Membranes with Fast and Selective Gas‐Transport Channels of Laminar Graphene Oxide for Efficient CO2 Capture

Graphene oxide (GO) nanosheets were engineered to be assembled into laminar structures having fast and selective transport channels for gas separation. With molecular‐sieving interlayer spaces and straight diffusion pathways, the GO laminates endowed as‐prepared membranes with excellent preferential CO₂ permeation performance (CO₂ permeability: 100 Barrer, CO₂/N₂ selectivity: 91) and extraordinary operational stability (>6000 min), which are attractive for implementation of practical CO₂ capture.     

MIL-101(Cr) Microporous Nanocrystals Intercalating Graphene Oxide Membrane for Efficient Hydrogen Purification

Graphene oxide (GO) is a promising two-dimensional building block for fabricating high-performance gas separation membranes. Whereas the tortuous transport pathway may increase the transport distance and lead to a low gas permeation rate, introducing spacers into GO laminates is an effective strategy to enlarge the interlayer channel for enhanced gas permeance. Herein, we propose to intercalate CO₂-philic MIL-101(Cr) metal-organic framework nanocrystals into the GO laminates to construct a 2D/3D hybrid structure for gas separation. The interlayer channels were partially opened up to accelerate gas permeation. Meanwhile, the intrinsic pores of MIL-101 provided additional transport pathways, and the affinity of MIL-101 to CO₂ molecules resulted in higher H₂/CO₂ diffusion selectivity, leading to a simultaneous enhancement in gas permeance and separation selectivity. The MIL-101(Cr)/GO membrane with optimal structures exhibited outstanding and stable mixed-gas separation performance with H₂ permeance of 67.5 GPU and H₂/CO₂ selectivity of 30.3 during the 120-h continuous test, demonstrating its potential in H₂ purification application.     

Graphene Oxide Membranes with Heterogeneous Nanodomains for Efficient CO2 Separations

Achieving high membrane performance in terms of gas permeance and carbon dioxide selectivity is an important target in carbon capture. Aiming to manipulate the channel affinity towards CO₂ to implement efficient separations, gas separation membranes containing CO₂‐philic and non‐CO₂‐philic nanodomains in the interlayer channels of graphene oxide (GO) were formed by intercalating poly(ethylene glycol) diamines (PEGDA). PEGDA reacts with epoxy groups on the GO surface, constructing CO₂‐philic nanodomains and rendering a high sorption capacity, whereas unreacted GO surfaces give non‐CO₂‐philic nanodomains, rendering low‐friction diffusion. Owing to the orderly stacking of nanochannels through cross‐linking and the heterogeneous nanodomains with moderate CO₂ affinity, a GO‐PEGDA500 membrane exhibits a high CO₂ permeance of 175.5 GPU and a CO₂/CH₄ selectivity of 69.5, which is the highest performance reported for dry‐state GO‐stacking membranes.     

Pebax‐Based Membrane Filled with Two‐Dimensional Mxene Nanosheets for Efficient CO2 Capture

Mixed matrix membranes (MMMs) made from inorganic fillers and polymers is a kind of promising candidate for gas separation. In this work, two‐dimensional MXene nanosheets were synthesized and incorporated into a polyether‐polyamide block copolymer (Pebax) matrix to fabricate MMM for CO₂ capture. The physicochemical properties of MXene nanosheets and MXene/Pebax membranes were studied systematically. The introduction of MXene nanosheets provided additional molecular transport channels and meanwhile enhanced the CO₂ adsorption capacity, thereby enhancing both the CO₂ peremance and CO₂/N₂ selectivity of Pebax membrane. The optimized MXene/Pebax membrane with a MXene loading of 0.15 wt % displayed a high separation performance with a CO₂ permeance of 21.6 GPU and a CO₂/N₂ selectivity of 72.5, showing potential application in CO₂ capture.     

