Oxidation of Enones for Regioselective [3+2] Cycloaddition through γ-Enone Radical Intermediates

Herein, an oxidization reaction of enones with a Cu^II complex that leads to a new type of regioselective [3+2] cycloaddition is reported. Highly functionalized cyclopentenes and spirocyclic compounds are obtained in moderate-to-good yields. This cycloaddition reaction occurred through the formation of γ-enone radicals, providing a rarely explored reactivity pattern for enones.     

Palladium-Catalyzed [3+2] and [2+2+2] Annulations of 4-Iodo-2-quinolones with Activated Alkynes through Selective C−H Activation

The palladium-catalyzed reaction of 4-iodo-2-quinolones with activated alkynes was investigated. Cyclopenta[de]quinoline-2(1 H)-ones and/or phenanthridine-6(5 H)-ones were obtained through [3+2] annulation involving aromatic C−H activation or [2+2+2] annulation involving vinylic C−H activation, respectively. Reasonable mechanisms for the formation of these annulation products have been proposed based on density functional theory calculations.     

Synthesis and structure of antimony iodide complexes: [Ph3MeP] + 2 [SbI5]2−, [Ph3MeP] + 3 [Sb3I12]3−·Me2C=O, [Ph3MeP] + 3 [Sb3I12]3−, and [Ph3MeP] + 3 [Sb2I9]3−

Complexes with antimony-containing anions, [Ph₃MeP] ₊ ² [SbI₅]^2? (I), [Ph₃MeP] ₊ ² [Sb₃I₁₂]^3? (II), [Ph₃MeP] ₊ ³ [Sb₃I₁₂]^3? · Me₂C=O (III), and [Ph₃MeP] ₊ ³ [Sb₂I₉]^3? (IV), were synthesized by reacting triphenylmethylphosphonium iodide with antimony iodide. The central atom in the cations of the complexes has a distorted tetrahedral coordination. In the trinuclear anions of complexes II and III, each of the terminal SbI₃ groups is bound to the central Sb atom through two μ₂- and one μ₃ iodine bridges (SbSbSb angles are 103.0° and 102.2°, respectively). In the binuclear anion of complex IV, antimony atoms are linked with each other via three bridging iodine atoms.     

Catalytic Formal [2π+2σ] Cycloaddition of Aldehydes with Bicyclobutanes: Expedient Access to Polysubstituted 2-Oxabicyclo[2.1.1]hexanes

Synthesis of bicyclic scaffolds has attracted tremendous attention because they are playing an important role as saturated bioisosteres of benzenoids in modern drug discovery. Here, we report a BF₃-catalyzed [2π+2σ] cycloaddition of aldehydes with bicyclo[1.1.0]butanes (BCBs) to access polysubstituted 2-oxabicyclo[2.1.1]hexanes. A new kind of BCB containing an acyl pyrazole group was invented, which not only significantly facilitates the reactions, but can also serve as a handle for diverse downstream transformations. Furthermore, aryl and vinyl epoxides can also be utilized as substrates which undergo cycloaddition with BCBs after in situ rearrangement to aldehydes. We anticipate that our results will promote access to challenging sp³-rich bicyclic frameworks and the exploration of BCB-based cycloaddition chemistry.     

Interaction of [Mo6Cl14]2− with H2Se: Selective Preparation of [Mo6SeCl13]3−

Reaction of [Mo₆(μ₃-Cl)₈Cl₆]²⁻ with H₂Se, generated in situ from ZnSe and 4 M HCl under hydrothermal conditions lead to the substitution of one or two bridging chlorides, depending on the reagents ratio. With the Mo₆/ZnSe 1:3 molar ratio [Mo₆(μ₃-SeCl₇)Cl₆]³⁻ forms selectively in high yield. Further substitution is more hindered, and even at 1:20 cluster-to-selenide molar ratio a mixture of [Mo₆(μ₃-SeCl₇)Cl₆]³⁻ and [Mo₆(μ₃-Se₂Cl₆)Cl₆]⁴⁻ is formed. The products were characterized by X-ray, Raman spectra and electrospray ionization mass spectrometry.     

