycling stability compared to silicon, abundance, and environmental friendliness. However, several challenges prevent the practical application of silica anodes, such as low coulombic efficiency and irreversible capacity losses during cycling. The main strategy to tackle the challenges of silica as an anode material has been developed to prepare carbon-coated SiO₂ composites by carbonization in argon atmosphere. A facile and eco-friendly method of preparing carbon-coated SiO₂ composites using sucrose is reported herein. The carbon-coated SiO₂ composites were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, thermogravimetry, transmission and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, cyclic voltammetry, and charge–discharge cycling. A C/SiO₂-0.085 M calendered electrode displays the best cycling stability, capacity of 714.3 mAh·g⁻¹, and coulombic efficiency as well as the lowest charge transfer resistance over 200 cycles without electrode degradation. The electrochemical performance improvement could be attributed to the positive effect of the carbon thin layer that can effectively diminish interfacial impedance.     

CoO填充多壁碳纳米管作为锂离子电池负极材料

碳纳米管自1990年被日本科学家Iijima发现以来[1],由于其独特的结构组成而具有良好的强度和弹性模量、高比表面积、良好的耐腐蚀性和导电性等特点受到了广泛的关注,并已在催化剂载体、纳米电子器件、储能材料、复合功能材料等诸多领域得到应用。多壁碳纳米管(MWCNT)是由多层石墨卷绕而成的同心圆筒,石墨层间距约为0.034nm,管径一般为几十纳米,管长可达数微米,因此多壁碳纳米管具有较高的长径比,可以被看作一维纳米线。由于多壁碳纳米管在管壁之间和管腔之中存在大量空间,为锂离子的嵌入提供了可能,因此近年来关于多壁碳纳米管储锂的研究…     

Nanowire of WP as a High-Performance Anode Material for Sodium-Ion Batteries

The design and development of electrode materials with high specific capacity and long cycling life for sodium-ion batteries (SIBs) is still a critical challenge. In this communication, we report the development of tungsten phosphide (WP) nanowire on carbon cloth (WP/CC) as an anode for SIBs. The WP/CC exhibits superior sodium storage capability with 502 mA h g⁻¹ at 0.1 A g⁻¹. Moreover, this anode is capable of delivering a long lifespan at 2 A g⁻¹ with an excellent capacity retention of 99 % after 1000 cycles.     

CoS2/N-Doped Hollow Spheres as an Anode Material for High-Performance Sodium-Ion Batteries

In this work, we first synthesized polyacrylic acid (PAA) spheres and then used PAA as a template to load Co(OH)₂ particles onto its surface. The product of CoS₂ nanoparticles dispersed in N-doped hollow spheres (N-HCS) was prepared through sulfurization treatment (CoS₂/S@N-HCS). During the sulfuration process, sulfur penetrates into the PAA, embedding into the graphite layer along with the carbonization process. It was found that during the charging and discharging process, the sulfur in the carbon layer will gradually dissolve out, thereby forming new ion diffusion channels in the carbon spheres and exposing more CoS₂ active sites. The CoS₂/S@N-HCS composite exhibits a specific capacity of 729.6 mAh g⁻¹ after 500 cycles at a current density of 1 A g⁻¹. The sodium-storage mechanism and reaction kinetics of the materials were further measured by in-situ electrochemical impedance spectroscopy, ex-situ X-ray diffraction, capacitance performance evaluation, and galvanostatic intermittent titration technique. The excellent cycling performance and rate capability demonstrated that the CoS₂/S@N-HCS is a potential and prospective anode material for sodium-ion batteries.     

中空核壳结构Ni1.2Co0.8P@N-C钠离子电池负极材料的制备及拉曼研究

本文设计制备了一种新型的氮掺杂碳包覆镍钴双金属磷化物中空核壳结构纳米立方体(Ni_1.2Co_0.8P@N-C)作为钠离子电池负极材料. 该材料以镍钴类普鲁士蓝(PBA)纳米粒子为模板,先后经水热法、磷化法和高温碳化处理后合成. 将其作为活性材料应用在钠离子电池中,该材料展现出优异的循环稳定性,当以100 mA·g^-1的电流密度循环至200圈时,该材料的库仑效率保持在99.3%. 进一步通过对不同电位下Ni_1.2Co_0.8P@N-C材料中的氮掺杂碳进行原位拉曼光谱测试,结果显示钠离子在氮掺杂的碳壳中的脱嵌行为具有较大程度的可逆性,研究结果对钠离子电池充放电过程的后续电化学研究提供了有价值的信息.     