Continuous Porous Aromatic Framework Membranes with Modifiable Sites for Optimized Gas Separation

Continuous microporous membranes are widely studied for gas separation, due to their low energy premium and strong molecular specificity. Porous aromatic frameworks (PAFs) with their exceptional stability and structural flexibility are suited to a wide range of separations. Main-stream PAF-based membranes are usually prepared with polymeric matrices, but their discrete entities and boundary defects weaken their selectivity and permeability. The synthesis of continuous PAF membranes is still a major challenge because PAFs are insoluble. Herein, we successfully synthesized a continuous PAF membrane for gas separation. Both pore size and chemistry of the PAF membrane were modified by ion-exchange, resulting in good selectivity and permeance for the gas mixtures H₂/N₂ and CO₂/N₂. The membrane with Br^? as a counter ion in the framework exhibited a H₂/N₂ selectivity of 72.7 with a H₂ permeance of 51844 gas permeation units (GPU). When the counter ions were replaced by BF₄^?, the membrane showed a CO₂ permeance of 23058 GPU, and an optimized CO₂/N₂ selectivity of 60.0. Our results show that continuous PAF membranes with modifiable pores are promising for various gas separation situations.     

Defect‐Free Mixed‐Matrix Membranes with Hydrophilic Metal‐Organic Polyhedra for Efficient Carbon Dioxide Separation

Defect‐free mixed‐matrix membranes (MMMs) were prepared by incorporating hydrophilic metal‐organic polyhedra (MOPs) into cross‐linked polyethylene oxide (XLPEO) for efficient CO₂ separation. Hydrophilic MOPs with triethylene glycol pendant groups, which were assembled by 5‐tri(ethylene glycol) monomethyl ether isophthalic acid and Cu^II ions, were uniformly dispersed in XLPEO without particle agglomeration. Compared to conventional neat XLPEO, the homogenous dispersion of EG₃‐MOPs in XLPEO enhanced CO₂ permeability of MMMs. Upon increasing the amount of EG₃‐MOPs, the membrane performance such as CO₂/N₂ selectivity was steadily improved because of unsaturated Cu^II sites at paddle‐wheel units, which was confirmed by Cu K‐edge XANES and TPD analysis. Therefore, such defect‐free MMMs with unsaturated metal sites would contribute to enhance CO₂ separation performance.     

Preparation of mixed matrix membranes based on polyimide and aminated graphene oxide for CO2 separation

The aminated graphene oxide (GO) was prepared by the functionalization of pristine GO with ethylenediamine and then dispersed into the poly(amic acid) (the precursor of polyimide [PI]) solution followed by the chemical imidization to successfully fabricate the PI/amine‐functionalized GO mixed matrix membranes (MMMs) using in‐situ polymerization method. Chemical structure and morphology of the GO before and after amine modification were characterized by scanning electron microscopy, Raman spectrum, Fourier transform infrared, and X‐ray photoelectron spectroscopy. Scanning electron microscopy indicated that fine dispersion of GO throughout PI matrix was achieved, which indicates that the in‐situ polymerization approach can enhance the interfacial interaction between the GO and the PI matrix, and then improve the dispersion of carbon material in the polymer matrix. Compared with the conventional solution mixture method, the MMMs prepared with in‐situ polymerization method showed excellent CO₂ permeability and CO₂/N₂ selectivity. The MMMs doped with 3 wt.% aminated GO exhibited maximum gas separation performance with a CO₂ permeability of 12.34 Barrer and a CO₂/N₂ selectivity of 38.56. These results suggest that the amino groups on GO have strong interaction with the CO₂ molecules, which can significantly increase the solubility of polar gas. Our results provide an easy and efficient way to prepare MMMs with good mechanical behavior and excellent gas separation performance.     

