Polymerization of N-acryloyl pyrrolidone and synthesis of graft copolymer by using the mechanism of initiation of anionic ring-opening polymerization

N-acryloyl pyrrolidone (NAP) was synthesized by reaction of pyrrolidone with acryloyl chloride. First, the polymerization of NAP and copolymerization of NAP with styrene (St) were carried out at 60°C, using 2,2′-azobisisobutyronitrile (AIBN) as an initiator. Kinetic studies showed that the rate of polymerization (R_p) could be expressed by R_p = K [AIBN]^0.5 [NAP]^1.0. The reactivity of NAP was found to be larger than that of N-methacryloyl pyrrolidone. The overall activation energy was calculated to be 24.3 kcal mole^?1. The following monomer reactivity ratio and Q and e values were obtained. NAP(M₁)—St(M₂): r₁ = 1.50, r₂ = 0.35, Q₁ = 0.42, and e₁ = 1.60. Second, graft copolymers were synthesized by reacting pyrrolidone, in the presence of a catalytic amount of its potassium salt, with poly(NAP-co-St).     

Novel amorphous perfluorocopolymeric system: Copolymers of perfluoro‐2‐methylene‐1,3‐dioxolane derivatives

Perfluorotetrahydro‐2‐methylene‐furo[3,4‐d][1,3]dioxole (monomer I ) and perfluoro‐2‐methylene‐4‐methoxymethyl‐1,3‐dioxolane (monomer II ) are soluble in perfluorinated or partially fluorinated solvents and readily polymerize in solution or in bulk when initiated by a free‐radical initiator, perfluorodibenzoyl peroxide. The copolymerization parameters have been determined with in situ ¹⁹F NMR measurements. The copolymerization reactivity ratios are r _I = 1.80 and r _II = 0.80 in 1,1,2‐trichlorotrifluoroethane at 41 °C and r _I = 0.97 and r _II = 0.85 for the bulk polymerization. These data show that this copolymerization pair has a good copolymerization tendency and yields nearly ideal random copolymers. The copolymers have only one glass‐transition temperature from 101 to 168 °C, depending on the copolymer compositions. Melting endotherms have not been observed in their differential scanning calorimetry traces, and this indicates that all the copolymers with different compositions are completely amorphous. These copolymers are thermally stable (the initial decomposition temperatures are higher than 350 °C under an N₂ atmosphere) and have low refractive indices and high optical transparency from UV to near‐infrared. Copolymer films prepared by casting were flexible and tough. These properties make the copolymers ideal candidates as optical and electrical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1613–1618, 2006     

Synthesis of styrene/methyl methacrylate copolymers by atom transfer radical polymerization: 2D NMR investigations

Copolymers of styrene and methyl methacrylate were synthesized by atom transfer radical polymerization using methyl 2‐bromopropionate as initiator and CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as catalyst. Molecular weight distributions were determined by gel permeation chromatography. The composition of the copolymer was determined by ¹H NMR. The comonomer reactivity ratios, determined by both Kelen–Tudos and nonlinear error‐in‐variables methods, were r_S = 0.64 ± 0.08, r_M = 0.63 ± 0.08 and r_S = 0.66, r_M = 0.65, respectively. The α‐methyl and carbonyl carbon resonances were found to be compositionally and configurationally sensitive. Complete spectral assignments of the ¹H and ¹³C NMR spectra of the copolymers were done by distortionless enhancement by polarization transfer and two‐dimensional NMR techniques such as heteronuclear single quantum coherence and heteronuclear multiple quantum coherence. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2076–2085, 2006     

Radical copolymerization of 2-ethylacrylic acid and methacrylic acid

Copolymers of 2-ethylacrylic acid (EAA) and methacrylic acid (MAA) were prepared in bulk and in N,N-dimethylformamide (DMF). Although precipitation of the copolymers was observed in bulk, the reaction mixtures remained apparently homogeneous in DMF. Best-fit terminal-model reactivity ratios were determined by a nonlinear least squares technique to be r_MAA = 1.14 and r_EAA = 0.23 in bulk, and r_MAA = 1.91 and r_EAA = 0.09 in 50% DMF solution. Examination of ¹³C-NMR spectra provided convincing evidence for the formation of statistical copolymers. Copolymerizations richer in MAA provided copolymers of higher molecular weights.     