金属有机框架衍生的高性能锂离子电池负极Co3O4/C复合材料

为克服Co_3O_4负极材料导电率低、循环稳定性差的缺点,选择Co_2(NDC)_2DMF_2(NDC=1,4-萘二甲酸根)为前驱体采用两步煅烧工艺,制备了具有高碳含量的Co_3O_4/C复合材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和拉曼光谱对样品进行了表征。采用热重分析法(TGA)测定了Co_3O_4/C中非晶态碳的含量。作为锂离子电池的负极材料,Co_3O_4/C具有高的可逆比容量、优异的循环性能(在200 m A·g~(-1)的电流密度下,循环200圈后放电比容量稳定保持在1 000 mAh·g~(-1))和良好的倍率性能(在100、200、500、1 000和2 000 mA·g~(-1)的电流密度下,放电比容量为分别1 076.3、976.2、872.9、783.6和670.1 mAh·g~(-1))。材料优异的电化学性能归结为有机配体衍生的高含量非晶态碳的导电和缓冲作用有利于电子的快速传递并有效减缓了金属氧化物充放电过程中的体积膨胀。     

功率型锂离子电池负极材料TiO2/石墨烯的制备及其电化学性能研究

采用无表面活性剂回流法制备了蜂窝状TiO2/石墨烯(GNs)复合材料.扫描电子显微镜(SEM)及透射电子显微镜(TEM)表征结果表明,TiO2颗粒约5～10 nm,均匀地分散在石墨烯的表面.锂电池测试显示,1C充电容量稳定在240.1 mAh.g-1;30C充电容量为169.5 mAh.g-1;当电流调回1C时,其充电容量仍可完全恢复(241.7 mAh.g-1);10C 300周期循环电极容量保持率为89.8%.     

Engineering of Silicon Core-Shell Structures for Li-ion Anodes

The amount of silicon in anode materials for Li-ion batteries is still limited by the huge volume changes during charge-discharge cycles. Such changes lead to the loss of electrical contacts, as well as mechanical and surface electrolyte interphase (SEI) instabilities, strongly reducing the cycle life. Core-shell structures have attracted a vast research interest due to the possibility of modifying some properties with a judicious choice of the shell. It is, for example, possible to improve the electronic conductivity and ionic diffusion, or buffer volume variations. This review gives a comprehensive overview of the recent developments and the different strategies used for the design, synthesis and electrochemical performance of silicon-based core-shells. It is based on a selection of the main types of silicon coatings reported in the literature, including carbon, inorganic, organic and double-layer coatings, Finally, a summary of the advantages and drawbacks of these different types of core-shells as anode materials for Li-ion batteries and some insightful suggestions in regards to their use are provided.     

Three-Dimensional Carbon Framework Anchored Polyoxometalate as a High-Performance Anode for Lithium-Ion Batteries

Recently, it has become very important to develop cost-effective anode materials for the large-scale use of lithium-ion batteries (LIBs). Polyoxometalates (POMs) have been considered as one of the most promising alternatives for LIB electrodes owing to their reversible multi-electron-transfer capacity. Herein, Keggin-type [PMo₁₂O₄₀]³⁻ (donated as PMo₁₂) clusters are anchored onto a 3D microporous carbon framework derived from ZIF-8 through electrostatic interactions. The PMo₁₂ clusters can be immobilized steadily and uniformly on the carbon framework, which provides enhanced electrical conductivity and high stability. Compared with PMo₁₂ itself, the as-prepared novel 3D Carbon-PMo₁₂ composite displays a significantly improved Li-ion storage performance as an LIB anode, with excellent reversible specific capacity and rate capacity, as well as high cycling performance (discharge capacity of 985 mA h g⁻¹ after 200 cycles), which are superior to other POM-based anode materials reported so far. The high performance of the Carbon-PMo₁₂ composite can be attributed to the 3D conductive network with fast electron transport, high ratio of pseudocapacitive contribution, and evenly distributed PMo₁₂ clusters with reversible 24-electron transfer capacity. This work offers a facile way to explore novel LIB anodes consisting of electroactive molecule clusters.     