Lattice polarization effects in electrochromic switching in WO3−x films studied by pulse-nanogravimetric technique

The interactions of various types of cations with the tungsten trioxide lattice have been investigated to evaluate possible intercalation of these cations and the occurrence of lattice polarization leading to the near-surface structural lattice damage. The interactions of cations, such as the large monovalent cations (K⁺, Et₄N⁺, CtMe₃N⁺ cations), transition metal dications (Ni²⁺), heavy metal ions (Cd²⁺), and representative lanthanides (La³⁺) and actinides (Th⁴⁺), in competition with intercalation of H⁺ ions have been investigated using pulse-nanogravimetric technique. The effects of these cations in electrochromic processes of WO₃ proceeding during cathodic reduction have been assessed. For all of the metal ions studied, a large increase in the apparent mass uptake (up to eightfold) in comparison to pure H⁺ ion ingress was observed upon the film coloration induced by a cathodic potential pulse. The experiments indicate that the apparent mass gains, although large, are insufficient to confirm predominant contribution of metal ions in the ion transport along the channels in WO₃ lattice. The lower decoloration rate in the case of Ni²⁺ ions, in comparison to H⁺ and other transition metal cations (Cd²⁺), has been attributed to a slow dissociation of Ni²⁺ ions from lattice-bound oxygen atoms. For et₄N⁺ cation, which is too large to enter channels in WO₃, a dissociative reduction of the WO₃ and severe lattice damage was observed. Among the metal ions investigated, only K⁺ ions have been found to cause a dissociative reduction of WO₃ and near-surface lattice damage. Strong lattice polarization effects and irreversible binding have been found for La³⁺ and Th⁴⁺ cations.     

Metal‐Substituted Zeolitic Imidazolate Framework ZIF‐108: Gas‐Sorption and Membrane‐Separation Properties

A series of dual‐metal zeolitic imidazolate framework (ZIF) crystals with SOD and RHO topologies was synthesised by metal substitution from ZIF‐108 (Zn(2‐nitroimidazolate)₂, SOD topology) as the parent material. This was based on the concept that metal substitution of ZIF‐108 requires a much lower activation energy than homogenous nucleation owing to the metastability of ZIF‐108. In‐depth investigations of the formation processes of the daughter ZIFs indicated that the transformation of ZIF‐108 is a dissolution/heterogeneous nucleation process. Typical isostructural Co²⁺ substitution mainly occurs at the outer surface of ZIF‐108 and results in a core–shell structure. On the contrary, the Cu²⁺‐substituted ZIF has a RHO topology with a homogeneous distribution of Cu²⁺ ions in the structure. Substitution with Ni²⁺ resulted in a remarkable enhancement in adsorption selectivity toward CO₂ over N₂ by a factor of up to 227. With Co²⁺‐substituted nanoparticles as inorganic filler, a mixed matrix membrane based on polysulfone displayed greatly improved performance in the separation of H₂/CH₄, CO₂/N₂ and CO₂/CH₄.     

A Cationic MOF with High Uptake and Selectivity for CO2 due to Multiple CO2‐Philic Sites

The reaction of N‐rich pyrazinyl triazolyl carboxyl ligand 3‐(4‐carboxylbenzene)‐5‐(2‐pyrazinyl)‐1H‐1,2,4‐triazole (H₂cbptz) with MnCl₂ afforded 3D cationic metal–organic framework (MOF) [Mn₂(Hcbptz)₂(Cl)(H₂O)]Cl ? DMF ? 0.5 CH₃CN ( 1 ), which has an unusual (3,4)‐connected 3,4T1 topology and 1D channels composed of cavities. MOF 1 has a very polar framework that contains exposed metal sites, uncoordinated N atoms, narrow channels, and Cl^? basic sites, which lead to not only high CO₂ uptake, but also remarkably selective adsorption of CO₂ over N₂ and CH₄ at 298–333 K. The multiple CO₂‐philic sites were identified by grand canonical Monte Carlo simulations. Moreover, 1 shows excellent stability in natural air environment. These advantages make 1 a very promising candidate in post‐combustion CO₂ capture, natural‐gas upgrading, and landfill gas‐purification processes.     