Synthesis and characterization of cationic copolymers of butylacrylate and [3‐(methacryloylamino)‐propyl]trimethylammonium chloride

Cationic copolymers of butylacrylate (BA) and [3‐(methacryloylamino)‐propyl]trimethylammonium chloride (MAPTAC) were synthesized by free‐radical‐solution polymerization in methanol and ethanol. An FT‐Raman Spectrometer and NMR were used to monitor the polymerization process. The copolymers were characterized by light scattering, NMR, DSC, and thermogravimetric analysis. It was found that random copolymers could be prepared, and the molar fractions of BA and cationic monomers in the copolymers were close to the feed ratios. The copolymer prepared in methanol had a higher molecular weight than that prepared in ethanol. As the cationic monomer content increased, the glass‐transition temperature (T_g) of the copolymer also increased, whereas the thermal stability decreased. The reactivity ratios for the monomers were evaluated. The copolymerization of BA (M₁) with MAPTAC (M₂) gave reactivity ratios such as r₁ = 0.92 and r₂ = 2.61 in ethanol as well as r₁ = 0.79 and r₂ = 0.90 in methanol. This study indicated that a random copolymer containing a hydrophobic monomer (BA) and a cationic hydrophilic monomer (MAPTAC) could be prepared in a proper polar solvent such as methanol or ethanol. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1031–1039, 2001     

Reactivity ratios and microstructure determination of vinyl acetate–alkyl acrylate copolymers by NMR spectroscopy

(Vinyl acetate)/(ethyl acrylate) (V/E) and (vinyl acetate)/(butyl acrylate) (V/B) copolymers were prepared by free radical solution polymerization. ¹H-NMR spectra of copolymers were used for calculation of copolymer composition. The copolymer composition data were used for determining reactivity ratios for the copolymerization of vinyl acetate with ethyl acrylate and butyl acrylate by Kelen-Tudos (KT) and nonlinear Error in Variables methods (EVM). The reactivity ratios obtained are r_v = 0.03 ± 0.03, r_E = 4.68 ± 1.70 (KT method); r_v = 0.03 ± 0.01, r_E = 4.60 ± 0.65 (EV method) for (V/E) copolymers and r_v ? 0.03 ± 0.01, r_B ? 6.67 ± 2.17 (KT method); r_v = 0.03 ± 0.01, r_B = 7.43 ± 0.71 (EV method) for (V/B) copolymers. Microstructure was obtained in terms of the distribution of V- and E-centered triads and V- and B-centered triads for (V/E) and (V/B) copolymers respectively. Homonuclear ¹H 2D-COSY NMR spectra were also recorded to ascertain the existence of coupling between protons in (V/E) as well as (V/B) copolymers. © 1995 John Wiley & Sons, Inc.     

Preparation of high oxygen permeable transparent hybrid copolymers with silicone macro-monomers

In this study, high oxygen permeable transparent hybrid copolymers were prepared with hydrophilic monomer such as 2-hydroxyethylmethacrylate (HEMA) or N,N-dimethylacrylamide (DMAA) and mono- or difunctional silicone macro-monomer introduced methacryl groups. In HEMA-based hybrid copolymers, difunctional silicone macro-monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linker were required in order to prepare transparent hybrid materials, while high transparent DMAA-based hybrid copolymers could be prepared without EGDMA cross-linker. The polymerization kinetics investigation revealed that this difference between HEMA and DMAA in preparation condition to transparent hybrid material originated to monomer reactivity in copolymerization and DMAA showed high reactivity compared with HEMA. Moreover, DMAA-based hybrid copolymers indicated high water content and high oxygen permeability as against HEMA-based hybrid copolymers because of its low cross-linking density.     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

Characterization and optimization of poly(glycidyl methacrylate-co-styrene) synthesized by atom transfer radical polymerization

Styrene (S) and glycidyl methacrylate (GMA) copolymers were synthesized by atom transfer radical polymerization (ATRP) under different conditions. The effect of initiators, ligands, solvents, and temperature to the linear first-order kinetics and polydispersity index (PDI) was investigated for bulk polymerization. First-order kinetics was observed between linearly increasing molecular weight versus conversion and low polydispersities (PDI) were achieved for ethyl 2-bromo isobutyrate (EBiB) as an initiator and N,N′,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst. The copolymers with different compositions were synthesized using different in-feed ratios of monomers. Copolymers composition was calculated from ¹H NMR spectra which were further confirmed by quantitative ¹³C{¹H} NMR spectra. The monomer reactivity ratios were obtained with the help of Mayo-Lewis equation using genetic algorithm method. The values of reactivity ratios for glycidyl methacrylate and styrene monomers are r_G = 0.73 and r_S = 0.42, respectively.     