Synthesis and structure of bismuth-containing complexes [Ph3PMe] 2 + [BiI5]2− and [Ph3PMe] 2 + [BiI5 · C5H5N]2− · C5H5N

The complexes [Ph₃PMe] ₂ ⁺ [BiI₅]^2? (I) and [Ph₃PMe] ₂ ⁺ [BiI₅ · C ₅H₅N]^2? · C ₅H₅N (II) were synthesized by the reaction of bismuth triiodide with triphenylmethylphosphonium iodide, and their structures were determined by X-ray diffraction analysis. The P atom in cation I has slightly distorted tetragonal coordination polyhedron (the CPC angles 109.42(4)° and 109.52(4)°, the bond lengths P-C_Ph 1.779(2), P-C_Me 1.793(1) Å. The Bi atom in the anion of complex I has an ideal trigonal-bipyramidal coordination polyhedron (Bi-I_eq 3.0031(4), Bi-I_eq 3.0485(5) Å). The crystal of complex II consists of the anions [BiI₅ · C ₅H₅N]^2?, solvated pyridine molecules, and two types of crystallographically independent tetrahedral triphenylmethylphosphonium cations (the angles CPC 106.9(1)°–111.7(1)°, the distances P-C_Ph 1.785(3)–1.792(3), P-C_Me 1.793(3), 1.786(3) Å). The Bi atoms in the anion of complex II have a distorted octahedral coordination polyhedron (Bi-I 3.0878(4)–3.1240(3), Bi-N(1) 2.628(3) Å).     

Formal [4+2] cycloaddition of cyclobutanones bearing alkyne–cobalt complex at their 3-positions

Cyclobutanones bearing an alkyne–cobalt complex at their 3-positions reacted with aldehydes to give formal [4+2] cycloadducts by using tin(IV) chloride as a Lewis acid. Highly substituted tetrahydropyrone derivatives were stereoselectively prepared by this method.     

Brønsted Base-Catalyzed Formal Reductive [3+2] Annulation of 4,4,4-Trifluorocrotonate and α-Iminoketones

A formal reductive [3+2] annulation of 4,4,4-trifluorocrotonate and α-iminoketones was developed under Brønsted base catalysis. A single phosphazene base efficiently catalyzes the one-pot tandem reaction involving two mechanistically different elementary processes, namely the chemoselective reduction of an imine moiety of α-iminoketones with thiols as the reductant and the subsequent intermolecular Michael addition of an enolate of α-aminoketones concomitant with lactam formation. This operationally simple method provides β-trifluoromethyl-substituted γ-lactams with a tetrasubstituted carbon as a single diastereomer.     

Cu-catalyzed asymmetric [3+2] cycloaddition of α-iminoamides with activated olefins

A variety of 2-amido pyrrolidines, including Weinreb-type amides, have been prepared with very high exo diastereoselectivity and enantioselectivitiy in the reaction of α-iminoamides with activated alkenes catalyzed by Cu(I)-Segphos ligands.     

Copper-Catalyzed Regioselective [3+3] Annulations of Alkynyl Ketimines with α-Cyano Ketones: the Synthesis of Polysubstituted 4H-Pyran Derivatives with a CF3-Containing Quaternary Center

Regioselective [3+3] annulation of alkynyl ketimines with α-cyano ketones for the synthesis of polysubstituted 4H-pyran derivatives with a quaternary CF₃-containing center has been realized by using Cu(OAc)₂ as the catalyst. The novel strategy tolerates a wide range of α-CF₃ alkynyl ketimines and α-cyano ketones with both aryl and alkyl substitutents. A preliminary asymmetric synthesis of chiral product 3 has been attempted by using copper and chiral thiourea as the cocatalyst with excellent yields (86-99 %) and good enantioselectivities (71–78 % ee). Furthermore, product 3 aa could be obtained on a gram-scale reaction with 75 % yield and 99 % ee after recrystallization. Several products were also transformed readily. Control experiments indicate that the reaction involves a process with a base-catalyzed or chiral thiourea-catalyzed Mannich-type reaction followed by a highly regioselective copper-catalyzed ring-closing reaction on the alkynyl moiety in a 6-endo-dig fashion.     

Iridium-catalyzed [2+2+2] cycloaddition of α,ω-diynes with isocyanates

[Ir(cod)Cl](2)/BINAP was found to be an efficient catalyst for the [2+2+2] cycloaddition of α,ω-diynes with isocyanates to give 2-pyridones. A wide range of isocyanates can be used for this reaction. Both aliphatic and aromatic isocyanates smoothly reacted with α,ω-diynes to give 2-pyridones in high yields. Aliphatic isocyanates were more reactive than aromatic isocyanates. For aromatic isocyanates, the electronic properties of the substituents affected the reactivity: electron-donating substituents enhanced the reaction. The reaction of unsymmetrical α,ω-diynes possessing two different internal alkyne moieties with isocyanates was regiospecific and gave a single product. This regioselectivity could be explained by the reaction of iridacyclopentadiene with a nitrogen-carbon double bond. The regioselectivity of the reaction of malonate-derived diyne was controlled by a steric effect, while that of the reaction of ester-tethered diyne was controlled by an electronic effect. [Ir(cod)Cl](2)/chiral diphosphine catalyst could be used for the enantioselective synthesis of C-N axially chiral 2-pyridone. The reaction of diyne 1a with o-methoxyphenyl isocyanate (7a) gave C-N axially chiral 2-pyridone (R)-8aa in 78% yield with 94% ee.     