Enhanced CO2-selective behavior of Pebax-1657: A comparative study between the influence of graphene-based fillers

Mixed matrix membranes (MMMs) containing graphene-based fillers have attracted considerable attention in the field of gas separation. In this study, two types of graphene derivatives (Graphene (G) and Graphene Oxide (GO)) were embedded into the poly-ether-block-amide (Pebax) based MMM to investigate and compare CO₂/N₂ separation at various filler loadings (0.3–1 wt%). The morphologies of the prepared neat Pebax and MMMs were characterized by SEM, XRD, FTIR and DSC. Compared with the neat Pebax, the permeability of all gases was increased by adding filler content in the MMMs due to the crystallinity decrement of the polyamide (PA) segment. The best separation performance of the Pebax/G MMMs occurred at 0.7 wt%, where the CO₂ permeability increased from 26.51 to 44.78 Barrer (~1.7 times). Also, for the Pebax/GO MMMs, the CO₂ permeability was increased up to 58.96 Barrer (~2.2 times) by adding 0.5 wt% filler. This further gas permeation increment for the Pebax/GO sample was attributed to the higher affinity of GO nanosheets to CO₂ sorption, which can facilitate CO₂ gas transition through the membrane matrix. Moreover, the CO₂/N₂ ideal selectivity increased from 74.26 for the neat Pebax to 111.95 (~1.5 times) and 120.72 (~1.62 times) by adding 0.7 wt% G (Pebax/G-0.7) and 1 wt% GO (Pebax/GO-1) into Pebax, respectively. As a consequence, graphene derivatives can be recognized as a promising developer of permselectivity (permeability and selectivity) of the MMMs.     

CC Bonding of Graphene Oxide on 4‐Aminophenyl Modified Gold Electrodes towards Simultaneous Detection of Heavy Metal Ions

This paper studied the electrochemical sensors based on C? C bonding of graphene oxide (GO) on π‐conjugated aromatic group modified gold electrodes for simultaneous detection of heavy metal ions. For comparison, another sensing interface Au‐Ph‐NH‐CO‐GO, in which GO was modified to Au‐Ph‐NH₂ interfaces by amide bonding. On the basis of the principle of heavy metal ions complexation with oxygenated species on GO, the fabricated sensing interfaces were used for the simultaneous determination of Pb²⁺, Cu²⁺ and Hg²⁺. The performance of two sensing interfaces for simultaneous detection of three metal ions was compared. Au‐Ph‐GO sensing interface demonstrated higher sensitivity and better repeatability than Au‐Ph‐NH‐CO‐GO sensing interface.     

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by In Situ Polymerization

Commercial ultrafiltration membranes have proliferated globally for water treatment. However, their pore sizes are too large to sieve gases. Conjugated microporous polymers (CMPs) feature well‐developed microporosity yet are difficult to be fabricated into membranes. Herein, we report a strategy to prepare molecular‐sieving membranes by partitioning the mesoscopic channels in water ultrafiltration membrane (PSU) into ultra‐micropores by space‐confined polymerization of multi‐functionalized rigid building units. Nine CMP@PSU membranes were obtained, and their separation performance for H₂/CO₂, H₂/N₂, and H₂/CH₄ pairs surpass the Robeson upper bound and rival against the best of those reported membranes. Furthermore, highly crosslinked skeletons inside the channels result in the structural robustness and transfer into the excellent aging resistance of the CMP@PSU. This strategy may shed light on the design and fabrication of high‐performance polymeric gas separation membranes.     