Initiator effect on the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline

The aim of this research was to study the effect of the initiator on the resulting monomer distribution for the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐phenyl‐2‐oxazoline (PhOx). At first, kinetic studies were performed for the homopolymerizations of both monomers at 160 °C under microwave irradiation using four initiators. These initiators have the same benzyl‐initiating group but different leaving groups, Cl^?, Br^?, I^?, and OTs^?. The basicity of the leaving group affects the ratio of covalent and cationic propagating species and, thus, the polymerization rate. The observed differences in polymerization rates could be correlated to the concentration of cationic species in the polymerization mixture as determined by ¹H NMR spectroscopy. In a next‐step, polymerization kinetics were determined for the copolymerizations of EtOx and PhOx with these four initiators. The reactivity ratios for these copolymerizations were calculated from the polymerization rates obtained for the copolymerizations. This approach allows more accurate determination of the copolymerization parameters compared to conventional methods using the composition of single polymers. When benzyl chloride (BCl) was used as an initiator, no copolymers could be obtained because its reactivity is too low for the polymerization of PhOx. With decreasing basicity of the used counterions (Br^? > I^? > OTs^?), the reactivity ratios gradually changed from r_EtOx = 10.1 and r_PhOx = 0.30 to r_EtOx = 7.9 and r_PhOx = 0.18. However, the large difference in reactivity ratios will lead to the formation of quasi‐diblock copolymers in all cases. In conclusion, the used initiator does influence the monomer distribution in the copolymers, but for the investigated system the differences were so small that no difference in the resulting polymer properties is expected. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4804–4816, 2008     

Investigation of the intramolecular structure of styrene–ethylmethacrylate copolymers by 1H- and 13C-NMR: Reassignment of 1H-NMR spectra

The compositions and sequence distributions of homogeneous styrene (S)–ethyl methacrylate (E) copolymers, obtained by low conversion solution polymerization have been studied by ¹H- and ¹³C-NMR. A new set of peak triad assignments was proposed for the δ 2.1–4.2 ppm region in the ¹H-NMR spectrum, whereby the reactivity ratios of r_S = 0.59 and r_E = 0.50 were used to establish this new assignment. The EEE and SSS blocks, present in these copolymers, have a high degree of syndiotacticity (σ_EE = 0.23, σ_SS = 0.39), whereas the ESE units are exhibiting a slight tendency toward isotacticity (σ_ES = 0.66).     

Synthesis and characterization of polytulipalin‐g‐polylactide copolymers

Graft copolymers of poly(tulipalin A) (PT) and poly(DL‐lactide) (PDLLA) (PT‐g‐PDLLA) having various graft lengths and ratios were synthesized by free‐radical copolymerization of α‐methylene‐γ‐butyrolactone (MBL) and PDLLA macromonomers (HEMA‐PDLLA) terminated by 2‐hydroxyethyl methacrylate (HEMA)‐terminated. HEMA‐PDLLA were synthesized by ring opening polymerization (ROP) of DL‐lactide in the presence of HEMA. Both HEMA‐PDLLA and the copolymers were characterized by NMR spectroscopy and gel permeation chromatography (GPC). The thermal properties of the graft copolymers were found to depend on the graft length and the ratio. The copolymers consisting of PDLLA side chains of M_n = 500 Da showed a single T_g between T_gs of the two component polymers, suggesting a miscible state of PT and PDLLA. In contrast, the copolymers consisting of PDLLA side chains of M_n = 1100, 2000, and 7000 Da showed two isolated T_g, suggesting two segregated domains. The AFM phase images of the copolymers supported the single and phase‐separated morphologies for the former and latter systems, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel acrylic macromonomer with amphiphilic character derived from Triton X‐100: Radical copolymerization with methyl methacrylate and thermal properties