Iridium-catalyzed [2 + 2 + 2] cycloaddition of α,ω-diynes with nitriles

[Ir(cod)Cl](2)/DPPF or BINAP efficiently catalyzed the cycloaddition of α,ω-diynes with nitriles to give pyridines. The reaction can accommodate a very wide range of nitriles. Both aliphatic and aromatic nitriles smoothly reacted with α,ω-diynes to give pyridines. Ten equivalents of unactivated aliphatic nitrile were enough to give the product in high yield. Aliphatic nitriles bearing an acetal or amino moiety could be used for the reaction. The highly regioselective cycloaddition of unsymmetrical diyne bearing two different internal alkyne moieties was achieved. The observed regioselectivity could be reasonably explained by considering the different reactivities of the α-position in iridacyclopentadiene. Regioselective cycloaddition was successfully applied to the synthesis of terpyridine and quinquepyridine. This chemistry was extended to a new and efficient synthesis of oligoheteroarenes. Five aromatic or heteroaromatic rings were connected in a single operation. [Ir(cod)Cl](2)/chiral diphosphine catalyst can be applied to enantioselective synthesis. Kinetic resolution of the racemic secondary benzyl nitrile catalyzed by [Ir(cod)Cl](2)/SEGPHOS gave a central carbon chiral pyridine in 80% ee. The mechanism was analyzed on the basis of the B3LYP level of density functional calculations.     

Synthesis and structures of mercury and cadmium complexes: [Ph4Sb] 2 + [Hg2I6]2−·Ph2Hg, [Ph4Sb] 2 + [E2I6]2− (E = Hg, Cd), and [Ph4Sb] 2 + [Hg4I10]2−

The reaction of pentaphenylantimony with mercury iodide affords the ionic complex [Ph₄Sb] ₂ ⁺ [Hg₂I₆]^2?·Ph₂Hg (I). The [Ph₄Sb] ₂ ⁺ [Hg₂I₆]^2? (II) and [Ph₄Sb] ₂ ⁺ [Cd₂I₆]^2? (III) complexes are synthesized from tetraphenylantimony iodide and mercury and cadmium iodides. The [Ph₄Sb] ₂ ⁺ [Hg₄I₁₀]^2? complex (IV) is prepared from tetraphenylantimony 2,4-dimethylbenzenesulfonate and mercury iodide. According to the X-ray diffraction data, the Sb atom in the [Ph₄Sb]⁺ cations of complex I has virtually ideal tetrahedral coordination (the CSbC angles are 108.09°–109.64°). In the central square fragment Hg₂I₂ of the [Hg₂I₆]^2? anion, the Hg-I_br bond lengths are 2.825 and 3.075 Å, and the terminal iodine atoms are more strongly bonded to the mercury atoms (Hg-I_term 2.691 and 2.700 Å). The [Cd₂I₆]^2? anion in complex III has a similar structure (the Cd-I_bridg and Cd-I_term distances are 2.865, 2.872 and 2.723, 2.748 Å, respectively). The anions in complex IV are joined by I…Hg (3.651 Å) and I…I (4.058 Å) interactions into an infinite dimeric network.     

Zinc-Catalyzed Asymmetric Formal [4+3] Annulation of Isoxazoles with Enynol Ethers by 6π Electrocyclization: Stereoselective Access to 2H-Azepines

6π electrocyclization has attracted interest in organic synthesis because of its high stereospecificity and atom economy in the construction of versatile 5–7-membered cycles. However, examples of asymmetric 6π electrocyclization are quite scarce, and have to rely on the use of chiral organocatalysts, and been limited to pentadienyl-anion- and triene-type 6π electrocyclizations. Described herein is a zinc-catalyzed formal [4+3] annulation of isoxazoles with 3-en-1-ynol ethers via 6π electrocyclization, leading to the site-selective synthesis of functionalized 2H-azepines and 4H-azepines in good to excellent yields with broad substrate scope. Moreover, this strategy has also been used to produce chiral 2H-azepines with high enantioselectivities (up to 97:3 e.r.). This protocol not only is the first asymmetric heptatrienyl-cation-type 6π electrocyclization, but also is the first asymmetric reaction of isoxazoles with alkynes and the first asymmetric catalysis based on ynol ethers.     