Two-Dimensional SnSe2/CNTs Hybrid Nanostructures as Anode Materials for High-Performance Lithium-Ion Batteries

Tin diselenide (SnSe₂), as an anode material, has outstanding potential for use in advanced lithium-ion batteries. However, like other tin-based anodes, SnSe₂ suffers from poor cycle life and low rate capability due to large volume expansion during the repeated Li⁺ insertion/de-insertion process. This work reports an effective and easy strategy to combine SnSe₂ and carbon nanotubes (CNTs) to form a SnSe₂/CNTs hybrid nanostructure. The synthesized SnSe₂ has a regular hexagonal shape with a typical 2D nanostructure and the carbon nanotubes combine well with the SnSe₂ nanosheets. The hybrid nanostructure can significantly reduce the serious damage to electrodes that occurs during electrochemical cycling processes. Remarkably, the SnSe₂/CNTs electrode exhibits a high reversible specific capacity of 457.6 mA h g⁻¹ at 0.1 C and 210.3 mA h g⁻¹ after 100 cycles. At a cycling rate of 0.5 C, the SnSe₂/CNTs electrode can still achieve a high value of 176.5 mA h g⁻¹, whereas a value of 45.8 mA h g⁻¹ is achieved for the pure SnSe₂ electrode. The enhanced electrochemical performance of the SnSe₂/CNTs electrode demonstrates its great potential for use in lithium-ion batteries. Thus, this work reports a facile approach to the synthesis of SnSe₂/CNTs as a promising anode material for lithium-ion batteries.     

Recent Advances of ZnCo2O4-based Anode Materials for Li-ion Batteries

ZnCo₂O₄ has been attracted wide research attention as a promising anode material for lithium-ion batteries (LIBs) in recent years based on its high theoretical specific capacity, low toxicity as well as stable chemical properties. However, the further large-scale application of pristine ZnCo₂O₄ anode have been impeded because of its undesirable Li⁺ ion conductivity, low electronic conductivity, and finite stability of electrolytes at high potentials. Recently, optimizing the micro/nano structure, modification with carbonaceous materials, incorporation with metal oxides and constructing a binder-free structure on conductive substrate for ZnCo₂O₄-based materials have been verified as promising effective routes for solving the above problems. In this review, the recent advances in underlying reaction mechanisms, synthetic methods and strategies for improving the performance of ZnCo₂O₄ anodes are comprehensively summarized. The factors affecting the electrochemical properties of ZnCo₂O₄-based materials are mainly discussed, and paths to promote the specific capacity and cyclic stability are proposed. Finally, several insights into the future developments, challenges, and prospects of ZnCo₂O₄-based anode materials of LIBs are proposed.     

三维多级孔类石墨烯载三氧化二铁锂离子电池负极材料

采用简单的水解、热处理方法合成三氧化二铁（Fe₂O₃）负载在三维多级孔类石墨烯（3D HPG）上的复合材料. 3D HPG有效的导电网络有利于负载纳米Fe₂O₃,使其呈均匀分散状态,并有效增强纳米复合物的导电率,提高Fe₂O₃利用率,抑制纳米Fe₂O₃的团聚,从而制得稳定、高性能的锂离子电池负极材料. Fe₂O₃-3D HPG电极在50 mA·g^-1电流密度下首次放电容量达1745 mAh·g^-1,50周期放电容量保持于1095 mAh·g^-1.     

锂离子电池SiAg复合材料研究

应用机械合金化法制备了两种不同组分的Si-Ag复合材料.扫描电镜(SEM)、X射线衍射(XRD)、充放电测试和循环伏安法对该材料的微观形貌、相组成及电化学性能.研究表明,组成原子比为1∶1的复合材料具有很好的循环稳定性和可逆性,在0.2mA·cm-2的电流密度下,经50周循环后可逆容量仍保持300mAh·g-1.实验发现,借助充放电控制,即可有效提高合金材料的循环性能.     