This article explores the synthesis of a novel methacrylic macromonomer with an amphiphilic character derived from poly(ethylene glycol) tert‐octylphenyl ether (MT) and its respective homopolymer. To know their reactivity in radical copolymerization reactions with methyl methacrylate (MMA), a model monomer (MTm) was synthesized to determine the reactivity ratios and compare them with the low molar fractions of copolymers of MT with MMA because they were difficult to isolate. They were r_MTm = 0.97 and r_MMA = 0.95. The compositional diagrams when representing the weight fraction of MT and MTm in the feed and the copolymer suggested that a clear correlation exists between the experimental points of the model monomer MTm and the macromonomer MT ones, suggesting that the length of the side poly(ethylene oxide) chain does not affect the reactivity of the methacrylic double bond in the prepared monomers for this type of polymerization reaction. The reactivity ratios of the copolymers have a tendency for the formation of random or Bernoullian copolymers. The glass‐transition temperatures (T_g's) of the prepared copolymers were determined by differential scanning calorimetry, deviated from the Fox equation, and discussed on the basis of treatments that consider the influence of the monomeric units along the copolymer chains, determining the T_g of the corresponding alternating dyads. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1641–1649, 2003     

Esterolytic activity of imidazole-containing polymers. Synthesis and characterization of copoly[1-alkyl-4- or 5-vinylimidazole/4(5)-vinylimidazole] and its catalytic activity in the hydrolysis of p-nitrophenyl acetate

The water-soluble monomers, 1-methyl-4-vinylimidazole, 1-methyl-5-vinylimidazole, 1-ethyl-5-vinylimidazole, and 1-propyl-5-vinylimidazole have been synthesized, polymerized, and copolymerized with 4(5)-vinylimidazole. The copolymers were characterized by ¹⁴C-labeling, NMR, pK_a determination and viscosity measurements. The monomer reactivity ratios determined by ¹⁴C counting are r₁ = 1.04; r₂ = 0.94 [M₁ = 4(5)-vinylimidazole, M₂ = 1-methyl-4-vinylimidazole] and r₁ = 1.01; r₂ = 0.86 [M₁ = 4(5)-vinylimidazole, M₂ = 1-methyl-5-vinylimidazole]. The esterolytic activity of the copolymers for the hydrolysis of p-nitrophenyl acetate (PNPA) at pH 7–8 in 28.5% ethanol–water was higher than that of the mixtures of homopolymers. At pH 5–6 the esterolytic activities of the copolymers and the mixtures were similar. The most efficient esterolytic activity for PNPA hydrolysis at pH 7.11 in 28.5% ethanol–water occurred for copolymers containing 75 mole % 4(5)-vinylimidazole and for copolymers containing 1-methyl-4-vinylimidazole rather than 1-methyl-5-vinylimidazole.     

Copolymerisation of 2-hydroxyethyl methacrylate with siloxanyl monomers

Acryloxymethylpentamethyldisiloxane (AMS) and methacryloxymethylpentamethyldisiloxane (MMS) have been prepared and purified chromatographically. Some physicochemical properties have been measured for these monomers as well as for highly purified 2-hydroxyethyl methacrylate (HEMA). Hydroxyl group analysis on copolymers of AMS with HEMA and of MMS with HEMA, obtained by free radical copolymerisation to low conversion, enabled monomer reactivity ratios to be determined by several procedures. The average values were r_HEMA = 0.86, r_AMS = 0.55 and r_HEMA = 0.97, r_MMS = 0.33. These values have been invoked in computing integral curves for the instantaneous copolymer composition throughout the whole range of conversion.     

Determination of the reactivity parameters for the copolymerization of butyl acrylate with vinyl acetate

The composition of vinyl acetate–butyl acrylate copolymers obtained with batch emulsion polymerization have been studied by ¹H-NMR. Using the integrated copolymerization Meyer–Lowry equation, the apparent reactivity ratios of the two monomers were calculated as 10.67 for r₁, the reactivity ratio of butyl acrylate (BA), and 0.024 for r₂, the reactivity ratio of vinyl acetate (VAC). These results were compared with those obtained by other methods.     