Synthesis and structure of antimony complexes [Ph3AmP] 2 + [Sb2I8 · 2DMSO]2−, [Ph3PrP] 2 + [Sb2I8 · C4H8O2]2−, and [(HOCH2CH2)3NH] 4 + [Sb4I16]4−

The reaction of equimolar amounts of triphenylamyl- and triphenylpropylphosphonium iodides and triethanolammonium iodide with antimony iodide in dimethyl sulfoxide, dioxane, or acetone gave complexes [Ph₃AmP] ₂ ⁺ [Sb₂I₈ · 2DMSO]^2?, [Ph₃PrP] ₂ ⁺ [Sb₂I₈ · C₄H₈O₂]^2?, and [(HOCH₂CH₂)₃NH] ₄ ⁺ [Sb₄I₁₆]^4?, the structure of which was established by X-ray diffraction analysis. The cations of all complexes have slightly distorted tetrahedral structure, and the antimony atoms in the anions are hexacoordinated. The crystals of the complexes have intra- and intermolecular contacts, which form the structure.     

Brønsted acid TfOH-mediated [3 + 2] cycloaddition reactions of diarylvinylidenecyclopropanes with nitriles

Diarylvinylidenecyclopropanes undergo a [3 + 2] cycloaddition reaction with MeCN in the presence of Br?nsted acid TfOH to give the corresponding 3,4-dihydro-2 H-pyrrole derivatives 2 in moderate to excellent yields under reflux within a short time. As for the diarylvinylidenecyclopropane substrate containing a strongly electron-donating methoxy group on the benzene ring, the reaction leads to the formation of a different type of 3,4-dihydro-2 H-pyrrole derivatives 4 under the same conditions.     

Thermal Behavior of N,N''''-Bis[N-(2,2,2-trinitroethyl)- N-nitro]ethylenediamine

Introduction N,N'-Bis[N-(2,2,2-trinitroethyl)-N-nitro]ethyenedi- amine (BTNEDA) is a typical nitramine compound, which is structurally shown in Figure 1. The crystal density is 1.87 gcm-3. The detonation velocity corresponding to r=1.842 gcm-3 is about 8970 ms-1.1 Therefore, BTNEDA is used as high explosive. Its thermogram has been reported.2 In this paper, its kinetic parameters of the exothermic decomposition reaction are described. This is quite useful in the evaluation of its ther…     

Dearomatization of 3-Nitroindoles with Highly γ-Functionalized Allenoates in Formal (3+2) Cycloadditions

3-Nitroindoles are easily reacted with highly substituted γ-allenoates in the presence of a commercially available phosphine catalyst. For instance, allenoates derived from biomolecules such as amino and deoxycholic acids are combined for the first time with 3-nitroindole. The corresponding dearomatized (3+2) tricyclic cycloadducts are obtained as α-regioisomers exclusively. DFT computations shed light on this multi-step reaction mechanism and on the selectivities observed in the sequence.     

Dearomative [4 + 2] cycloaddition of 3-nitroindoles with ortho-amino Morita−Baylis−Hillman carbonates to forge indole-fused quinolines

A dearomative [4 + 2] cycloaddition of 3-nitroindoles ortho-amino Morita−Baylis−Hillman carbonates was established under mild conditions. This method provides an efficient and practical approach for delivering tetrahydro-5H-indolo[2,3-b]quinolines containing three contiguous stereocenters, two tertiary and one quaternary, in high yield (up to 95%) with excellent diastereoselectivity (all cases >25:1 dr). The potential synthetic applications of this strategy were also highlighted by the scale-up experiment and further synthetic transformation. Moreover, the structure and relative configuration of the cycloadduct was unequivocally confirmed by single-crystal X-ray diffraction.     

The excited-state geometry of [Re2Cl8]2−

We report the luminescence spectrum of a single crystal of [Bu₄N]₂[Re₂Cl₈] at ≈20 K. The spectrum shows progressions in the Re-Re stretching vibration v₁ based on an electronic origin at 14161 cm⁻¹ and on false origins. The luminescence spectrum exhibits a “mirror-image” relationship to the absorption spectrum and is interpreted as showing that the transition originates from the ¹δδ¹ excited state of the eclipsed ion.