Molecular-Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by In Situ Polymerization

Commercial ultrafiltration membranes have proliferated globally for water treatment. However, their pore sizes are too large to sieve gases. Conjugated microporous polymers (CMPs) feature well-developed microporosity yet are difficult to be fabricated into membranes. Herein, we report a strategy to prepare molecular-sieving membranes by partitioning the mesoscopic channels in water ultrafiltration membrane (PSU) into ultra-micropores by space-confined polymerization of multi-functionalized rigid building units. Nine CMP@PSU membranes were obtained, and their separation performance for H₂/CO₂, H₂/N₂, and H₂/CH₄ pairs surpass the Robeson upper bound and rival against the best of those reported membranes. Furthermore, highly crosslinked skeletons inside the channels result in the structural robustness and transfer into the excellent aging resistance of the CMP@PSU. This strategy may shed light on the design and fabrication of high-performance polymeric gas separation membranes.     

Selective sensing of CrVI and FeIII ions in aqueous solution by an exceptionally stable TbIII-organic framework with an AIE-active ligand

We herein report a new lanthanide metal-organic framework (MOF) that exhibits excellent chemical stability, especially in the aqueous solution over a wide pH range from 1 to 14. In contrast to many reported lanthanide MOFs, this Tb-based MOF emits cyan fluorescence inherited from the integrated AIE-active ligand, rather than Ln³⁺ ions. More remarkably, its fluorescence signal features a highly selective and sensitive “turn-off” response toward CrO₄²⁻, Cr₂O₇²⁻ and Fe³⁺ ions, highlighted with the low detection limits down to 68.18, 69.85 and 138.8 ppm, respectively. Thus, the exceptional structural stability and sensing performance render this material able to be a superior luminescent sensor for heavy metal ions in wastewater.     

燃煤烟气中共存杂质对膜分离CO2性能影响的实验研究

利用自行搭建的膜分离实验台,考察了共存气态组分以及颗粒物对于聚二甲基硅氧烷/聚砜(PDMS-PSF)复合膜分离CO₂性能的影响.结果表明,共存气态组分中O₂对于膜分离CO₂有抑制作用;由于SO₂浓度显著低于CO₂,在短时间内对膜分离CO₂没影响;水汽可以促进CO₂的分离;燃煤飞灰细颗粒在分离膜表面沉积会导致膜性能的恶化.在此基础上,采用模拟湿法烟气脱硫系统装置,进行了燃煤湿法脱硫净烟气环境下的膜分离CO₂实验;在测试的50 h以内,水汽、SO₂和O₂的共同作用导致膜分离性能在前期有一定的提高,随着运行时间的延长,细颗粒物对膜的影响程度加大,导致PDMS-PSF复合膜的分离性能逐渐恶化,最终导致膜的CO₂/N₂分离因子和CO₂渗透速率分别下降了17.91%和28.21%.     

Using PDMS coated TFC-RO membranes for CO2/N2 gas separation: Experimental study,modeling and optimization

Thin film composite (TFC) reverse osmosis (RO) membranes are semipermeable membranes that are utilized in water purification or water desalination systems. Discarding these membranes after end-of-life leads to environmental problems. Reusing old TFC-RO membranes is one way to solve this problem. For this reason, in this study, used TFC-RO membranes were coated with polydimethylsiloxane (PDMS) for CO₂/N₂ gas separation application. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was utilized to confirm the crosslinking of coated PDMS. The morphology of PDMS/TFC-RO membranes was characterized using scanning electron microscopy (SEM). The parameters that can affect performance of prepared membranes (N₂ permeance and CO₂/N₂ selectivity) are concentration of PDMS solution, coating time, solvent evaporation time and curing temperature and time. Given that the used membranes don't have uniform surfaces, the first step of this study was to investigate the effect of the above mentioned factors on virgin membranes using fractional factorial design (FFD) of experiments. The results obtained showed that PDMS concentration is the most significant factor that has a negative effect on N₂ permeance and positive effect on CO₂/N₂ selectivity. The reported CO₂/N₂ selectivity of PDMS membranes was 11–12, but this selectivity for prepared PDMS/TFC-RO membranes was in the range of 6.7–22.5. After determining optimum conditions, the gas separation performance of PDMS coated used TFC-RO membrane under these conditions was finally determined. The results showed that the used membranes had a better performance than virgin membranes.     