N-vinylpyrrolidone and 4-vinyl Benzylchloride Copolymers: Synthesis,Characterization and Reactivity Ratios

The copolymers prepared in this study by free radical copolymerization of N-vinylpyrrolidone (M ₂) with 4-vinylbenzylchloride (M ₁) using 2,2′-azobisisobutyronotrile (AIBN) initiator in 1,4-dioxane solvent at 70°C were characterized by FTIR, ¹H-NMR and ¹³C-NMR techniques. Polymer solubility was tested in both polar and nonpolar solvents. The thermal properties were studied by thermogravimetric analysis (TGA) and differential scanning calorimeter (DSC). Copolymer compositions were established by H¹-NMR spectra, while reactivity ratios of the monomers were computed using the linearization methods viz., Fineman-Ross (FR) (r ₁ = 1.67 and r ₂ = 0.67), Kelen-Tudos (KT) (r ₁ = 1.77 and r ₂ = 0.65) and extended Kelen-Tudos (EK-T) (r ₁ = 1.72 and r ₂ = 0.63) methods at lower conversion. Furthermore, reactivity ratios in nonlinear error-in-variables method (RREVM) also compute the reactivity ratios (r ₁ = 1.76 and r ₂ = 0.66); these are found to be in good agreement with each other. The distribution of monomer sequence along the copolymer chain was calculated using a statistical method based on the calculated reactivity ratios.     

Solution copolymerization of styrene and 2-hydroxyethyl mechacrylate.

The rate of solution copolymerization of styrene (M₁) and 2-hydroxyethyl methacrylate (M₂) was investigated by dilatometry. N,N-dimethyl formamide, toluene, isopropyl alcohol, and butyl alcohol were used as solvents. Polymerization was initiated by α,α′-azobisisobutyronitrile at 60°C. The initial copolymerization rate increased nonlinearly with increasing 2-hydroxyethyl methacrylate (HEMA)/styrene ratio. The copolymerization rate was promoted by solvents containing hydroxyl groups. Two different approaches were used for the prediction of copolymerization rates. The relationships proposed for the copolymerization rates calculation involve the effects of the total monomer concentration, mole fraction of HEMA, and of the solvent type. Different reactivity ratios were found in polar and nonpolar solvents: r₁ = 0.53, r₂ = 0.59 in N,N-dimethyl formamide, isopropyl alcohol and n-butyl alcohol; r₁ = 0.50, r₂ = 1.65 in toluene. The usability of these reactivity ratios was confirmed by batch experiments.     

Atom transfer radical copolymerizationof acrylonitrile/n‐butyl acrylate: Microstructure determination by two‐dimensional nuclearmagnetic resonance spectroscopy

Atom transfer radical polymerization conditions were optimized and standardized with different initiator and catalyst systems. Acrylonitrile/n‐butyl acrylate copolymers were synthesized with 2‐bromopropionitrile as the initiator and CuCl/Cu(0)/2,2′‐bipyridine as the catalyst system. Variations of the feed composition led to copolymers with different compositions. The number‐average molecular weight and the polydispersity index were determined by gel permeation chromatography. Quantitative ¹³C{¹H} NMR was employed to determine the copolymer composition. The reactivity ratios calculated with a methodology based on the Mao–Huglin terminal model were r_A = 1.30 and r_B = 0.68 for acrylonitrile and n‐butyl acrylate, respectively. The reactivity ratios determined by the modified Kelen–Tudos method were r_A = 1.29 ± 0.01 and r_B = 0.67 ± 0.01. ¹³C{¹H} NMR and distortionless enhancement by polarization transfer (DEPT‐45, 90, and 135) were used to distinguish methyl, methylene, methine, and quaternary carbon resonance signals. The overlapping and broad signals of the copolymers were assigned completely to various compositional and configurational sequences by the correlation of one‐dimensional (¹H, ¹³C{¹H}, and DEPT) and two‐dimensional (heteronuclear single quantum coherence, total correlation spectroscopy, and heteronuclear multibond correlation) NMR spectral data. The complete spectral assignments of carbonyl and nitrile carbons were performed with the help of heteronuclear multibond correlation spectra. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2810–2825, 2005