Bismuth Nanoparticles Embedded in Carbon Spheres as Anode Materials for Sodium/Lithium‐Ion Batteries

Sodium‐ion batteries (SIBs) are regarded as an attractive alternative to lithium‐ion batteries (LIBs) for large‐scale commercial applications, because of the abundant terrestrial reserves of sodium. Exporting suitable anode materials is the key to the development of SIBs and LIBs. In this contribution, we report on the fabrication of Bi@C microspheres using aerosol spray pyrolysis technique. When used as SIBs anode materials, the Bi@C microsphere delivered a high capacity of 123.5 mAh g^?1 after 100 cycles at 100 mA g^?1. The rate performance is also impressive (specific capacities of 299, 252, 192, 141, and 90 mAh g^?1 are obtained under current densities of 0.1, 0.2, 0.5, 1, and 2 A g^?1, respectively). Furthermore, the Bi@C microsphere also proved to be suitable LIB anode materials. The excellent electrochemical performance for both SIBs and LIBs can attributed to the Bi@C microsphere structure with Bi nanoparticles uniformly dispersed in carbon spheres.     

Multiple Active Sites: Lithium Storage Mechanism of Cu‐TCNQ as an Anode Material for Lithium‐Ion Batteries

Recently, carboxylate metal‐organic framework (MOF) materials were reported to perform well as anode materials for lithium‐ion batteries (LIBs); however, the presumed lithium storage mechanism of MOFs is controversial. To gain insight into the mechanism of MOFs as anode materials for LIBs, a self‐supported Cu‐TCNQ (TCNQ: 7,7,8,8‐tetracyanoquinodimethane) film was fabricated via an in situ redox routine, and directly used as electrode for LIBs. The first discharge and charge specific capacities of the self‐supported Cu‐TCNQ electrode are 373.4 and 219.4 mAh g^?1, respectively. After 500 cycles, the reversible specific capacity of Cu‐TCNQ reaches 280.9 mAh g^?1 at a current density of 100 mA g^?1. Mutually validated data reveal that the high capacity is ascribed to the multiple‐electron redox conversion of both metal ions and ligands, as well as the reversible insertion and desertion of Li⁺ ions into the benzene rings of ligands. This work raises the expectation for MOFs as electrode materials of LIBs by utilizing multiple active sites and provides new clues for designing improved electrode materials for LIBs.     

锂离子电池硅基复合物负极材料*

作为颇有前途的锂离子电池负极材料,硅基材料的研究日益受到重视。硅基负极材料在充放电循环中体积变化过大导致的循环性能差、首次库仑效率低等始终是阻碍其商业化的主要问题。纳米化、合金化和碳包覆是有效的解决措施。本文详细论述了TiB2、TiN、TiC作为基质的硅-化合物复合物,Fe-Si、Cu-Si、Ni-Si体系的硅-金属复合物和硅-碳复合物的研究进展。在硅-碳复合物的研究上,综述了分别采用热解法、球磨法、球磨-热解法、化学聚合法合成,以聚吡咯、聚氯乙烯、聚丙烯腈、间苯二酚-甲醛、柠檬酸、环氧树脂等为碳源的研究进展,同时也综述了Si/碳纳米管复合电极材料的研究情况。     

二维层状氮化二钙作为钠离子电池负极材料

以Ca₃N₂为前驱体,用高温热解法制备了2D层状结构Ca₂N 并用X射线和扫描电镜对Ca₂N的组成、结构和形貌进行了表征。 作为钠离子电池新型负极材料,在50 mA/g电流密度充放电,首次放电比容量可达584 mA·h/g,可逆比容量达180 mA·h/g。在2000 mA/g大电流密度下,仍有70 mA·h/g。     

二氧化锡/碳气凝胶的制备与电化学性能研究

应用真空浸渍法制备二氧化锡/碳气凝胶的复合材料. XRD、BET、SEM及TEM等测试结果显示,二氧化锡纳米颗粒（5~10 nm）均匀地填充在碳气凝胶的孔道内部. 在100 mA/g的电流密度下经过100周次充放电测试,该材料的容量保持率为首次循环的61.9%.