Fabrication of the polyethersulfone/functionalized mesoporous carbon nanocomposite nanofiltration membrane for dyes and heavy metal ions removal: Experimental and quantum mechanical simulation method

The presence of industrial pollutants, especially salts, heavy metals ions, and dyes in water and wastewater is considered a serious environmental issue. To eliminate these pollutants, a high-performing nanofiltration (NF) membrane was prepared by blending the functionalized mesoporous carbon CMK-5 (F-CMK-5) nanofiller. This membrane was synthesized by introducing the active groups of sulfonyl and amide to the surface of mesoporous carbon CMK-5 through covalent functionalization. Characterizations were conducted to study the membranes' physical properties and separation performance in terms of antifouling properties and rejection of salts, heavy metal ions, and dyes. The interactions between the active sites of the nanocomposite membrane and the studied solutes, including dyes and heavy metal ions in aqueous solutions, were studied by the density functional based tight binding method and structural optimization was carried out. Insertion of the F-CMK-5 nanofiller was eventuated in a remarkable increase in surface hydrophilicity, pure water flux, and antifouling properties. For all membranes, the lowest and the highest salt rejection was obtained for NaCl and Na₂SO₄, respectively, exhibiting the characteristics of NF membranes. Moreover, M_0.3 with 0.3 wt% nanofiller showed the highest rejection for heavy metal ions (Fe²⁺ = 99.9%, Zn²⁺ = 99.9%, Cu²⁺ = 99.7%, and Pb²⁺ = 99.2%) and dyes (RB5 = 99.21, DR16 = 98.87, and MB = 98.12%), as well as high separation performance for filtration of multipollutant solutions. The reusability and 144 h uninterrupted filtration experiments for M_0.3 confirmed the stability of the membrane. The findings suggest that the PES/F-CMK-5 nanocomposite NF membrane is a promising candidate for water and wastewater treatment.     

PDMS coating of used TFC-RO membranes for O2/N2 and CO2/N2 gas separation applications

A new application for used reverse osmosis (RO) membranes as gas separation membranes was studied. In this regard, firstly, three pretreatment procedures were used to remove the foulants from the surface of used membrane and then they were coated with polydimethylsiloxane (PDMS). The results indicated that PDMS-coated used RO membranes were capable of separating O₂/N₂ and CO₂/N₂. The maximum O₂/N₂ and CO₂/N₂ selectivities of coated membranes were 5.9 and 32.5, respectively. The O₂/N₂ and CO₂/N₂ selectivities of PDMS membrane were reported in the range of 2.1–2.2 and 11–12, respectively. Finally, an economic assessment was carried out to compare prepared PDMS coated RO membranes with commercial PPO membrane. This showed that coated membranes are less expensive than PPO membrane for CO₂/N₂ gas separation. The outcome of the research was a simple method for converting used RO membranes to cost effective gas separation membranes.     

Mass transfer determining parameter in facilitated transport through di-(2-ethylhexyl) dithiophosphoric acid activated composite membranes

Activated composite membranes (ACMs) containing di-(2-ethylhexyl) dithiophosphoric acid (D2EHDTPA) as a carrier have been found to facilitate the transport and separation of several cations. This paper describes an approach to the chemical characterisation of the transport phenomena of Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Sn²⁺ and In³⁺ by an ACM. The selectivity of D2EHDTPA based ACM towards different metal ions is presented and discussed focusing in Zn²⁺ and Cd²⁺ transport and recovery. Selectivity demonstrates that zinc ions are removable from mixtures due to the different extraction strength of D2EHDTPA. Such selectivity is based on the differences of the dynamic behaviour of the metal ions transport. In addition, a correlation of the chemical behaviour of those ACM systems with the corresponding solvent extraction systems has been found.